Used Console Milling Machine for sale (84,517)

Condition: used, Year of construction: 1977, functionality: unexamined, Control type: conventional Axis travel: X: 1120 mm Y: 345 mm Z: 400 mm Vertical feeds: 5 - 250 mm/min Longitudinal and transverse feeds: 16 - 800 mm/min Table area: 400 x 1600 mm Speed range: 28 - 1400 rpm Tool holder: SK50 Total power requirement: 14.5 kW Machine weight approx.: 3.65 t Space requirement approx.: 2345 x 1950 x 2060 mm (LxWxH) Isdpfx Aewdivvog Dja External control cabinet with plug-in connections. Equipment: - 3-axis digital display - Pivoting control panel (suspended) The machine can be tested/demonstrated live on-site. All information is provided without guarantee. Subject to prior sale.

Condition: used, Univ. console milling machine REMA type X 6230 serial no. 98307 year of construction 1998 Travel X: 700 mm, Y: 250 mm, Z: 380 mm Table size 1100 x 300 mm Spindle holder ISO 40 Distance spindle nose - table max. 470 mm Pinol movement 55 mm Spindle speed Vertical 45-2000 rpm 12 steps Spindle speed horizontal 32-1600 rpm. 18 steps Feed speed X and Y axis 15 - 1200 mm/min. 18 steps Feed speed Z-axis 5 - 400 mm/min. 18 steps Rapid traverse X and Y-axis 2500 mm/min. Iodpsunc A Isfx Ag Dja Rapid traverse Z-axis 800 mm/min Vertical spindle drive 2.2 kW Horizontal spindle drive 4 kW Feed drive 1.1 kW Mains connection 400 Volt, 50 Hz - 3-axis digital readout SINO, type SDS 6-3V - Vertical milling head can be swiveled manually in two planes with drilling quill - Vertical milling head can be moved manually W-axis = 400 mm (4th axis) - Work table can be rotated +/- 45°, with 4 T-slots 14 mm, spacing 80 mm - Mechanical tool clamping via threaded spindle M16 - Manual central lubrication via hand pump - Coolant device in the machine base - recirculating ball screws - Horizontal milling shaft with counter bearing - Halogen machine light - Switch cabinet fixed to the machine Space requirement L x W x H 2000 x 1700 x 1800 mm Weight 2500 kg Very good condition

Year of construction: 1988, condition: good (used), CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Iedpfx Asbu Em Aeg Doa Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Various tool holders, Complete machine documentation. Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Machine can be run under current.

Condition: ready for operation (used), Travel X/Y/Z: 600mm/480mm/390mm, speed: 2550rpm, table dimensions X/Y: 900mm/500mm, max. table load: 360kg, feed rate: 600mm/min. Machine dimensions X/Y/Z: approx. 1650mm/1850mm/1900mm, weight: approx. 1900kg, digital display: Newall OP 700, documentation available. On-site inspection is possible. Isdpfx Agswn H Tys Doa

Condition: good (used), Year of construction: 1992, Travel : X-axis (longitudinal movement) 880 mm Y-axis (transverse movement) 300 mm Z-axis (vertical movement) 385 mm Clamping table : Clamping surface 315 x 1250 mm Table load 1000 kg Spindle head : Tool holder 50 SK Speed 28 - 1400 rpm Drive power 5.5 kW Feed : X-, Y-axis 16 - 800 mm/min Z-axis 5 - 250 mm/min Rapid traverse : X-Y-axis 3150 mm/min Z-axis 1000 mm/min Ijdotvfwcopfx Ag Dsa connected load : 8 kW Weight : 4.0 t Space requirement : L x W x H 2.3 x 2.0 x 2.6 m Accessories : * various tool holders * Operating instructions

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank Iedpoty A Ehofx Ag Dja - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Year of construction: 1994, condition: ready for operation (used), A Rackermann double-spindle milling machine (horizontal and vertical) is available. Travel X/Y/Z: 1000mm/370mm/450mm, table dimensions X/Y: 1300mm/400mm. Horizontal: Tool holder: SK40, max. tool diameter: 250mm, milling spindle swivel range: +/-90°, quill adjustment: 120mm, spindle diameter: 60mm, speed: 2100rpm. Vertical: Tool holder: SK40, max. tool diameter: 280mm, spindle diameter: 90mm, speed: 1400rpm. Feed X/Y/Z: 4m/min, feed force X/Y/Z: 10kN/10kN/30kN, rapid traverse X/Y/Z: 5m/min. Machine dimensions X/Y/Z: approx. 5500mm/4100mm/2500mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible. Ijdpsv Hrfmjfx Ag Dea

Condition: used, Universal milling machine, console milling machine SIMPLON type UN-S / Universa-Super Machine. No.: 17220 Year of construction 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm. 16 steps Feed X, Y, Z-axis 11 - 500 mm/min. Rapid traverse 2400 mm/min Motor power main spindle 4 KW Connected load 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Right and left rotation of the milling spindle - Vertical milling head swivels +/- 90 - Boom can be moved manually 700 mm from the milling head - Manually extendable lateral counter bearing holder with dovetail guide 450 mm - Mechanical tool clamping with M16 tightening screw - Coolant device in the machine base Iodpfx Agoifu Ars Dsa - Electrical control cabinet on the machine Space requirement L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), Iodpfxjxftqdj Ag Doa quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Iedpfx Aexxb Rrsg Dsa Jet Machinery Stock No: #79003 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10.500 mm Verlengd bereik van de robotarm (links en rechts): 3045 mm maximale werkstuklengte indien het een profiel betreft: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10.500 x 3045 mm max. werkstukhoogte: 3500 mm 13-positie gereedschapswisselaar: - 12 elektrische gereedschappen - 1 meetsonde Freeskop: -SK40 - 10 kW op spindel 12.000 tpm / 15.000 tpm - 7,5 kW op spindel / 18 000 tpm - 4 kW op spindel / 24.000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit wijzigen naar één werkgebied (voor een groot werkstuk) of het opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken. Iodpfx Agsv Sfk Hj Dsa

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 787 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, workpiece weight (max.): 600 kg, The machine is in good technical condition, connected to power and can be tested. Iedpfjxxtmfsx Ag Dja

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Isdswtnxnopfx Ag Doa Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Iedexvx U Aspfx Ag Dea Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 16,722 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,200 rpm, controller model: Heidenhain iTNC 530, Submission of a bid obligates the buyer to collect the machine by the end of this year! TECHNICAL DETAILS Travel X: 4,000 mm Travel Y: 1,200 mm Travel Z: 1,000 mm Maximum spindle speed: 4,200 rpm Tool holder: SK50 DIN 69871 Table load capacity: 10,000 kg Iodpjxx Uaysfx Ag Dsa MACHINE DETAILS Control system: Heidenhain iTNC 530 Operating hours Control unit on-time: 47,181 h Machine on-time: 45,697 h Program running time: 16,722 h EQUIPMENT 45° diagonal milling head with 2.5° indexing Drum-type tool changer with 24 tool positions (vertical tool change) Machine enclosure: front guard with 2 doors Rear guard with additional door Side slats for machining of extra-long workpieces Longitudinal chip conveyor (discharge on right-hand side) Control cabinet air conditioning Swivel arm for machine control (operation from front and rear)

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, Ijdpfx Aevz A Rijg Dsa 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: excellent (used), Year of construction: 2018, Clausing Colchester 4VSQ MLLPWR CNC Turret Milling Machine Acu-rite Mill Power 3 Axis CNC Control Table Size 1370 x 254mm Travels: X – 1050mm Y – 390mm Z (Quill) – 115mm Z (Knee) – 355mm Vari Speed Head Spindle Taper IS040 Spindle Speeds Low 60 – 500rpm Spindle Speeds High 55 – 4300rpm Weight: 1850Kgs 3 Phase Electrics Manufactured: 2018 Complete with: Vice Interlocking Table Guards Air Draw Bar Tooling Packaged (ISO40) Power Rise and Fall to Knee Auto Lube Worklight Coolant & Swarf Guards / Tray *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79028 Machine Serial Number: TC0015 Cost: £12,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Iodpfx Aex Af I Aog Dea Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Mecof Bed Milling Machine, Moving Column, 9m x 2.2m Table, Angle plate 1m x 2.5 x 1.2, two sub tables 1m x 1.5m. Heidenhain 426 control Isdoxaz E Sspfx Ag Doa

Condition: used, Year of construction: 2023, AJAX AJPR350 CNC Milling Machine Table Size 600mm x 163mm, X Axis Travel 350mm, Y Axis Travel 160mm, Z Axis Travel 400mm, Rapid Traverse 5m/min, Main Motor Power 3kw, Tool Changer 12 Tools, Max Table Load 50kg, Machine Weight 900kg, CNC Control Siemens 808D, Motor Type AC Servo, Spindle Taper BT30, Spindle Speed 18,000rpm, Machine Working Hours – 200 hours. S/No. 41840 (2023) Location: These lots are located in Newcastle upon Tyne, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Isdpfsxzfvwex Ag Doa

Condition: good (used), BOHNER & KOHLE 'BOKO F63.100' 6-AXIS UNIVERSAL VERTICAL MILLING & BORING MACHINE WITH NUTECH MACHINE SERVICES CONTROL UKUK X' Axis: Approx 2,400mm; 'Y' Axis: Approx 1,200mm; 'Z' Axis: Approx 1,300mm; 'W' Axis: Approx 300mm; 'C' Axis: Full Rotation x 'B' Axis +/- 90°; Table Dimensions Approx 1,800mm x 1,200mm; Max Table Load Approx 7,500kg; ISO 50 Taper; Spindle Head Swivel Left & Right; Spindle Speeds Approx 22-3150 RPM; Max Workpiece Height Approx 1,000mm; Rotating Work Table. Isdpfxsxyp Twe Ag Dja

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Iedpfx Agsw Rn Eue Dsa Tom Chandley Ltd – Electric 3-Deck Oven ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Serial No: 3669 ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Serial No: 8293 ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Serial No: KM 765 ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC-frees- en boormachine / CNC-vloerboor- en freesmachine Isdpfxsxpgf No Ag Dsa ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht - hydrostatische tafel - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm 3 T-sleuftafels - 7600 x 2800 mm - 7600 x 2480 mm - 4300 x 1800 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Handwheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79001 Ijdpoxxbzwefx Ag Dja Serial No: VKC064 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, CME Universal miller model FU31CM, 1860 x 360mm table, (plus two covers at 300mm each) approx 500mm under tool, knuckle head, with horizontal attachment, , DRO Sony 4 axes ACURITE READOUT & SCALES.. 40 INT spindle. Machine in exceptional condition ex University. Ijdpfx Agjxp Iqme Dsa

Condition: excellent (used), Adcock & Shipley 2E Universal Milling Machine Horizontal Milling attachements fitted Universal Swivel Table Table size 40 x 10” Ijdpfx Ajxxbhwjg Doa Speeds 30 – 1200rpm Power Feed to Table & Rapids Coolant Gaurds 3 Phase Electrics For sale with Jet Machinery Ltd Jet Machinery Stock No: #78947 Machine Serial Number: 1586K2AGU0665 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.