Used Mk2 for sale (197)

Condition: excellent (used), For sale: KSB ETABLOC G 40-200/1102 G4 centrifugal pump with an 11 kW electric motor. The pump is used, has been inspected, and is in fully functional condition. It was inspected before being put up for sale. Its visual condition matches the photos – normal signs of use and storage are visible. Pump data: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 40-200/1102 G4 Flow rate Q: 20–60 m³/h Head H: 57–35 m Rotational speed: 2900 rpm No.: 5-118-547 043/1 Motor data: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: ZKA 160 MK2 Power: 11 kW Voltage: 380 V Current: 22 A Rcodpfoz Sn Nyex Akieh Frequency: 50 Hz Rotational speed: 2880 rpm cos φ: 0.9 No.: Ident-No.: 00533537 Motor-No.: 544077 Condition: used – inspected – 100% functional. For sale is the exact unit shown in the photos.

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Rodpfx Ash N Sd Ujkijch Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: used, Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 13 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg Rcedjrv Avvopfx Akioh

Condition: excellent (used), Year of construction: 1991, WEILER L + Z LATHE TYPE: PRIMUS GS MACHINE NO.: 4780 YEAR OF MANUFACTURE: 1991 Center distance: 430 mm Center height: 120 mm Equipment: - RÖHM 3-jaw chuck, Ø 125 mm, including jaws - RÖHM 4-jaw chuck, Ø 125 mm, including jaws - Set of collets, including draw tube, 23 pieces - HEIDENHAIN digital measuring system, transverse for feed - Fixed centering point, MK2 - Rotating centering point, MK2 - Longitudinal stop (2 pieces) - Follower plate, Ø 120 mm - Chuck guard - MULTIFX quick-change system, including 3 toolholders, size A - Various turning tools - Operating tools Rsdpez Hwwzjfx Akiech - Color: green, RAL 6011 - Documentation

Condition: used, Quick-change drill chuck with inserts for holding drilling, reaming, countersinking, and threading tools. Tool holder - quick-change holder - quick-change chuck Type SF 46 MK4 presumably a West German product similar to BILZ / MAYSSO Tool holder: MK4 - only suitable for vertical use (sleeve is locked by its own weight) - suitable for clockwise and counterclockwise rotation Insert sleeve diameter: 46 mm 3 pieces of insert sleeve MK2, length = 105 mm 3 pieces of insert sleeve MK3, length = 109 and 122 mm 3 pieces of insert sleeve MK4, length = 135 mm - Quick-change system for drilling and radial drilling machines as well as CNC drilling machines - various operations can be performed with very quick tool changes in a single workpiece setup - with dual ball clamping system for secure torque transmission and play-free seating of the inserts in the chuck - Not suitable for radial loads, e.g., milling, and tensile loads, e.g., back-countersinking. Weight: 14 kg good condition The inserts can be quickly changed without any auxiliary tools and are automatically locked when inserted into the chuck. Rsdpez It Rmsfx Akisch The inserts are unlocked by axially shifting the switching sleeve. The tool change can be performed with the spindle both stationary and rotating. Short insertion and retraction distances of the inserts allow for tool changes in seconds. The quick-change system can be used vertically for both clockwise and counterclockwise rotation.

Condition: used, Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm Rodpfx Aked Tm Hnjioch -Projection: 255 mm -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg

Condition: new, Year of construction: 2026, ZX7045 B1L milling and drilling machine is a versatile drill-mill designed for precision metal machining in workshop and production environments. The machine combines drilling and milling functions, ensuring stable operation thanks to its heavy cast-iron construction and a wide spindle speed range. It is a solution for facilities that require repeatability, rigidity, and real productivity. Main advantages Heavy, stable cast-iron body – minimizes vibrations during milling and drilling Automatic spindle feed (125 mm) – improves efficiency in batch operations Height adjustment on the support, not the column – greater setup precision Rcodpfsy E Hk Hsx Akish 12 spindle speed ranges up to 3200 rpm – adaptable to material and tooling Equipped with coolant system – stable cutting conditions and extended tool life Dovetail guideways – high rigidity and movement accuracy Tilting head ±90° – enables angled machining Quiet operation thanks to ground gears and capability of both left- and right-hand rotation Construction and technology The ZX7045 B1L drill-mill is designed as a compact yet fully industrial metal milling machine. Its heavy base and cast-iron body ensure high system rigidity. The cross table (1000 × 240 mm) features a precision-ground working surface, allowing accurate workpiece clamping. The MT4 spindle taper enables the use of a wide range of tools, including end mills, face milling heads, and taper shank drills. The 1.8 kW (2.5 HP) motor, powered at 400 V, ensures stable performance even at larger milling diameters. Precision and performance With X/Y/Z travels of 560 / 190 / 430 mm, the machine supports a wide range of operations: drilling up to 32 mm in steel and 45 mm in cast iron, face milling up to 80 mm, and end milling up to 28 mm. Adjustable quill feed rates (0.12; 0.18; 0.25 mm/rev) allow parameters to be tailored to the material and quality requirements. Standard equipment Drill chuck arbor MT4/B18 Drill chuck 3–16 mm / B18 Reduction sleeve MT4/MK3 Reduction sleeve MK3/MK2 Basic tools User manual (Polish) Optional equipment Machine stand Automatic X-axis feed Swivel, tilting, and precision vises Rotary tables and dividing heads Tapping heads and milling heads Tool holders and drive arbors Technical specifications Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 45 mm Face mill diameter: 80 mm End mill diameter: 28 mm Spindle speeds: 95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200 rpm (12 steps) Spindle taper: MT4 Spindle feed: 125 mm (automatic) Table size: 1000 × 240 mm Base dimensions: 440 × 600 mm Max. spindle-to-table distance: 445 mm Spindle-to-column distance: 262.5 mm X/Y/Z travel: 560 / 190 / 430 mm Quill feed rates: 0.12; 0.18; 0.25 mm/rev Head tilt (left/right): 90° Motor power: 1.8 kW (2.5 HP) Power supply: 400 V Weight: 375 kg

Condition: as good as new (ex-display), SHOWROOM MACHINE Rcjdpfx Aotpnawekioh For sale is an as-new Drechselmeister Twister FU 200 woodturning lathe with a center distance of 715 mm. This showroom machine is in its original condition, so you receive the full warranty. Technical specifications: - Center height: 200 mm - Swing over bed: 395 mm (up to 700 mm with optional outboard turning attachment) - Center distance: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed range (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Tailstock quill travel: 100 mm (with trapezoidal thread), prepared for ER-25 drilling quill - Motor: 1.5 kW / 2 HP (230 V connection) - 2-stage brake switch - Weight, bench model: 166 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can handle your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Condition: like new (used), DEMONSTRATION MACHINE For sale: MIDI2 Plus lathe demonstration machine with a center height of 178 mm, including PRO DDMIDI-105 machine stand! The lathe has only been used briefly for demonstration purposes at Hödnerhof. Therefore, it is considered as new and comes with full warranty / guarantee. Technical Specifications: - Center height approx. 178 mm / turning diameter 355 mm - Distance between centers approx. 400 mm (expandable with optional bed extensions) - Speed ranges: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) anti-rotation safety groove* - Tailstock with interchangeable quill, 100 mm MK2, trapezoidal thread and measuring scale! (Optional: Interchangeable quill with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg Rcsdpou Szlzofx Akijh The machine is located in Kuchl, A-5431. Subject to prior sale! (No shipping possible) Related terms: wood lathe, turning machine, lathe, woodturning, wood turning tools, woodturning, machine Reference: DDMIDI2-PLUS-VH

Condition: excellent (used), throat depth: 1,100 mm, nominal power at 50% duty cycle: 96 kVA, short-circuit current: 31,500 A, input voltage: 400 V, type of cooling: water, overall weight: 830 kg, Equipment: type plate available, Spot welding machine, type PMS 11-4 G3, 3-phase DC version - specifically designed for welding aluminum sheets - rarely used, completely inspected and cleaned - fully functional, ready for demonstration - rated voltage 400V/50Hz - rated power 96 kVA - welding current 23 kA - connection cable cross-section 10 sq mm/phase - fuse rating 63A - arm reach 1050 mm (!!) - electrode arm diameter 60 mm - electrode holder diameter 30 mm - electrode force 600 daN - stroke 65+25 mm Rjdpfeh N Sc Ejx Akiech - electrode cone MK2 - control unit MPS 8043/1 from Harms & Wende with current ramp-up and pulse function - with operating manual - 2-stage foot switch according to UVV standards - main machine switch - pneumatic maintenance unit - weight approx. 830 kg - complete documentation with wiring diagram, compressed air circuit diagram, and cooling water circuit - VAT can be shown separately - delivery from warehouse in Dresden approx. 4 days within Germany - export may take longer! On-site commissioning is subject to a charge and will be billed according to the actual effort involved. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment.

Condition: used, Burnishing tool, roller burnishing machine, rolling mandrel, smooth rolling tool, internal rolling tool -Manufacturer: Sartorius, roller burnishing tool holder MK2 -Type: Diameter 55 mm -Dimensions: Ø55 x 270 mm Rsdpfxeua Nlls Akioch -Weight: 1.7 kg

Condition: used, Year of construction: 2006, functionality: fully functional, year of last overhaul: 2022, SCHULER GRÄBENER TMK 2-630 – 630 t Punching and Forming Press with Coil Feeding System Manufacturer: SCHULER / Gräbener Pressensysteme Type: TMK 2-630-3.0-50/210 S Year of Construction: 2006 Press Force: 6,300 kN / 630 t Design: Mechanical Punching and Forming Press / Single-Action Press For sale is a SCHULER GRÄBENER TMK 2-630 mechanical single-action press / punching and forming press with a press force of 6,300 kN, including a complete SCHULER automation strip guiding, straightening, and coil feeding system. The system was used for the mass production of punched and formed parts and is currently still fully assembled on site. Technical Data Press Rated Force: 6,300 kN Rated Stroke: 12 mm Stroke: 50–210 mm Stroke Rate: 15–60 strokes/min Max. Flywheel Speed: 960 1/min Ram Adjustment: 200 mm Max. Installation Height: 800 mm Table / Tooling Area: approx. 3,000 × 1,500 mm Max. Tool Dimensions: 3,000 × 1,500 × 800 mm Max. Tool Weight: 12,000 kg Drive Power: max. 280 kW Rated Current: 420 A Compressed Air: 6 bar Hydraulic System: 400 bar Clutch / Brake: 6 bar Permissible Switching Rate Clutch / Brake: 16/min Machine Weight without Accessories: approx. 138,000 kg Coil and Feeding System SCHULER Automation / Gräbener Pressensysteme, Year of Construction 2006. Coil / Uncoiling Unit: Type AC-LH-160-0650 Strip Width: 40–600 mm Coil Outer Diameter: 900–1,800 mm Spreading Range: 470–530 mm Coil Uptake / Uncoiling Strip Guiding and Straightening System Threading / Strip Guiding Devices Automated Material Feeding Roller Guides Conveying / Removal Technology Complete Protective Enclosure Control / Operation SCHULER System Control Siemens SIMATIC Operating Components Siemens SIMATIC OP17 Touch Panel Separate Operating Panel for the Feeding System Setup Operator Devices Unidor Process / System Monitoring Condition and Maintenance The system was overhauled in 2022 for approximately €85,000. The maintenance history has been regularly recorded. Current maintenance and repair records are also available for 2026. Rcodpfozv Utnjx Akioh The system is fully assembled on site and can be inspected by appointment. Scope of Supply The press system is sold, including the associated SCHULER automation and the existing coil, strip guiding, straightening, feeding, and removal technology, as well as the associated protective enclosure and operating / control devices, according to the existing system scope. Complete Service from a Single Source Upon request, we offer a complete project management service for this system – from financing to installation and commissioning at the new location. Possible Services: Individual financing and leasing solutions Organization and support for disassembly Heavy-load loading and transport International transport and export processing Organization of crane and heavy-load operations Reconstruction and assembly at the new location Support during commissioning Coordination of required service and specialist companies This allows the system to be taken over not only at the current location, but also as a completely organized machine project, depending on the customer's requirements. Location: Germany Availability: by arrangement Inspection: by appointment Disassembly / Transport / Reconstruction: can be completely organized upon request Financing / Leasing: upon request Technical data based on available documents and nameplates, subject to change and prior sale.

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is a nearly new Teknatool Nova Neptune 190 DVR woodturning lathe with a centre distance of 457 mm. The demonstration machine is in its original condition and comes with full warranty. Redpfx Aeyk Dtzekijch Technical specifications: - Centre height approx. 190 mm - Max. centre distance 457 mm (optionally extendable!) - Spindle thread M33 x 3.5 with ASR (Euro) runout safety groove* - Spindle and tailstock taper: MK2 - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-step indexing function on the display - Motor: 1.5 hp (230 V) with forward and reverse operation - Tailstock quill stroke: 100 mm (with scale and handwheel with ball-bearing crank) - Four-prong drive centre, live centre, and double taper MK2 - Tool rest (upper tool rest) approx. 230 mm (with 25.4 mm post) - Faceplate 80 mm with ASR (Euro) runout safety groove* - Assembled machine weight approx. 60 kg The machine can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarder: Austria: €70.00 incl. VAT Germany: €80.00 incl. VAT South Tyrol: €100.00 incl. VAT Related terms: Lathe, woodturning lathe, turning machine, turning bench, turning, lathe chisel, woodturning, machine Reference: R-A0117

Condition: as good as new (ex-display), DISPLAY MODEL For sale is an as-new Drechselmeister MIDI 2 PLUS lathe with a maximum turning diameter of 355 mm. The display model is in its original condition, therefore you receive the full warranty. Technical Data - Center height approx. 178 mm / Turning diameter 355 mm - Distance between centers approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection: M33 x 3.5 (taper MK2) with ASR (Euro) anti-release groove* - Tailstock with 100 mm MK2 quill, trapezoidal thread, and graduated scale! - (Optional: quill with ER25 collet system for drilling) - Motor: 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Redpfxotpn Srs Akiech Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please provide your full address in the contact form so we can handle your inquiry professionally! Thank you, your NEUREITER team Related terms: woodturning lathe, lathe, turning machine, woodturning tools, wood turning, turning, machine Reference: R-A0117

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical Rjdpfx Aotv Riaekisch milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is a near-new Drechselmeister MIDI PRO benchtop wood lathe with a center distance of 450 mm. This demonstration unit is in its original condition and therefore includes the full warranty. Technical specifications: - Center height approx. 178 mm (swing over bed 355 mm) - Center distance approx. 450 mm (extendable!) Rsdpstpn Tljfx Akisch - Speed ranges: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) safety groove* - Tailstock with exchangeable quill MK2, 100 mm - Motor: 0.7 kW / 1 HP (230 V) - Forward/reverse operation - 4-prong drive center and live center MK2 - Tool rest 250 mm (shank 25.4 mm) - Faceplate 95 mm - Assembled machine weight approx. 67 kg - Weight of individual components (for easy transport, e.g. to markets): - Headstock 27 kg - Bed 26.4 kg - Tailstock 7.5 kg - Complete tool rest 6.2 kg The machine is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Shipping via freight forwarder: Austria: € 60.00 incl. VAT Germany: € 70.00 incl. VAT South Tyrol: € 95.00 incl. VAT If you are interested in this machine, please provide your complete address details in the contact form so we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, bench lathe, wood lathe, woodturning, turning tools, wood turning, machine Reference: R-A0117

Condition: used, machine/vehicle number: 242350148, -WT 106- Offered here is a table drilling machine of the company Flott of the type TB23L. The table drilling machine stands on a special lifting table (no original lifting table). Technical data: Rcjdpfx Aolf Evcjkioh - 6-fold speed adjustment (manual via belt pulley). - MK2 receptacle

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: Rcsdpfx Akov A S Efsijh a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display *

Condition: good (used), Quick-change chuck, quick-change mount, quick-change head, quick-clamping drill mount, quick-change insert -without: admission -3x Sleeve: MK2 -3x Sleeve: MK3 -4x Sleeve: MK4 -Hole: Ø 42 mm Redpfxecti A Se Akijch -Price/Sale: complete -Total weight: 11.8 kg

Condition: new, functionality: fully functional, spindle bore: 26 mm, turning diameter: 250 mm, turning diameter over top slide: 145 mm, center height: 125 mm, turning length: 750 mm, total length: 1,520 mm, total width: 670 mm, total height: 1,650 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, bed width: 135 mm, type of input current: DC, overall weight: 195 kg, three-jaw chuck diameter: 125 mm, spindle mount: MK 4, Turning and milling combination WMP250BVx750 with brushless motors including a luxury base cabinet LATHE Center distance ----- 750 mm Center height ----- 125 mm Diameter over bed ----- 250 mm Headstock bore ----- 26 mm Headstock spindle mount ----- MK4 Lathe speed ----- 50-2000 continuously variable rpm Motor power ----- 1.1 kW Weight ----- 135 KG MILLING UNIT Rcsdpfx Asga T Emokioh Overhang of milling attachment ----- 170 mm Milling machine speed ----- 50-2250 continuously variable rpm Milling machine spindle mount ----- MK2 Milling head rotatable ----- +/- 90 degrees Travel of milling spindle quill ----- 50 mm Motor power ----- 600W Weight ----- 75 KG

Condition: good (used), Tool holder, milling tool holder -Adapter -Recording: SK50 -Recording tool: 2x MK3 1x MK2 -Drill chuck reducing sleeves spindle tool -Price/Sale: complete Rcedeb E S Ngjpfx Akioh -Weight: 9 kg

Condition: used, Year of construction: 1989, Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen Rcedpohx E T Hefx Akish -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 wood lathe with a center distance of 560 mm. The demonstration machine is in its original condition, so you receive full warranty coverage. Technical Specifications - Center height: 180 mm - Swing over bed: 358 mm (can be extended with optional outboard turning attachment – depending on workpiece) - Center distance: approx. 560 mm (extendable) - Spindle connection: M33 x 3.5 with ASR (Euro) anti-loosening groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt ranges): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), with trapezoidal threaded spindle - Motor: 1.1 kW / 1.5 HP (230 V) - Total length: 1,345 mm - Weight, freestanding version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by carrier: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, woodworking lathe, turning, woodturning, turning tools, wood turning, machinery Rcsdstphy Ajpfx Akijh Reference: R-A0117

Condition: new, Motor ----- 750W - 230V - 1 Phase Drilling capacity ----- 20 mm Quill stroke ----- 82 mm Spindle taper ----- MK2 Variable speed Spindle speed 400 ~ 2000 rpm Work table ----- 305 x 305 mm Base ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 1590 mm Weight ----- 74 kg Packaging ----- 1150 x 500 x 300 mm INCLUDED * Digital depth stop Rcedpfega T Hcsx Akioh * Digital spindle display * CE guard * Laser device * LED lighting * CE emergency stop * Drill chuck with MK2 taper * Drift key

Condition: new, Motor: 750W - 230V - 1 Phase Drilling capacity: 20 mm Spindle stroke: 85 mm Spindle taper: MK2 Number of speeds: 16 Spindle speed: 220-2840 rpm Work table: 305 x 305 mm Base: 460 x 280 mm Column diameter: 72 mm Overall height: 990 mm Weight: 60 kg Packaging: 820 x 500 x 290 mm INCLUDED * Digital depth stop * CE protective shield Rcedpfx Akok Iuqysijh * Laser guide * LED lighting * CE emergency stop * Drill chuck with MK2 taper * Ejector pin