Universal tool milling machine, universal milling machine, drilling-milling machine

DECKEL FP 1

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages Fgjdpfxezinzxs Ambsd - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm - Fixed tilting table 600 x 210 mm - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Table size: AT-F 205 x 345 mm Fgjdpfx Asbx Eliembod Space required: 1070 x 650 x 1180 mm Drive motor: 500 V (with 380 V, 1/3 power loss), accordingly 0.6 kW

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Fodpeziny Iefx Ambjgd Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage Fjdezikrajpfx Ambjgd * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Year of manufacture: 1990 – workshop tested Machine No.: 1479 Geometrical inspection with test protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Fgsdpfx Aex Ada Rembsd draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine conforms technically to the state of the art at the year of manufacture.

Condition: used, x-travel 300 mm y-travel 160 mm z-travel 330 mm Fedpfxoy Sbkbo Ambsgd table surface area 600 x 200 mm table load capacity 200 kg Spindle Speed 40-2.000 U/min. tool taper SK40 dimensions 1200 x 1160 x 1800 mm machine weight ab. 800 kg

Condition: used, functionality: fully functional, Travel range X: 300 mm Travel range Y: 150 mm Travel range Z: 340 mm Spindle speed: 40 – 2000 rpm Feed rate in X & Z Tool holder: SK 40 with S 20 x 2 saw-tooth thread Table type: Angular table or swivel table Table clamping surface: 600 x 210 mm Weight: 800 kg Dimensions: approx. 1250 x 1200 x 1850 mm Paint finish: RAL6011, Reseda green Digital display: 3-axis digital display HEIDENHAIN Accessories: Additional accessories available upon request Fgjdpszi Utbsfx Ambjd

Condition: used, CNC cycle-controlled turning machine HARRISON, Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture 1998 Center distance 1250 mm Turning diameter over bed 400 mm Center height 200 mm Turning diameter over cross slide 245 mm Diameter in the crotch 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill taper MK 5 Spindle bore 54 mm Spindle head size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Stage 1) 15-275 rpm Spindle speed range (Stage 2) 35-795 rpm Spindle speed range (Stage 3) 110-2500 rpm Feed rate X and Z 0.03 - 0.6 mm/rev Rapid traverse rate X-axis max. 2000 mm/min Rapid traverse rate Z-axis max. 4000 mm/min Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Power connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC - Language in French (France) - Automatic gear range selection in 3 stages (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with different gear ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set of soft jaws - Quick-change tool holder MULTIFIX Size B with 2 inserts - 1 live center - 1 quick-change drill chuck RÖHM, 3-16 mm Fjdpoh Hvk Aefx Ambsgd - Folding chuck guard - Folding work area safety doors - Chip tray with coolant system under the machine bed - Control cabinet fixed to the machine - RS 232 interface Space requirement L x W x H 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fgodpfx Amsw Agxrebjd Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: good (used), Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1,20x1,10x1,60 m Fedpfx Amjzfql Sjbjgd Comes from a vocational school - Powered feed in X, Y, and Z axes - Coolant system - Machine vice - Work light

Condition: used, Year of construction: 2012, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Colour: Grey Weight: 1.500 kg Price: On request - Year: 2012 - Documentation available: No - CE marking present: Yes Fgjdpfx Amjyna Ezsbjd - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Fgodpfx Amoq A Icqjbed

Condition: good (used), Year of construction: 1985, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 3 active axes, rigid table, SK 40 M16 spindle taper. Central lubrication, operating manuals included. Good operational condition, comes from a vocational training center. Can be demonstrated under power by arrangement. Fgedsxwunzspfx Ambsd

Condition: reconditioned (used), Year of construction: 1990, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Aktiv Year of manufacture: 1990 – workshop-inspected Machine no.: 2102-5866 Milling head type: 2171 Milling head no.: 4613 Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X, Y, and Z axes - Universal table 590 x 250 mm (T-slot: 12 mm) - Vertical milling head SK 40 with pull stud thread S 20 x 2 - Without coolant system; can be retrofitted if required - Centralized lubrication, electric - Operating manual Used as seen, sold without warranty The machine is technically in the condition of its year of manufacture. Fjdpfx Aex S Edljmbsgd

Condition: good (used), functionality: fully functional, Internal article number: 26065 Universal milling machine Fodjzfh Idjpfx Ambogd Deckel FP1 Machine no.: 2101-0315 + 2-axis digital display + Stepped feed The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.