Hot Melt Glue Pump & Hoses

ITW Dynatec N05 - P12 24

Year of construction: 2000, condition: good (used), Barberan laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. the line includes - automatic loading of Tommassini (out of order) - brushing machine up and down - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps - a line of steel calenders for pressing Iisdjilqvropfx Amieb - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Heating power of the press 72kW Iijdporqzgkjfx Amijb Maximum capacity of the press up to 2000 m2 / 7.5h Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821

Condition: good (used), Year of construction: 2004, Peripheral devices MArke: Tool - Temp Type : TT - 157E Iiodpfjh Hbpwox Amijb Available 14x pieces

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Voltage: 400 V Frequency: 50 Hz Weight: 3200 kg Number of axles: 3 Iiodpfxstr A Evs Amisb

Condition: ready for operation (used), Used stainless steel reactor with double jacket and insulation item number: 10255 Final use: Chemicals Volume: approx. 7000L Working pressure: +6/-1 Bar Operating pressure double jacket: +12Bar Operating temperature: Max. 200°C Type: Standing on feet with claws Material (wetted parts): 1.4301 / AISI304 Design: Double jacket and insulated Underbody: dished boiler end Top plate: dished end with flange ring Operating pressure according to type plate: ATM Tank dimensions: Container inner diameter: 1790mm cyl. height: 950mm Total height: Ca 1860mm height of the feet: 670mm materials: Interior: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 / steel painted facilities: Iijdpfx Aod Dwkwemisb Top panel completely removable, flanged Insulation Double jacket around cylinder and underbody Various connections on the top panel Manhole cover on the top floor

Condition: excellent (used), SCM Machining center Isdpfx Amowmxkuoisib

Condition: good (used), Year of construction: 1993, Hymmen laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm line speed - 21 mb / min constant (during modernization of drives for smooth speed regulation) the line includes - manual loading and unloading - brushing machine up and down Iodpjilqwaofx Amieib - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps - a line of steel calenders for pressing

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Iiedpfxekn Rz Hj Amijb Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Iiedpfxsvvi Iqj Amieb Storage location: Garbsen

Condition: good (used), Year of construction: 2010, machine/vehicle number: AA2/001307, functionality: fully functional, operating hours: 25,000 h, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 6,500 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 180 mm, controller manufacturer: NUM, total height: 2,750 mm, total length: 8,000 mm, total width: 4,000 mm, table length: 6,500 mm, table width: 1,350 mm, controller model: 1040, feed length X-axis: 6,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 45,000 m/min, feed rate Z-axis: 30,000 m/min, spindle motor power: 11 W, nominal power (apparent): 15 kVA, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 45,000 m/min, spindle speed (min.): 24,000 rpm, table height: 950 mm, Working travel of axes X-Y-Z: 6500 x 1350 x 250 mm Working area: 6500 x 1250 mm C-Axis = 640, B-Axis = 270 Iisdpow Au N Sefx Amisb PRISMA milling unit with 5 interpolating axes X, Y, Z, C, B Electric spindle 11 kW, 600–20,000 rpm Tool holder HSK63 Working table with TVN pads and vacuum cups Cross laser projector on working table TVN vacuum cup Pneumatic clamps Tool magazine for 24 tools Drilling unit Vacuum pump 5.5 kW, 250 m³/h CNC control NUM Operating system: Windows XP Xilog Plus Maestro Weight approx. 5,450 kg