Engraving tool grinding machine, milling cutter grinding machine, tool grinding machine, drill bit g

MBB - Maschinenfabrik Baden Baden FSS

Condition: new, Bernardo DG 32 Pro Drill Grinding Machine Specifications Drill diameter: 2 – 32 mm Point angle: 90° - 135° Speed: 4800 rpm Motor power: 0.25 kW Voltage: 230 V Length: 350 mm Width: 210 mm Height: 305 mm Weight approx.: 32 kg Scope of delivery • SBC diamond grinding wheel • ER 20 collets, 3 – 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) • ER 40 collets, 13 – 32 mm, 20 pcs. (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) • ER 20 or ER 40 collet chuck Features • Includes a setup for point grinding, i.e., improved centering of the drill tip on the workpiece and reduction of the required feed force • 30 ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes • Additional station for back-grinding the drill cutting edges (relief angle) • Universally adjustable point angle from 90° - 135° • Rotor with precision ball bearings ensures smooth running • Fast and precise working results due to simple operation • Vibration-free operation due to high inherent weight and rubber feet Gkodjgd H U Ujpfx Acijb

Year of construction: 2008, condition: ready for operation (used), overall weight: 3,800 kg, spindle speed (max.): 600 rpm, number of axes: 5, This 5s SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle peak power of 16 kW. The machine supports a variety of workpiece sizes, with a maximum diameter of Ø 20 mm and a weight capacity of 1 kg. If you are looking to get high-quality grinding capabilities, consider the SAACKE UWIF cylindrical grinding machine we have for sale. Contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; indexing accuracy ±15"; indexing possibilities 1–999; cumulative pitch error at 100 mm: 8 µm; speed max. 600 rpm • Tool holder: ISO 50 • Spindle clearance holding sleeve: max. 28 mm (with automatic clamping: Ø20 mm) • Nominal drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide height: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Position measuring systems: • A-axis: Direct measuring system • B-, X-, Y-, Z-axis: Indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; backup fuse: separate supply from mains • Compressed air: 15–17 Nm³/h; pressure min/max 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) Gkodpfx Aoyiz R Uocisb • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; NUMROTOplus software (dongle/hardlock required); zero points calibrated using enclosed measuring instructions (no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up design • Max. workpiece: Ø20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø3.0–5.0 mm shank: 40 pcs • Ø5.1–8.0 mm: 32 pcs • Ø8.1–11.0 mm: 28 pcs • Ø11.1–14.0 mm: 24 pcs • Ø14.1–20.0 mm: 20 pcs • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø32 mm × 200 mm; 2.5 kg • Features: Chaotic loading of different workpieces; automatic changing of collets possible • Holding sleeves: Ø6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and space to 3,000 mm × 1,875 mm • Coolant filter system (TRANSOR): To be provided by customer; air for backwashing approx. 700 Nl/min for 5 min every 6–9 hours

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Gsdpehl H Ubefx Aciskb

Condition: used, Parts cleaning system from renowned Austrian company Machine comes from company liquidation, was in operation until the end. Gkodevcrutepfx Aciob Cleaning agents are included.

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm grinding width 375 mm workpiece height 375 mm Gjdpfx Aeunt Iujciekb magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

Condition: reconditioned (used), Year of construction: 1998, Tool Grinder Make: Deckel Model: S0 Year of manufacture: 1998 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Gkjdsy Drkcopfx Acieb Machine no.: 26230 Warranty: 12 months single-shift from delivery. For machines located outside our North Bavarian sales area, travel costs are to be covered by the customer. Accessories: - Grinding wheel with flange - Operating manual Including new electrics On/Off switch in new enclosure with undervoltage release coil to provide restart prevention (e.g. in case of power failure or unplugging the machine) Sold as seen Technically, the machine corresponds to the state of the art at the time of its year of construction.

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm Gksdpfx Acju Ng Ncoisb number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: refurbished (used), Year of construction: 1988, Graver grinding machine Make: Maschinenfabrik Baden-Baden Model: FSS Year of manufacture: 1985 - overhauled, repainted RAL7012 basalt gray, RAL 7035 light gray Machine no.: 2992 Warranty: 12 months single layer from delivery, on the mechanics overhauled by us. The electrics and electronics are excluded, as they have only undergone a functional test. For machines located outside our northern Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Grinding wheel with flange - Operating instructions incl. new electrics On/off switch in new housing with undervoltage coil to realize the restart protection z. e.g. in the event of a power failure or if the mains plug is pulled out Used as seen The machine corresponds technically the state of the year of manufacture at that time. Gkjdetqdqgopfx Acieb

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Gksdpfeyymtdex Acisb Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 1962, Large band saw with a 1250 mm roll diameter with central cutting device Gkjdefnh T Iopfx Acijb 45 kW motor Roll width 120 mm with electric blade tensioning the upper roll has been removed for transport in very good condition, as it has been used little and was overhauled in 1997.