Used Molding Machine for sale (64,937)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Direct from mold construction: ARBURG 420 C 1000-250 VARIO - Injection unit horizontally movable Year 2001, 43,600 operating hours, single owner, top condition, equipped as follows for sale: 35 mm screw, Technical level 2 servo-controlled clamping unit, cooling circuits program-controlled, 1 core pull, equipment packages 1,2,3,5,6, CF card reader. Well-maintained machine, can be inspected while in operation. Without peripherals. Dryer, conveyor, color mixer, hopper by MOTAN available at extra cost, if required. * Further machine: ARBURG 320 C 600-100 - Injection in parting line possible, Iodpfsxwa A Dsx Ag Uotb Year 2005, only 36,500 operating hours, single owner, top condition, for sale with the following equipment: 25 mm screw, 2nd screw 30 mm, system for injection in the parting line, technical level 2 servo-controlled clamping unit, cooling circuits program-controlled, 1 core pull, equipment packages 1,2,3,5,6, very well-maintained machine, can be inspected while in operation. EUR 8,500, without peripherals— Dryer, conveyor, hopper by DIGICOLOR and sprue picker by GEIGER MiniServo available at extra cost, if required.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 58211, clamping force: 4,500 kN, The machine is powered and can be demonstrated in working condition. Itsdpfx Aox Af Ayjg Ueb

Condition: excellent (used), clamping force: 1,300 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, injection weight: 289 g, mold height (min.): 300 mm, General Data Model: Krauss Maffei KM 130/750 CX Year of manufacture: 2011 Control system: MC5 Machine weight: 6,200 kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m ⚙️ Injection Unit Unit: .../750 Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 289.4 g Specific injection pressure: 2,336 bar Screw L/D ratio: 22.4 🔩 Clamping Unit Clamping unit: 130/... Clamping force: 130 t Platen dimensions: 745 × 770 mm Tie bar spacing: 470 × 470 mm Mould height (min.): 300 mm Opening stroke: 600 mm Iedpfxox S Hipo Ag Uetb Max. daylight: 900 mm Ejector force: 22.6 kN Ejector stroke: 150 mm 🧰 Additional Equipment - Hydraulic core - Pneumatic valve 4-section rotameters (2 pcs.)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 70 mm, displacement volume: 1,155 cm³, injection pressure: 1,482 bar, ejector stroke: 250 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 4,000 kN Mounting platen (h x v): 1,400 x 1,080 mm Minimum mold height: 350 mm Opening stroke: 950 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection Unit Screw diameter: 70 mm Injection pressure: 1,482 bar Shot volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection flow: 419 cm³/s Screw speed: 183 rpm Nozzle contact force: 110 kN MACHINE DETAILS Dimensions & Weight Space requirement approx.: 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Ijdpfxex Dbp So Ag Ustb Rated power pump motor: 45 kW EQUIPMENT Oscillating elements 2 x 24-way water manifold Material hopper Degassing screw Robot interface 4 x hydraulic core pulls

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 130 mm, displacement volume: 6,172 cm³, injection pressure: 1.296 bar, plate width: 1,700 mm, plate height: 1,704 mm, TECHNICAL DETAILS Clamping force: 6,500 kN Tool opening force, max.: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Clamping plate (h x v): 1,704 x 1,700 mm Clear width (h x v): 930 x 930 mm Tool opening stroke: 1,150 mm Tool installation height, min.: 600 mm Opening width: 1,750 mm Ejector stroke: 250 mm Ejector force forward/backward: 226 kN Injection unit Screw diameter: 130 mm Isdpsx Dbtwjfx Ag Uetb L/D ratio: 20 Injection pressure: 1,296 bar Displacement: 6,172 cc Shot weight (PS): 5,617 g Injection flow: 1,540 cc/s Screw speed: 138 rpm Plasticizing flow: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment Nominal pump motor power: 132 kW Installed heating power: 70 kW Cylinder heating control zones: 7 MACHINE DETAILS Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg EQUIPMENT - Oscillating elements - 1 x air valve - 2 x hydraulic core pull on BFAP - 2 x hydraulic core pull on FFAP - 8 x hot runner control points - Robot interface according to Euromap 67

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Itsdpfx Ajx I Rqcog Ueb

Condition: excellent (used), Year of construction: 2009, operating hours: 63,700 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ARBURG Typ: 270S400-70 Baujahr: 2009 Schließkraft: 40 Tonnen Itsdpsxq R D Ejfx Ag Ueb Holmabstand 270 x 270 mm Schnecken DN: 18 mm Dosiervolumen: 23 ccm³ Spritzteilgewicht 21 g/PS Steuerung: SELGOCIA Ausstattung: -Schnittstelle Roboter -Vertikale Einspritzung Betriebsstunden: ca. 63.700 Hours

Condition: used, Year of construction: 2017, machine/vehicle number: 244489, Machine as new. Very little used, only for sample production. Machine is fully equipped: see dokuments Itedpfxjx H Npus Ag Ueb Machine houers 22039.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, screw diameter: 60 mm, clearance between the columns: 710 mm, displacement volume: 913 cm³, injection weight: 684 g, mold height (min.): 375 mm, input frequency: 50 Hz, input voltage: 400 V, We are offering a Battenfeld HM300/1300 injection moulding machine in very good condition. The machine has been regularly serviced and maintained. Isdjxuz Nmopfx Ag Uetb

Condition: refurbished (used), operating hours: 35,498 h, functionality: fully functional, DEMAG D325 – 1590 NC III Year of manufacture: 1991 Control system: NCIII Screw diameter: 70 mm Injection volume: 960 cm³ / 860 g (70 mm) Clamping force: 3250 kN Tie-bar spacing: 630 mm x 630 mm Minimum mould height: 330 mm – 770 mm Mould opening stroke: 600 mm Ejector stroke: 200 mm Core pull: 2 circuits Pneumatic valve: 1x Robot interface Equipment: Core pull, 2-circuit / Robot interface, 2-circuit Pneumatic valve 5/2 No.1 on moving platen Pneumatic valve 5/2 No.2 on moving platen Clamping force controlled Handling interface, Euromap 12 (32-pin) robot interface Mould protection interface (ejector plate safety) Integrated hot runner control, 12 zones Mould protection Plug combination for electrical connection Isdpfxjx Hg R Ae Ag Ujtb

Condition: used, Year of construction: 2009, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Iodjx H Tgdjpfx Ag Uotb Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts.

Condition: used, Year of construction: 2004, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thread finish, an 8-cavity configuration, and a clockwise work direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Iedpfxox H Tf Te Ag Uetb Manufacturing year: 2004 Configuration: Rotary Maximum speed: 13,000 bph Container material: PET Current bottle format: 0.5L No. of cavities: 8 Thread/neck finish: Alaska Max container height: 350 mm No. of grippers (inlet–outlet): 6 No. of mandrels: 180 Work direction: Clockwise Working plane height: 1470 mm Electrical supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation & Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and fast diagnostics. The control architecture supports stable preform heating profiles, accurate blowing cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the guarding and access points to support consistent production with minimized downtime. Production Line Integration Capabilities This blow molding machine can operate as a standalone unit or integrate seamlessly into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Format changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks across beverage production. Machine Condition & Maintenance History The machine is available in multiple supply configurations: as-is, refurbished and guaranteed, or ready for operation with compatible spare parts.

Condition: excellent (used), Year of construction: 2013, operating hours: 200 h, functionality: fully functional, screw diameter: 65 mm, overall weight: 9,000 kg, clamping force: 785 kN, total width: 1,800 mm, total length: 4,500 mm, total height: 3,000 mm, power: 0.045 kW (0.06 HP), We offer for sale a slightly used injection blow moulding machine in excellent condition. It is connected and fully operational for demonstration purposes. We can also offer several ready-made molds for canisters and lamp shades. The machine is designed for use with PMMA, PC, PP, and PE resins. Itsdsthk Rzepfx Ag Uob

Condition: used, Year of construction: 2007, Serial no. 61004286, Control system by Krauss Maffei, type MC4, 2 injection units, rotary table, clamping force 200 t, tie bar clearance 630 x 560 mm, screw diameter 25/18 mm, max. shot weight 47/20.8 g, 2 material loaders by Piovan Itsdpfxjxug R Nj Ag Ueb +++ Attention: This machine is part of an online auction! +++

Condition: good (used), Year of construction: 2004, operating hours: 29,461 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, injection weight: 140 g, For sale: a well-maintained Arburg 570C-2000-350 2K injection moulding machine from 2004, with only approximately 30,000 operating hours. The machine is in good technical condition and is immediately ready for production. Itjdpfx Aoxyyxqsg Ueb Specifications: Model: Arburg 570C Clamping force: 2000 kN Screw diameter: 35 mm (350) Year of manufacture: 2004 Operating hours: approx. 30,000 Control system: Arburg Selogica Configuration: Standard injection moulding setup, reliable and versatile Condition & Maintenance Machine always serviced as per schedule No significant fault history Clean and fully functioning hydraulic and electrical system Extras (optional) Other screw sizes available.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Itedpfxjh Dr E Tj Ag Ueb Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: excellent (used), Year of construction: 2011, operating hours: 51,000 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-2000CX Isdpfx Aexyrc Isg Ujtb Baujahr: 2011 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 769 cm³ Spritzteilgewicht: 692 g/PS Steuerung: MC6 Ausstattung: 3 St. Kernzug Schnittstelle Roboter 45- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 51.000 Betriebsstunden

Condition: excellent (used), Year of construction: 2011, operating hours: 76,000 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900C2 Baujahr: 2005 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 754 cm³ Spritzteilgewicht: 679 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Schnittstelle Roboter Werkzeuginnendruckmessung Iodpfxexyq S Us Ag Uetb 24- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 76.000 Betriebsstunden

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Arburg Allrounder Selecta 630S - 2500 – 1300 ECO Year of manufacture: 2006 Control system: Selogica with symbol display VE-605/04 TFT flat screen color display VE-605/02 Screw diameter: 60mm Injection volume: 664ccm / 607g Clamping force: 2500kN Tie bar spacing: 630mm x 630mm Minimum mould installation height: 300mm Distance between platens: 900mm–1300mm Mould opening stroke: 600mm Ejector stroke: 225mm Core pull control: 2 circuits Plug ejector plate safeguarding Equipment: Itedpfxsx Dzkpj Ag Ueb - 2-circuit core pull, serial, parallel to tool movement - Ejector with quick-release coupling - Ejector plate safeguarding - Clamping force control - Control extension for special signals, accessible at circuit board (e.g. for pneumatic valve 5/2 valve) - Inputs and outputs freely programmable (4 in / 4 out) - Interface for handling, Euromap 67 (50-pin) - Interface for mould protection (ejector plate safeguarding) - Interface for temperature control unit, connection for up to 6 devices - Interface for coloring / dosing unit - Interface for GIT system - Hot runner control, 6 zones, max. 2 KW/230V per zone - Mould protection - Equipment package No. 1: Advanced monitoring of tool and machine sequence - Equipment package No. 2: Extended movement, increased number of movement steps - Equipment package No. 3: Production control with setpoint temperature detection, automatic on/off - Equipment package No. 5: Optimization of operator assistance - Equipment package No. 6: Quality assurance with process analysis, error evaluation, automatic reference - Equipment package No. 7: Documentation with actual value log via printer interface - Plug combination for electrical connections - Printer interface, serial V24 Technology level 2 – servo-controlled Hydraulic system with 2 variable displacement pumps. The second pump is servo-controlled Without robot and peripheral devices.

Condition: excellent (used), -Model: Regamat R92 -Manufacturer: Winkler -Serial No.: 52217 -5-row dough molding machine Ndey Tdxujwydabsgja -Ready for weighing: 35–85g Itjdpfxewydabo Ag Usb -Voltage: 400V -Power: 2.8kW -Year: 2000

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony Itjdpfx Ageh Dp R Es Uob The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: ready for operation (used), Year of construction: 1998, Stock-No. 13610 Manufacturer Krauss Maffei Type of machine KM 110 – 390 C2 Year 1998 Working hours h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 1100 kN Mould opening force, max. 70 kN Travel force movable platen opening 35 kN Travel force movable platen closing 28 kN Size of mould platens (h x v) 745 x 770 mm Distance between tie bars (h x v) 470 x 470 mm Mould opening stroke 600 mm Mould height min 300 mm Max. daylight 900 mm Hydraulic ejector - stroke 150 mm Ejector force 22/10 kN Injection unit: Screw diameter 35 mm Ls/D ratio 23 Injection pressure 2429 bar Stroke volume 156 ccm Shot weight (PS) 142 gr. Injection rate 123 ccm/s Screw speed 391 1/min Plasticising rate max. 22 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 18,5 kW Installed heating capacity 12 kW Adjustable barrel heating zones 5 Reservoir capacity 345 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 1,60 x 2,00 m Total machine weight 6000 kg Max. mould weight 1485 kg Accessories: - Anti vibration pads - 6 x Water flow Itedpfsub S Ulox Ag Uob Additional Options: - 2 x air valve - 2 x core pull - Robot interface according to Euromap 12 - Electrical screw drive - Accumulator

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Isdjx Nhqiepfx Ag Uotb Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Iodpfxsx Nhp Sj Ag Uotb Operating hours: approx. 30.000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Itodpfox Nhp Eox Ag Ujb Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request