Radial drilling machine

Rogi MRD5016

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min Fgjdjl Tuvdjpfx Akkod -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. Fedpfx Ajt Ucpbjkkjgd The machines are for sale as a single unit and individually. Inquire by phone or email!

Condition: like new (used), Year of construction: 2024, Traverses XYZ: 625 x 450 x 400mm, 500 x 450mm diameter table, max table weight 400kg, maximum workpiece size 550mm dimeter x 450mm high, B axis table tilt +30°, -110°, C axis 360degrees, 18.5kW, 12000rpm, BT40, Fgjdpfeyia T Sjx Akksd 24 pallets 120 station tool changer, Fanuc I series control, swarf conveyor,

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm Fsdpfx Aju N A Easkksgd table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Condition: excellent (used), SK 50 holders (28627) Various manufacturers: Bilz Kelch Sandvik Clarkson Fgedpfowl U Tcsx Akkjd Approx. 90 pieces

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm Fgodovwgq Sepfx Akkjd weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm The machine is supplied with a wide range of accessories

Condition: new, ZEATZ NC rotary tables, PHV series – available for short-term delivery The ZEATZ NC rotary tables of the PHV series stand for the highest precision, stability, and flexibility in modern machining. Ideal for positioning, turning, and simultaneous machining in a wide range of applications. Your advantages at a glance: ✔ Integration into existing machines (HEIDENHAIN / SIEMENS) ✔ Service & technical support directly from JMT ✔ Individual designs and customer-specific solutions ✔ High load capacity for heavy workpieces Why ZEATZ: ZEATZ represents innovative NC rotary table solutions with the highest precision and reliability. Thanks to their robust design, backlash-free drive systems, and state-of-the-art control technology, these rotary tables are ideal for demanding machining processes. Technical features: Working position: Vertical / Horizontal Applications: Precise positioning, stepless rotation, and interpolative machining in a single setup Fjdpfx Aksm Tvz Djkjgd Sizes: Table diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (optional also with square clamping surfaces) Max. workpiece weight: Horizontal: up to 20,000 kg Vertical: up to 4,000 kg Positioning accuracy: ± 3" Integration: Compatible with HEIDENHAIN and SIEMENS controls Your advantages as a JMT customer: ✔ Official distribution partner for ZEATZ in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Support with integration and commissioning ✔ Numerous reference projects available in Germany

Condition: good (used), Year of construction: 2008, functionality: fully functional, Okuma Multus B300-W 6-axis turning and milling center - Okuma OSP P200L - Year 2008 - Cutting time: 10,500 h - H1 milling spindle: 6,000 rpm - Main spindle: 3,800 rpm, Rota NC 315-86 - Counter spindle: 5,000 rpm Fgsdpfeyg Rf Nex Akkod - ATC 60 system HSKA-63 (60 tools) - Geometry: very good - Marpos tool sensor

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Fsdpfx Asur H I Nskkogd Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: new, functionality: fully functional, empty load weight: 945 kg, maximum load weight: 2,555 kg, overall weight: 3,500 kg, axle configuration: 3 axles, permissible axle load (axle 1): 1,500 kg, permissible axle load (axle 2): 1,500 kg, permissible axle load (axle 3): 1,500 kg, loading space length: 3,940 mm, loading space width: 1,800 mm, loading space height: 270 mm, loading space volume: 1.91 m³, total length: 5,750 mm, total width: 2,300 mm, total height: 1,850 mm, tire size: 185/60R12, tire condition: 100 %, color: grey, Year of construction: 2025, operating hours: 1 h, Equipment: jockey wheel, === KEY SPECIFICATIONS === Year: 2025 First registration: 29-10-2025 Machine type: Trailer; machine transporter Gross vehicle weight: 3,500 kg Net payload: 2,555 kg Fjdpjy Iz Niefx Akkegd Empty weight: 945 kg Number of axles: 3 Braked trailer: Yes Loading floor: Aluminium Load bed dimensions: 394 x 180 cm Overall dimensions: 575 x 230 x 185 cm Ramp length: 150 cm Load bed height: 32 cm Upstand height: 27 cm Tyre size: 185;60R12 Automatic jockey wheel: Yes Construction: Hot-dip galvanised steel Country of production: Germany === HIGHLIGHTS === Professional Hulco Terrax machine transporter Triple-axle version with 3,500 kg gross vehicle weight Net payload of 2,555 kg Strong aluminium loading floor 150 cm loading ramp with supergrip profile Low loading height for easy loading and unloading Automatic fold-away jockey wheel Multiple lashing points for safe transport Hot-dip galvanised chassis Suitable for aerial work platforms, scissor lifts, mini excavators, compact loaders and other machinery === CONDITION === New trailer from stock. Good visual condition and ready for use. Inspection possible on request. === LOCATION & PRICE === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). This Hulco Terrax-3 3500 machine transporter is designed for professional transport of machinery and equipment. Thanks to its triple-axle chassis, 3,500 kg gross vehicle weight, 2,555 kg net payload, strong aluminium loading floor and 150 cm loading ramp, this trailer is suitable for transporting aerial work platforms, scissor lifts, mini excavators, compact loaders and other compact machines. The trailer is equipped with an automatic fold-away jockey wheel, hot-dip galvanised chassis and multiple lashing points for safe and secure transport. Reliable trailer from our stock in Sittard, Netherlands. Professional transport and export documentation can be arranged on request. === DELIVERY === Flexible shipping options available depending on destination and logistics requirements. All transport can be professionally handled by the logistics team of Collé Rental & Sales.