Mitre circular saw

GRAULE ZS 170 NS

Condition: used, cutting width 90°: 410 / 45°:290 mm Cutting height 170 mm Fsdpoy Ihahsfx Agxjgi Cutting height at 45° 115 mm saw blade diameter 420 mm machine weight ab. 150 kg Saw blade 40 mm saw blade turning speeds 3350 U/min

Condition: used, functionality: fully functional, machine/vehicle number: M5608*10687, Year of construction: 2001, operating hours: 35,000 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,750 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork length: 2,400 mm, empty load weight: 19,321 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,550 mm, Heavy-duty forklift - Diesel Chassis number: M5608*10687 Load center: 600 Mast type: Triplex Fgodpoyldxmjfx Agxei Transmission: Clark 13.7HR32334-104 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 40 - 60% Side shifter, fork positioner, Full cab, twin tires,

Condition: excellent (used), Notching saw GRAULE AS450 Shipment EU ~300euro Fedpfol Skkfox Agxogi

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Fgodpfjdy Hm Dex Agxei Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. Fgedpfxeh Ek Daj Agxji The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Fsdszuyl Tjpfx Agxegi Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of construction: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t - Main saw motor: 18.5 kW - Scoring blade motor: 2.2 kW - Main saw blade: Ø 400 mm, 1 piece included - Scoring saw blade: Ø 200 mm with trapezoidal teeth, 1 piece included - Saw blade lifting via brushless motor and ball screw - Control of the pressure beam opening - Electronic DIGISET alignment of the scoring saw blade to the main saw blade - Scoring unit can be deactivated via the control panel - QUICK CHANGE system for both saw blades - Travel speed of the saw carriage: 1-160 m/min, brushless drive - Maximum feed speed: 90 m/min, brushless drive - Side alignment unit integrated into the saw carriage (0 mm + 3,500 mm according to the quotation specifications) Loading and unloading devices - Rear loading onto the lifting table with powered rollers and automatic stack positioning at the zero point - Powered rollers on the lifting table for side loading - Loading and unloading from the right side under constant operator control - Two panel counters for the automatic feeding of thin, calibrated panels from 2.5 mm thickness - Automatic detection of the lower support plate based on the thickness set in the machine parameters - Six liftable pneumatic grippers in the standard configuration - Two additional liftable pneumatic grippers with double lower fingers for mounting on the slide - Two push contact points - Two front alignment stops - Eleven standard roller modules and two additional roller modules with wheels - One discharge table with dimensions 2,050 × 850 mm with non-driven rollers, replacing the standard air cushion discharge table with dimensions 2,050 × 620 mm - Two additional rounded air cushion discharge tables, each with dimensions 2,050 × 620 mm - One fan for up to six air cushion tables Control, maintenance and safety - Windows-based PC control with flat screen, keyboard and mouse - OSI-Plus interface - Measuring system on the control panel for manual cuts - Remote start button for the working cycle with safety stop, located at the second or third table - Automatic lubrication - Protective devices and safety devices The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1988, Krauss Maffei KM 250-900B Closing force: 250 tons Fsdpfxsfp U Hvs Agxegi Year of manufacture: 1987 Injection weight: 470 g Tie bar spacing: 63 x 56

Condition: used, STOW double-sided cantilever racks – used – excellent condition. The STOW wall-mounted cantilever rack is constructed of solid, heavy-duty steel profiles (I-beams) with high strength. It is equipped with 5 arms. The cantilever rack can be expanded with additional sections (modules), adapting it to changing storage needs. The offer applies to a STOW single-sided cantilever rack with 1 or 2 modules: Product code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 270 mm Net price: €1069.00 net per 1 module/section. Product code: MPP001694 Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €1239.00 net per module/section. Product code: MPP001695 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 330 mm Net price: €1569.00 net per module/section. Product code: MPP001699 Height: 750 cm Depth: 267 cm Fedpfsx Ig Hmox Agxogi Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg I-beam profile cross-section height: IPE 270 mm Net price: €2,079.00 net for 2 modules/sections. Product code: MPP001700 Height: 750 cm Depth: 270 cm Spacing: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile cross-section height: IPE 300 mm Net price: €2,479.00 net for 2 modules/sections. Product code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1000 kg Height of I-beam profile cross-section: IPE 300 mm Net price: €3139.00 net for 2 modules/sections. In addition, we have large quantities of storage racks from various companies, e.g. MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION PROMAG, etc., with high load capacity, available, undamaged, in very good technical condition, as well as comprehensive products for them, such as crossbars, mesh shelves, WEMA grates, bumpers, mounting anchors, etc. Of course, if you have your own transport, you can collect the goods from our warehouse in Chmielów 39-441 in Poland. * I have large quantities. * Transport possible throughout Europe. * Location: Poland

Condition: new, Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 200 mm, saw blade diameter: 520 mm, rotational speed (min.): 2,800 rpm, cutting length (max.): 420 mm, workpiece height (max.): 200 mm, feed length X-axis: 420 mm, length stop: 8,800 mm, pressure: 5 bar, space requirement length: 8,800 mm, space requirement width: 1,200 mm, Equipment: double-sided, Mobile saw base frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 - 5960 mm, with digital LED measurement display, measuring length including extension approx. 8800 mm, Saw base frame with 6 crank supports ensure safe standing when working. With electrical power distribution and 3-way socket 230 V Fgsdpsv Hhg Tefx Agxoi Mobile saw base frame Beck ESF 1, saw ZS 200 mounted on base frame

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 14,890 h, load capacity: 22,000 kg, lifting height: 3,800 mm, free lift: 150 mm, fuel type: diesel, mast type: duplex, construction height: 3,710 mm, motor manufacturer: Scania, gearing type: hydrostat, tire condition: 85 %, overall weight: 33,200 kg, total length: 6,050 mm, total width: 3,030 mm, color: yellow, Heavy-Duty Forklift SMV SL22-1200A Brand: SMV Forklift Type: SMV SL22-1200A Year of Manufacture: 2001 Operating Hours: approx. 15,000 h Mast Type: Duplex Lifting Height: 3,800 mm Overall Height: 3,710 mm Free Lift: 150 mm Drive Type: Diesel Engine: Scania Vehicle Width: 3,030 mm Vehicle Length: 6,050 mm Total Weight: 33,200 kg Rated Capacity: 22,000 kg at 1,200 mm load center Special Features: Full cabin, heating, air conditioning, street-legal lighting, beacon, Fjdpsy A Sgbjfx Agxjgi work lights front and rear, fabric seat, panoramic mirror, Service and FEM 4.004 inspection - NEW Attachments: Sideshift and fork positioner Forks: 2,400 mm