Used Melting Furnace for sale (1,187)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, UNOX XECC-0513-EPR CHEFTOP MIND.Maps COMPACT PLUS | Electric convection-steam oven, 5x GN 1/1 Manufacturer: UNOX S.p.A. Model / Type: CHEFTOP MIND.Maps™ COMPACT PLUS XECC-0513-EPR Serial number: 2019E0037931 Year of manufacture: 2019 Power supply: 380–415 V 3N~ / 220–240 V 3~ / 50/60 Hz Power: 9.3 kW Overall / internal dimensions: 535 x 872 x 649 mm Chamber capacity: 5 trays / GN 1/1 racks (rack spacing: 67 mm) Kdedpfez Tdkpsx Akpou Net weight: 65 kg, gross weight: 80 kg Other parameters: Protection rating: IPX4 Water pressure: 150–600 kPa (1.5–6 bar) Certificates: CE, EAC, NSF The professional UNOX CHEFTOP MIND.Maps™ COMPACT PLUS electric convection-steam oven (model XECC-0513-EPR) is a technologically advanced piece of catering equipment, designed for kitchens, restaurants, catering services, and delicatessens, where maximizing space efficiency without compromising performance is crucial. The COMPACT series stands out with its width of only 535 mm while maintaining full compatibility with GN 1/1 gastronorm containers. The device is controlled via an intuitive touchscreen panel with MIND.Maps™ technology, which allows for precise design and storage of custom thermal processing cycles. The oven is equipped with advanced chamber climate control systems: STEAM.Maxi™ (steam generation and precise humidification), DRY.Maxi™ (forced and rapid moisture removal for crispness), and AIR.Maxi™ (multi-point air circulation with auto-reverse, ensuring perfectly even baking on all 5 levels). The PLUS version designation guarantees the highest level of intelligent performance, supported by algorithms for automatic adjustment of baking parameters (ADAPTIVE.Cooking™). It is an ideal choice for continuous operation in roasting, frying, steaming, regeneration, and baking of meat and bakery products.

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Kodpfelc Ewisx Akpsdu Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: Kdjdpfxec Tmyge Akpju • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2011, capacity / hour ca.: 6000 working direction: left-right Strom / Volt: 14 Technical data: working direction: left-right, rotative, clockwise capacity bph max.: 6000 labels: hot melt labels number of labelling stations: 1 number of bottle plates: 8 motor height adjustment: yes speed adjusment: frequence converter Kedpfsz Suupox Akpsdu

Condition: used, Year of construction: 2016, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Kodpfx Akeya H Uyepodu

Condition: used, Bosch Turbo Scara SR 800EC Articulated Arm Robot Manufacturer: Bosch Order No. 841551021 Serial No. 671840015 Maximum load at the gripper flange: 100 N Stroke of the 3rd axis: 480 mm Operating pressure: 4-8 bar Weight: 100 kg Swivel range: see diagram Mounted on an aluminum profile base frame. Item condition: used All robots were stored as backup machines at a large automotive supplier and are therefore in very good condition. In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, tool carts, tools, and forklifts are plentiful. Kdsdpfxjg A N Tws Akpeu A total of 24,000 m² of production space is being dismantled and sold. Please also see our other offers. Payment is due within 7 business days after purchase. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, TECHNICAL DETAILS - Belt width : 100 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] Kodpfx Akeu E U Tbopedu - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: ready for operation (used), Year of construction: 1986, screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. Kdodpezht H Refx Akpeu • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: used, Case hardening line CIEFFE Kdedpfx Ajxnkqgekpju Max. Charge dimensions (W x L x H): 580 x1000 x 550 mm Max. Charge weight: 450 kg gross consisting of: 2 Gas heated multipurpose chamber furnaces - Type: LLF-5-G / LLF-5-G A/R - Working temperature: 750° - 980°C - Quenching media: Nitrogen – Oil - Atmosphere: Methanol, Methane, Nitrogen 6 ÷ 8 m3 / h 2 Gas heated tempering furnaces - Type: FVF 5 - Working temperature: 80° - 750°C - Atmosphere: Air, Nitrogen + Methane 1 Washing machine Reys - Type: Master - Washing tank: 2000 lt - Rinsing tank: 950 lt - Washing pump: 7,5 kW – 700 lt/min - Rinsing pump: 4 kW – 700 lt/min 1 Uniloader Charging places Charging material (baskets and grids) Spare parts

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet Kodpoybtnvefx Akpodu - seal lid with hot melt glue - index to serialised printing - carton discharge

Condition: good (used), Code: 0480 Brand: CASADEI INDUSTRIA Model: K 60 PM - CE Standard Automatic edge bander with  upper hot-melt hybrid adhesive tank for EVA and polyurethane glue with trimming unit for panels, furniture, furnishings, kitchens, and various - Year 2024 - CE Standard Technical data: Min/max panel height 8–60 Edge thickness10 mm Min panel length 120 mm Min panel width 110 mm Panel feed speed 11 mt/min Panel support roller opening 500 mm Kedpfoz Ekv Isx Akpedu Configuration: Infeed trimming unit : 2 diamond cutters diameter 60 mm 64 mm height - PLC-controlled work cycle - Adjustable material removal from 0 to 2 mm with digital display - HF motors, 200 Hz - 12000 rpm - 1,1 Kw each PLC-controlled logic operation - Full machine control - Electronic glue heating control - Automatic temperature standby Infrared lamp for preheating the panel after pre-milling Anti-adhesive liquid spray unit Glue tank - Tank capacity 2 kg - n° 7 electric heating elements Pressure rollers with digital position indicator Automatic edge feed Pneumatic shear for cutting rolls up to 3 mm Automatic front and rear trimming unit - Motor 0,27 Kw - 12000 rpm Tiltable trimming unit with Z4 cutters - Motor power 0,50 Kw - 12000 rpm Edge scraper unit: Widia blades - Digital displays Glue scraper unit: adjustable adhesive removal with Widia blades Brush unit - Motors 0,13 Kw - 3000 rpm - Brush diameter 120 mm Soundproof protective cabin Operating air pressure 6,5 bar Suction connection ports: n° 1 diameter 120 mm - n° 2 diameter 80 mm Overall dimensions mm 3200 x 1000 x 1450 h Weight kg 780

Condition: used, Year of construction: 2015, Overview This Atlanta Giotto is a single-lane wrap-around case packer for end-of-line carton packaging of PET bottles, rated at more than 20 cartons per minute. It erects the wrap-around case around the bottle group from a flat blank held in an inclined magazine, and closes it with a hot-melt glue unit. Neutral and printed carton both run on the machine. The machine was built in 2015 and ran on a mineral water bottling line until early 2025, packing 1.5 l PET bottles in 4 x 3 cartons and 1.0 l PET bottles in 5 x 3 cartons. It was operated alternately with a shrink-film bundling process, so its operating hours are low. Control is a Siemens S7 PLC with a touchscreen HMI panel. Infeed and outfeed conveyors, motorisation and the CE control panel are part of the machine. Technical data - Manufacturer: Atlanta - Model: Giotto - Year of manufacture: 2015 - Machine type: single-lane wrap-around case packer - Capacity: more than 20 cartons/minute - Infeed: single lane, inclined carton magazine - Carton formats: 80 x H262 mm for 1.5 l PET bottles, 87.5 x H322 mm for 1.0 l PET bottles - Pack patterns: 4 x 3 bottles in 1.5 l PET, 5 x 3 bottles in 1.0 l PET - Carton: neutral or printed - Case closing: hot-melt glue unit - Control: Siemens S7 PLC with touchscreen HMI panel - Length: approx. 7,175 mm machine body, plus 1,300 mm infeed conveyor - Width: approx. 2,345 mm - Height: approx. 2,336 mm - Infeed height: min. 1,050 mm - Weight: approx. 800 kg magazine section, approx. 2,250 kg packer body - Power supply: 25 kW - Compressed air: approx. 400 Nl/min at 6 bar - Infeed belt: acetal, 685 mm wide Equipment - Infeed and outfeed conveyors Kdodpfx Aszxtyrskpju - Inclined carton magazine - Hot-melt glue unit - Motorisation and CE control panel - Siemens S7 control with touchscreen panel - Electrical and mechanical drawings - Service and maintenance manuals - Spare parts books Condition Used, in very good condition with a low number of operating hours. The machine was in production until early 2025 and has since been dismantled and moved into storage. It can be inspected dismantled in the warehouse by appointment. Availability Immediately available. Location: Italy. Lifting, craning, loading and transport are available on request and are not included.

Condition: used, power: 10 kW (13.60 HP), input voltage: 230 V, total length: 1,150 mm, total width: 800 mm, total height: 670 mm, overall weight: 85 kg, fuel type: electric, - Dimensions (L x W x H): 800x1150x670mm - Brand: Bake OFF ITALIANA - Serial number: 01980063 - Model: MISTRAL 5T - Temperature: 270°C - Baking trays: 400x800, 400x600 - Tray spacing: 90 mm - Power: 10 kW - Voltage: 230V - Weight: 85 kg Features of the 5-tray electric convection oven Bake Off Mistral 5T - BakeAIR multi-fan system for uniform heat distribution. - Double-pane, low-emissivity glass for superior insulation. - LED interior lighting for perfect visibility. - High-performance thermal insulation for maximum energy efficiency. Kdjdpfxszyulxo Akpeu - BakeCLEAN automatic washing system for easy maintenance. - Blue LED lighting to check the cleanliness of the baking chamber. - Five fan speeds and semi-static baking for precise results. - Five baking methods for exceptional versatility. - Automatic opening of the BakeDRY flue for precise control. - Program block with password for increased security. - Baking chamber with rounded corners for simplified cleaning. - CE certification for compliance with European standards. - Automatic dry/steam control in the chamber for perfect dishes. - Automatic control of the baking level and batch loading. - Steam control in percentage with BakeSTEAM. - Multi-timer function for multiple and mixed baking cycles without worry. - Storage, display, and export of baking data (HACCP). - Operating modes with customized, manual, or pre-defined programs. - EAC certification for compliance with Eurasian standards. - Modular design for optimal adaptability. - Automatic preheating for quick baking. - Delayed start programming for flexible time management. - Delayed baking programming for increased convenience. - Pre-loaded cookbook available online for culinary inspiration. - Automatic detection and error reporting for peace of mind. - Safety rinse for worry-free maintenance. - Stackable design to save space. - Ventilation with reversing, speed control, and motor brake for optimal performance. - Inner glass that can be opened for easy cleaning.

Condition: used, -Dimensions: 1500x2350x2250 mm -Overall depth with loading platform: 4595 mm -Baking area: 6.4 m² -Number of decks: 4 -Number of doors per deck: 1 -Serial number: G259 -Manual tactile control panel -Integrated loading platform elevator -Year: 2024 -Power: 29 kW -Voltage: 400 V -This oven has been in operation for one year -Facade, hood, table, and control panel made of stainless steel -Hood with steam extraction system -Independent and adjustable heating -Double halogen lighting on each deck -8 mm tempered glass doors Kedpfxjzyk Rwj Akpodu -20 mm refractory tiles made of cement -Stainless steel/aluminum door handles -Usable opening of 180 mm on the lower decks -Usable opening of 230 mm on the upper deck -Integrated facade elevator available as an option -Tactile control panel with up to 99 programs, depending on the equipment

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 Kdjdpfx Akoz A Sxlopou 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 33,793 h, clamping force: 4,000 kN, screw diameter: 80 mm, overall weight: 31,000 kg, product length (max.): 10,259 mm, Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details. • Injection unit: 3550 • L/D ratio: 25 • Control unit: ENGEL CC300 (21.5" Full HD touchscreen) • Drive system: ECODRIVE SHV3-HSI, 2 pump systems, accumulator Kodpfxjz Dgpbe Akpedu • Electrical connection: 3 x 400 V + N + PE, 50 Hz • Nominal connected load: approx. 282 kW • Clamping system: Tiebarless, fully hydraulic ENGEL clamping system • Centering: 160 mm • Ejector stroke: 250 mm • Hydraulic core pulls: 2 on moving platen, 2 on stationary platen • Vacuum/compressed air circuits: 4 on moving platen with Venturi nozzle and pressure switch • Pneumatic valve: 2/2-way valve R 1/4" on stationary platen • Pneumatic mold valve control: 4-fold FESTO, up to 16 bar • Mold heating: 32 control zones, max heating power 43 kW • Screw drive: Electromotoric, speed-controlled, max 150 rpm, rated power 47 kW, torque 3700 Nm • Nozzle radius: 15 mm • Nozzle bore: 6 mm • Nozzle contact force: approx. 150 kN • Metering stroke: 390 mm • MuCell equipment: MuCell Advanced Package; cylinder L/D 24/25; MuCell G25 screw Ø 80 mm; gas injector bore; melt pressure sensor; RS-485 interface to SCF gas plant; emergency stop connection • Mold temperature control: 3 ENGEL flomo distributors with 8 zones each (24 monitored circuits total) • Hydraulic tank capacity: Main tank approx. 690 l; suction tank approx. 290 l • Robot interface: Euromap 67 / AN-146 • Languages: Czech and German Additional equipment • Including GEKU robot

Condition: used, Year of construction: 2013, Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data - Manufacturer: KOSME - Model: FLEXA 15/720 P3 MM - Year of manufacture: 2013 - Machine type: rotary labeller, wet glue and hot melt - Labelling stations: 2 x wet glue, 1 x hot melt - Label feed: magazines for pre-cut labels - Formats set up: 4, covering 400-450 g/ml containers - Output: up to 15,000 bottles per hour - Dimensions (L x W): approx. 3,800 x 3,000 mm - Operating hours: 33,275 h (HMI counter) - Containers processed: approx. 302.5 million (HMI counter) Equipment - Infeed and outfeed starwheels - Container plates and top centring bells - Brush units and side pressing belts in the outfeed Kdsdpoz Et Uyefx Akpju - Transparent safety doors and panels - KOSME touch panel with production statistics Condition Used, with normal signs of wear and glue residue from production. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.

Condition: used, Year of construction: 2006, capacity / hour ca.: 12000 working direction: right-left (CCW) Kdodpjz R Dnijfx Akpou Strom / Volt: 400 Technical data: working direction: right-left, rotative, counter clockwise capacity bph max.: 12000 labels: hot melt labels number of labelling stations: 1 number of bottle plates: 12 bottle diamater max (mm): 120 bottle diamater min (mm): 60 bottle height max (mm): 350 bottle height min (mm): 200 motor height adjustment: yes speed adjusment: frequence converter

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, 1 FOUR-TUNNEL DRYING / DEBURRING / COOLING SYSTEM Brand: SAT - Automatic conveyor for trays holding your parts o Tray dimensions: L = 475, W = 325, H = 210 o Payload: 80 kg o Maximum temperature: 150 °C o Electric heating o Ventilation o Heating length: 2620 mm (width 550, height 300) o Dwell time: 1 hour (adjustable) o Inlet and outlet airlocks on the oven A Kdodpfxozkt Ugo Akpsu Attached: - Drawing - Description - Photos (more available upon request) Inspection possible in working condition in Northern Switzerland, near Lausanne.

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements Kdodpfx Aoz Smtrekpeu 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: used, Year of construction: 2022, Cartoner including hot melt applicator. This device has a low operating hour count. It is particularly suitable for products that can be fed into the carton from the side. Kdodevb E Evopfx Akpou

Condition: new, Year of construction: 2023, operating hours: 10 h, !! We would be happy to advise you!! Model name ////: Rotection cartoner Features ////: Double servo feed control, with hot melt station, safety enclosure and safety technology Production orientation ////: Horizontal Conveyor system ////: Fan conveyor belt Carton feed ////: top with active conveyor belt Operator display ////: Touchscreen Drives & control ////: 8 servo motors and PLC control Box length ////: 150-300 mm Box width ////: 120-260 mm Packaging height ////: 50-100 mm Speed ////: 40-60 boxes/min. depending on box size and product weight Recommended cardboard box ////: pre-folded boxes, 250-350g/m³ Kdodpfxsr E Dpaj Akpju Consumption ////: approx. 9.5KW Power supply ////: 380 V / 50 Hz/ 3-phase System weight ////: approx. 1000 kg System dimensions ////: approx. 4257 x 1605 x 1823 mm System material ////: "304 stainless steel with surface treatment" Hot melt station ////: Required, optional Nordson or Robatech

Condition: new, For sale: Professional power controller (thyristor-based) Advanced Energy Thyro-A series. The device is NEW – never used (warehouse stock). High-end industrial equipment designed for advanced production installations. 🔧 Technical specifications: Manufacturer: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Voltage: 400 V Current: 350 A Output: Relay Out 4A / 250V Type: thyristor power controller (SCR) ⚙️ Applications: Kedpfx Asz Sl Alskpjdu industrial furnaces heating systems industrial automation power control in production lines 📦 Included in the set: 3x Thyro-A modules industrial enclosure / heat sink cooling fan full set as shown in photos ✅ Condition: NEW – unused May show minimal signs of storage. Fully functional.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6618G03006, Year of construction: 2018, operating hours: 10,500 h, total length: 1,818 mm, total height: 2,185 mm, total width: 2,700 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 400 V, input current: 28 A, compressed air connection: 8 bar, input frequency: 50 Hz, laser power: 400 W, ambient temperature (min.): 18 °C, ambient temperature (max.): 25 °C, table width: 250 mm, table length: 250 mm, We offer this showroom Concept Laser M2 metal 3d printer - Laser Powder Bed Fusion system (LPBF / SLM) + peripherals Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 400 W singlelaser, 3D optics (variable focus) - ScanLab Intelliscan + VarioScan, internal water cooling and air conditioning of optical parts - Build envelope: 250 x 250 x 350 mm - Scanning speed: 4,5 m/s with variable focus - Focus diameter: 70 - 500 μm - Layer thickness: 20 - 80 μm - Connected loads: Max. power consumption 10 kW; Power supply 3/N/PE AC 400V, 32A connector; compressed air 6-10bar - Inert gas supply: 2 gas connection provided - Ar and N2 (machine was used with argon mostly) - Filtering system: integrated, with a 20 m2 filter surface - Dimensions 2695 x 1818 x 2185 mm (W x D x H) - Weight: approx. 2,500 kg - Operating conditions: 18 - 25°C - Holders for three different recoater blades types included - A few aluminum and steel build plates included Includes material parameters for: - 316L stainless steel (1.4404), Kdedpsz T Nc Dsfx Akpju - AlSi10Mg aluminium alloy, - M300 hot-work steel (1.2709), - TiAL6V4 titanium alloy, - 17-4 PH precipitation hardening steel - Parameters for other materials can be inquired from manufacturer Machine has been used with 316L and Aluminium only. Extra options (included): - IP camera for process monitoring with independent network connection. - Additional filter box for quick filter exchange. Age and condition: slightly used Machine installed at showroom in 2019 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days, some builds for students. Basically, not more than 20% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers safety service patches and updates until this date have been applied. Machine clock: 10.500 hours - not a "Laser ON time", that is expected significantly lower. Auxiliary equipment (included): - internal sieving device - to be mounted on top of dose chamber - external sieving station QM Powder - for independent inertized sieving process - Size: 1050 x 995 x 1600 mm - Weight: 350 kg - Power: 3 P/N/PE AC 400V, ±10%, 50Hz-60Hz - compatible with bottles and Concept Laser M2 powder containers - wet vacuum cleaner for powder materials Ruwac NA7-11 - electric lifting device with vibration generator for powder containers - filling machine and external powder sieving - stylish storage for 4 powder containers (some containers included with the machine) - Size: 1150 x 1220 x 870 mm (H x W x D) - Weight: 250 kg Original price: 550.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator: Parker N2 Midigas 6 (requires compressed air input) with 250L buffer tank - extra 1000L buffer tank for nitrogen generator for faster inertization + 4.000 Eur - Heat treatment furnace with gas chamber and trolley: Nabertherm N 41/H - Chamber: 350 x 500 x 250 mm (W x D x H) - External dimension: 840 x 1160 x 1320 mm (W x D x H) - Weight: 260 kg + 3.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: used, OTT Tornado - TOP Control system - via a 15-inch color touch monitor for full automation and maximum ease of operation. CM-CombiMelt gluing system – suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Joint processing unit for attaching chipboard. Automatic roll magazine. Kdedpfxez Ti Duo Akpsu Automatic edge magazine. Double-head unit with automatic pivoting 0° / 3°. Flush trimming unit – for flush trimming – 12mm. Fine milling unit RADIUS – for radius milling – profile cutter R2 – R5. Automated contour milling – for rounding corners. Pull knife unit – radius. Surface pull knife unit. Lubricant spray system – PU. Cleaning set with fine wiping device. Very stable workpiece support with roller conveyors – FRONT with scissor lift. Complete tool set included. Machine is in EXCELLENT CONDITION. Machine is from a lease return. First delivery in 2012. Available from stock in Lieboch.