Used Mk5 for sale (195)

Condition: used, Year of construction: 1971, For sale is a TOS WH 80 drilling machine, manufactured in 1971, in working condition. The machine is equipped with a retrofitted digital display and has an MK5 spindle. Equipment / Condition: * TOS WH 80 * Year of manufacture: 1971 * Functional * Retrofitted digital display * MK5 spindle * Large clamping table with T-slots * A large amount of additional equipment and accessories is available * Maintenance / Repairs: Chjdpfszwv Dkjx Ap Dod In 2024, the gearbox was opened and overhauled. Various gears were renewed or replaced during this process. The machine can be inspected on-site and, by arrangement, demonstrated. Due to its size and weight, the buyer is responsible for organizing the collection or transport. Further photos and information on the available additional equipment are available upon request. VAT can be shown separately.

Condition: good (used), WMW HECKERT BR 40/2 x 1250 radial drilling machine - Arm length: 1250mm - Maximum drilling diameter: 40mm - Morse taper: MK5 - Minimum speed: 20 RPM - Maximum speed: 1200 RPM - 3-speed gearbox with variable speed control - Dimensions of drilling head: (L x W x H) 710 x 710 x 500mm Chsdpfxjzury Nj Ap Ded - Weight: 3000KG - Automatic feed - Dimensions (L x W x H): 2100 x 1000 x 2900mm

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Codpfownx Uijx Ap Dohd Weight: Approximately 2,500 kg

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Codpfoxddwrsx Ap Dehd Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: excellent (used), functionality: fully functional, KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 1000 U YEAR OF MANUFACTURE: 2000 PARTIAL OVERHAUL: 2026 Center height: 175 mm Grinding length: 1000 mm Equipment: - Standard accessories - Workpiece spindle stock, standard MK5 with adapter flange DIN 55027, size 5 - Splash guard for the above - Tailstock with micro-adjustment, MK4 - Internal grinding device with protective cover for the grinding spindle D: 80 mm for belt-driven spindles - FISCHER internal grinding spindle, type HJN 842 including grinding mandrels (4 pieces, customer's choice) - Chuck HJNZ 42 - Oil mist lubrication system for HJN spindles - STREULI magnetic paper band filter system, type: SPB 2 - Coolant supply through the workpiece spindle - HEIDENHAIN digital length measuring system in X and Z axes - Sinus scale on the workpiece spindle stock including alignment mandrel MK5 - Permanent magnet chuck, D: 200 mm Codpfxjyf E Sus Ap Dshd - Three-jaw chuck, D: 160 mm - Four-jaw chuck, D: 160 mm - Collet chuck system for Schaublin collets B32 - Set of collets B32, D: 1.0-30.0 mm, graduation 0.5 mm (59 pieces) - Indicator stop for table swiveling with 1/100 mm indicator - Table fixed stop - Truing stop for internal grinding - LED machine light - Various grinding wheel flanges, left (2 pieces) - Pneumatic upper slide relief - Swiveling truing device for truing during external, surface, or internal grinding - Set of vibration-damping pads - New three-color paint finish (light gray RAL 7035 / blue RAL 5012 / dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - Documentation - CE conformity

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder -Mounting bracket: Mount: MK5 4 pieces -Type: Cone Ø 40/37 mm 2 pieces / Ø 32/29 mm / Ø 27/25 mm -Price/Fee: complete -Transport dimensions: 420/230/H65 mm Csdoz Aqvrepfx Ap Dshd -Weight: 15 kg

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 6,000 rpm, total height: 1,700 mm, overall weight: 5,000 kg, number of axes: 2, This 2-Axis lathe was manufactured in 2015. Featuring a Fanuc 0i-Mate TD control, it offers a speed range of 50-6000 min-1 and rapid traverse speeds up to 30000 mm/min. Equipped with a hydraulic 3-B chuck and hydraulic tailstock MK5, it ensures efficient operations. Weighing 5000 kg and with dimensions of 3300 x 1700 x 1700 mm, it’s robust yet space-efficient. Consider the Knuth Starship 400 for precise turning operations. Contact us for further information. Machine Benefits Technical Machine Benefits • Spindle holder iso a2-6 • Centre distance 550mm • Hydraulic tailstock mk5 • Hydraulic 3-b chuck • Rapid traverse speeds up to 30000 mm/min • Max. Turning diameter over bed 360mm Extra Information If required, a minimum quantity lubrication system can be included. The machine can be retrofitted with a C-axis and driven tools. Codezvu N Aopfx Ap Dehd Dimensions Machine Depth 1700 mm

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 4330, spindle bore: 63 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 2,500 rpm, total length: 2,800 mm, total width: 1,800 mm, total height: 1,400 mm, type of input current: AC, spindle motor power: 16 W, overall weight: 3,600 kg, distance between centers: 1,000 mm, Manufacturer SEIGER Präzisions-Maschinenbau Type SLZ 570 E Year of manufacture 2004 Serial No. 4330 Cycle turning machine / CNC high-performance turning machine with Siemens SINUMERIK control. Description including scope of supply and condition report Used cycle turning machine for chuck and shaft machining. The machine features a controlled main drive, servo-driven feed axes, and a Siemens SINUMERIK control with cycle turning function. The machine comes from industrial use and is in well-maintained, used condition. Age-related and usage-related signs of wear are present. Scope of supply according to existing equipment: • 3-jaw chuck Ø 250 mm • Quick-change tool holder with tool holders • Coolant system • Machine light • Fixed and traveling center MK5 • Fixed steady rest (12–150 mm) • Traveling steady rest (12–125 mm) Chjdpezwf Avsfx Ap Ded • Various tool holders and accessories • Documentation, as available Technical data • Distance between centers: 1,000 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Bed width: 350 mm • Tool holder: 25 x 25 mm • Spindle bore: 63 mm • Main drive: 12 / 16 kW • Speed range: 1–2,500 rpm • Max. torque: approx. 1,600 Nm • Servo drive for longitudinal and cross axes • Rapid traverse: 10 / 7 m/min • Tailstock MK5, quill stroke 160 mm • Siemens SINUMERIK control with color monitor • Operating voltage: 400 V / 50 Hz Shipping dimensions length, width, height (mm) approx. 2,800 x 1,800 x 1,400 mm Shipping weight kg approx. 3,600 kg

Condition: good (used), Year of construction: 2015, operating hours: 20 h, functionality: fully functional, Indexing hand device for grinding and milling machines as well as other applications. Robust cast body on swivel angle and base plate. Interchangeable T-slot nuts 10 mm. Comes with reduction sleeves MK6 - MK5 and MK6-SK50, index plate T24. Additional index plates with other divisions used, unit price € 60.00. Used clamping devices – please inquire. Chsdpfx Ajyxyxkop Dod

Condition: used, Year of construction: 1992, Table dimensions 1100 x 880 mm Motor output 7,5 kW Spindle diameter 30 mm reus 3000/4500/6000/9000 U/min Weight 650 kg Year 1992 Used Machine Year of manufacture: 1992 Features and technical specifications: - Universal table milling machine for machining wood, plastic, and light metals. - Interchangeable MK5 milling arbor, secured for left/right rotation Chjdozr Rq Iopfx Ap Ded - Special ball bearings for high-speed operation - Special ribbed table with quill and additional dust extraction under the table. - Locking mechanism for tool change in any spindle position - Digital height indicator with 1/10 mm resolution and zero setting (optional) - Maintenance-free and dust-protected bevel gear feed mechanism: 1 revolution = 1 mm, stroke 130 mm - Central lubrication of both bearings and the feed spindle - SFM 101 control panel - Speed displayed visually and automatically - With automatic brake - Extremely fast belt change with automatic speed display - Machine table dimensions: 1,100 × 880 mm - Working height (table): 900 mm - Motor power: 7.5 kW - Speeds (VBG 7 visual display): 3,000 / 4,500 / 6,000 / 9,000 rpm - Max. height adjustment of the milling spindle: 130 mm - Safety interlock for high speeds - Milling spindle taper: MK 5 - Milling spindle, interchangeable: Ø 30 mm - A-weighted sound pressure level at ear level: L(A) 75 dB - Connection diameter: 2x120 mm - Air velocity: 24 m/s - Air flow rate at table: 680 m³/h - Airflow rate at the router fence: 1,060 m³/h - Dimensions: approx. 140 x 100 x 175 cm - Weight: approx. 700 kg

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm Chedjzp Nz Tspfx Ap Djd ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck -Tapping chuck: Quick-change tapping chuck, without collets Cjdpfxoza Tlls Ap Dehd -Recording: MK5 -Bore: Ø 62 mm -Dimensions: Ø140 x 385 mm -Weight: 15.8 kg

Condition: used, Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool, peeling drill, cutting head -Slicing drill: drill head cutting head with coolant device Csdpfx Apjk Hdtmo Djhd -Drill diameter: 70mm -Intake: MK5 -Dimensions: 825/65/70 mm -Weight: 18 kg

Condition: good (used), functionality: fully functional, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, overall weight: 3,300 kg, Monforts KNC5-1500 Lathe in good condition for sale. The machine operates perfectly. Included accessories comprise all documentation, a quick-change toolholder, and a chip conveyor as shown in the photos. Inspection under power is gladly possible. Loading can be arranged by forklift or crane. Working area: Distance between centers: 1,580 mm Swing over bed: 500 mm Swing over cross slide: 290 mm Cross slide travel: 265 mm Top slide travel: 140 mm Bed width: 360 mm Cross slide width: 220 mm Bed slide guide length: 615 mm Turning tool shank size: 32x25 mm Spindle diameter at front bearing: 100 mm Spindle nose as per DIN 55027, Size 8 Bar capacity: 70 mm Spindle taper (metric): 80 Main drive: steplessly variable, three-phase AC motor Drive power (50/100% duty cycle): 15/11 kW Total speed range: 2-2,800 rpm Gear stage I: 2-280 rpm Gear stage II: 7-1,120 rpm Csdpeypbcdjfx Ap Dshd Gear stage III: 28-2,800 rpm Three-phase servo drive with mechanical safety clutch Rapid traverse speed longitudinal/cross: 10/5 m/min Thread cutting range: longitudinal and taper threads, pitch 0.001-500 mm Tailstock: quill diameter 80 mm Quill stroke 160 mm Internal taper MK5 Tool system: Multifix quick-change toolholder, size C Coolant system: pressure/delivery rate 0.4 bar / 10 l/min Machine dimensions (LxWxH): 3,330 x 1,550 x 1,790 mm Weight (transport unit): approx. 3,300 kg Bed: – Torsion-resistant bed, guideways hardened and ground Gearbox: 3-stage with limit switch monitoring Spindle: – Front spindle bearing: double-row cylindrical roller bearing with tapered bore combined with double-row angular contact bearing – Electric holding brake in main drive motor – Full-length cross slide with adjustable gib Longitudinal and cross feed driven by variable-speed three-phase AC motor via precision ball screw Feed and rapid traverse operated via cross selector lever Longitudinal and cross movements via electronic handwheels Increment selector switch in combination with electronic handwheel Additional contour handwheel Automatic central lubrication for guideways and ball screws Clampable top slide – Quick-change toolholder – Bedway clamping by excenter lever – Additional clamping via tension bolts for heavy workpieces – Quill adjustment by handwheel – Quill tip holder MK5 Connection voltage: 3 x 400 Volt +/-10%, 50 Hz for TN-S or TN-C networks without RCD Total connected load: 16 kVA Transistor-controlled three-phase main drive with speed monitoring If you have any questions, please feel free to contact us at any time.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, MEKITurn KT660 x 1500 - conventional lathe with FAGOR iT30 measuring system. Precise conventional turning and solid machine construction. Demonstration machine, year of manufacture 2024, approximately 50 operating hours, and immediately available. TECHNICAL DATA Swing over bed: 660 mm Swing over cross slide: approx. 430 to 440 mm Swing over compound slide: approx. 820 to 845 mm Distance between centers: 1540 mm Center height: 330 mm Bed width: 400 mm Spindle bore: 105 mm Spindle nose: D1-11 Spindle speed: 15 to 1200 rpm Number of speed steps: 12 Chedpfx Aez E H Nqjp Ded Main motor: 11 kW Tailstock quill: diameter 75 mm Quill travel: 160 mm Tailstock arbor: MK5 Machine weight: approx. 2580 kg EQUIPMENT FAGOR iT30 measuring system Cooling system Tailstock Steady rest 315 mm scroll chuck Safety devices German CE declaration of conformity, issued by the German importer PRICE AND LOCATION Special price on request, ex works 66706 Perl-Besch, Germany. Seller: 3M-Consulting SARL. Delivery, installation and commissioning at the customer's site possible for an additional charge. WARRANTY For Germany and Luxembourg: 6 months warranty from handover, including materials and labor. Travel costs are not included. Outside Germany and Luxembourg: 6 months warranty on materials from delivery. Labor and travel costs are not included. Technical specifications according to the present and confirmed data sheet.

Condition: good (used), Storage location: 3143 Manufacturer: Jakob Schmid Oberkochen Year of manufacture: 1993 Type: RS 1000 Machine number: 1093 1165 Longitudinal travel of the worktable: 200 mm Transverse travel of the worktable: 180 mm Swivel range of the motor: 350° Chedpfx Apez E U Ars Dsd Vertical adjustment: 350 mm Grinding wheel arbor with centering cone: 10 / 20 mm Grinding wheel speed: 6,000 rpm Arbor with dividing head: SK 30 Swivel range of the dividing head: 360° Grinding wheel diameter: 80 mm Connection power: 0.2 kW Condition: good Accessories/equipment: 6-jaw chuck, Additional attachment, MK5 arbor Dimensions with table: 600 x 800 x 1,500 mm Weight of the machine with table: 150 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Röhm / unknown, rotating centering points 3 pieces Chedpswvgqhefx Ap Dsd -Type: Röhm 110HVL MK5 / 2x without type designation -Recording: MK5 -Price/Delivery: complete -Transport dimensions: 280/270/H95 mm -Total weight: 14.3 kg

Condition: used, mileage: 35,140 km, power: 85 kW (115.57 HP), first registration: 02/2022, fuel type: electric, overall weight: 3,200 kg, wheelbase: 3,200 mm, fuel: electricity, color: white, driver cabin: other, gearing type: automatic, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), navigation system, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, XZ1 model generation 1, J2A acoustic ambient protection, EY2 live traffic information, FR8 rear-view camera, H16 driver's seat heating, W65 tailgate, E07 hill-start assist, LA2 headlight assistant, EZ8 Parktronic, JF1 rain sensor, F64 electrically folding exterior mirrors, F68 heated and electrically adjustable exterior mirrors, SA6 passenger airbag, E1D digital radio (DAB), S23 passenger seat - single seat, SB1 comfort driver's seat, VV9 mounting points in the roof frame, D51 continuous partition with 1 window, MK5 speed limiter, 80 km/h, IL5 left-hand drive, RG7 tires 225/55 R17, RM1 M+S tires, F66 lockable glove compartment, H20 heat-insulating glass all around, LE1 adaptive brake light, C70 pedestrian protection, EY5 Mercedes-Benz emergency call system, EL8 2-way front speakers, EA4 Audio 40, CF0 basic chassis, IB6 model series C447 Vito/V-Class, BB6 brake booster failure compensation, BB7 CO2-optimized brake system, EW6 digital extra: Remote Services Plus, ME0 electric motor 85 kW, XA5 weight variant 3,200 kg, J55 seatbelt warning system for passenger, HH9 semi-automatic climate control system TEMPMATIC, FR1 rear camera, not foldable, V43 wooden floor, E2T HV battery 35 kWh, VA2 interior lining of the cargo area up to roof height (wood), ZM0 panel van, HI1 climate zone 1 (cold/comfort), LC4 comfort roof control unit, FZ8 comfort opening and closing with IR remote control, JH3 communication module (LTE) for digital services, IK0 complete vehicle, JX0 short-distance operation, E9L charging cable Mode 3 (Type 2, 3x32A) 8m, VV2 load securing rail system, LC2 LED light strip in the cargo area, CL1 steering wheel adjustable in inclination and height, XO9 Mercedes-Benz MobiloVan with DSB and GgD, XM0 model update, FY7 multi-button remote control, EY6 breakdown management, Z3R premium tire protection (3 years), IN2 wheelbase 3200 mm, long overhang, IL4 region EU/EFTA, XU1 signs / printed matter German, RS7 steel wheels 6.5 J x 17, IG4 standard, JI6 initial mileage maintenance interval 40,000 km, XM8 control code development, WM0 control code model update, VF4 fabric Caluma black, CU1 underbody paneling, aerodynamic, ZC5 sales code 0, ED4 fleece battery 12 V 92 Ah, EW8 pre-installation for Remote and Navigation Services, JE1 maintenance package, J1W maintenance interval 1 year. Csdpfxszp Hvbe Ap Dohd Note: Despite careful checking of all our price indications, errors still occur. These are sometimes caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. A price indication also cannot be declared as part of the contract. If you attach particular importance to a specific feature of our advertisement, please let us know when concluding the contract. Thank you for your understanding!

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 285 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: FANUC, controller model: 21i-TB, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, number of axes: 3, This 3-axis STUDER S33 CNC cylindrical grinding machine was manufactured in 2005 and completely overhauled in 2026, with 0 operating hours post-overhaul. It features a center height of 175 mm and a center distance of 1000 mm. The machine is equipped with a powerful 7.5 kW motor spindle and a control system with a 10.4" color touch screen. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details. - completely overhauled in 2026- Operating Hours: 0h after overhaul- Center Height: 175 mm- Center Distance: 1000 mm- Machine Base: Mineral cast Granitan S103- Strokes: 285 mm (X-axis) x 1150 mm (Z-axis)- X-axis Drive: AC Servomotor and ball screw, 0° angle, feed rate 0.001–5.000 mm/min- Z-axis Drive: AC Servomotor and ball screw, feed rate 0.001–10.000 mm/min- Measuring System: Incremental scale for X and Z axes, resolution 0.0001 mm- Grinding Headstock: Universal for external and internal grinding, Hirth serration 1° (-15° to +195°)- Motor Spindle (Pos. 2): 7.5 kW, 1400 to 3200 rpm, programmable cutting speed max. 50 m/s- External Grinding Guard: Wheel size D. 500x63mm F1 (80mm F5) with automatic contact protection- Internal Grinding Spindle (Pos. 3): Studer belt-driven internal grinding spindle (180°) with frequency inverter- Workhead Stock: Universal, roller bearing mounted, taper MK5, cylindrical outer nose D. 70mm, spindle bore D. 28mm, manual spindle lock- Workhead Drive: 1.8 kW AC Servomotor, speed range 1–1500 rpm, jog speed 1–50 rpm- Workpiece Weight: Max. 80 kg between centers- Tailstock: Taper MK4, 35 mm stroke, quill diameter 50 mm, hydraulic quill retraction with monitoring, manual fine adjustment +/- 0.04 mm- Pneumatic Lifters: Pneumatic lift-off for easy shifting of workhead and tailstock- Control System: Fanuc 21i-TB with 10.4" color touch screen, integrated PLC, 32KB user memory, 400 program storage slots- Power Supply: 400V +/- 10%, 50 Hz +/- 1Hz, 24V DC control voltage Optional Equipment: - Dittel Sensitron 6 contact detection with magnetic sensor (1 pc)- Movomatic C25 LP active probe- 3 pcs levelling elements- Air conditioning unit for electrical cabinet- Euchner hand-held control unit- Swiveling dresser for internal grinding- Park position for tailstock- 3 pcs Studer belt-driven internal grinding spindles (24,000 rpm / 40,000 rpm / 60,000 rpm)- Foot pedal for C-axis override with open doors- Foot pedal for clamping device actuation (tailstock)- Electrical interface for rotary dressing (spindle optional)- Movomatic in-process gauge control ES 124 control (measuring head optional)- 8 pcs used grinding wheel flanges for external grinding- Various new MK4 centers- Various dressers Additional Capabilities: Chsdpfx Apszwd Hge Ded - Capable of thread and form grinding (software must be requested directly from Fritz Studer AG)

Condition: good (used), Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm -Projection: 380 mm Chedpfx Aer Ngp Ujp Dsd -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg

Condition: used, Year of construction: 2008, Chevalier FLC-2540 CNC Lathe CNC Lathe Chevalier Type/Model FCL-2540 Condition Used Year of Manufacture 2008 Technical Data Capacity Diameter over bed: Ø 630 mm Diameter over cross slide: Ø 400 mm Max. turning diameter: Ø 630 mm Distance between centers: 1,000 mm Spindle Spindle speed: 37 - 2,250 rpm (D1-8), optional 80 - 1,500 rpm / 10 - 800 rpm (A2-11) Spindle nose type: D1 - 8, optional A2 - 11 Spindle taper: 1/16, optional 1/20 Travel distances X-axis: 280 mm Z-axis: 850 mm Cjdpfezx Up Uex Ap Dshd Feed rate: 5,000 mm/min X-axis rapid traverse: 5,000 mm/min Z-axis rapid traverse: 8,000 mm/min X-axis spindle diameter: Ø 25 mm / 5 mm Z-axis spindle diameter: Ø 40 mm / 10 mm Tool turret Manual tool turret: 4-position Max. tool shank size: 25 mm Diameter: Ø 75 mm Tailstock Travel: 190 mm Taper: MK5 Motor Spindle motor: 15.5 kW Feed motor (X/Z): 1.4 kW Dimensions (L x W x H): 2,840 x 1,905 x 2,235 mm Net weight approx.: 3,350 kg Features: - Software: Siemens ShopTurn Accessories - 7 x Multifix C40/170 - 7 x Multifix C32/150 - Chuck Schunk Rota-S 319-92 - Chuck Schunk Rota-S 160-42 - Measuring probe - Steady rest - Drill chuck - Taper adapter for drills - Numerous drills (up to D=35) - Approx. 25 HSS cutting tools Request item: Transport costs will be provided in a separate quotation.

Condition: used, Year of construction: 2010, operating hours: 11,700 h, Machine 1 – SI-G200MK5: equipped with 2 heads, each with 12 nozzles. Machine 2 – SI-F209: equipped with 1 head, intended for the placement of components such as ICs, BGAs, QFPs, etc. Cjdpfxoz Hxxgo Ap Djhd Total operating ca 11,700 hours

Condition: used, Weipert crankshaft grinding machine Weipert Grinding bench Centering spindle: Röhm 110 H MK5 Machine length: 4300 mm Csdpoihfryofx Ap Djhd You can find other grinding machines in various sizes – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 1955, Radial drilling machine, drilling machine, boom drilling machine -Projection: 2055 mm -Max. distance from machine table to spindle mount: 1700 mm -Conical mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm Chjdsd Enr Ispfx Ap Ded -Thread cutting device -Automatic feed: 0.037-2.0 mm/rev -Clamping surface: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve Chedpfx Ajylkunep Dod -Morse taper sleeve: MK4 4 pieces -Type: MK5/4 / MK5/3 / MK5/2 -Price/Fee: complete -Transport dimensions: 180/90/H170 mm -Weight: 8.1 kg