Milling machine

Steinel SV 4

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut Kedjnlbmzepfx Aa Esnf - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Kjdpfed Hl Stox Aa Esnf Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer Kodpfx Aaofqpxie Eonf - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: excellent (used), Vertical band saw JAESPA type MSU 4roller diameter 420 mmoutreach 400 mmtable size 615 x 615 mmcutting height 350 mmsaw blade length min. 3450 - max. 3640 mmsaw blade speed 20-2500 m/min. stepless mains connection 400 volt, 50 Hz - stepless saw band speed over 2 motor speeds, 2 gear stages and stepless belt drive - saw table swivelling - 2 gear stages - saw blade butt welding machine IDEAL BS 0-16- saw blade shear - grinding stone for grinding the weld seam space requirement L x W x H 1100 x 950 x 2000 mmWeight approx. 700 kgsehr good, immediately operational condition2 identical machines in stock Knjdpfxjd Tx D Uj Aa Eef

Condition: new, OPTIMUM OPTIsaw S275N metal band saw - Exhibition machine - Feed infinitely adjustable, tiltable ----- Technical data ----- Swivel range: 0 - 60 °, Ksdpeu R S Hpjfx Aa Eenf Cutting height: 150 mm, cutting depth: 230 mm, Saw blade speed: 45 / 90 m/min, Saw blade length: 2,480 mm, Motor 400 V: 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new exhibition machine -

Condition: good (used), Manufacturer: KOVOSVIT MAS Type: VO 50 / 1600 Year of construction: 1998 Specifications: Metric Metric US Standard Arm length 1600 mm Max. Drill Ø iron 60 mm Max. Tap diameter 42 M Quill stroke Knjdpfx Aajr Dr T Is Eof 310 mm Max. Distance spindle - table 1505 mm Min. distance spindle - table 320 mm Table / footprint 1470 x 986 mm Spindle speed 2500 rpm Tool holder 6 ISO/Bt/Mk Quill Ø 55 mm Power output 4 kW Dimensions (estimate) length 2900 mm width 1200 mm height 3200 mm weight 4700 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting Kodpfx Aaoi D Dgwo Eonf H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 1,5 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 280 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Discover our selection of robust and precise conventional lathes! Are you in search of a reliable lathe that boosts your productivity? Experience precision and performance with our new conventional lathes equipped with a wide range of accessories. Our machines offer turning diameters from 400-1000mm and turning lengths up to 10m, also available as a cycle variant. With various models, you have limitless possibilities. Some machines are quickly available from stock! Explore our extensive special accessories, such as hollow spindle, infinitely variable speeds, Siemens controls, and more, to make your lathe even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results. Trust in our long-standing experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here's a selection of STOCK MACHINES (see images), and we are happy to offer additional models or special machines upon request: Technical Main Data: DLZ Series including 15% or more BAFA subsidy! - Turning diameter over bed: 400-1000 mm - Turning length: 1000/1500/2000/3000 mm - Spindle bore: 80 (opt. 105) mm - Workpiece weight up to 2t - Spindle speed up to 2800 rpm Accessories: Digital display, 3-jaw chuck, faceplate, Multifix tool holder, and more. Extensive SPECIAL ACCESSORIES such as infinitely variable speed, steady rests, larger spindle bore, and more to make the machine even more productive. Currently available new machines with warranty and BAFA subsidy, for example: - SDM 850: Turning diameter over bed 850mm, turning length 3m - DLZ 325: Turning diameter over bed 650mm, turning length 2m and 3m - DLZ 250: Turning diameter over bed 500mm, turning length 1m and 1.5m - DLZ 200: Turning diameter over bed 400mm, turning length (missing information) More models (also with cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our service for you: - Consultation and solution finding at your location Kedpfx Ajd Afn Isa Esnf - Organization of machine transport to your facility - Installation, assembly, commissioning, and ready-to-use handover - Financing and exploration of funding opportunities through KFW and BAFA, and more.

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U Kedst Tqgxjpfx Aa Ejnf total power requirement 9 kW weight of the machine ca. 4,5 t

Condition: used, machine/vehicle number: 242350148, -WT 106- Knsdpfx Aslf Evcea Ejf Offered here is a table drilling machine of the company Flott of the type TB23L. The table drilling machine stands on a special lifting table (no original lifting table). Technical data: - 6-fold speed adjustment (manual via belt pulley). - MK2 receptacle