Used Special Machines for sale (71,928)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 32026, compressed air connection: 9 bar, overall weight: 60 kg, input voltage: 230 V, warranty duration: 12 months, Dry Ice Blaster GR II New device 10 kg ice hopper capacity 3 mm pellets 5 meter blasting hose LED light on the gun 7 mm round nozzle 25 mm flat nozzle 5 meter air hose Technical performance: 9 bar Max air flow: 4200 L/min Air pressure regulator: 1-9 bar Ice feed regulator: 0 - 70 kg ice per hour Nsdpjyh Hr Ssfx Ac Aslg

Condition: excellent (used), Material Testing Machine / Universal Testing Machine Type: BT2-FZ1.0TN.D16.001 Base System: zwickiLine Z1.0 TN Special Torsion Multi-Axis Material Testing System 1 kN / 2 Nm Technical Data: Testing Range: Maximum axial testing force Fmax: 1 kN Configured maximum testing torque Mmax: 2 Nm Types of tests: Tensile, compressive, and torsional Axial drive / crosshead: Crosshead speed: 0.0005 to 2,000 mm/min Max. return speed: 2,000 mm/min Speed deviation: max. 0.05 % Path resolution: 0.0554 µm Positioning repeatability: ±2 µm Controller: adaptive Nledpfx Acjzwvtxe Aeg Control cycle: 1,000 Hz Testing chamber: Testing chamber height with crosshead angled upwards: 235 to 1,065 mm Testing chamber height with crosshead angled downwards: 90 to 920 mm Testing chamber depth: 105 mm Dimensions of base machine: Height of load frame without head crosshead: approx. 1,289 mm Width with machine electronics: approx. 411 mm Depth with machine electronics: approx. 622 mm Weight of base machine: approx. 76 kg Type: Torsional drive Item No.: 1023835 Maximum drive torque: 20 Nm Rotational speed: 0.01 to 20 rpm Accuracy of set drive speed: 0.05 % Control cycle: 1,000 Hz Axially permissible testing force on the torsional drive: ±5 kN Power connection torsional drive: 230 V / 1 Ph / N / PE Mains frequency: 50 / 60 Hz Power consumption under full load: approx. 2.3 kVA Torque sensor: Item No.: 069536 Rated torque: 2 Nm Limit torque: 150 % of the rated torque Accuracy class 1 from: 0.008 Nm Accuracy class 0.5 from: 0.02 Nm Protection class: IP65 Force sensor: Type: Zwick / Roell Xforce HP Item No.: 069531 Rated force: 1 kN / 225 lbf Max. operating force: 150 % of Fnom Accuracy class 1 from: 2 N Accuracy class 0.5 from: 10 N Protection class: IP54 Measurement and control electronics: Zwick / Roell testControl II Measurement value acquisition rate: 400 kHz Measurement value transfer to PC: 500 Hz Optionally expandable to: 2,000 Hz Control cycle: 1,000 Hz PC interface: Ethernet Measurement signal runtime correction: for all channels Protection class electronics: IP32 Safety device: Swiveling front safety device Electrically monitored interlock Protective screen made of transparent polycarbonate Material thickness of protective screen: 6 mm Dimensions of safety device: Height: approx. 1,237 mm Width: approx. 435 mm Depth: approx. 238 mm Testing tools / accessories: Pneumatic universal holder for pen systems Max. clamping force: 200 N Compressed air supply: 8 bar, filtered and unlubricated Pneumatic 3-finger gripper Max. clamping force: 50 N Compressed air supply: 8 bar, filtered and unlubricated Alignment unit Torque sensor 2 Nm Xforce HP force sensor 1 kN Torsional drive Front safety device Zwick/Roell machine electronics Software: Zwick / Roell testXpert III testing softwareVersion: 1.2 + ALMEMO 2450 universal measuring device Humidity/temperature sensor FHAD4641 + Mettler Toledo precision balance Type: Mettler WXSE + Visual recognition system color Zwick Item No.: 3004644 Vision sensor: IV-G500CA Evaluation unit: IV-G10 Installation distance: 20 to 500 mm + Auto Injector Condition: used Optical condition according to the pictures Functionality according to the pictures The complete configuration of all components and accessories, as well as the calibration of the system, must be carried out by the customer themselves. Subject to changes, errors and prior sale.

Condition: used, Second-hand machine In all operating modes, the materials are fed from the front through the roller gap and joined together by pressure Standard number of axes: Material unwinding 2 Silicone paper unwinding 1 Roller gap adjustment 0–52 mm Pressure 0.3–0.8 N/mm Processing speed maximum 5 m/min Slow operation 0.6 m/min Reverse operation 0.6 m/min Noise level > 70 dB(A) Material data: Max. width 1400 mm Max. material diameter: Unwinding diameter 200 mm Silicone paper take-up diameter 150 mm Max. panel thickness 50 mm Inner diameter of roll core: 76.2 mm Nlsdpfxoznk A No Ac Asg Power supply 230 V Availability: short notice Storage location: Röllbach

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal Nedpfey Ipy Ajx Ac Aslg • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Year of construction: 1980, condition: good (used), Equipment: 4 horiz. Pinol drilling units, 3 vert. Pinol drilling units rotary table diameter: 400 mm rotary indexing table: 60° pitch weight: 2,6 to Njdpfxenvdmwo Ac Aelg 1 switch cabinet 1 coolant tank

Condition: used, Type: FM611E1 400V/3N - 15A - 50Hz - 9.2kW Nedpfx Acszcgc Ne Aelg dimension Length: 980mm Width: 770mm Height: 840mm

Condition: new, The machine does not include a stand. The BF3 Deluxe stand is available separately under item no. 56-1017. Technical specifications: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. cutter head diameter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle mount: MT4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm / rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head tilting: -60° to +60° Distance spindle to table: 95 - 485 mm Milling head height adjustment: 390 mm T-slot size: 14 mm Lifting motor: 90 W Motor power output S1 100%: 1.1 / 1.5 kW (400 V) Motor - Input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Approx. weight: 322 kg Scope of delivery: - 3-axis digital readout ES-12 V with LCD display - Keyless drill chuck 3 - 16 mm / B 16 - Drill chuck arbor MT 4 / B 16 - Drawbar spindle M 16 - Reducing sleeve MT 4 / 3 - Combined milling arbor MT 4 / 27 mm - Height-adjustable protective cover - Automatic spindle sleeve feed - Lifting motor for milling head - LED machine light - Digital spindle sleeve stroke display - Thread cutting device - Lamellar protective cover - Longitudinal measuring scale - Operating tools Without base frame Nlsdpfx Aov N Uyroc Ajg

Condition: used, Year of construction: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General Information / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations in workpieces, with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 3 – Vertical drilling unit, type: BE VK, collet chuck mounting Station 4 – Horizontal drilling unit, type: BE VK, spindle mount: sleeve Ø 36 mm Station 5 – Vertical spindle unit, type: BE VK, spindle mount: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, type BE VK with additional guide, spindle mount: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 8 – Vertical spindle unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 28 mm Drilling feed: mechanical feed via quill Rotary indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manual via collet Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine is designed for high-volume production • Features a robust cast machine table with chip conveyor to the rear and a separate large coolant tank Nlsdpfow E Hpvjx Ac Aeg • Extensive range of clamping devices and auxiliary tools included • The machine is equipped with a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Extremely stable machine bed, also ideally suited for rebuilding as a special-purpose machine

Condition: used, x x x dismantled x Njdpfxsip Rdle Ac Aelg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2015, condition: used, diameter / mm Cutting (quantity) / weight 15000 kg Control Siemens 840D Nlodephu D Topfx Ac Aog Production line - Modular Special Machine (MSM) with clamping device 1 double spindle machining centre Make: GROB Type: Special machine GM4650 Year: 2015 Control: Siemens, type 840D sl CO2 fire extinguishing system, air filter LTA, oil treatment, make: Ruez, type MBF-1000 AS, year 2015 - Operating hours 43,774, spindle hours 1,598 Technical data Machine length: 8400mm Machine width: 2500mm Machine height incl. LIP: 2150mm Machine weight: 15.000kg

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA Nlodsu A Dg Espfx Ac Aeg sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Main switch Synchronous welding control 8036 Weight: 685 kg

Condition: used, Year of construction: 2011, Control Windows XP Nodpeyqulnefx Ac Ajlg print area 550x500 mm Stencil Printer Stencil format: 737 x 737 mm PCB thickness: 6 mm Squeegee speed: 10-80 mm/s Squeegee pressure: 0-260 N The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Steam treatment system preheating tanks pumps for water circulation tanks piping more Nedpfjyt Rx Nox Ac Ajlg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Technical details: diameter: Nr.1: ca. 6 mm diameter: Nr.1: max. 25 mm connection electric: 400 V motor: Getriebemotor / gear motor total power requirement: 0,25 kW Nlsdou Nw Snspfx Ac Ajg weight of the machine approx.: ca. 120 kg space requirements approx. LxWxH: 0,85x0,6x0,1,0 m Wire Peeling Machine Application: peeling of electric wires to be processed parts: wires with PVC coat / rubber coating wire feed via angular rail 40mm on a length of 600mm infeed manual driver roller dia=80x21mm serrated copy of manual is available i.D. *

Year of construction: 2013, condition: used, Type Crack Maschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale! Nledpfx Acey Ihblo Asg

Condition: used, material Stahl Dimensions (L/W/H) verschieden mm Njdpeyqvuksfx Ac Aolg Steel in various dimensions:Example dimensions:250x80x6000 140x120 200x180 330x79x6000 200x200 200x140 approx: 200 to 250 t available The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, material Stahl Dimensions (L/W/H) verschieden mm Racks made of steel for rings or flanges up to 5500 diameter The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Nledpjyqtirofx Ac Aog Your Markus Hirsch Team

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals Nsdpfozmh Awjx Ac Ajlg - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: used, Miter chop saw for aluminum (special machine construction with 4 servomotors) Circular saw, miter saw, crosscut saw Year of construction: 2002 Saw blade diameter: 500 mm Cutting range at 90°: Round Ø 180 Rectangle 350 x 140 mm (through crosscut) Cutting range at 45°: Round Ø 180 Rectangle 350 x 100 mm (through crosscut) Base carriage guide length: 1100 mm Travel on the base carriage (forward/backward): 650 mm Travel on the stand (up/down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power connection: 400 volts, 50 Hz - Controlled crosscut movement - Controlled saw blade height adjustment - Controlled miter cut through pivoting saw head - Controlled miter cut through tilting saw head - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gearbox (Motor MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Axis movement perpendicular via INDRAMAT servomotors and ball screw spindles (Motor MKDO41B-144-KP1-KN) - A total of 4 Indramat servomotors are installed - Very good German machine engineering Space requirement: L x W x H 1150 x 1100 x 1400 mm Nlsdpfodzp T Dsx Ac Asg Weight: approx. 360 kg Good condition This unit comes from a special machine for specific products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, Year of construction: 1984, cycle time 0 sec total power requirement 2,5 kW weight of the machine ca. 1 t dimensions of the machine ca. m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in Njdpfxjt Hwvgo Ac Aolg principle the same as with a punchboard control). With setting microscope and machine lamp.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,900 kg, total height: 25,000 mm, total length: 2,710 mm, total width: 1,040 mm, input voltage: 400 V, We offer a high-performance, low-speed two-shaft shredder designed for effective and precise shredding of aluminum materials, including: 🔹 rods 🔹 strands 🔹 wires 🔹 flat bars 🔹 cables The specially engineered shredding system prevents material from being dragged or crushed — aluminum is efficiently cut, not compressed. The knife design ensures clean and accurate cutting and eliminates the risk of vertically fed material passing through the chamber unshredded. Nlsdpfxjtvdcyo Ac Aeg The knives are made of certified, wear-resistant steel. The shredder is equipped with gear motors from a reputable manufacturer. Available motor configurations: 2 × 18.5 kW or 2 × 22 kW. Fraction size – to be agreed upon with the customer. Model RS8: working shaft length of 600 mm – identical construction to RS800 and RS1200 models. Manufactured in Poland.

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm closing force max.: 2000/ bei 175 bar kN opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 system pressure: 175 bar Nsdpsu Nu N Rsfx Ac Ajlg injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm force of ejector: 120 kN opening stroke: 550 mm daylight: 700 mm total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C The machine is not connected. We sell the machine as described and as is *

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, type of input current: three-phase, input voltage: 380 V, total length: 1,800 mm, total width: 1,500 mm, total height: 2,550 mm, inner diameter: 320 mm, workpiece height (max.): 75 mm, grinding wheel diameter: 720 mm, overall weight: 2,800 kg, input frequency: 50 Hz, Equipment: documentation/manual, 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine Used 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine for Sale – 720mm Grinding Wheels – 6 Carriers – Siemens SIMATIC Touch Control – Coolant Filtration System Manufacturer: Lapmaster International Model: DSG 720 Machine Type: Double Side Fine Grinding Machine Year: 2014 Control: Siemens SIMATIC Touch Control Condition: In storage, Functional but top grinding plate damaged. Machine Description The Lapmaster DSG720 is a precision double-sided fine grinding machine designed to process both parallel faces of components simultaneously. This type of machine is suited to applications requiring close control of flatness, parallelism, thickness and surface finish. This machine is equipped with 720mm outside-diameter grinding wheels, a 6-carrier workholding system, independently controlled upper and lower grinding wheel speeds and a Siemens SIMATIC touchscreen control. Important Condition Note The top grinding plate / upper grinding wheel assembly is damaged and requires replacement. The machine is therefore being offered with this known defect clearly disclosed. Prospective purchasers should allow for the replacement of the top grinding plate before returning the machine to normal production use. Main Specifications Manufacturer: Lapmaster International Model: DSG 720 Year: 2014 Machine Type: Double Side Fine Grinding Machine / Double-Sided Grinding Machine Grinding System Njdpfxez E A Icj Ac Ajlg Grinding Wheel Outside Diameter: Approx. 720mm Grinding Wheel Inside Diameter: Approx. 320mm Wheel Size: Ø720 x Ø320mm Number of Workpiece Carriers: 6 Upper Grinding Wheel Speed: 0–130 rpm Lower Grinding Wheel Speed: 0–130 rpm Inner Pin Ring Speed: 0–100 rpm The double-sided grinding arrangement allows both sides of suitable components to be processed simultaneously, helping achieve consistent component thickness and parallelism. Electrical Specifications Operating Voltage: AC 380V, 3 Phase Frequency: 50Hz Installed Power: Approx. 18kW Current: Approx. 50A Pneumatic Requirements Normal Air Supply: Approx. 5–6 kg/cm² / 0.5–0.6MPa Minimum Working Pressure: Approx. 4 kg/cm² / 0.4MPa Siemens SIMATIC Touchscreen Control: The machine is equipped with a Siemens SIMATIC touchscreen operator control. Coolant Filtration System Included: The Lapmaster DSG 720 is supplied with a separate coolant filtration system. Approximate Machine Dimensions Machine Width: Approx. 1,800mm Machine Depth: Approx. 1,500mm Machine Height: Approx. 2,550mm Net Machine Weight: Approx. 2,800kg Key Features 2014 machine Lapmaster International DSG 720 Double-sided fine grinding process Ø720mm outer-diameter grinding wheels Ø320mm grinding wheel inner diameter 6 workpiece carriers Upper wheel speed 0–130 rpm Lower wheel speed 0–130 rpm Inner pin ring speed 0–100 rpm Siemens SIMATIC touchscreen control Separate coolant filtration system Feed Tables Included 18kW installed power 380V, 3-phase, 50Hz Approx. 2,800kg machine weight Precision simultaneous grinding of both component faces Please Note: All specifications, dimensions, capacities and machine details quoted above are approximate and are provided for guidance only. Prospective purchasers should verify all important specifications, machine condition, tooling requirements and operating requirements prior to purchase.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. Nljdpfx Aol Dw D Esc Ajg The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Year of construction: 1992, condition: used, Power: 80 kW (109 HP) Number of cylinders: 6 Dimensions (LxBxH): 750 x 245 x 280 cm Track width: 4 cm Crane: Yes Serial number: 65539 Anchor Drilling Rig Hour meter reading: 11,385H Drill mast: • Type: 200V • Mast length: 6,000 mm Double drill head Drill motor 1 • Type: KH13 Drill motor 2, for hammer rods • Type: KD1011 Equipped with a crane • Brand: Hiab • Type: 020 Engine: • Brand: Deutz Nlodez Df Rqspfx Ac Aog • Engine power: 109 kW • Number of cylinders: 6 Track width: 400 mm Overall dimensions: 7,500 x 2,450 x 2,800 mm Remarks: signs of wear Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.