Used Melting Furnace for sale (1,180)

Condition: ready for operation (used), W&P Rototherm Part - Used - Model REA 1020 - For sheets of 60 x 80 - 2 units available - May be missing some small parts - Used burners Iedpfxoz Tqv Se Akpotn - Without trolleys - Price: 3,000 € per set

Condition: ready for operation (used), Year of construction: 2012, This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, it's designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, it's ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine. Additional information • The machine is a co-rotating twin-screw extruder designed for high-performance compounding and processing of advanced polymer materials. It is specifically configured for the production of biodegradable polymers but can be adapted to various extrusion processes. The machine is new and has never been tested. • The machine represents a professional-grade extrusion solution for companies involved in bioplastics, masterbatch production, or specialty compounding.Machine Data • Screw center distance: 50.0 mm • Feed screw diameter: 55.0 – 61.9 mm • Screw diameter: 61.9 mm • Diameter of kneading discs and kneading blocks: 61.7 mm • Screw material: VSA2 • Barrel diameter: 62.3 H8 • Barrel material: VSA2 • Screw length: 48D • Mechanical screw torque: 2 × 1375 Nm • Drive type: Three-phase motor • Drive power: 121 kW • Max. motor speed: 1620 rpm Isdez Uf Uljpfx Akpotn • Gear ratio: i = 4.05 • Max. screw speed: 400 rpm • Power transmission: Safety coupling (shutdown torque 868 Nm) • Number of temperature-control zones: 11 • Heating power: 100.80 kW • Number of cooling zones: 11 • Cooling type: ZIK (intensive barrel cooling) • Feed zone cooling: Water • Max. melt pressure: 220 bar • Max. melt temperature: 350 °C • Injection height: 1050 mm • Sound power level: < 85 dB(A) • Approx. weight: Specified on machine frame

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit Itodezuyh Ujpfx Akpon 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design Itodpfx Aksx D Ewmspen • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power

Condition: used, Year of construction: 2014, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, working width: 3,200 mm, The machine has the following configuration: Number of machining units: 8 Pressure bar: With rubber belt Panel support stop: Present Overpressure: Present CNC positioning: Present Panel infeed trimming system: Present Number of units in the trimming area: 1 Number of units in the edge processing area: 6 Trimming unit Unit: Flush trimming unit Manufacturer/Model: RT30 Automatic time intervention: Present Motor power: 3.5 kW Speed: 9,000 RPM Edge banding Glue application system: EVA Heating lamps for edges: Present Edge magazine: Roller magazine Number of magazine positions: 6 Hot melt glue tank: Present Hot melt glue pre-melter: HM20 Pressure roller unit: Present Number of pressure rollers: 4 CNC positioning: Present End capping unit Manufacturer/Model: IT90-S Number of motors: 2 Maximum processing speed: 28 m/min Motor power: 0.65 kW Speed: 12,000 RPM Corner milling unit Manufacturer/Model: RF10 Number of motors: 2 Motor power: 1 kW Speed: 12,000 RPM Corner rounding unit Manufacturer/Model: AR30 Number of motors: 2 Automatic tool changer: Present Maximum processing speed: 18 m/min Motor power: 0.65 kW Speed: 12,000 RPM Edge scraping unit Manufacturer/Model: RB40 CNC positioning: Present Isdpfx Asz Ekh Dskpstn Glue scraping unit Manufacturer/Model: RC20 Brushing unit Manufacturer/Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Speed: 1,400 RPM TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Minimum panel width: 100 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Electrical connection power: 25 kW EQUIPMENT CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5062

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: Itedpfsx S Hmzex Akpsn - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: used, Year of construction: 1998, machine/vehicle number: 149280, Hardening furnace Order no. 26164 Itodpfx Akezg E I Dspen Technical data: - Nominal temperature / Continuous temperature, infinitely adjustable up to 1200 °C - Three-sided heating (bottom + sides) - Temperature control via NABERTHERM Controller C 30 - T. max. 120 min - Drive 400 V / 12 kW - Internal dimensions approx. W 350 x H 250 x D 540 mm - Usable volume 41 L - Space required approx. W 950 x H 1370 x D 1600 mm - Weight approx. 400 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, power: 110 kW (149.56 HP), input frequency: 50 Hz, type of input current: three-phase, temperature: 280 °C, total length: 2,062 mm, total width: 2,251 mm, total height: 2,492 mm, overall weight: 1,830 kg, control type: CNC control, actuation type: mechanical, fuel type: hybrid, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Rotary oven, gas or oil-fired, 800 x 1000 mm: Bongard MG series Gas or oil-fired, depending on configuration Heating power: 110 kW Gas connection: 3/4" galvanized pipe Trolley: 800 × 1000 mm Trolley: 780 × 980 mm Maximum load: 200 kg 180 to 216 baguettes (250 g each) 18 levels for baguettes 108 to 135 loaves (400 g each) 15 levels for loaves Stainless steel baking chamber Rotating tray Pulsed steam injection Maximum temperature: 280 °C Ijdpfx Akezrvm Iepjtn Power supply: 3N~400 V Electrical protection: 16 A Water pressure: 2.5 to 4 bar Water connection: 3/8" or 12/14 mm pipe Oil connection: 10/12 copper pipe Smoke exhaust: Ø 200 mm Opticom electronic control system as standard Dimensions: 2251 × 2062 × 2492 mm Depth with door open: 2774 mm Minimum door opening: 1020 mm Net weight: 1830 kg

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Iodpfxezuwyze Akpjtn Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2009, Overview This SMI TF350 is a tray packing machine for PET bottles, built in 2009 by SMI (Italy). It forms cardboard trays from flat blanks and packs PET bottles at an output of 45 to 50 packs per minute. Tray forming is carried out with an integrated Nordson ProBlue 4 hot-melt adhesive unit. The machine is fully enclosed by a safety guard with large viewing panels and hinged access doors, and is operated from a control cabinet mounted on the machine frame. It has been running as the tray packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data - Manufacturer: SMI (Italy) - Model: TF350 - Year of manufacture: 2009 Ijdszuw H Uepfx Akpetn - Machine type: tray packer for PET bottles - Output: 45 - 50 packs/min - Adhesive system: Nordson ProBlue 4 hot-melt unit - Packaging material: flat cardboard blanks - Guarding: full safety enclosure with viewing panels and access doors - Location: Germany Equipment - Nordson ProBlue 4 hot-melt adhesive melter - Magazine for flat cardboard blanks - Machine-mounted control cabinet - Full safety enclosure with viewing panels and hinged access doors Condition Very good, well-maintained condition. Extensive annual overhauls have been carried out by the manufacturer. The machine is still installed and under power and can be inspected in operation on site. Availability The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 7 and 10 October 2026 and can be carried out by the seller. The machine is located in Germany.

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Itedpfx Akozux R Ispon Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system Itsdszux T Aepfx Akpen - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Equipment: crane, Complete aluminium foundry for sale – machines, equipment, and supplies Due to the cessation of our business operations, we are offering our complete aluminium foundry for sale, including machines, equipment, and various supplies. This is an interesting opportunity for an existing foundry that wishes to expand its capacity, but also for an entrepreneur who wants to acquire a complete setup for aluminium casting in one go. The foundry is equipped for the production of aluminium castings and has the machines, equipment, and tools required for the complete casting process. The complete setup includes, among other things: Melting and casting equipment Equipment and supplies for sand casting Mould boxes and various casting tools Equipment for preparing and processing moulding sand Workbenches and other production equipment Various hand tools and supplies Stock of casting and consumable materials Various accessories specifically for aluminium casting Other machines and supplies from the foundry The foundry has been used professionally within our own production for many years. Due to the cessation of our business operations, the complete setup is now available. We prefer to sell the foundry as a complete unit. This makes it possible to take over an existing production facility with all its associated supplies in one go. Ijdpsz A Agtjfx Akpjtn The equipment and inventory can be viewed by appointment. If you are seriously interested, we can, of course, provide a complete overview of the machines, equipment, tools, and other supplies available. Price: upon request Are you interested in the complete foundry or would you like more information about the equipment available? Please feel free to contact us. Viewing is possible by appointment.

Condition: used, Year of construction: 2019, Loading rack oven, Miwe Econo EC 8.0604, double convection oven. Itsdpoz A Spwofx Akpsn Year of manufacture: 2019 Used, in working condition 2 baking chambers, each for 8 baking trays, 60x40 cm Each baking chamber can be programmed separately Without exhaust hood

Condition: used, Year of construction: 2012, Deck oven, electric, multi-tiered, WP Matador Store 6.4 Year of manufacture: 2012 Itedez A Stvspfx Akpjn Condition: functional Drive: Electric Navigo control system (touchscreen) 4 baking chambers, each with a baking area of 60x40 cm Exhaust hood, year of manufacture: 2016 Proofing cabinet for 10 baking sheets, 60x40 cm, year of manufacture: 2016 Includes operating manual.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MPC45.2, Stock No.: 2789 1 used, partially overhauled, and functionally tested compounding line Berstorff / Compex Type MPC 45, throughput up to approx. 150 kg/h, material-dependent. The system consists of: Co-rotating twin-screw extruder with barrier screw, segmented screw and cylinder Temperature control unit for cylinder / processing section (connection and water chiller on the customer side) Compex/Berstorff Type MPC 45, drive 34 kW Screws 2 x Ø 45 mm – 40 L/D with screw speed up to 450 rpm Isdpfxjz A S S Ss Akpetn 2x Side feeder extruder ZSB 34 (twin-screw) (e.g. for glass fiber feeding - formulations) 3x Degassing zone including vacuum pump Melt filter / screen changer, hydraulic (for processing ground material) Strand granulation, complete with: strand head / nozzle Strand cooling trough and strand granulator, e.g. A-SG 60 (NEW CONDITION), IPS 60E, Alphatec, Scheer, ... Control system: Siemens HMI screen, new in 2022 OPTIONAL: Gravimetric differential dosing system with control Price on request, depending on the design and number of dosing stations. Alternatively equipped with underwater granulation, stock no. 2758 MAAG Rieter Sphero 50, with separate control Start-up / training at your plant by our technician is possible, details on request. Test run / sampling / function test with your material mix can be carried out in the short term, details and date on request. Please send us your material data sheets in advance. Further compounding extruders / lines are available for demonstration at our Wuppertal plant.

Condition: repair required (used), Year of construction: 2008, machine/vehicle number: 10719G, functionality: limited functionality, The HEUFT K0 400 has already been professionally dismantled by HEUFT. All operating and hazardous materials have been completely pumped out, and the system has been prepared accordingly for further handling. The cost for the professional dismantling alone amounted to approximately €2,500. Furthermore, the system was regularly maintained up until the dismantling. Itedpfozz Iniox Akpon The burner included in the sale has been serviced and is in good condition. Model: WG40N/1-A ZM-LN. Serial No.: 583489708. The boiler itself has also been regularly maintained. The significant defect that we are aware of is the burnt-through boiler base. In addition, the control cabinet and boiler pump will not be included in the sale. The boiler is ready for immediate collection.

Condition: used, Year of construction: 2005, power: 37.6 kW (51.12 HP), input voltage: 6 V, temperature: 320 °C, inner dimension length: 120 mm, inner dimension width: 80 mm, inner dimension height: 17 mm, total length: 150 mm, total width: 135 mm, total height: 215 mm, overall weight: 550 kg, number of chambers: 4, fuel type: electric, Miwe Condo Co.4.1208 with extractor hood, baking chamber 120x80xHx17 cm, electric, power 37.6 kW, 400/230V. Iedpfx Asy N Tbgokpstn

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Ijdpfozb Dr Ssx Akpstn Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: used, Professional Bongard Dividier SP50L dough divider/rounder. Suitable for quickly and accurately dividing and rounding dough for rolls, buns, and pizza dough. Robust industrial design, easy to operate, and ideal for bakeries and catering production. Ensures consistent dough weights and high production capacity. The machine is in used condition. Itodpfezbrzujx Akpsn

Condition: excellent (used), Offer includes: Horizon BQ-470, efficient 4-clamp perfect binder, EVA/hot melt, year of manufacture 2019, counter reading: 430,000 books, ready for demonstration and immediately available. Isdszltf Ijpfx Akpotn

Condition: new, VORTEX Range Electrical power Maximum temperature 300 °C Electrical power 52 + 2.5 kW Heaters with front access Isdpfx Akozk Hb Tepotn Capacity: 18 trays Tray size: 60x80 cm Baking area: 8.6 m² Rotation diameter: 1020 mm External dimensions: 1700 x 1840 x 2700 mm Overall dimensions with door open: C 2350 mm Rotation by hook Suspended trolley Standard steam system with XL iron bars Front water outlet Rear outlet available upon request Manual steam release Stainless steel cladding Digital control panel with 99 programs Door opens to the right Double-glazed, full-view door Reinforced steam system with cast iron balls (optional) Programmable automatic steam release (optional) Drip-proof hood (optional) 600 kg rotating tray (optional) RC3 or MARCONI touchscreen (optional) Key advantages Electric rotating oven for trolley with 18 trays of 60 x 80 cm. Baking area of 8.6 m², suitable for regular professional batches. Electrical power of 52 + 2.5 kW. Maximum baking temperature of 300 °C. Rotation system by hook with suspended trolley. Digital control panel with 99 programs, multi-phase management, and programmable weekly start. Detailed technical specifications Reference: LFRNKE - 6080 Range: VORTEX Type of oven: Professional electric rotating oven Application: Baking bread, pastries, fresh or frozen dough Capacity: 18 trays Tray size: 60 x 80 cm Baking area: 8.6 m² Rotation diameter: 102 cm External dimensions: A 170 cm, B 154 + 30 cm, C 235 cm, H + H1 230 + 40 cm Maximum temperature: 300 °C Power: Electrical Heating system: Electric heaters with front access Electrical power: 52 + 2.5 kW Rotation system: By hook, suspended trolley Cladding: Entirely in stainless steel Baking chamber: Thick-gauge stainless steel with stainless steel base and trolley extraction slide Door: Opens to the right, double-glazed, full-view, classic LF handle Steaming system: Standard with XL iron bars Water outlet: Front, or rear upon request Steam release: Manual, programmable automatic option Control panel: Digital with 99 programs, multi-phase management, and weekly start programmer Optional controls: Electromechanical control panel or touchscreen End-of-baking safety: Flashing light and buzzer with digital or touchscreen control panel Delivery: Oven delivered unassembled or fully assembled (optional)

Condition: refurbished (used), functionality: fully functional, Equipment: documentation/manual, Hello, we are offering a Thieme TSC 130 squeegee cutting machine that has been completely overhauled in our workshop. It is suitable for a maximum squeegee length of 1300 mm. Itodpszyc T Rofx Akpsn In this system, the squeegee blade is trimmed thinly using a very fast-rotating special knife under a water/alcohol mixture. This is necessary if the squeegee blade has not been installed perfectly flat or if the edge of the squeegee blade is damaged and no longer prints cleanly. The advantage of cutting compared to squeegee grinding is: the rubber does not get hot and melt. You always get the same, defined edge, and virtually anyone can do it. The system is suitable for classic screen printing squeegee blades. It is not suitable for RKS squeegee blades or carbon squeegees. The system is currently located in our warehouse/workshop in 93476 Blaibach. We would be happy to take care of transport, etc. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2003, Ref:11135 . 2003 Hoerauf BDM ‘Universal’ Case Maker For short, medium and long runs with the shortest set-up time and the widest open case format. Suitable for 3-piece cases, game boards, padded cases for photo albums, pocket diaries, bible cases etc. Equipped for thin, soft flexible book cases with equipment for second pass case lining. Comprising; LCD Screen for menu guided set-up and fault display. Conveyor feed of pre-cut boards Triple reel feeder for soft spines with auto-splice Magazine feeder for stiff or hollow spines Shingle conveyor feed of pre-cut cloth Pre-melt tank Mobile hot-melt gluing unit and circulation pump Delivery with counter and roller table DC drive motor Complete with compressor, tools & accessories. Itsdpszq Ebrsfx Akpjn Specification: Open case size standard : Max. 380 x 680 mm, Min. 130 x 190 mm Board thickness : Max. 4 mm, Min. 1 mm Spine width : Max. 80 mm, Min. 8 mm Spine thickness, flexible : Max 0.5 mm, Min 0.3 mm Rigid : Max. 3 mm, Min 1 mm Cover material : Max. 0.3 mm, Min 0.1 mm Mechanical speed : Max. 60/min.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,3/ 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 8 Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 14 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) QA65 N Edge coils supporting unit (reels N°) 1 Itedpfezyahxox Akpsn Snipping (end-cutting) (2 x Kw 0,22) Fine Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (1 x Kw 0,35) Profile edge scraping unit MZ40 Glue scraping unit Buffing unit (2 x Kw 0,09)