Used Mk5 for sale (195)

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Cjdpfx Apergahxs Djhd

Condition: refurbished (used), Year of construction: 2026, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Chodpjv Hqlrofx Ap Dsd Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Chedpfeua E Txsx Ap Dsd

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Cjdpeurw Uyofx Ap Dehd Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: new, Drilling capacity in steel ----- 50 mm Motor ----- 4 kW Speed range ----- 25 ~ 2000 rpm Spindle stroke ----- 315 mm Overhang ----- 350 ~ 1600 mm Spindle taper ----- MK5 Spindle feed ----- 0.04 ~ 3.2 mm/rev Cube table ----- 630 x 500 x 500 mm Column diameter ----- 350 mm Base ----- 2400 x 1000 x 200 mm Maximum distance spindle - base ----- 350 ~ 1220 mm Chodpfx Apsga Ty No Dsd Weight ----- 3500 kg INCLUDED * Hydraulic clamping system! * Cooling system * CE plug * SCHNEIDER electrical components

Condition: good (used), Tool holder, milling holder, milling tool, adapter -Milling fixtures: Adapter SK50 - MK5 -Intake: SK50 -Tool holder: MK5 Csdpfoi I Hcxex Ap Djhd -Dimension: Ø 100 x 340 mm -Weight: 8.6 kg

Condition: used, Tool holder, milling holder, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves Cjdpjuhr Rgjfx Ap Dohd -Milling holders: MK5 holder -Type: Ø32 x 22 mm -Dimensions: 200/60/60 mm -Weight: 2.1 kg

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 PRICE GREINER STACKING: € 6.500.- / LOT SWITZERLAND Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp Codpfx Aeq Nn Hcsp Dehd The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: used, Technical details: turning diameter over bed: 560 mm Chjdpowa I Shsfx Ap Dsd turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left *

Condition: excellent (used), Attachment holders, standard holders and accessories, spiral drill bits, BILZ spiral drill bits, reaming bits, BILZ reamers, BILZ holders, tool holders, drill bit mounts, twist drills Cjdpfxoyrgwxo Ap Dehd -Mounted tool holder: 8 pieces -Recordings: MK5, MK4, MK3 -Spiral drill bits: 35 pieces -Sizes: Ø38 mm - Ø95 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 550/300/H70 mm -Weight: 28 kg

Year of construction: 2000, condition: used, turning diameter 530 mm turning length 1500 mm Csdpfx Apeiu A Dae Dshd control Fagor centre height 260 mm swing diameter 475 mm swing diameter over flat guideway 530 mm swing diameter over bed slide 315 mm bed width 350 mm spindle bore 80 mm spindle taper innen MK5 turning speeds 2 turning speed range 0-650/650-2500 U/min feed range 0 - 7000 mm/min rapid traverse 10 m/min diameter of quill 72 mm quill travel 180 mm weight of the machine ca. ca. 3,5 t dimensions of the machine ca. L/B/H 3,50x1,50x180 m

Condition: good (used), live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bokö, live centering tip -Type: 2005 Chsdefr Iwyjpfx Ap Ded -Recording: MK5 -Dimensions: Ø 85 x 252 mm -Weight: 4 kg

Condition: used, Year of construction: 1979, taper MK MK5 round table ja weight of the machine ca. 1.200 kg +++++ Please note: Csdpfxjf Ek Rij Ap Dehd The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, grinding diameter 250 mm grinding length 1000 mm centre height 125 mm grinding wheel diameter 500 mm grinding wheel width 80 (100) mm bore 203,2 mm MK5 work piece spindle speed 20-400 U/min workpiece spindle swivable +/- 360 ° grinding head swivellable +/- 0 ° 0-9,99 mm/Ø 0-9,99 mm/Ø table swivelabel +/- 10 ° table speeds 0,02-6 m/min 130 kg max. workpiece weight -without tailstock 130 inkl. Spannung kg cross travel 270 mm tailstock quill taper MT 3 quill travel 30 mm total power requirement 5,5-7,5 kW weight of the machine ca. 2,7 t delivery: completely overhauled including a new control Chsdpjd Ih Egjfx Ap Djd Examples: Accessoies: - Marposs auto-sizing-attachement - Balancing for the wheel. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: good (used), Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket -Milling tool holders: 10 pieces MK5 mounting boring heads/reducing sleeves/spindle tools/mounting holders -Sizes: see pictures -Price/Sale: complete Chjdjf Sgwkspfx Ap Dod -Overall dimensions: 670/470/H80 mm -Total weight: 41.7 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone Csdpsfr Iw Dofx Ap Dohd -Manufacturer: WMW ABW, rotating center point -Type: ZN 205 -Recording: MK5 -Number: 9x centering tip available -Price per piece -Dimensions: Ø 92 x 270 mm / Ø 92 x 270 mm -Weight: 4.7 kg /pc.

Condition: good (used), Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set Chjdpfx Apohnffho Djd -Machine reamer: Reamer with holder -Diameter: Ø 59 mm -Holder: DIN 219 MK5 -Total dimensions: Ø 59 x 442 mm -Weight: 5.6kg

Condition: good (used), live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: WMW, live centering tip, 2 pieces Chjdeg Ualajpfx Ap Djd -Type: ZN 205 -Recording: MK5 -Price/Sale: complete -Overall dimensions: 270/190/100 mm -Weight: 10 kg

Condition: new, Year of construction: 2026, CORMAK Z5050 Floor Drill Press – Heavy-Duty Industrial Metal Drilling Machine The CORMAK Z5050 floor drill press is a robust and precise industrial metal drilling machine designed for professional applications requiring high performance, accuracy, and reliability. Thanks to its wide speed range, tapping capability, and four-stage automatic spindle feed, the machine is ideal for drilling large-diameter holes in structural materials. Its solid construction and optimized ergonomics make the CORMAK Z5050 an excellent investment for long-term productivity and safe operation. Main Advantages of the Machine High machining capacity – maximum drilling diameter of 50 mm and tapping capacity up to M22 in steel provide a wide range of applications. Drilling machine with tapping function – right/left spindle rotation and four spindle feed rates (0.1–0.4 mm/rev) ensure precise and stable thread machining. Automatic spindle feed – enables efficient drilling operations without continuous manual operator intervention. Very wide speed range – 18 spindle speeds from 55 to 1450 rpm allow precise adjustment of parameters according to the processed material. Rotary worktable – ±45° tilting range and a large 580 × 580 mm surface allow angled drilling without removing the workpiece. Cooling system and work light – provide comfort, accuracy, and reliable operation even during extended machining processes. Design and Technology The CORMAK Z5050 column drill press has been designed for maximum stability and high torque performance. The spindle is mounted in a Morse taper MK5 and features a large 210 mm quill travel, enabling deep drilling and tapping operations. The 190 mm diameter column and rigid cast iron base effectively reduce vibrations and ensure precise machining. A clear control layout, readable feed indicator, and intuitive speed adjustment system make machine operation quick, safe, and convenient. Precision and Working Efficiency Cjdpsridynjfx Ap Dshd Thanks to its optimized gear transmission system and powerful 2.2 / 3 kW motor (960 / 1440 rpm), the CORMAK Z5050 metal drilling machine provides efficient torque transfer to the spindle, allowing drilling in demanding and high-strength steel grades. The integrated cooling system with a dedicated 75 W pump helps maintain high surface quality, reduces tool wear, and extends the service life of cutting tools. Standard Equipment Drill chuck 1–13 mm Morse reduction sleeves – 3 pcs. (for MK5) Cooling system with pump Work light Technical Specifications Parameter Value Maximum drilling diameter 50 mm Tapping capacity (steel / cast iron) M22 / M24 Spindle taper MK5 Spindle travel 210 mm Number of speeds 18 Spindle speed range 55–1450 rpm Number of spindle feed stages 4 Feed rates 0.1 / 0.2 / 0.3 / 0.4 mm/rev Column diameter 190 mm Spindle-to-column distance 370 mm Spindle-to-table distance 80–800 mm Spindle-to-base distance 1325 mm Table tilt angle ±45° Worktable dimensions 580 × 580 mm Base dimensions 860 × 580 mm T-slot width 2 × 18 mm Main motor power 2.2 / 3 kW Motor speed 960 / 1440 rpm Coolant pump power 75 W Overall dimensions 1050 × 590 × 2150 mm Net / gross weight 760 / 860 kg

Condition: used, Quick-change tool holder, tool holder head, quick-change tool holder, quick-change drilling tool holder, quick-change boring bar holder, quick-change turning tool holder -Quick-change boring bar holder: clamping diameter 44 mm -Recording dimensions: see photos -Dimensions: 144/72/H155mm Chedsqbycmepfx Ap Dod -Weight: 2.9 kg

Condition: used, live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Sandvik Costa, rotating centering point, centering cone flattened Csdpsu I Hqwofx Ap Dohd -Recording: MK5 -Model: A-5-65085 -Dimensions: Ø 110 x 275 mm -Weight: 6.4 kg

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 87350 € 1650.92 € 540 mm 1500 mm 85 mm 310 mm 350 mm D1-8 1/20 MK 3 27 - 2250 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13,5 (S1 / S6 40%) kW 0.02 mm 0.016 mm ISO3655 3340 mm 1905 mm 2235 mm 3400 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software Chjdpezbvabefx Ap Dod Large spindle bore, with precision bearings for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis. 2-axis AC servo motors 50-300 mm roller-type tailstock. Manual tailstock quill, diameter 75 mm (MK5), travel 190 mm. Programming and operating instructions. Electronic handwheel for X and Z axes Manual 4-station tool holder (25 x 25 mm) Automatic lubrication system Fully enclosed splash guard with sliding door and window Chip container with coolant tank Inspection report LED work light Coolant system Preparation for oil cooling system OPTIONS (PRICES ON REQUEST): Fagor control system instead of Siemens Manual or hydraulic chuck 8-station turret (VDI, slot type o BMT version), optionally with driven tools Electrically rotatable 4-station tool holder Chip conveyor High-pressure coolant pump Further options on request ALTERNATIVE: FCL-2140 variant with 1000 mm centre distance FCL-2180 variant with 2000 mm centre distance

Condition: excellent (used), 1 set of reducing sleeves MK 5 to MK 4-3-2 (28538) Chsdoud Sliopfx Ap Djd Collection free of charge

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder Chsdpfx Asd Ar U Esp Ded -Accessories for: tool grinding machine -Recording: MK5 -Tip height: 145 mm -Part head: swiveling -Dimensions: 250/230/H300 mm -Weight: 23 kg

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 610 mm turning dia. over face-slide: 350 mm swing diameter over bed: 610 mm centre distance: 1390 mm control: Fanuc 0i-Mate TC x-axis: plan: ca. 305 mm z-axis: längs: ca. 1350 mm revolution per minute: 22 - 2200 U/min Csdpfou Ix I Uex Ap Dshd feed:: X + Z-Achse: 5 / 10 m/min. spindle bore: Ø 70 mm tool turret - number of stations: 6 tailstock quill taper MT: MK5 tailstock quill stroke: 150 mm Weight approx.: 2,7 t total power requirement: 15 kW dimension machine xH: 3,7 x 1,7 x 1,7 m dimensions of hydaulic: 630 x 460 x 900 mm other features: -hydr. chuck TONFAU Ø 300mm -hydraulics -Coolant system -control panel -double foot switch accessories: -div. mold jaws -div. soft jaws -6 footrests *