Used Mill Turn Machine for sale (67,224)

Condition: new, Year of construction: 2026, CORMAK AT320 is a professional combination lathe and vertical milling machine designed for precision metalworking in manufacturing facilities, toolrooms, maintenance workshops, and repair shops. By integrating both a lathe and a milling machine into a single compact unit, the operator can perform complex machining operations without removing or repositioning the workpiece, significantly improving accuracy and productivity. The machine is supplied with a complete set of 16 × 16 mm turning tools and an MT3 live center. Key Features 2-in-1 machine – combines a universal lathe and a vertical milling machine in one compact, heavy-duty design. Separate induction motors for the lathe and milling machine provide maximum torque and independent operation. 38 mm spindle bore allows machining of larger-diameter shafts and bar stock. Hardened and precision-ground guideways together with a hardened gearbox ensure long service life and high machining accuracy. Thread cutting without changing change gears enables fast setup for different threading operations. Vertical milling head with ±90° tilt and 360° column rotation provides exceptional flexibility for angular and multi-sided machining. Integrated coolant system supplied as standard extends cutting tool life and improves machining performance. Construction and Technology The CORMAK AT320 is built on a rigid cast iron bed with induction-hardened and precision-ground guideways, ensuring excellent accuracy even during long carriage movements. The 1.5 kW lathe motor provides reliable performance when machining a wide range of materials, including carbon steel, stainless steel, aluminum, and brass. The vertical milling head is mounted on a round column, allowing 360° rotation and ±90° head tilt, greatly expanding the range of possible machining operations. Precision and Productivity The machine is capable of accurate longitudinal, cross, and taper turning, as well as metric and imperial thread cutting. The 12-speed lathe gearbox and 4-speed milling gearbox allow optimal selection of cutting parameters for various materials and machining operations. Standard Equipment Machine stand 160 mm 3-jaw chuck with reverse jaws MT5 and MT3 dead centers Change gears MT3/B16 drill arbor B16 drill chuck (1–13 mm) Coolant system with pump Service tools and oil can Rcjdpforicx Sox Adzof Polish user manual CE Declaration of Conformity CE-compliant safety guards Complete set of 16 × 16 mm turning tools MT3 live center Technical Specifications Lathe Specification Value 3-jaw chuck 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Distance between centers 800 mm Bed width 160 mm Spindle bore 38 mm Spindle taper MT5 Spindle speeds 12 ranges (60–1600 RPM) Longitudinal feed rates 0.1–1.4 mm/rev Cross feed rates 0.022–0.3 mm/rev Metric thread range 17 pitches, 0.5–4 mm Imperial thread range 26 pitches, 9–48 TPI Main motor 1.5 / 1.8 kW, 230 V Milling / Drilling Head Specification Value Maximum drilling capacity 20 mm Spindle taper MT3 Quill diameter 45 mm Quill travel 60 mm Head tilt ±90° Head rotation around column 360° Spindle-to-column distance 170 mm Spindle-to-table distance 45–300 mm Spindle speeds 200, 500, 900, 2200 RPM Milling motor 0.55 kW, 230 V Machine Dimensions Specification Value Overall dimensions (L × W × H) 1450 × 650 × 1890 mm Machine weight Approx. 400 kg (±2%)

Condition: new, Year of construction: 2026, TYTAN CENTER 750 Vario Lathe-Mill Combo 230V | Turning: 250 × 750 mm | Milling: 16 mm | Variable Spindle Speed The TYTAN CENTER 750 Vario is a versatile combination machine that merges a lathe and a milling machine into one compact unit—saving space and increasing functionality. It features independent spindle motors for both turning and milling, each with variable speed control. Ideal for small workshops, industrial repair shops, and home garages, it enables a wide range of machining operations without the need to switch machines. Key Features Two-in-one design – combines turning and milling in one compact, space-saving machine Independent spindle motors with variable speed – allows separate operation of lathe and mill functions LCD displays – precise spindle speed monitoring and adjustments for both units Two spindle speed ranges – adaptable to various materials and machining tasks Complex part machining – reduces repositioning between machines Rigid dovetail guideways – provide high stability during milling operations Technical Specifications Rodew H Rdmjpfx Adzocf LATHE Feature Value Chuck size 125 mm (3-jaw) Max. turning diameter over bed 250 mm Max. turning diameter over cross slide 150 mm Distance between centers 750 mm Bed width 135 mm Spindle bore 29 mm Spindle taper MT4 Spindle speed control Stepless (2 ranges) Spindle speed ranges 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 speeds (0.07–0.4 mm/rev) Tool post size 65 × 65 × 20 mm Max. tool size 12 × 12 mm Compound slide travel 70 mm Cross slide travel 130 mm Longitudinal slide travel 630 mm Tailstock quill diameter 30 mm Tailstock quill travel 70 mm Tailstock taper MT2 Motor power (S1/S6) 0.75 / 0.9 kW / 230 V MILLING HEAD Feature Value Max. drilling capacity 16 mm Spindle taper MT2 Spindle quill travel 50 mm Head tilt range –90° to +90° Spindle-to-column distance 170 mm Spindle-to-table distance 43 – 250 mm Spindle speed range 50 – 2250 RPM T-slots (number × width) 2 × 8 mm Motor power 0.6 kW / 230 V GENERAL Feature Value Machine dimensions (L × W × H) 1350 × 580 × 1630 mm Weight 230 kg Standard Equipment 125 mm 3-jaw chuck with reversible jaws Machine base Fixed centers MT2 and MT4 Drill chuck arbor and holder (MT2/B16) Change gears set Wrenches, grease gun, maintenance tools CE-compliant safety guards

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Rcodpfx Ajzuxn Todzjf Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2008, XYZ SMX 5000 CNC Vertical Turret Milling Machine With Prototrak SMX Control Rcedpfx Aozvp E Eedzef Table Dimension 1,930 x 355mm (4 'T' Slots). Maximum Table Load 850kg. Axis Travel 'X'=1,524mm, 'Y'=596mm, 'Z'=520mm. Quill Ø116mm. Quill Travel 127mm. Spindle Nose to Table 620mm. Spindle Centre To Column Face 520mm. Speed Range 40-5,000rpm (7.5kW Motor). Spindle Taper ISO40. Power Drawbar. S/No. 11100 (2008). With Coolant System, Table Guarding, Work Light, Vertex Heavy Duty Vice (Jaw Width 205mm), Indexing Head 3 Jaw Chuck 200mm, Centre Height 170mm, 8 Drawer Steel Cabinet With Contents Of Spindle Tooling & Clamp Sets. Approx Overall Dimensions L5,805 x W3,143 x H2,690mm. Weight 3,100kg. Note: Machine Had Control Upgrade 2023.

Condition: excellent (used), Year of construction: 2019, Sub-spindle, C-axis SIEMENS 840DSL Turning diameter max 16 mm Turning length 145mm Spindle speeds main & sub-spindle 15'000 rpm Rodpoud Nhhofx Adzocf Tool holder group 1+2: 6 driven positions C-Axis 0.001° Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Portal-Type Multitasking Turning and Milling Center in Gantry Design Brand: SCHIESS | Type: VMG 5-PS | Year of construction: 2010 / Start-up: 2011 The machine can be inspected by appointment. Condition: Operational / ready for use. TECHNICAL DATA: - X-axis (Gantry): 13.500 (20.000) mm - Y-axis (Support slide): 10.900 mm - Z-axis (RAM): 3.000 mm - Drive power RAM: 100 kW - Passage width max.: 6.500 mm - Faceplate diameter: 5.000 mm - Workpiece weight on the faceplate max.: 150 tons - CNC Control System: SINUMERIK 840D sl Rcodjy Dvwyspfx Adzef Additional excellent, comprehensive features. Detailed technical data sheet and information on equipment available on request. No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2019, Sub-spindle, driven tools, Y-axis, C-axis FANUC 32i B-NT-SmartX control Turning diameter max 225 mm Turning length -910 mm Chuck Diameter -210 mm Main-spindle speeds 5'000 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Rcjdpfx Adjvwkirezjf Barloader LNS Sprint 565 S2 Piece catching device Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Rcjdpfx Aszuzpasdzjf Travel range, X-axis: 1,600 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Work table: 1,200 × 1,400 mm Table load: max. 6 t Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, Year of construction: 2003, functionality: fully functional, Mazak Quick Turn Nexus 150/500 YOM 2003 Rcjdpfx Adeyplgtszef Mazatrol PC Fusion Control Mazak Tool Length Measuring System Serial Number 166285 Main Spindle has been fully refurbished 8 Station Turret Programable Tailstock Parts Catcher Swarf Conveyor RH exit Machine has been fully serviced Complete set of Machine Manuals UK buyers - Price £19,995 + VAT

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible. Rcodpfjt Ambwjx Adzsf

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Redpfx Ajzwa Rbsdzocf Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2022, functionality: fully functional, power: 2.2 kW (2.99 HP), travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 190 mm, overall weight: 2,000 kg, Description CNC milling machine (wood router), Schreinerei Bessler Holzfräse Speed 3021, with control console including monitor and keyboard. Rcodpfx Ajzvnazsdzsf Specifications: Designation: CNC milling machine Type: Speed 3021 Serial number: 2022398 Operating voltage: 400 V Motor power: 2.2 kW Year of manufacture: 2022 Total weight: 2,000 kg X-axis travel: 3,000 mm Y-axis travel: 2,100 mm Z-axis travel: 190 mm Tool holder: ER20 Spindle speed: 1,000 to 24,000 rpm Working dimensions: 3,000 x 2,100 mm Overall (transport) dimensions: approx. 415 x 296 x 175 cm Machine weight: 2,000 kg Configuration: Gantry construction with work table Control console on mobile unit Extraction hose included Condition: Used Dismantled

Condition: used, Year of construction: 2009, functionality: fully functional, Offered is a turning and milling machine EMAG VLC 800 MT with tool changer. The machine has a turret with 12 tool positions (VDI 50) and a milling spindle with tool changer for up to 96 tools. The tool magazine can be loaded during processing, which reduces setup time and allows the use of sister tools. The proven EMAG turret is available for turning operations on the machine. On the multifunctional VLC 800 MT production center, workpieces up to 800 mm in diameter can be completely processed in a single clamping. Redpfew Au U Uex Adzecf The following components will be sold with the machine: - Pick-up station - Extraction unit (IFM) - Coolant system with belt filter - Chip conveyor CONTROL Siemens 840D MACHINE CONNECTION Mains voltage: 400V AC 50 Hz Connected load: 92kW Rated current: 143A Max. backup fuse: 160A The machine is sold on an “as seen” basis, without any warranty claims. The machine will be available from November 2025, machine is in production until Oktober. The machine can be completely overhauled on request. Please do not hesitate to contact us fot further information.

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Redpfx Adeq T I Izjzscf Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: used, Year of construction: 2010, operating hours: 62,569 h, functionality: fully functional, machine/vehicle number: 00410001121, spindle speed (max.): 5,000 rpm, overall weight: 5,695 kg, Equipment: documentation/manual, We are offering this used DMG CTX beta 500 V6 CNC turning and milling center, year of manufacture 2010. Serial number: 00410001121 Year of manufacture: 2010 Max. main spindle speed: 5000 rpm Rcedpszv Tbqsfx Adzef Max. counter spindle speed: 6000 rpm Weight: 5695 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, New 2013 Table size 1474 x 356 mm X axis 1016 mm Y Axis 596 mm Rcodpfx Ajyhdi Redzsf Z Axis 584 mm (Head Traverse) Spindle Speeds 40 – 5000 rpm & 40ISO 7.5 hp Spindle Drive. Max Table load 850 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rcedsw T Sn Eopfx Adzef Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Rodpfx Adox A Eupjzscf Tool presetting device Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

Condition: used, XYZ 2-OP Compact Vertical machining Centre Redpfxszu Ni Us Adzecf Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102193, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Rjdpey S Shwsfx Adzscf Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system

Condition: excellent (used), Year of construction: 2015, operating hours: 11,100 h, functionality: fully functional, machine/vehicle number: NTX1150102, Year 2015 with F31iB5 control and CELOS Country of manufacture: JP Voltage: 380V/50Hz/3ph Dimensions: 4169x2543x2543 mm Net machine weight: 10,000 kg TECHNICAL SPECIFICATIONS Control: Fanuc F31iB5 with CELOS Main spindle: X1 axis: 455 mm Y axis: +/- 105 mm Z1 axis: 800 mm (+165 for ATC) B axis: 240° Turret 2: Rjdpfx Adow T Snfszocf X2 axis: 160 mm Z2 axis: 730 mm Spindle 1 / Spindle 2: C axis: 360° / 360° Tailstock: A axis: 820 mm Max. distance between centres: 1,050 mm Max. turning diameter Main spindle: Ø 430 mm Turret 2: Ø 274 mm Max. turning length: 800 mm Bar diameter: Ø 52 mm . Ø 65 mm Unless otherwise specified or in case of errors or omissions, the technical data is provided without commitment.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm Rjdpfoyzf Naox Adzecf ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 63284-0012, turning length: 650 mm, turning diameter: 300 mm, spindle motor power: 15 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 680 mm, milling spindle length: 6,000 mm, type of input current: three-phase, bar passage: 65 mm, total height: 1,920 mm, total length: 3,130 mm, total width: 1,710 mm, spindle nose: A2-6, overall weight: 4,500 kg, Equipment: documentation/manual, MACHINE INFORMATION Manufacturer: Hyundai Model: KIA SKT2100SY Year: 2009 Condition: (Used) Great Serial Number: 63284-0012 Control: Fanuc Control Accessories: LNS Barfeed, Live & Static Tool holders, Swarf Conveyor, Parts Catcher, Tool Probe. Location: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control Bar Capacity: 65mm Chuck Size: 8″ Main, 6″ Sub Max Cutting Diameter: 300mm Max Cutting Length: 650mm Spindle Speed: 5000rpm Turret Positions: 12 Milling Speed: 6,000rpm Swing: 820mm X Axis Travel: 215mm Y Axis Travel: 110mm total (+55mm) Z Axis Travel: 680mm Rcjdpozwhp Ssfx Adzsf C Axis Travel: 0.001 degree

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 2,000 mm, Mazak CNC Mill – Turn Centre Model: E-650H Control: Mazatrol 640M Pro Year: 2004 Distance Between Centres: 2000mm Swing Over Bed: 905mm Machine With: C Axis Y Axis Live Tooling/Milling B Axis 800mm Power Chuck Manual Steady 375mm Open Steady 600mm Rcodpjzlhp Iefx Adzef Air Filer Mist

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl max. workpiece weight between centres 4000 kg total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Original purchase price in 2019: EUR 1.550.000,- Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Rcsdszuygdjpfx Adzof Turning, drilling, milling head Tool taper Capto C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more