Used Mazak Vtc 20 B for sale (357)

Condition: used, Year of construction: 2017, New spindel 2025-08 yearly service by Mazak Servicecenter. includes bar feeder Super 80 Max swing Ø 658 mm Swing over X-slide Ø 658 mm Swing when Y-axis is operating Ø 658 mm Max turning diameter Ø 658 mm Max turning diameter from bar Ø 51 mm (option Ø 65) Max part length 1011mm X axis: 615mm Y axis: +/-130mm z axis: 1077mm B axis: 0,0001Deg / 240° Spindle 1 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole 51 mm (option Ø 65) Spindle motor AC 22 kW 40% ED Speed range 35-5000 rpm Number of speed ranges Direct drive Max torque 467 Nm 25% ED Max part weight including chuck 300 kg Center height from floor 1235 mm Spindle 2 Spindle nose JIS A2-6 Spindle bore 76 mm Through-hole Not applicable (option Ø 65) Spindle motor AC 18.5 kW 40% ED Speed range 33-5000 rpm Number of speed ranges Direct drive Max torque 325 Nm 40% ED Max part weight including chuck 300 kg Center height from floor 1235 mm C-axis 1 Type Direct drive Rapid feed 555 rpm Bwodpfxex Hfl Ee Afneh Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree C-axis 2 Type Direct drive Rapid feed 555 rpm Working feed 1-5000 degrees/min Minimum programmable increment 0.0001 degree W-axis Movement 1066 Rapid feed 30 m/min B-axis B-movement 240 degrees Max machining feed (ISO) 40 rpm Minimum programmable increment 0.0001 degree Tool Holder Type: Tool changer Tool Shank Size: 25 x 25 mm Tool Change Time, tool to tool: 1.3 seconds Chip-to-chip time, average: 8 seconds Tool Holder for rotating tools: Capto C6 Tool Holder for turning tools: Capto C6 Max Tool Weight: 12 kg Max Tool Length: 400 mm Clamping Force for Tool (Capto C6): 33 kN Tool Magazine: Number of tool positions: 36 pcs Max Tool Diameter: 90 mm Max Tool Diameter when the position before and after is empty: 125 mm Max Tool Length: 400 mm Max Tool Weight: 12 kg Max Torque for Tool: 9.8 Nm Other: Length: 3990/4910 mm Width: 2800 mm Height: 2720 mm Weight: 13100/16600 kg Power Requirement, continuous: 72.34 kVA Air Requirement, min: 5 kg/cm², 410 liters/min Tool Magazine: 36 tools Standard Equipment: B-axis Capto C6 ATC Auto Recovery Auto power on/off, heating schedule 19” LCD touchscreen Mazak tool identification system including 10 ID chips (for Capto C6) Measurement arm for tool length setting, automatic compensation, and tool breakage detection 8” Chuck Type: Kitagawa B208A6 8” Chuck Type: Kitagawa B208A6 Coolant Tank Coolant Pressure for Upper Turret: Max 5 bar, 23 l/min Set of Manuals: (digital) Smooth Standard Software: Mazacc 2D software (shape comp) Mazacc 2D software för roterande axlar (shape comp) Mazacc 3D High Speed software High Smoothing Control Seamless Corner Control Variable Acceleration Control Ultra High Speed Machining Mode Rapid Overlap ISO/EIA Programming: Lathe and milling spindle start unsynchronized Synchronized threading with rotating tools Macro interruption allowing event-driven ISO/EIA programs Macro programming with 600 additional variable pairs for ISO/EIA Helix interpolation for ISO/EIA Coordinate rotation with G68 for ISO/EIA Polar coordinates, G122 for ISO/EIA Synchronized interpolation X-C-axis G12.1 for ISO/EIA Coordinate systems G54 - G59 + 300 additional for ISO/EIA Direct input of drawing dimensions, e.g. starting corner for ISO/EIA Inverse Time Feed (G93) 3D Cutter Compensation (G40-G42)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 52,298 h, functionality: fully functional, machine/vehicle number: 22/620, spindle speed (max.): 5,000 rpm, travel distance X-axis: 207 mm, bar passage: 65 mm, workpiece diameter (max.): 344 mm, Equipment: bar feeder, Submitting a bid obligates you to collect the item by 31/01/2026 at the latest! TECHNICAL DETAILS Maximum swing diameter: 370 mm Maximum machining diameter: 344 mm Maximum bar capacity: 65 mm Axis travel X1 Axis travel: 207 mm X2 Axis travel: 141 mm Y1 Axis travel: 100 mm Y2 Axis travel: 70 mm Z1 Axis travel: 760 mm Z2 Axis travel: 815 mm Bsdpfjx Ezvkex Afnowh Main spindle Speed range: 5,000 rpm Main drive power (40% ED / 100%): 22 / 15 kW Spindle bore: 76 mm C-axis resolution: 0.0001 degree Sub spindle Speed range: 5,000 rpm Drive power (25% ED): 22 / 15 kW C-axis resolution: 0.0001 degree Turret Number of stations: 2 x 12 Tool shank height: 25 mm Boring bar holder diameter: 40 mm Driven tools Speed: 6,000 rpm Drive power: 5.5 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3510 x 2810 x 2480 mm Machine weight: 12,500 kg Operating hours Total operating hours: 69,718 h Automatic cutting hours: 52,298 h Pure cutting Rev. 1: 26,775 h Pure cutting Rev. 2: 15,905 h FEATURES Bar feeder interface LNS Sprint 565 bar feeder Additional coolant nozzles on main and sub spindles Signal lamp (yellow) Hainbuch Spanntop Nova Axfix SK 65 (main spindle) Kitagawa B-208 (sub spindle) Workpiece unloading device with conveyor belt C-axis sub spindle: 0.0001 degree High-pressure coolant: 70 bar Mayfran Consep 2000 II chip conveyor, ejection to the right

Condition: refurbished (used), Year of construction: 2007, CNC MATRIX Machinable diameter 660 mm Machinable length 1045 mm Main spindle speed 5000 rpm Secondary spindle speed 5000 rpm Milling spindle speed 12000 rpm Tool magazine 40 tools CAPTO C 6 Cooling 70 bars C axis on secondary spindle ROBOT GL 100 F Chip conveyor CONCEPTS Bedpfx Aer Iyb Tjfnowh

Year of construction: 2013, condition: refurbished (used), CN MATRIX Machinable diameter 500 mm, machinable length 1016 mm, bar passage 65 mm, spindle speed 5000 rpm, rotating tools 12000 rpm, tool magazine 20 tools HSK 63, spindle indexing all degrees,MAZACC 3 D Conveyor Bwodpfsihp Iaox Afneh

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 2105 mm Measurements depth 3485 mm Machine weight 7500 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 3500–5000 Spindle bore 61 mm Number of axis 4 Movement X-Axis Movement 530 mm X-Axis Feed Force 0–6000 mm/min X-Axis Rapid Traverse 30 m/min Y-Axis Movement ±70 mm Y-Axis Feed Force 0–6000 mm/min Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 1065 mm Z-Axis Feed Force 0–6000 mm/min Z-Axis Rapid Traverse 33 m/min Tail Stock Pinol diameter 80 mm Bwsdpfxox D N Ips Afneh Pinol way 870 mm Pinol tool taper MK4 Tools Number of station 20 Max weight 7 kg Max tool diameter 90 mm Max tool length 250 mm This 4-axis Mazak INTEGREX 200 Y was manufactured in 2000. It features a maximum turning diameter of 540 mm, a swing diameter of 540 mm, and a bar diameter capacity of 51 mm. The machine supports a workpiece weight up to 150 kg and offers a spindle speed range up to 5,000 rpm. It includes a Mazak KM 63 quick change tool system with 20 slots. If you are looking to get high-quality turning capabilities, consider the Mazak INTEGREX 200 Y machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2001, x-travel 510 mm y-travel 510 mm z-travel 460 mm control Mazatrol Fusion 640M Main spindle: Max. rpm 12.000 min/-1 power capacity - main spindel 22 / 15 kW tool taper ISO 40 Spindle diameter 80 mm Accelaration 0 - 12.000 min/-1 : 1,7 sec table surface area 500 x 400 mm T-slots 5 x 18 mm T-slot - distance 80 mm distance spindle /table 190 - 650 mm max. workpiece height 500 x 500 x 405 mm max. table load 300 kg Swivel range A-Axis +30 / -120 ° rotation range c-axis +/- 360 ° Tool-Presetter: number of toolpositions 40 pos. max. tool diameter 80 mm Bodpfjtqmqxsx Afnowh max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg change-time chip to chip 4,5 sec feeds: feed speeds X/Y/Z: 1 - 50.000 mm/min rapid traverse X/Y/Z: 50 m/min Indexing A + C: 0,001 ° switching time 90°: A/C: 1,9 / 1,5 sec total power requirement 51 kVA weight of the machine ca. 7,5 t dimensions of the machine ca. 3,4 x 3,7 x 2,8 m CNC-Machining Center Vertical MAZAK - Variaxis 200 - 5-Axis

Condition: excellent (used), Year of construction: 2021, Mazak STX 2412 Fiber 3KW Manufacturer: Mazak Type: Super Turbo- X 2412 Fiber 3KW Year of manufacture: 2021 Condition: very good, used Switch-on hours: 9500h Cutting hours: 2800h Max. Workpiece size X-Y 1250 mm x 2500 mm Work table height 900 mm Axis travel X-Y 2520 mm x 1270 mm Axis travel Z 170 mm Rapid traverse speed Z 25 m/min Axis drive X1/X2 - Y Servo drive with ball screw Axis drive Z servo-driven Position accuracy X-Y +/- 0.01 / 500 mm Position accuracy Z +/- 0.01 / 100 mm Bjdpfx Afsxnpiusnewh Repeat accuracy X-Y-Z +/- 0.005 mm Cutting head With lens Focal length: 7.5'' Wall thickness Round tube Non-contact height sensing Operating status light Maximum sound level 80 dBA System weight 12,200 kg Structural steel O₂ 20 mm N₂ mild steel 6 mm Stainless steel 12 mm Aluminum 12 mm Galvanized 4 mm Brass 6 mm Copper 6 mm

Condition: excellent (used), Year of construction: 2016, Mazak Optiplex 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 05/2016 Condition: used, very good, under power Availability: from May 2023 Operating hours: Time CNC AN 29.999h Time laser AN 15.653h Time automatic operation 11.839h Cutting time 28,708h Total cutting time 6,665h CNC control: MAZATROL PREVIEW 3 Weight: 15000 kg Travel: 3,100mm x 1,580mm x 110mm Power requirement: 54 kVA. GENERAL MACHINE OPTIONS 1 set of adjustment tools Support grid (distance of the bars 100mm) Automatic calibration device Non-contact height sensing with repeat function Nozzle cleaning brush Focus position adjustment Manual workpiece clamping Machine feet / leveling shoes Machine status indicator light Bwodexnph Djpfx Afnoh NC monitoring for shielding gas pressure without resonator Programming function on the control unit via fixed programs Collecting container for material waste 6981NO612 Cutting table layer detection Transformer for the European market Additional selector switch for cutting gas CUTTING HEADS Multi-Control cutting head Lens for Multi-Control cutting head Cassette for focus lens Multi-Contro cutting head Protection window for Multi-Control cutting head 5 pieces NOZZLES Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm each 5 pieces Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 3rd auxiliary gas line (30 bar) PAINTING Mazak standard color PROTECTIVE HOUSING Laser safety screen (5 pieces) SAFETY EQUIPMENT Work area lighting Machine with CE mark Preparation for dust separator FACTORY AUTOMATION Automatic switch-off via circuit breaker triggering The power supply is switched off at the end of a program. PALLET CHANGER 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 15″ Xga Color Tft monitor LAN interface Mazatrol Preview 3 control NC repeat function Relocation Detector USB interface for PC MACHINE MODEL Preparation for 4kW resonator GENERAL MACHINE OPTIONS Automatic nozzle change magazine with 8 slots Nozzle cooling function Fiber Laser Resonator 4kW incl. cable and cooling unit Intelligent monitoring + focus point detection Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION Set of manuals in electronic form on CD

Condition: excellent (used), Year of construction: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 12/2016 Condition: used, very good, under power Availability: from July 2023 Operating hours: Time CNC AN 16.276h Time Laser AN 15.653h Time automatic operation 11.096h Cutting time 10,964h Total cutting time 7,365h CNC control: MAZATROL PREVIEW 3 Weight: 12800 kg Power requirement: 57 kVA. Dimensions: 8,490mm x 3,485mm x 2,010mm Axis travel: 3,100mm x 1,580mm x 110mm GENERAL MACHINE OPTIONS 6981SD120 1 set of adjustment tools 6981TL307 Support grid (distance between bars 100mm) 6981AS670 Automatic calibration device 6981SD154 Non-contact height sensing with repeat function 6981AS684 Nozzle cleaning brush 6981AS678 Focus position adjustment 6981SD168 Manual workpiece clamping 6981SD130 Machine feet / leveling shoes 6981SD282 Machine status indicator light 6981SD216 NC monitoring for shielding gas pressure 6981SD189 Without resonator 6981NO513 Programming function on the control unit via fixed programs 6981CV222 Collecting container for material waste 6981NO612 Cutting table layer detection 6981EL110 Transformer for the European market 6981SD200 Additional selector switch for cutting gas CUTTING HEADS 6981LN705 Multi-Control cutting head 6981LN005 Lens for Multi-Control cutting head 6981LN610 Cassette for focus lens Multi-Contro cutting head 6981LN602 Protection window for Multi-Control cutting head 5 pieces Bodpfx Afoxnphkonowh NOZZLES 6981NZ068 Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm 5 pieces each 6981SD317 Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces 6981SD303 Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 6981TL321 3rd auxiliary gas line (30 bar) PAINTING 6981SD728 Mazak standard color PROTECTIVE HOUSING 6981CC096 Laser safety screen (5 pieces) SAFETY DEVICE 6981SD030 Work area lighting 6981SD748 Machine with CE mark 6981ES230 Preparation for dust separator FACTORY AUTOMATION 6981AS050 Automatic switch-off via circuit breaker trigger The power supply is switched off at the end of a program. PALLET CHANGER 6981PC010 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 6981NC319 15″ Xga Color Tft monitor 6981NO869 LAN interface 6981NC083 Mazatrol Preview 3 control unit 6981FT575 NC repeat function 6981MZ200 Relocation Detector 6981NO870 USB interface for PC MACHINE MODEL 6981SD185 Preparation for 4kW resonator GENERAL MACHINE OPTIONS 6981AS662 Automatic nozzle change magazine with 8 slots 6981AS685 Nozzle cooling function 6981DEAA002 Fiber Laser Resonator 4kW incl. cable and cooling unit 6981SD118 Intelligent monitoring + focus point detection 6981RB165 Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED 6981DEES001 Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION 6981SD073 Set of manuals in electronic form on CD

Condition: used, Year of construction: 2005, functionality: fully functional, Mazak Quick Turn Nexus 200 CNC lathe (2005) Manufacturer: Mazak Type: Quick Turn Nexus 200 Universal 500 CNC Lathe Year of manufacture: 2005 Mazatrol 640T control Condition: used, under power, in production Max. swing diameter 675 mm Max. turning diameter 380 mm Max. turning length 511 mm Speed range 35 – 5,000 rpm Bwsdpfx Afexnngrjneh Main drive power 26 kW Max. torque 350 Nm Spindle bore 76 mm Number of tool positions 12 Rapid traverse X-axis 30.0 m/min Rapid traverse X-axis 30.0 m/min Tailstock mount MK5 Tailstock stroke 525 mm Number of tools 12 Turret indexing time 0.2s Length 2473mm Width 1780mm Height 1840mm Weight approx. 5000kg Scope of delivery – 1 set of manuals – Machine feet – Automatic parts catcher conveyor belt – Swarf conveyor hinge belt – Collet chuck – 6x tool holders – High-pressure pump 20 bar – Tool Eye – Bar loader prepared Note: without LTA oil mist extractor

Condition: good (used), Manufacturer: MAZAK Type: Integrex 200-4 S Control: MAZATROL MATRIX Year of Manufacture: 2010 Specifications Metric US Standard Max. turning diameter 660 mm X-axis 580 mm Y-axis 160 mm Z-axis 1045 mm B-axis 225° Spindle bore 82 mm Spindle speed 5000 rpm Spindle power 18.5 kW Counter spindle speed 6000 rpm Counter spindle bore 82 mm Counter spindle power 18.5 kW Tool changer 80 Driven tool speed 12,000 rpm Dimensions (estimated) Length 4500 mm Width 2400 mm Height 2900 mm Bwedpfx Aswpufgsfneh Weight 9200 kg Please note: The information on this page was obtained to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you check all important details.

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 7500 kg Control Unit Brand MAZATROL Model Fusion 640MT Main Drive Number of spindles 2 Spindle speed range 5000 Number of axis 5 Movement X-Axis Movement 530 mm Y-Axis Movement 140 mm Z-Axis Movement 1065 mm Tools Type of tool holder KM-63 Media Chip conveyor Yes Bsdpfx Afjx D Dphsnewh This 5-axis Mazak INTEGREX 200 SY was manufactured in 2001. A robust turn-mill centre featuring dual spindles and a MAZATROL FUSION 640MT control unit, it offers a spindle speed of 5000 1/MIN and movements of X-530 mm, Y-140 mm, Z-1065 mm. Consider the opportunity to buy this Mazak INTEGREX 200 SY turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), With sub-spindle With C-axis, with Y-axis MAZAK Mazatrol Nexus control Turning length -538 mm Swing Diameter -675 mm Turning diametre 380 mm Spindle speeds 35- 5'000 + 35- 6'000 rpm Tool changer with 16 driven positions Bar loader Tool presetter device Piece catcher attachment Bsdpoxpugbofx Afnewh Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2003, MAZAK INTEGREX 200 III-ST milling turning center CN: Mazatrol 640 MT PRO Year 2003 Hours: 87,613h Max diameter: 660 Races: X 580mm X2 150mm Z 1.045mm Z2 1.010mm Y +/- 80mm W 1050mm main spindle: power: 22kw max rotation: 5000 rpm Chuck: Kitagawa BB208 (210mm) bar passage: 65 mm secondary spindle: power: 18.5kW maximum rotation: 5000 rpm Chuck: Kitagawa BB-208 (210mm) bar passage: 65 mm Milling spindle: Power: 18.5kW Maximum rotation: 12000 rpm Tool magazine capacities: 40 x km63 (120 tools km63 with the machine) Lower tower: 9 tools Chip conveyor Mayfran consep B-axis tilt for turning tools flash tools Bwedpfx Afjk D Ez Iensh HOB 5 simultaneous axes C axis on main spindle and secondary spindle Bar feeder interface New spindle, replaced by MAZAK on 06/2022 Machine visible in operation in France (loan to the Belgian border)

Condition: used, turning diameter 340 mm turning length 575 mm control Mazatrol SmoothEZ max. swing diameter over bed 695 mm Standard machining diameter 235 mm bar material dia. max. 65 mm x-axis 215 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 10 m/min z-axis 605 mm rapid traverse Z-axis 30 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 15 KW 11 KW Max. Torque 167 Nm Bwodpfewngklsx Afnsh turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (40%ED) ca. 7,5 KW Power (continuous operation) 5,5 KW Max. Torque 53 Nm Milling spindle speeds ( driven tools) 20 - 4500 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 coolant tank 225 l Chuck diameter main spindle 8 '' Chuck diameter counter spindle 6 '' w-axis 585 mm rapid travel W 30 m/min c-axis 555 weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 2 x 1,8 m Special accessories: - Chip conveyor, hinged belt, side ejector - Production package, this package includes Preparation for bar feed Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (lateral) Signal light (3-colour LED), rectangular C-axis counter spindle 0.0001° Automatic tool eye 8" power chuck Kitag. BR08 & Cyl. SR1566C (HD1) GENERAL MACHINE OPTIONS Air blowing device on the chuck (counter spindle) Transformer for the European market Linear roller guides SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB - Memory Interface (1 slot) CE marking CE marking, metric, 50 Hz Counter spindle positioning 0.0001 degrees without C-axis Tool turret with 12 stations Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth restart function / restart mode Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 hp) 2nd spindle motor AC 7.5kW (20 hp) Main spindle motor AC 7.5kW MAIN SPINDLE C-axis main spindle Input accuracy (contour/index) 0.0001° Mazak standard colour (F white(fine)/S black) Automatic switch-off via circuit breaker trip Double foot switch Hydraulic pressure interlock RFID door interlock Safety foot switch with locking mechanism Safety measures according to worldwide standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and counter spindle) Feedback of the chuck status (main and counter spindle) Feedback of the chuck status via sensors. 8" power chuck 6" power chuck (counter spindle) Absolute positioning system Synchronous tapping with milling spindle Relocation Detector NC control Mazatrol SmoothEz 15" colour Lcd (touch screen) User macro (common variables: 600 pairs) EIA/ISO package EIA/ISO - input function EIA/ISO - additional functions Bolt line interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Tapping function (G33) Reverse feed rate G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak tapping/drilling cycle EIA/ISO - input function Scaling External data input/output Thr...

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 29,585 h, machine/vehicle number: 248377, laser power: 4,000 W, pipe diameter (max.): 406 mm, travel distance X-axis: 8,750 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 370 mm, product width (max.): 300 mm, swivel angle A-axis (max.): 999,999 °, swivel angle B-axis (min.): -135 °, swivel angle B-axis (max.): 135 °, The system was commissioned in 2014! TECHNICAL DETAILS Travel X: 8,750 mm Travel Y: 1,270 mm Travel Z: 370 mm Travel U: 9,300 mm Travel V: 2,515 mm A-axis: n x 360° B-axis: ±135° Control: Mazak FX CNC control Laser Bedevy Hnpepfx Afnowh Type: YB-L40 C10T01 Laser power: 4 kW Cutting head Type: 3D cutting head for tubes, profiles and free-form parts Lens: 8.5” Consumption: 15 l/h Material & cutting capacity Table load: 480 kg Max. workpiece lengths: 8,000 mm Max. diameter of round tube: 406.4 mm Max. diameter of square tube: 300 x 300 mm Max. diameter of double T-beam / H-beam: 300 mm Max. diameter of L-beam: 254 x 254 mm Cutting capacity (90° cut) structural steel: up to 20 mm Cutting capacity (90° cut) stainless steel: up to 10 mm Cutting capacity (90° cut) aluminum: up to 8 mm Loading & unloading system Loading and unloading length: 8 m (for profiles/pipes up to 8 m) Unloading axis stroke X/Y/Z/A: 925 mm Unloading axis stroke U/V/W/B: 326 mm Rapid traverse Rapid traverse X, U, V: 30 m/min Rapid traverse Y, Z: 24 m/min Rapid traverse A, B: 9,600 °/min Rapid traverse C: 6,000 °/min MACHINE DETAILS On hours: 29,585 h Dimensions: 21,832 x 6,922 x 2,664 mm Installation dimensions: 22,109 x 7,215 x 3,204 mm Weight: 36,500 kg Connected load: 87 kVA EQUIPMENT - Powerful 4 kW laser for precise pipe and profile processing. - 3D cutting head for versatile applications (pipes, profiles, free-form parts). - Preparation for extraction - Extraction - Touch sensor - Weld seam detection - H200 equipment - Automatic pipe length measurement - Laser starter kit - Short material loading - FX Tube software - E-Tower software - Instructions and documentation

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 157626, Manufacturer: Mazak Model: Integrex 200-2SY Controller: Mazatrol PC Fusion CNC 640 Robot NOT included Max. Machining diameter: 540 mm Max. Machining length: 1018 mm Spindlebore: 51 mm Spindlepower: 22 kW 5000 rpm Travel: X = 530 mm Z = 1065 mm Machine weight: 7800 kg. Bedovlxf Dopfx Afnewh Machine dimensions: L=5200 x W=2500 x H=2750 mm

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible. Bwodpjtx Dpfefx Afneh

Year of construction: 2015, operating hours: 13,792 h, condition: ready for operation (used), General Data Machine weight 8000 kg Control Unit Brand MAZATROL Model Preview 3 Main Drive Laser power 4.0 kW Workpiece Bjdpfx Afjx D I Twonewh Workpiece weight 900 kg Table Outer length 3000 mm Outer width 1500 mm Table load 900 kg This Fiber Laser Cutting Machine was manufactured in 2015. It features a 4.0 kW IPG Fiber Laser and MAZATROL PREVIEW 3 CNC Control, optimized for precision in cutting mild steel up to 9.0 mm and stainless steel up to 16.0 mm. The machine supports a table size of 3000 mm x 1500 mm and a max workpiece weight of approximately 900 kg. If you are looking to get high-quality cutting capabilities, consider the Mazak OPTIPLEX 3015 FIBER II machine we have for sale. Contact us for more information. Application Types Cutting

Condition: excellent (used), Year of construction: 2014, operating hours: 2,315 h, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 400 mm, turning diameter: 320 mm, spindle motor power: 15,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 50,000 rpm, spindle bore: 75 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 33 m/min, rapid traverse Z-axis: 33 m/min, total height: 1,700 mm, total length: 2,630 mm, chuck outer diameter: 210 mm, total width: 1,700 mm, bar diameter (max.): 66 mm, quill stroke: 500 mm, swing diameter over cross slide: 660 mm, spindle nose: 6, overall weight: 4,500 kg, MAZAK QUICK TURN 200 Smart Operating hours: Automatic cycle: 2,330 hours Condition: Very good condition, regularly serviced and meticulously maintained! Capacity & Working Area Max. swing diameter: D 660 mm Max. turning diameter: D 350 mm Max. bar capacity: D 66 mm Max. machining length: 520 mm Main Spindle Max. spindle speed: 5,000 rpm Spindle nose: JIS A2-6 Rated power (40% duty cycle): 15 kW Max. torque: 233 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 40 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 180 mm / 550 mm Tailstock Mount: MT NC axis, pressure via M-codes Dimensions & Weight Machine dimensions (L x W x H): 2,630 x 1,710 x 1,700 mm Weight: 4,500 kg (without chip conveyor and coolant) Chuck: Kitagawa BB208 with through-hole Chip Management Mayfran hinged belt chip conveyor Coolant pump 8 bar & chip flushing Bedowzkzzspfx Afnjwh General Specification: - SD MEMORY I/F (1 port) + USB MEMORY I/F (1 port) - Mazak standard colour - NC-controlled tailstock - Tailstock pressure adjustment - Tailstock with fixed live center mount - Operator door with interlock switch - Double foot switch - Fully enclosed work area - Work area lighting - Safety features compliant with global standards - Complete coolant system - Chuck condition monitoring - Automatic Tool Eye - 10.4" color screen - EIA/ISO package - LAN interface - Standard tool set

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 495 mm, bar diameter (max.): 51 mm, TECHNICAL DETAILS Machining diameter: 320 mm Turning diameter over slide: 320 mm Machining length (chuck workpiece): 180 mm Bar capacity: 51 mm Travels and feeds X-axis travel: 240 mm Y-axis travel: 100 mm Z-axis travel: 495 mm X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 10 m/min Z-axis rapid traverse: 33 m/min Spindles Number of headstocks: 2 Main spindle speed: 5,000 rpm Main spindle motor power (30 min / 100%): 22 / 15 kW C-axis resolution: 0.001° Spindle bore: 61 mm Counter spindle speed: 5,000 rpm Counter spindle motor power (30 min / 100%): 22 / 15 kW C-axis resolution: 0.001° Tool turret Number of tool positions: 2 x 16 Tool shank height: 25 mm Boring bar shank diameter: 40 mm Turret: with driven tools Driven tools Speed: 4,500 rpm Drive power: 3.7 kW MACHINE DETAILS Spindle chuck: Kitagawa B-208 (210 mm) Control: Mazatrol 640T Bwjdpfowi Na Ssx Afnsh Machine weight: 8,400 kg EQUIPMENT - 2 x 16-station tool turrets - CNC option package EIA / ISO programming - Air purge device on the chuck - Flex GL 150F gantry loader with pallet conveyor - Tool-Eye - Partition wall - High-pressure cooling 70 bar - Chip conveyor Mayfran ConSep 2000 II

Condition: used, machine/vehicle number: 33548, turning diameter over bed:533 mm turning diameter over slide rest:340 mm turning length:2000 mm Bjdpfx Afjcxxuconswh centre height:270 mm turning diameter in the gap:720 mm spindle bore:80 mm :12 turning speed range:25 - 1500 U/min feeds::76 travel of compound slide-rest:110 mm spindle travel:360 mm taper MK:4 bed width:370 mm weight of the machine ca.:2,87 t dimensions of the machine ca.:4,1 x 0,95 m

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE MAX ROTATING DIAMETER: 660 mm MAX TURNING LENGTH: 1495 mm MAX TURNING DIAMETER: 660 mm BAR CAPACITY: 65 - 65 mm SPINDLE: 35-5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35-5000 rpm; 18,5 kW; 254 mm HEAD: CAPTO C6 ; -30°+195° ; 15-12000 rpm; 18,5 kW X-AXIS TRAVEL: 580 mm X2-AXIS TRAVEL: 150 mm Y-AXIS TRAVEL: 160 mm Bedpfow Ey R Hjx Afnowh Z-AXIS TRAVEL: 1545 mm Z2-AXIS TRAVEL: 1490 mm B-AXIS TRAVEL: 1550 mm RAPID FEEDS X-Y-Z: 38 - 26 - 38 m/min TURRET HEAD: 9 POS TOOL MAGAZINE: CHAIN-TYPE ; 80 POS HIGH PRESSURE COOLANT: 18 Bar CONTROL UNIT: MAZATROL MATRIX WEIGHT: 11800 Kg OVERALL DIMENSIONS: 5090 x 3270 x 2830 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE MAX ROTATING DIAMETER: 660 mm MAX TURNING LENGTH: 1495 mm MAX TURNING DIAMETER: 660 mm BAR CAPACITY: 65 - 65 mm SPINDLE: 35-5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35-5000 rpm; 18,5 kW; 254 mm HEAD: CAPTO C6 ; -30°+195° ; 15-12000 rpm; 18,5 kW X-AXIS TRAVEL: 580 mm X2-AXIS TRAVEL: 150 mm Y-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 1545 mm Z2-AXIS TRAVEL: 1490 mm B-AXIS TRAVEL: 1550 mm RAPID FEEDS X-Y-Z: 38 - 26 - 38 m/min Bodpfx Aew Ey R Tjfnswh TURRET HEAD: 9 POS TOOL MAGAZINE: CHAIN-TYPE ; 80 POS HIGH PRESSURE COOLANT: 18 Bar CONTROL UNIT: MAZATROL MATRIX WEIGHT: 11800 Kg OVERALL DIMENSIONS: 5090 x 3270 x 2830 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 168121, Equipment: documentation/manual, rotational speed infinitely variable, Max. turning Ø 130 mm X-Axis Bwedpfswhrnijx Afneh 300 mm Z-Axis 240 mm Spindle bore 32 mm Speedrange 7000 rpm