Used Milling And Drilling Machine for sale (87,742)

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer Tsdpfx Aju Tln Nehuof - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 410 mm, spindle speed (max.): 2,400 rpm, spindle speed (min.): 120 rpm, type of input current: three-phase, table length: 670 mm, table width: 300 mm, Sixis S-103-R 3 Phase 380v motor runs fine. Tjdpfx Ajwbkpfohuef 9 Spindle speeds adjustable from 120 up to 2400 RPM. Power feed on the X & Z axis. Stepless adjustable feed rate. Axis travel: X: 450mm Y: 170mm Z: 410mm Table can also slide over the apron. Table size: 670x300mm Head is under degree adjustable. ISO30 Spindle intake. Coolant pump in machine base. Overall dimensions: 115x110x150cm Swiss made machine tool. Include's accessories as shown on pictures! Contact us for shipping options! €4,750.00

Condition: not inspected (used), functionality: unexamined, total length: 5,000 mm, stroke length: 100 mm, rotational speed (max.): 2,000 rpm, overall weight: 150 kg, No reserve price – guaranteed sale to the highest bidder! Tedpow Htcfjfx Ahuef Loading can take place on 08.09.2025 or 09.09.2025! TECHNICAL DETAILS Performance data Speed range: 355 - 2,000 rpm Processing stroke: 100 mm Max. stop: 3,000 mm Roller conveyor length left: 1,580 mm Roller conveyor length right: 2,200 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 5,000 x 6,100 x 1,900 Weight: 150 kg EQUIPMENT Roller conveyors left & right

Condition: ready for operation (used), Universal Milling Head SECMU Maximum speed 2000rpm ISO 50 Never Used Tjdpfx Aexhrffohusf

Condition: excellent (used), - Mitutoyo digital readout. - Accessories available. Travel distances: X-axis travel: 280 mm Y-axis travel: 210 mm Tjdpfsw Hqh Eex Ahusf Cross table: KS 255 Spindle speeds: 135 – 4,500 rpm

Condition: good (used), Friedrich Deckel FP 2 LB Toolroom Milling Machine The accessories are not included in the scope of delivery but can be purchased separately. The Deckel FP 2 LB universal milling machine is characterized by its extremely stable base frame and is designed as a traveling column machine. This means that the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for the direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as those found in American V8 engines. The long travel of 800 mm is also advantageous in this application. Technical Specifications: Deckel Universal Milling Machine FP 2 LB Digital Display: 3-Axis Digital Display Heidenhain X-Axis Travel: 800 mm Y-Axis Travel: 300 mm Z-Axis Travel: 400 mm Tool Holder: SK 40, Drawbar Thread S 20 x 2 Milling Head Type: Vertical Milling Head Speed Range: 40 - 2000 rpm Number of Steps: 18 Table Type: Universal Swivel/Tilt Table (± 45° / ± 15°) Table Clamping Area: 1000 x 520 mm T-Slot Size: 16 mm Vise 160 mm Power Consumption: 9.5 kVA Weight: Approx. 1900 kg Dimensions: Approx. 1570 x 1675 x 1850 Other Items - New and Used - can be found in our shop! International shipping costs on request! Tsdsgyw S Tspfx Ahusf

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 Tjdpfx Aheu R Tftouef - Exhibition machine - This offer is an equipment package. The following items and options are already included in the price: - OPTImill MB 4 Optimum precision drilling and milling machine - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: good (used), Year of construction: 1993, Tool holder SK40, speed range 20-4000 rpm, clamping area 1.100 x 600 mm Todpfslcbggsx Ahusf

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 very good condition Technical Data: Tedpsukf Ncjfx Ahuef >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm >> Feed speed X/Y 1 - 2000 mm/min >> Feed speed Z 1 - 1200 mm/min >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Year of construction: 1987, condition: good (used), max. drilling and milling diameter 20 mm maximum drilling depth 180 mm the largest drilling length 180 mm table surface dimensions (length / width) 280/600 mm the greatest distance from the table surface to the spindle axis 130 mm spindle speed 2800 rpm. Todpfx Aeiduhzehusf engine power 2.2 kW air demand for sawdust extraction suction 300-350 m3 / h air speed in the extraction system 19-22 m / s squeegee tip connection diameter 80 mm dimensions (length / width / height) 1240/800/1350 mm weight 350 kg

Condition: excellent (used), - Heidenhain digital display. - Accessories available. Travel paths: X – travel 280 mm Y – travel 210 mm Tjdpfx Ahjw Hqf Reusf Cross table KS 255 D Spindle speeds 135 – 4,500 rpm

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Tsdpfx Aswiucfjhujf Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and weights Width 2450mm Length 2800mm Height 2000mm Net weight of the machine: approx. 2570 kg. Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1959, There are 3 old used machines without documentation available. 1x multi-spindle drilling machine Hille type: BG 80, year of manufacture: 1959. 1x NC milling machine SHW type: UE 21. 1x radial drilling machine Raboma type: SKM. All machines in working order. On-site inspection is possible. Tsdpetk Rwlefx Ahujf

Condition: new, Bernardo drilling and milling machine FM 50 HSV incl. 3-axis digital display drilling capacity in steel 32 mm drilling capacity in cast iron 40 mm cutter head milling cutter max. 80 mm throat 220 mm spindle speed (12) 75 - 3200 rpm spindle mounting MK 4 quill stroke 120 mm spindle sleeve feed (3) 0.10 / 0.18 / 0.26 mm/rev. table size 800 x 240 mm travel (x / y) 555 / 225 mm milling head tiltable -60° to +60° distance spindle / table 95 - 485 mm Toded Du Tfjpfx Ahusf height adjustment milling head 390 mm T-slot size 14 mm Lift motor 90 W Motor output power S1 100% 1.1 / 1.5 kW (400 V) Motor input power S6 40% 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)* 1140 x 970 x 1460 mm Weight approx. 322 kg Scope of delivery - 3-axis digital display i200 with LCD display - Quick-action drill chuck 3 - 16 mm / B 16 - Drill chuck mandrel MK 4 / B 16 - tightening spindle M 16 - Reducing sleeve MK 4 / 3 - Combination arbor MK 4 / 27 mm - Height adjustable protective cover - Automatic quill feed - Lift motor for milling head - LED machine light - Digital quill stroke display - Thread cutting device - Blade protection cover - Longitudinal measuring scale - Operating tool

Condition: new, 1PC NEW/OPEN BOX HBM LOAD CELL / RTNC3/10T Tedpfx Aeultf Ujhuof

Condition: used, Year of construction: 1993, Machine: Double-sided through-feed operation with additional: 4 drilling supports vertically from above 4 drilling supports horizontally from behind Tedpfowbuw Tex Ahusf Units: Tiltable Workpiece length (mm): 330 - 2500 Workpiece width (mm): 40 - 180 (200 mm for straight cuts) Workpiece thickness (mm): 15 - 80 mm Dowels (mm): 8 + 10 + 12 x 30 + 40 + 50 Dowel projection (mm): 10 - 25 Machine dimensions: Length (mm): 8040 Width (mm): 5850 Height (mm): 2500

Condition: excellent (used), Heidenhain digital readout. Fehlmann cross table: KS 255. Accessories: available. Todpfx Ahow Hqdmsuef Working range: Quill stroke Z-axis 110 mm Machine head travel 450 mm Table spindle nose 0 - 527 mm Quick-change systems SF 32 Work spindle 2.9 kW Speed range infinitely variable 50 - 6300 rpm Clamping surface 255 x 550 mm Dimensions and weight: Space requirement W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg

Condition: new, Year of construction: 2022, Bavelloni VDM1636 series vertical milling and drilling machine. + additional options : - pre-setting of drill bits , whetting , - Barcode reader , - additional Camnay office software. VDM 1636 CN is an NC vertical milling and drilling machine designed to automatically perform complex drilling and milling cycles. Equipped with one double drilling head (1 + 1 opposite spindles), each equipped with a rotary storage tool (8 positions each). The machine, characterized by great ease of operation, has been designed in accordance with the most advanced technical solutions to ensure extremely high accuracy in work. The dual rotary tool storage with 8 positions allows drilling, countersinking and milling at a single workstation. Easy to use, fast and precise in execution thanks to the technological solutions used: 5.5 kW spindles, spindle movements with ball guides, latest generation NC brushless motors with easy and intuitive software Possible work Tedpfstui R Dsx Ahujf In one automatic cycle, the VDM 1636 CN can process the following operations: - Drilling - Countersinking - Milling - Cutting out Holes can be made at any point on the glass surface. The new control console used in the VDM1636 milling and drilling machine combines all the advantages of numerical control. This interface can work in a network with other machines . It can also be connected to the BAVELLONI network, so that the manufacturer's remote service is possible. The main features of this system are: - Programming while the program controls the movements of the machine, the operator can easily work on the computer. - Simple and direct graphical interface. - Data transfer via commercially available tools . VDM 1636 CN is equipped with one of the most advanced software systems (CAD / CAM) specifically designed for glass processing by numerically controlled machining centers is unique in performance, reliability and ease of use, thanks to the use of state-of-the-art technical solutions

Condition: new, ELMAG gearbox milling and drilling machine MFB 30 Vario MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario With the compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines, precise workpiece machining is a pleasure in any position thanks to a swiveling machine head. The MFB 20 Vario was specially developed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, it covers a wide range of sizes commonly used in model making and mechanical engineering. Digital displays for speed and drilling depth and infinitely variable speed control provide optimum support. Standard equipment - Quick-action drill chuck B16, 1 - 16 mm - Taper arbor MK 2 / B 16, thread M10 - Tightening spindle M10 Tsdpfxst Ef Dij Ahuef - Tool set - Operating instructions / CE ADVANTAGES Face milling - End milling - Drilling Stepless speed adjustment Digital speed display Emergency stop button Clockwise and counter-clockwise rotation Speed controller Precision micro feed Digital drilling depth display Quill fixing Operating lever with fixation Milling spindle with precision bearing Pull-in spindle for high safety Smooth-running, precise cross table with T-slots and coolant channel Milling spindle protection cover Drilling depth scale Zero-tension release Machine stand optionally available TECHNICAL DATA Drilling capacity in steel 30 mm Tapping capacity M18 Milling capacity face milling cutter 80 mm Milling capacity end mill 20 mm Spindle holder (turning spindle) MK 3 Speed range 1 50 - 750 rpm Speed range 2 150 - 2250 rpm Infinitely variable speed steps Quill stroke 70 mm T-slots, width 14 mm Milling head stroke 370 mm Spindle projection 180 mm Milling head swivel range ± 90 ° Quill distance table 90 - 460 mm Milling table surface 700x210 mm Table travel X x Y 425 x 220 mm Motor power 1100 W Mains connection 230/50 V/Hz Cubature 700x210x460 mm Length x width 970 x 710 mm Height 1190 mm Weight 240 kg

Condition: new, Bernardo Bohr - and milling machine KF 60 incl. 3-axis digital display and y-feed Technical specifications Drilling capacity in steel 35 mm Drilling capacity in cast 40 mm Threading up to M 16 Projection 210-550 mm Spindle head pivot range 90 ° Spindle speed (8) 115-1750 U/min ISO 40 spindle adaptor Quill stroke 125 mm Table size 800 x 240 mm T - slot size 16 mm Swivel table 45 ° to + 45 ° Distance from spindle / table 120-375 mm Travel longitudinal (x) 375 mm Stroke transverse (y) 175 mm Travel vertical (z) 255 mm S1 motor power output 100% 0.85 / 1.5 kW motor power input S6 40% 1,1 / 2,2 kW Machine dimensions (W x D x H) 1300 x 1400 x 2100 mm Weight approx. 750 kg package • 3-axis digital display i200 with LCD display • Tightening spindle M 16 • LED machine luminaires • Coolant system • Adapter ISO 40/MK 3 • Adapter ISO 40/B18 • Reducing bushing MK 3/2 Tsdpfx Asd Du Tlshujf • Height-adjustable guard • Automatic platen feed x axis • automatic platen feed in Y-axis

Condition: used, Year of construction: 2013, 3-axis system Tjdpfx Aowmqrqehuof Max. glass dimensions: 1600 x 2600 mm Min. glass size: 100 x 350 mm Glass thickness: 3 - 19 mm Hole/double-sided 16 compartments for 16 positions Length: 5850 mm Width: 5500 mm Max. Installation height of the system: 2200 mm

Condition: used, Accessories available. Fehlmann cross table KS 240 Drilling quill digitalized table size 530 - 240 mm X - path 280 mm Y - path 180 mm Todjci Auvopfx Ahusf Speed electronic, stepless with potentiometer 132 - 4500 rpm

Condition: new, ELMAG gearbox milling and drilling machine MFB 20 Vario MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario With the compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines, precise workpiece machining is a pleasure in any position thanks to a swiveling machine head. The MFB 20 Vario was specially developed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, you can cover a wide range of sizes commonly used in model making and mechanical engineering. Digital displays for speed and drilling depth and infinitely variable speed control provide optimum support. Standard equipment - Quick-action drill chuck B16, 1 - 16 mm Tedet Ed Eropfx Ahuof - Tapered arbor MK 2 / B 16, thread M10 - Tightening spindle M10 - Tool set - Operating instructions / CE ADVANTAGES Face milling - End milling - Drilling Stepless speed adjustment Digital speed display Emergency stop button Clockwise and counter-clockwise rotation Speed controller Precision micro feed Digital drilling depth display Quill fixing Operating lever with fixation Milling spindle with precision bearing Pull-in spindle for high safety Smooth-running, precise cross table with T-slots and coolant channel Milling spindle protection cover Drilling depth scale Zero-tension release Machine stand optionally available TECHNICAL DATA Drilling capacity in steel 20 mm Tapping capacity M14 Milling capacity face milling cutter 63 mm Milling capacity end mill 16 mm Spindle holder (turning spindle) MK 2 Speed range 1 50 - 1125 rpm Speed range 2 100 - 2250 rpm Infinitely variable speed steps Quill stroke 50 mm T-slots, width 12 mm Milling head stroke 375 mm Spindle projection 184 mm Milling head swivel range ± 90 ° Quill distance table 0 - 375 mm Milling table surface 500x180 mm Table travel X x Y 280 x 175 mm Motor power 600 W Mains connection 230/50 V/Hz Cubature 500x180x375 mm Length x width 745 x 570 mm Height 935 mm Weight 103 kg

Condition: used, -Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg Tsdpfecyaq Eex Ahujf

Condition: new, MAXION BT 25 FST Drilling and milling machine Accurate, handy and versatile drilling-milling machine. The very smooth running drive and a perfect clamping of the quill guarantee good surfaces when milling. The headstock can be swung out to the side. The cross table is precisely guided and accurately adjustable. Pitch 0.05 mm, clamping device for both axes. Full motor protection. Technical data: Spindle MK 3 tightening thread M 12 quill stroke 100 mm normal drilling capacity 30 mm spindle / cross table 80 to 450 mm table area 600 x 240 mm X- / Y- travel 350 / 160 mm T-slot width 14 mm column diameter 110 mm total height max. 1.920 mm weight 340 kg Motor pole-changing 0,8 / 1,5 kW Mains connection 400 V / 50 Hz Spindle speeds infinitely variable 80 - 1,400 min-1 80 - 1,400 min-1 Tjdpfegv I Ucex Ahuef 120 - 2,160 min-1 120 - 2,160 min-1 160 - 2,800 min-1 160 - 2,800 min-1 Scope of delivery: Base cabinet with door, cross table, pull bar, quill clamp, Fine feed Additional accessories / options: Tapping device, Digital drilling depth display, Motorized height adjustment, Electric cooling device, Anti-rotation device, Height adjustment and clamping from the front, Cutter chuck, Collets, Chip tray, Digital display table axes, 3 drilling feeds AV, Spindle SK 30 with M12 (DIN 2079), Drilling packages.