Used dairy plant equipment for sale (65)

Condition: excellent (used), NNP Cheese block cutter Stainless, pneumatic cheese block cutter with stainless outfeed conveyor, max block 350mm w x 200mm h, Iolhcdewtilpjwwstb

Condition: excellent (used), Year of construction: 2018, 2500 litre system for cooking and cooling ready meals, soups, broths, fruit preparations, jams and marmalades, traditional and international dishes, sauces and pastes, confectionery. Installed new in 2018 at a cost of over £450,000 Ijlhcew Rn S Ujdwwjtb

Condition: good (used), Elopak carton machine, stated by manufacturer to run at up to 12,000 cartons per hour. Built in 1997 but totally rebuilt by manufacturer in approx 2004 and used for less than two years. Islhspivdijcdwwjtb

Condition: good (used), Regal Trepko rotary pot filler and sealer. Was previously used in a UK factory packing dairy products like yoghurts, cream, sauces etc. Itolhopgqtzocdwweb

Year of construction: 1998, condition: used, Manufacturer : APV Gaulin Model: MC 120 4 TBS Ijlhjx R A Hbocdwwetb Year : 1998 Type : Piston homogenizer Number of homogenizing effects: 2 Theoretical flow rate: 12000 L/h Pressure: 275 bar Piston Ø: 60.3 Valves : TBS (Ball)    

Condition: used, Manufacturer : SPX APV Islhex R A E Recdwwstb Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12048

Condition: used, Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Islhcox R A E Djdwwotb Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12049  

Year of construction: 2005, condition: used, Fabricant : Alfa Laval Model : Tetra pak C10-SM Year : 05 Type : Échangeur à plaque Application: pasteurizer Iolhcdwox R A Edjwstb Fluid group: 2 Volume: 533 L Pressure: 0/16.0 bar Temperature: 0 / 110°C Sections: 5 Plates: 64 units

Condition: excellent (used), Year of construction: 2011, Machine for dosing dry or liquid ingredients into liquid products such as ice cream or butter, consisting of a dosing unit, lamella transfer pump, horizontal mixer (for butter applications), and control cabinet. The hopper is fitted with a stainless-steel auger feeding the ingredients to the lamella pump; products may be dry or liquid provided sufficient viscosity. Capacity ranges from 200–4,000 l/h for liquid products and 20–400 l/h for dry products. The 70-liter hopper is mounted on three weighing/load cells. The system includes an inline horizontal mixer, is installed on a stainless-steel frame with adjustable feet, and all relevant components are suitable for CIP cleaning. The unit is equipped with two DN100 tri-clamp connections, supplied with documentation in French, and has no local operator panel as operation is centralized. Itelhsx Ttdcecdwwsb

Condition: good (used), Item: A-7577 Cream tank 10.000 L Stainless steel Process Cream tank, double jacketed, insulated scrape agitator from top, CIP mounted at top. Itslhcdwoh E Dp Aoweb 3 adjustable legs, manhole at top. capacity 10.000 L. We can offer 2 pieces from stock.r diameter 2458 mm

Condition: good (used), L-2017-APV-Prepress 10.000 L APV Cheese PrePress Type OPD 5,5 OCD in very good condition, capacity 10.000 L. Complete line still i function! APV Cheese Prepress unit with curd distributor. Year: Denmark 2000. Itslhcdodnkvdswweb

Condition: excellent (used), Year of construction: 2023, operating hours: 400 h, Skid-mounted UHT system, direct steam injection, 16,000 L/h, 2023. A complete UHT line, suitable for milk, cream and ice cream mixes. The system is delivered turnkey and is ready for both pilot and production operations. GEA TDS-6600-160INJ – 16,000 liters per hour Process Configuration Direct steam injection into the product with culinary steam filter Holding tube/flash tank Plate heat exchangers: PHE1: regeneration + steam heating PHE2: regeneration + chilled water cooling Heater: 137–142 °C / 6 seconds Final product temperature fully controllable via plate cooler Skid Layouts The UHT line is constructed on multiple skids, including the UHT section, homogenizer, and aseptic systems: SKID A: Balance tank for product, Fristam product pumps, Grundfos water pumps, process and steam valves, piping, ROI-box with recorder SKID B: Steam injector, holding heater, flash tank, pumps, valves, and auxiliary systems: PHE1: Plate heat exchanger for regeneration + steam heating PHE2: Plate heat exchanger for regeneration + chilled water cooling Aseptic Homogenizer: Soavi Ariete 5200, 250 bar, 5 pistons, 2-stage, installed downstream Sterile Water Skid: Auxiliary system for homogenizer Control Panels & MCC: including PLC and frequency converters SKID A: Aseptic valve manifolds (inlet and outlet cluster for tank) SKID B: Sterile air system for aseptic tank SKID C: Jacketed water circulation Itjlhcex R Uk Sjdwwsb Excluding: 60 m³ aseptic tank Control System Siemens PLC Danfoss variable frequency drives (VFDs) SCADA-controlled (SCADA system needs adaptation; not included in this offer) Central control panel and MCC included Condition Year of Manufacture: 2023 Less than 400 operating hours Excellent condition Documentation and P&ID drawings available

Condition: good (used), Kenplaat mixing tank Stainless 1500l mixing tank, top mounted motor, level detection, side bottom discharge Iolhcdwjrh Et Iswstb

Year of construction: 2020, condition: excellent (used), Faber SMESAMA Manual disk cutter Itjljxuku Ejhcdwwjb 2020, Stainless, manual disk cutter is used to make disks or half wheels from cheese wheels with rind or previously scraped, max input product size 500mm diameter and 320mm height, 4 disks per min, 3Ph

Condition: good (used), Mussana whipped cream machine Stainless whipped cream machine, capacity 4l, can hold up to 4l of cream and can whip up to 90l per hour, stainless 1Ph Ijlhcdev Tnzwewwjtb

Year of construction: 2021, condition: excellent (used), Boska Cheese cutter Itolhcdwoxru Tyoweb Stainless manual cheese cutter, cuts into segments with wire cut, tabletop

Condition: ready for operation (used), functionality: fully functional, For sale is a set of 3 scraped surface heat exchangers. This is a pilot unit and was most recently used in the R&D department of a cheese dairy. Manufacturer: Schröder Itolhcox R Ulpjdwwsb Year of manufacture: approx. 2005 Capacity: 500 - 1000 l 2 scrapers for heating, 1 scraper for cooling Condition: in good order, fully functional

Condition: used, Fulton Boiler with blowdown vessel and water softener, model number is RBC1250B Itelhcexxklredwwsb Including Grundfos multistage pump & its motor, condensate transfer pump, control panel Nu-Way automatic oil burning unit.

Condition: used, Cheese whey processing plant 15,000 Litres/Hour Plant consists of:- 250 litre stainless steel tank 15,000 litre/hr product pump complete with 5.5kw motor Tetra plex C8 SR plate heat exchanger SWEP gasketed hot water preparation unit Hot water pump complete with 3.0kw motor Automatic steam on/off valve Steam modulating valve Islhjxxi R Tscdwwetb Steam trap & Filter Holding tube for 25 seconds at 15,000 litres/hour in 3" pipe pipping and valving including 3 off x 2" 3 port flow divert valves RTD's for hot water, hot whey & cold whey High level probe for the balance tank connection to UF Allen bradley for operation Full complete specification can be sent on request.

Condition: excellent (used), Year of construction: 2011, Ingredient doser / Fruit feeder. To add a dry ingredient to a liquid like ice cream or butter (this machine). Main components of the unit: 1.) Dosing unit, 2.) Lamella transfer pump, 3.) Horizontal Mixer (used on butter) and 4.) Control panel. Hopper with 1 x SS auger to feed of ingredients to the lamella pump. Product to be dosed can be dry or liquid if it has sufficient viscosity to be retained by the augers. Liquid product capacity 200 - 4.000 liter per hour, dry product capacity 20 - 400 liter per hour. Hopper ± 70 L mounted on 3 weighing/load cells. With inline horizontal mixer. On SS frame with adjustable feet, parts for CIP cleaning. Connections: 2x DN100 Tri-clamp. With documentation (in French). No operation panel (was centralised). Total dimensions: 206x110x163 (lxwxh) cm - weight: 237 kg. Iolhcdwex Idh Iswotb

Year of construction: 2004, condition: excellent (used), Cavecchi Pulitrice F Cheese cleaning machine Serial: 51 Ijlhcsimgquodwwetb 2004, cheese cleaning machine, side and bottom brushes, 3Ph

Condition: good (used), Year of construction: 2010, 15 kg euroblock cheese production line. Capacity: 6.000 liters milk per batch input. Capacity of cheese: 600 kg cheese output. Milk reception - Milk reception pump from truck. Ijlhcdwsx Ekptewstb - Raw milk storage tanks (cooled). 2 x 6.000 liter, Meuller. Year: 2012. - Milk receiving manifold (Tuchenhagen valves). Milk processing - Van t’ Riet Pasteurizer incl. program, 6,000 liters. Year of construction: 1996. - Buffer pasteurized milk tank 6.500 liters. Cheese processing - Damrow closed cheese vat (double O), 6,000 liter capacity per batch. - Van t’ Riet drainage pre-pressing vat. Year of construction: 2010. - Tunnel presses (42 cylinders), Van ’t Riet. - micro perforated LAUDE moulds, 15 kg euro block. - 2x mould washers bins. - 8x brine cages (excluding brine baths, which are cast in concrete) - 2x brine cooling. Whey - Horizontal whey tank, over 6,000 liters capacity. CIP - CIP (full automatic, Siemens S7) consisting of 1 tank with 3 compartments Can be visited on request.

Condition: excellent (used), Year of construction: 2006, REF: MM6167 1 x Lister-Kuhlung milk cooling system. A robust and reliable piece of equipment designed for the efficient cooling and storage of milk in a food production or dairy environment.  Technical specification ⚙️ ✅ Manufacturer - Lister-Kuhlung ✅ Type - KL 2,7 PS VA T K Z.  ✅ Date of manufacture - 2006.  Itslhew H A Udscdwweb ✅ Electric supply - 400 V / 50 hz / 3 phase.  ✅ Power - 2.5 kW / 6.5 Amps.  ✅ Maximum pressure - up to 16 Bar. ✅ Maximum temperature - +22C. Typical applications ⚙️ Dairy Farms: For initial cooling and bulk storage of milk after milking. Milk Processing Plants: Used in the initial stages of processing to maintain milk temperature before pasteurisation or other treatments. Artisan Cheese and Yogurt Makers: Ensures the freshness of milk used in crafting high-quality dairy products.

Year of construction: 2022, condition: excellent (used), Machine for producing pressed pâtés, semi-hard and hard Islsxf I I Djhcdwwetb

Condition: good (used), Arcall Wright Pugson cheese portioner in lovely condition. Came out of a Liverpool cheese factory which went bust in 2019, has been in storage ever since. Ielhcet R R Uksdwwstb