Used Manual Panel Saw for sale (25,534)

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, cutting width (max.): 4,500 mm, feed rate X-axis: 140 m/min, section length (max.): 2,200 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum saw unit tool diameter: 380 mm Maximum scorer tool diameter: 200 mm Saw blade protrusion: 95 mm Number of rip saw grippers: 5 Nedpfjyxn Adex Acvewd Number of cross cut saw grippers: 8+4 Maximum feed speed: 140 m/min Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Scorer unit 1 connected load: 2.2 kW Scorer unit 2 connected load: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible push system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, safety, and operation of the machine at the place of destination. External reference: 5711

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Nedpoyuld Ajfx Acvowd Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: good (used), Code: 0343 Brand: PUTSCH MENICONI Model: SVP 950-M - CE Standard Nedpfjyxc Tkox Acvjwd Manual vertical panel saw for carpentry workshops, for vertical and horizontal cutting of panels, semi-finished products, furniture, doors, window frames, plastics and composite materials - CE Standard Technical data: Cutting length 5300 mm Cutting height 2200 mm Max cutting thickness 80 mm Motor power 7,5 Hp Blade diameter 300 mm Blade speed 5000 rpm Automatic electric sliding table to prevent damage to the support strips during horizontal cuts Small parts support device Liftable castor device for panel sliding Overall dimensions of assembled machine: mm 6500 x 1500 x 3000 h Overall dimensions for transport: Frame mm 6500 x 600 x 2350 h - Weight kg 590 + Column mm 3100 x 1130 x 1150 h - Weight kg 600

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Features and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Max. workpiece thickness: 80 mm Motor: 5.5 kW Compressed air connection: 6 bar, 50 NL/min Extraction connection: 2 x 100 mm, 1200 m³/h Pneumatic aggregate locking Nodpfxoywptzj Acvewd Pneumatic aggregate penetration Digital horizontal display Availability: by arrangement Location: Flörsheim

Condition: excellent (used), Panel Saw ELCON ADVANCE 215 DSX-A - used - Automatic clamp system for trimming the lower edge, Pneumatically retractable support grid, Sturdy locking positions for the saw carriage at the top and bottom, Electrically monitored locking for vertical cuts, Retractable riving knife for cut-outs, Control panel positioned at eye level, Digital display at the longitudinal stop, Digital display for horizontal cuts, Scoring saw unit with counter-rotation, Nsdpfx Asyq Rwyecvewd TRK extraction system, Certified dust extraction, Strip cutting device ----- Technical Data ----- Cutting length: 6,300 mm, Cutting height: 2,100 mm, Edging height: 2,000 mm, Cutting depth: 80 mm, Saw blade Ø: 300 mm, Motor: 4 kW, Extraction port Ø: 200 mm, Compressed air: 6-8 bar, Required space (LxWxH): 7,700x2,000x3,000 mm Quality Information: - Guide rails renewed - Complete basic inspection - Thorough cleaning - Electrical system checked - Immediately ready for operation

Condition: excellent (used), Panel Saw HOLZ-HER 1255 – used – Welded frame with extremely high rigidity, automatically retracting shifting grid, sturdy locking positions for saw carriage at top and bottom, electronic monitoring of vertical cut positions, fold-down plunge lever on saw unit, retractable riving knife for cut-outs, operator console at eye level, digital display for horizontal cuts, roller lifting transport system, Super-Cut scorer with carbide reversible blades, trimmable support table, TRK dust extraction system, dust-tested ----- Technical Specifications ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Trimming height: 2,100 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120 / 100 mm, Overall dimensions (LxWxH): 5,400x1,700x3,100 mm, Weight: 900 kg Quality Info: - Support rails replaced - Saw shaft newly mounted - New belts Njdpfx Ajyqwblscvowd - Complete general inspection - Complete general cleaning - Electrics checked - Immediately ready for operation

Condition: good (used), For sale: Striebig panel saw 6220 Automat Cutting range: 5300x2200 mm Cutting depth: 80 mm Nodpfx Acsyw Thpjvewd Operable with or without automatic feed 4 feed speeds 4 return speeds Machine is located in a small carpentry workshop and is available for powered inspection

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Features and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Max. workpiece thickness: 80 mm Motor: 5.5 kW Compressed air connection: 6 bar, 50 NL/min Extraction connection: 2 x 100 mm, 1200 m³/h Pneumatic aggregate locking Pneumatic aggregate penetration Digital horizontal display Availability: by arrangement Nwsdpfx Acjxymd Hovod Location: Flörsheim

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Nwjdpfxox Twcve Acvod

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,300 mm, saw blade diameter: 360 mm, Equipment: scorer, Technical machine data, SCHELLING Type fh 4 Nominal cutting length for saw 330: 3300 mm Maximum saw blade diameter (S): 360 mm Scoring blade diameter (V): 200 mm Maximum blade projection above table (U): 105 mm Maximum clamp opening (K): 105 mm Maximum stack height (P): (including total shaft heights and total maximum panel thickness tolerances) 95 mm Minimum panel thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of the strip aligner: 250 N / pc Maximum aligning force of the strip aligner: 1700 N / pc Minimum working height of longitudinal saw: 970 mm Minimum overall height: 2115 mm Main saw motor power: 18 kW Saw unit forward speed: 5 to 160 m/min Saw unit return speed: 160 m/min Nwjdpoyufixefx Acved Return feed speed - longitudinal saw: up to 80 m/min Mechanical lift table - for saw 330, max. panel width 2200 mm Hydraulic unit max. load capacity 7.5 t All information as provided by the manufacturer

Condition: refurbished (used), Striebig Automat III TRK 5220 AV + Max. cutting dimensions: 4300 x 2200 x 80 mm + Retractable rear wall + Central support shelf + Braked support rollers + 5.5 kW motor with 2 speeds + Feed continuously adjustable in horizontal and vertical directions from 10 – 25 m/min + Completely overhauled + All defective parts replaced + New wooden rear wall + All bearings replaced + Wall-mounted or free-standing installation All missing add-on parts shown in the pictures (such as hoses, side panels) are, of course, included. Delivery/installation in Germany, Austria, and Switzerland possible. Nodpfjyw Swvex Acvewd Other models available on request.

Condition: refurbished (used), Striebig Standard III TRK Type 5220 + Max. cutting size: 4300 x 2200 x 80 mm + Off-set rear panel + Center support + Braked support rollers + 5.5 kW motor with 2 speeds + Completely overhauled + All defective parts replaced + New wooden rear panel + All bearings replaced Nwodjyw Suuopfx Acved + Wall-mounted or free-standing installation Other models available on request. Delivery and installation in Germany, Austria, and Switzerland.

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight Nodpfxoxmk Ebj Acvewd MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: well-maintained Features and technical data: Cutting length: 4300 mm Cutting height: 2200 mm Cutting depth: 45 mm Motor: 3 kW Saw blade diameter: 220 mm with SuperCut scoring unit with automatic shifting grid with complete length stop Nwsdpfoycm Avjx Acvod with strip stop Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2022, operating hours: 105 h, Sliding table panel saw with a movable carriage and saw blade tiltable up to 46°, designed for safe operation and requiring 50% less space compared to a conventional sliding table saw and beam saw combined. Simple and fast programmed adjustments via the "Ready" control from the operator panel. Immediate positioning is ensured by a motorized and programmable rear fence, providing fast and precise workpiece alignment. Robust and reliable telescopic fence with scale and two flip stops: Panel cutting up to 2500x3200 mm (optionally 3200x3200 mm). The large fixed table ensures optimal support of the panel during processing. Technical data Class: px 350i Max. sliding carriage travel [mm]: 2600 / 3200 / 3800 Saw blade tilting range [°]: 0÷46 Max. saw blade diameter (cutting) [mm]: 350 Nwodpfjyb T Trex Acvjd Max. saw blade diameter (milling + cutting) [mm]: 300 Max. cutting height (D350) from table at 90°/45° [mm]: 105/72 Max. cutting height (D300) from table at 90°/45° [mm]: 80/50 Saw blade rotation speed [rpm]: 4000 Cutting width at rear fence [mm]: 1300 Other technical features: Three-phase motor: 7 kW, 50 Hz Extraction hood diameter [mm]: 120 (1) - 100 (2) Dimensions [mm]: L 3859, H 1368 Location: ex works customer - Available at short notice -

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Technical specifications: Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Nsdoymx S Dopfx Acvowd Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104

Condition: good (used), Code: 0295 Brand: PUTSCH MENICONI Model: SVP 620 - CE Standard Manual vertical panel saw - CE Standard Cutting lenght mm 4200 Cutting height mm 2200 Cutting depth mm 45 Motor power Hp 3 Blade diameter mm 250 Device for cutting of short pieces Nwjdpfx Aeyiumiscvjd Overall dimensions: Mounted machine mm 5400 x 1500 x 2950 h Weight kg 900

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,330 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, overall weight: 670 kg, Equipment: CE marking, saw blade guard, – Italian production – year of manufacture: 2012 TECHNICAL SPECIFICATIONS: – carriage length: 3200 mm – cutting width on the right: 1330 mm – saw blade diameter: min. 250 mm, max. 315 mm – scorer blade diameter: 120 mm – main motor: 5.5 kW – scorer motor: 0.75 kW – brake – main saw spindle diameter: 30 mm – scorer spindle diameter: 20 mm – cutting height adjustment – cutting angle adjustment: 0° - 45° – max. cutting height: 100 mm – two latches – movable guard Nwsdpfx Ajyxph Uecvod – extraction nozzle diameter: 80 and 120 mm – dimensions (L/W/H): 340 / 220 / 170 cm – weight: ~ 670 kg

Condition: good (used), Code: 0332 Brand: SALVADOR Model: SEL/600 - CE Standard Longitudinal panel saw for postformed strips and finished components with roller feed and unloader (SPLITTER) – CE Standard Technical data: Cutting width/REF mm 10–650 Cutting thickness mm 10-60 Crosscutting saw blade diameter mm 350 Scoring blade diameter mm 350 Crosscutting motor power Hp 5,5 Scoring motor power Hp 2 Carriage feed speed mt/min 15 Suction port diameter n° 2 mm 160 each Work surface height 900 mm Workpiece feed right/left Nedpfxjyu Uk Se Acvewd The panel saw consists of a cutting unit composed by 2 aligned blades. One blade scores the material and the other performs the cut Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Roller diameter 80 mm Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Stop guides Compressed air 6-8 atm Weight kg 1900

Condition: ready for operation (used), Year of construction: 2020, cutting length (max.): 5,300 mm, cutting depth: 80 mm, Technical Specification Max. Cutting Length 5300 mm Max. Cutting Depth 80 mm Njdpfxox D D Sco Acvowd This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. Application Types Sawing (Wood)

Year of construction: 1998, condition: ready for operation (used), Technical Specification Max. Cutting Length 3100 mm Nwsdpfx Aex D E Dmecved This SCHEER PA 4136 panel saw was manufactured in 1998. It features a cutting length of 3100 mm, cutting height of 70 mm, and a saw blade projection of 77 mm. Equipped with a 7 kW main saw unit and a 1.1 kW scoring motor, it offers a saw feed speed of up to 40 m/min. Consider the opportunity to buy this SCHEER PA 4136 panel saw. Contact us for more information. Application Types Sawing (Wood)

Year of construction: 2021, condition: ready for operation (used), This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. Nedox D Exqepfx Acvowd Application Types Sawing (Wood)

Year of construction: 2000, condition: ready for operation (used), Technical Specification Max. Cutting Length 3300 mm This HOLZMA HPL 23/X/33/22/30/L was manufactured in 2000. A robust used panel saw featuring a cutting length of 3300 mm, 3 air cushion tables, and a lifting table measuring 3300 x 2200 mm. It includes a main saw with 18 kW power and a scoring saw of 2.2 kW, controlled by a CADMATIC system. Contact us for more information about this machine. Nsdpfx Acsx D Hlfsvewd Application Types Sawing (Wood)

Condition: good (used), Year of construction: 1995, machine/vehicle number: 25486, functionality: limited functionality, power: 4.4 kW (5.98 HP), input voltage: 400 V, input current: 12 A, cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 300 mm, rotational speed (min.): 4,750 rpm, total length: 6,400 mm, overall weight: 1,000 kg, Equipment: scorer, Types: 6220 AV, cutting capacity: 5300V2200X80 mm, pre-scoring unit Nedpfx Ajywtw Dscvewd

Condition: used, Year of construction: 1994, Cutting length: 5300 mm Nodsytrhrjpfx Acvowd Cutting height: 2200 mm Shearing height: 80 mm Manual feed Measuring system: scale Freestanding supports Rated current: 21 A Storage location: supplier