Used Milling And Boring Machine for sale (68,883)

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Pgjdpsvvx Hiofx Ad Njg Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Psdpfx Adexgu R Io Nsgg Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. Pedpfoxwdygjx Ad Nsgg However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm Pgodpfxjuddims Ad Neg With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Pjdsxgic Eopfx Ad Nsgg Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm z-travel // mm Pgsdpfx Ajig A Erjd Neg total power requirement / kW weight of the machine ca. 950 KG

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm Psdpfx Adjud Ille Njgg z-travel / mm Control TNC 355C

Condition: used, Year of construction: 1994, x-travel / mm y-travel / mm z-travel / mm Psdpjv T Nthjfx Ad Negg total power requirement 2,3 kW

Condition: used, Year of construction: 2000, x-travel 700 mm y-travel 450 mm z-travel 500 mm Control Phillips 432 diameter Drehtisch 600 mm total power requirement 40 kW Pjdsx U A Sxepfx Ad Nogg

Condition: used, Year of construction: 1989, x-travel 650 mm Pjdpfxex U A Rns Ad Negg y-travel 410 mm z-travel 450 mm travel x vor 1000 mm control mc4va

Condition: used, Year of construction: 2009, Weight 10 kg Year ca. 2009 Pjdpex U A Nqofx Ad Nsgg x

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Metba MB1 with 3-Axis Digital Readout Psdpfjydc Spex Ad Nogg Technical Specifications: >> Year of manufacture: approx. 1980 >> 3-axis digital readout (Mitutoyo) >> Fixed angle table >> Spindle speed: 45 - 2050 rpm >> Feed on 2 axes: 11-490 mm/min >> Travel (X/Y/Z): 300/150/340 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill extendable – SK-40 >> Drawbar system S20x2 >> Weight: approx. 700 kg Accessories and Features: >> 3-axis digital readout (Mitutoyo) >> Coolant system >> Various tool holders >> Operating manual About the Machine: For sale is a Metba MB1 universal milling machine in very good condition. The Metba operates smoothly even at high spindle speeds. There is minimal backlash and all spindles move easily. The MB1 comes from private ownership and has seen very little use. Mechanically and electrically tested. The digital readout enables easier and more precise work. You are welcome to inspect and test the machine under power on site.

Condition: used, Year of construction: 1990, table: 900-1500 mm digital ja weight 5 t Pgedpfx Ajx E Dt Eed Nsg

Condition: good (used), Year of construction: 2004, weight max. 1,5 t weight of the machine ca. 400 kg Pgodpfxexylq Sj Ad Nsg Accessories for a 4th axis machining center used on a HEDELIUS machine

Condition: used, Year of construction: 2007, 106 369-11 bore diameter 3 - 65 mm number of spindles 1 total power requirement 45 kW . Siemens control Simens Sinumerik . Pedowizn Ujpfx Ad Nogg weight 45 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1999, x-travel 4500 mm y-travel 2000 mm z-travel 1200 mm spindle taper ISO 50 Psdjwhqyqjpfx Ad Negg Cube 2 weight of the machine ca. 20.000 t

Condition: used, Year of construction: 1990, Weight . kg Psdpfx Adjud Tr Rj Nsgg Year . content Rubintastkopf cbm

Condition: used, make PEISLER JA Pgodpshy T Nrefx Ad Nsg . siehe bitte Fotos amount 2 im Paket documentation eine ist vorhanden +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, x-travel 1500 mm y-travel 1000 mm Pedpfx Adoikn S Te Nogg z-travel 700 mm table: 1500 x 1000 mm control FIDIA weight of the machine ca. 11 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Portal Machining Center – Universal – 5-axis machining Brand: AXA / Type: VPC-40-U / Year of construction: 2003 Description: Compact gantry design with overhead guides,automatic 1-axis swivel head and integrated NC rotary table for 5-sided machining. Condition: Ready for use / operational Operating hours (switch-on time): approx. 63.400 h TECHNICAL DATA Machining paths: - X-path (longitudinal movement): 2.300 mm vertical / 2.000 mm horizontal - Y-path (cross movement): 1.200 mm - Z-path (vertical movement): 600 mm - Distance between table and spindle nose: Zmin vert./hori. 110/160 mm - Rotary table – spindle nose: Zmin vert./hori. 110/160 mm Working table: - Table clamping surface: 1.100 x 1.100 mm - Table load: 1,5 tons Feed rates: - Max. Feed force: 9.000 N - Rapid traverse in X/Y/Z: 20/20/20 m/min Main drive / Spindle head: - Main drive AC – Hollow shaft motor 40 % ED: 30 kW Pgsdpfjydq Hhex Ad Njg - Speed range, continuously variable: 30 – 10.000 rpm - Tool holder: SK 40, DIN 69871A / 69872A Tool changer (chain magazine) - Tool stations: 36 positions Working spindle: 1-axis swivel head with 1° pitch Hirth spline instead of the standard 2.5° pitch. NC - Horizontal rotary table integrated into the machine table: - Rectangular face plate 1.100 x 1.100 mm EQUIPMENT / ACCESSORIES: - CNC-Control: Heidenhain iTNC 530 - Table height increase: fixed table by 150 mm. This means that the top edge of the fixed table and the rotary table are at the same height. - Coolant through the spindle - Chip conveyor (hinged belt) - Integrated 200 l coolant tank with pump for external cooling - Full machine enclosure - Extraction unit for extraction on both sides with work area enclosure - Manual spray guns - Electric hand wheel - Tool probe system TT 130, brand: Heidenhain There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm Pedpfx Ajx U A Iajd Nsgg x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1997, Control Heidenhain 355 x-travel 850 mm y-travel 550 mm z-travel 450 mm tool taper SK50 weight of the machine ca. 5,5 t +++++ Pgjdpfx Adod N Smhs Njg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, The UWF 6, a leading model from the Conventional Vertical Milling Machines category and part of the Universal Milling Machines group, exemplifies KNUTH's commitment to precision engineering. This robust universal milling machine boasts a rigid HT-200 cast-iron construction, providing a solid base for precision work. It features a large milling table with a 1,300 mm travel on the X-axis, allowing for efficient handling of substantial workpieces. The machine is equipped with a universal cutter head that swivels on two planes and a horizontal spindle with its own drive, enhancing versatility. Its innovative design minimizes downtime through rapid positioning and feeds, ensuring increased productivity. With a user-friendly control panel and extensive standard equipment—including a coolant system and chip tray—this milling machine is engineered for both ease of operation and maintenance. For greater capacity and accuracy in your machining tasks, request a quote for the UWF 6 today, and experience the advanced capabilities of our Universal Milling Machines. Pjdpfx Aou E Nwbjd Nogg

Condition: new, The FPK 6.3 is a highly versatile Conventional Vertical Milling Machine, ideal for Toolroom Milling Machines, and an essential addition to any mechanical production environment focused on tool and mold making. This compact yet robust machine features a premium cast-iron column for maximum dynamic rigidity and constant precision. Operators will appreciate the ergonomically arranged controls, swivelling control panel, and digital position indicator, which enhance usability. With precise preloaded ball screws on all axes, an automatic feed system with rapid feed, and an infinitely variable main spindle drive, it ensures efficient operation and precision. The large work table and generous travel dimensions further support its versatile applications. Included with the FPK 6.3 is an extensive accessory package alongside standard equipment such as electronic hand-wheels and a central lubrication system. Experience the robust performance of KNUTH's FPK 6.3 and consider ordering online to elevate your milling capabilities today. Pedpfx Ajqhkm Sed Njgg

Condition: good (used), Year of construction: 1977, workpiece weight 279 KG length ca. von Bett bis Lynette mm 189 € . max durchlass 369 mm Pgjdpfx Asrfd U Rod Njg