Used Mk5 for sale (209)

Condition: used, Year of construction: 2025, Drivetrain Drive: Wheel Weights Empty weight: 60.000 kg Godex Sch Iopfx Ag Robg Functional Lifting capacity: 250.000 kg Identification Serial number: 52509756 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 80000 Transport dimensions (LxWxH): 15.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Tool holder, milling tool holder Gbodpfxsb A Naas Ag Rjg -Recording: SK50 -End milling cutter: MK5 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Weight: 6 kg

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg Godewnx Uiepfx Ag Rebg

Year of construction: 2016, condition: excellent (used), Grove GMK 5250L All Crane Code: CR_66664 Year of manufacture: 2016 1st entry into service: 14.04.2016 Max. Lifting capacity: 250to. Undercarriage Manufacturer: Grove Drive: 10x6x10 Engine: Mercedes Benz OM 471LA HP / KW: 530 / 390 Vmax: 80 km/h Superstructure Manufacturer: Grove Boom: 70 m Tip: 21-42 m N-boom Hoisting winches: 1 LMB: Grove CCS Boom puller for transport without telescopic boom for a total weight of 38.3 to (axle loads max. 9 to). Newly painted 01/2019 in yellow/white. Tyres 16.00R25, 80.1 t. counterweight, camera system, additional oil cooler, HETRONIC radio remote control for all crane functions, hook blocks (125 t. 5-roller, 80 t. 3-roller, 32 t. 1-roller, 12 t. Bommel), MaxBase, 2 working lights on the basic boom, flight warning light. Gsdpfjitu Rfex Ag Rjbg

Condition: used, Side forklift Steinbock Boss Type 556/MK5B-3 for efficient transport and stacking of long goods, pallets and wood materials in tight storage and production areas. The robust construction enables safe handling even with heavy loads. Ideal for sawmills, timber trade and industrial manufacturing. Capacity: 5.000 kg Lifting height: 3.300 mm Load centre of gravity: 600 mm engine: diesel Fork length: 1.200 mm Gjdpfx Asxpvr Eog Rsbg steering: hydraulic operating hours: approx. 2003

Condition: used, mileage: 41,405 km, power: 420 kW (571.04 HP), fuel type: diesel, fuel: diesel, Year of construction: 2009, operating hours: 3,067 h, Engine capacity: 15.930 cc Empty weight: 71.115 kg GVW: 60.000 kg Lift height: 6.000 cm Technical inspection expiration date: 2026 Auction item. Gbsdpfx Aex Ta Stjg Rog The truck crane is in working condition. The crane's lifting height is 60 meters with the main boom and 95 meters with the jib. The crane's lifting capacity is 130,000 tons. Partial technical inspection is valid until 2026-06-05, full technical inspection is valid until 2028-06-05. Sold as seen in the photos and video.

Condition: used, Year of construction: 2025, operating hours: 1 h, Drivetrain Drive: Wheel Gsdpfxexbxpds Ag Rsbg Weights Empty weight: 60.000 kg Functional Lifting capacity: 150.000 kg Identification Serial number: 51508182 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 44500 Transport dimensions (LxWxH): 14.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Year of construction: 2026, condition: new, The machine is suitable for stoning of stone fruit. The chopped fruit can be delivered to a container, a pasteurizer, a jam extractor, suitable for use with a screw pump or collector handle with manual force. - quick sieve change - low upkeep - perfect for mash seed removing Specifications: - Performance: 500-1000 kg/h - Electric demand: 2,2 kW, 400 V, 6 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 650x1100x1140 mm - Weight: 100 kg - IP65 certified electronics - Input height: 1050 mm - Output height: 380 mm - Food industrial rotor rubbers - Adjustable distance between the sieve and rotors - With feed screw in the input hopper. With 2pcs rotating, 2pcs fix wheels, or 4 pcs vibration-free feet. It requires minimal maintenance. Sieves can be changed easily and quickly. One choosable diameter sieve is inclusive in the list price Available options: - DN 65 connection for the outlet - Inverter: speed control for the rotor - Sieves: - 0,8 mm diameter sieve: berries, pulps - 1,5 mm diameter sieve: berries, pulps - 3 mm diameter sieve: apple, pear mash - 5 mm diameter sieve: cherry - 8 mm diameter sieve: plum, apricots Gsdpfxsd Aqy Ro Ag Robg - 10 mm diameter sieve: peach, mango - Custom diameter sieve

Condition: used, mileage: 233,300 km, power: 265 kW (360.30 HP), first registration: 02/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Int. No.: 093 MAN TGS 6x4 with HMK crane * MAN * TGS 26.360 Gbodpfjty Hntox Ag Rsg * 6x4 wheel formula * Automatic * permissible 26,000kg * CRANE HMK 550 Ta2-a2 * Radio control * Main arm 2x hydraulic extension jib + manual extensions * Support * Hook height approx. 40m * See load diagram * Leaf/leaf suspension * Diff. lock * Central locking * 2-seater * AIR CONDITIONING * * Radio * Self-propelled work machine/mobile crane * Green sticker * 1st hand * Inspection book complete * Verifiable!!! Trade-in possible Financing from 4.99% Subject to errors and prior sale! The information in this advert is a non-binding description and does not constitute a guaranteed property. The seller assumes no liability for typing and data transmission errors. The equipment listed must be checked separately. All information in the adverts is non-binding! Delivery throughout Germany on request Opening times: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Year of construction: 2007, condition: ready for operation (used), A 4-head welding machine Rotox for window construction is available. Profile height range: 30mm-125mm, max. profile width: 140mm, min. welding length with/without gasket forming unit: 320mm/430mm, max. welding length without/with gasket forming unit: 4000mm/4000mm, min. welding width without/with gasket forming unit: 430mm/500mm, max. welding width without/with gasket forming unit: 3500mm/3500mm, welding bead limitation: 0.2mm-2mm, material: uPVC hollow bar profiles, weight: approx. 3100kg. Documentation available. On-site inspection possible. Expected to be available from the end of 2026. Gjdpfoxvru Nsx Ag Rjbg

Condition: used, Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator, air damper actuator, gas pressure regulator, electro-hydraulic drive, servo motor, motor valve -Manufacturer: Dungs, engine valve unused OVP -Type: DMK 507 diam. 15 Item No. 222620 -p max.: 500 mbar -Number: 3x valve available -Price: per piece -Dimension box: 120/90/H55 mm -Weight: 0.4 kg/piece Gbodpfxeghiado Ag Rjg

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp Gbjdpfeq Nn Hcex Ag Reg The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: ready for operation (used), Size 400 x 300 mm Equipment Gbodpod Hrmtjfx Ag Rog 4 spindle

Condition: used, Electric motor, three-phase motor -Power: 5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm Gbjdpjcnhbasfx Ag Rog -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 530/370/H280 mm -Weight: 80 kg

Condition: used, Tool holder, milling holder, milling tool Gbjdpfx Ajb A Nw Esg Rog -Adjustment: SK50 -Shell end mill: MK5 -Drill chucks: flat chucks, reducing sleeves, cutter head, shell end mill -Weight: 6 kg

Condition: used, Electric motor, three-phase motor Godpfegfrbqex Ag Robg -Manufacturer: VEM, electric motor type DMK 5/6 RA -Power: 3.5 kW -Speed: 950 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Protection class: P33 -Dimensions: 515/360/H285 mm -Weight: 77 kg

Condition: used, Three-phase motor, electric motor -Power: 3.5 kW -Speed: 950 rpm -Shaft: Ø 28 mm Gbsdpfx Aed Hp T Hjg Rsg -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 485/350/H280 mm -Weight: 42 kg

Condition: good (used), Drill bits, twist drills, drill bits -Spiral drill bit: 250 kg net Gjdpfx Ajx Sdupsg Rjbg -Type: Two-flute end mill, various lengths, diameter approx. Ø10 - Ø50 mm, mounts MK2 MK3 MK4 MK5 -Price/Fee: complete -on request: various sizes/quantities available from further stock -Transport dimensions: 1200/800/H300 mm -Weight: 270 kg

Condition: used, length 108 cm width 92 cm height 150 cm weight 120 kg Gbedpfx Agex R U Iws Reg Hahn & Kolb Tool Holder Rack (WTS) – TR40 / VDI40 / MK5 For sale are 2 identical storage system, sold only together as one item. Designed for safe storage and transport of CNC tools in rack systems or on pallets Details: Manufacturer: Hahn & Kolb WTS modular tool cabinet inserts TR 40 / VDI 40 / MK5 Configuration: - Storage rack 1: 22 holders TR40 / VDI40 / MK5 - Storage rack 2: 23 holders TR40 / VDI40 / MK5 - Dimensions per rack (L×W×H): 920 × 520 × 1500 mm Total weight: approx. 120 kg Overall dimensions (both units together): 1080 × 920 × 1500 mm Condition: used, fully functional. Sold as a complete set only.

Condition: new, Drilling capacity steel ----- 50 mm Motor ----- 4 KW Speed range ----- 25 ~ 2000 r/min Spindle stroke ----- 315 mm Unloading ----- 350 ~ 1600 mm Spindle mounting ----- MK5 Spindle feed ----- 0.04~ 3.2 mm/rev Cube table----- 630 x 500 x 500 mm Gedjga Ty Nopfx Ag Robg Column diameter ----- 350 mm Foot ----- 2400 x 1000 x 200 mm Maximum distance spindle - foot ----- 350 ~ 1220 mm Weight ----- 3500 KG INCLUDED * Hydraulic clamping ! * Cooling system * CE plug * SCHNEIDER electricity

Condition: used, _____ Description: Year of manuf. : 2022 Control : Fanuc 0i-TF Gbedpfx Agjwt Iwqj Rsg Turning diam. : 580 mm Turning length : 3250 mm Mainspindle: Technology:Belt-driven spindle with Gearbox Speed:1.000 rpm Power (max.):45 kW Torque (max.):4.008 Nm Barcapacity:205 mm Workpiececlamping I:3-Jaw chuck, Autogrip AP-230 ø535 mm Workpiececlamping II:Manual 3-Jaw chuck, Chandox SK20 (Rearside Spindlehead) Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:BMT 75 Tooldrive:3.000 rpm, 7 kW, 83 Nm Movement in X/Y/Z:340/160/3.250 mm Rapid travers in X/Y/Z:20/7/12 m/min Tailstock: Technology:Towed tailstock with programmable Sleeve Stroke:150 mm Cone:MK5 Equipment/Accessory: Chipmanagement:Chipconveyor Coolingmanagement:Coolant pump Toolmeasurement:Measuringarm, Renishaw RP3 Oilmistseparation:Mechanical extraction, AR Filtrazioni ARNO 3VF YF Shaftprocessing:Manual Steady rest, ø150-300 mm Toolholder:Misc. static and driven toolholder Setup operations:Electronic Handwheel Further Equipment:Automatic Door (pneumatic), Trafo, Oilskimmer Further Accessory:Misc. Jaws and EWS Quickchangeinserts

Condition: good (used), Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, dividing head/tool holder for tool grinding machine -Type: 36642.M1 -Parting head: rotatable/tiltable Gedpfx Agoxfhche Rebg -Mounting/Dimensions: MK5 see photos -Dimensions: 300/270/H180 mm -Weight: 21.6 kg

Condition: good (used), Universal milling angle head, milling angle head -Recording: MK4 Gedpsc Sc Ikefx Ag Rjbg -Drive mount: MK5 -Angle head: swiveling -Dimensions: 440/300/H310 mm -Weight: 68 kg

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck -Handover in its current condition as inspected -Thread cutting chuck without collets -with slip clutch -Cutting capacity: M24-M64 -Recording: MK5 -Quantity: 1x threading chuck available Gsdpfsc S D H Isx Ag Rsbg -Weight: 13 kg

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 Gsdpfsw E Nkiex Ag Rsbg -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg