Used Manual Panel Saw for sale (26,702)

Condition: used, Year of construction: 1985, with großer cut length 3500 mmused, good conditionmanufactured by Mayertype FSKbuilt in 1985 or 2,2 kWcut length 3500 mmsaw blade diameter ca. 180 mmpneumatic clampingrip fence with hand wheel adjustablefront extented tablerear extented tableveneer strip fence with stop fingerexhaust ductpneumatic service unitexhaust connection D 100 mmrequired space ca. l x w x h mm4400 x 1200 x 1300weight ca. 600 kgtotal connected power ca. 2,2 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Dedpfxsvwf Uvs Afnjun

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Dedpfx Afjvyuqfonjun

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Dedpfxjvyupze Afnjun

Condition: new, The Altendorf F 25 offers everything a panel saw needs to be able to do in a small space. And all in uncompromising Altendorf quality. A machine for beginners and professionals alike. Basic equipment: - Manual height and swivel adjustment 0 - 46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4200 rpm. - Double trolley, trolley length 3200 mm - Angle miter stop, cutting to length up to 3450 mm - Braking device, illuminated button - Saw blade diameter max. 315 mm, - Saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 88 cm Package 1 includes: - 5.5 kW (7.5 HP), 2 speeds Duedpfx Afevyd A Donen - Parallel stop, 1000 mm* - Large suction hood (PSV) - Basic scoring saw with LED lighting

Condition: used, Year of construction: 2003, with electronic rip fence and large cutting width 1500 mmused, top condition, top equipmentMake SACType CS 450Year of construction 2003Machine no. LD 2206CE-type testedMotor 5.5 kWSteel guidesCar length approx. 3200 mmCutting width approx. 1550 de diameter 450 mmswiveling up to 45 °Scoring unitControl panel can be swiveled at the topRip fence with automatic controlTable top extension approx. 940 mm x 650 mmElectric height adjustmentPositioning control 3 axesDigital display:- Height- cutting angle- Rip fence- Rotation speedExtraction connection D 100 mm / 120 mmRequired space approx. 3400 mm x 3700 mm x 1800 mmWeight approx. 1500 kgTotal connected load approx. 6.25 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Djdpfx Afovyd Dbenoun

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Dedpfsvyup Ujx Afneun

Condition: new, The Altendorf F 25 offers everything a panel saw needs to be able to do in a small space. And all in uncompromising Altendorf quality. A machine for beginners and professionals alike. Basic equipment: - Manual height and swivel adjustment 0 - 46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4200 rpm. - Double trolley, trolley length 3200 mm Dsdpevyur Njfx Afnjun - Angle miter stop, cutting to length up to 3450 mm - Braking device, illuminated button - Saw blade diameter max. 315 mm, - Saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 88 cm Package 2 includes: - 5.5 kW (7.5 HP), 2 speeds - Parallel stop, 1410 mm* - Large extraction hood (PSV) - Basic scoring saw with LED lighting

Condition: used, Year of construction: 1985, used, good conditionmake Striebigtype 6220 Ayear of manufacture approx. 1985motor 4.4 kWcutting length approx. 5300 mmcutting height approx. 2100 / 2200 mmcenter supportcutting depth 80 cmsaw blade diameter approx. 303 mmwall mountingslatted frame moving awaysupport rails woodsuction connection D 120 mmspace requirement approx. 6300 mm x 1250 mm x 2720 mmWeight approx. 1200 kgTotal connected load approx. 4.4 kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover as seenwithout guarantee and warranty Duedpjvwfgxofx Afnen

Condition: used, Year of construction: 1981, used, good conditionMake Holz-HerType 1215Year of manufacture 1981MachineNo. 710motor 4.0 kWcutting length approx. 5300 mmcutting height approx. 2100 mmcutting depth 80 mmsaw blade diameter approx. 300 x 30 mmfree-standingslatted frame moving awayspace requirement approx. 6550 mm x 1265 mm x 2895 mmweight approx. 1000 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspectedwithout guarantee and warranty Dodpfovwfmxox Afnsun

Condition: used, Year of construction: 1978, self-extraction with dust bag, with handwheel feedused, top condition, little runmake Scheertype FM5 - 3100 Kyear of construction . 3721motor 1,8 kWsaw feed / handwheelcutting length 3100 mmpneumatic clampingrear support tablestrip fence with fence fingerrip fenceown suction with dust bagspace requirement approx. 4200 mm x 1200 mm x 1200 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Duedpfevwfh Nex Afnsn

Condition: used, used, good conditionmanufactured by Scheertype FM 8-3100Masch.-No. 83077motor 1,85 kWcut length 3100 mmsaw blade diameter ca. 160 mmpneumatic clampingrear extented tableself-exhaustrequired space ca. l x w x h mm4000 x 1000 x 1300weight ca. 450 kglocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Duedpfx Ajvwftxefnsn

Condition: used, Year of construction: 1994, with Supergehrfixangle mitre fenceused, good conditionmake Panhanstype 690year of construction 1994machineNo. 1286GS wood dust testedmotor 5.5 kWsteel guidescarriage length approx. 3200 mmcutting width approx. 1250 mmswivel up to 45°scoring unitparallelogram protectiontable top extensionhydraulic height adjustmenthydraulic swivel adjustmentdigital display:- cutting angleangle stop as mitre fence with length compensation / super mitre fixsuction connection D 120/80 mmspace requirement approx. 3200 mm x 3700 mm x 1700 mmWeight approx. 1000 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loadingHandover as is, as inspectedwithout guarantee and warranty Djdpfx Afjvxr Npsneun

Condition: new, -New-CE version- The WA 6 is the smallest Altendorf sliding table saw,that exist.- Despite its smaller dimensions, it impressesgreat achievements.- She trumps herself with her strong equipmentbig in the smallest space.- The cutting quality and flexibility are outstandingin daily hnical specifications:Double trolley length 2000 mmMotor 4 kW, speed 4200 ring unit 0.37 kWCutting height max. 100 mm, at 45° max. 72 mmmanual height and swivel adjustment 0-45°Cutting width 1000 mm, manually adjustableCut to length on the miter stopup to 2600mmSuction connection top/bottom 50/100 mmWorking height 910 mmWeight from 450 kg Dsdpfx Asvyurpjfneun

Condition: new, F 45 ProDrive:The new F 45 is a masterpiece of technology and design. The machine stand, which has been redesigned from the ground up, exceeds all previous values in terms of torsional rigidity and low eye-level control, with which you can call up the height and tiltof the saw blade plus, depending on the control package selected, the speed andother functions.3.5" color screen with separate keyboardAutom. Automatic dimensional correction at the parallel and angle stop when swivelling the saw unitSimple calibration of the axesMachine diagnostics, operating hours counter, USB interfaceCalling up the last dimension entry (back function)99 storable cutting programsGrooving: with automatic step-by-step positioning of therip fence400V / 50Hz - Europe , scale: scale in mmM44249machine height 910 mmM64099eye-level operationbasic equipmentThe control panel of the F 45 is mounted at eye level. This means that all axes can be conveniently controlled and all settings are in -hand operation of the swing-away deviceM64096max. blade diameter 450 mmBasic equipmentThe F 45 is equipped with a parallelogram guardwith two hoods for 90° and angle cuts.{They are infinitely adjustable in large pressure roller in the infeed automatically adjusts theguard to the workpiece maximum saw blade diameter is 450 mm. This achieves a saw blade projection of max. 154 mm.M511005.5 kW (7.5 hp)optionalone-sided swivel saw unit with 5.5 kW (7.5 hp) motor,manuallyadjustable to 3/4/5000 rpm. Swivel range: 0 - 46°AKE quick-change system for the main saw bladeThe motors have 20% more torque than standard electric motors with the samepower consumption.M24038Preparation for 2-axis scoring unitOptionScoring unit preparationfor retrofitting a scoring unitM41010Table top extension 840 mmBasic equipmentTable top extension 840 mmconsisting of a CDF panel with HPL coating on both sides. Itis particularly scratch and impact resistant.M34204Double castor trolley with trolley length 3200 mmOptionDouble castor trolley, trolley length 3200 mmThe Altendorf double castor trolley can be locked in any position. Thedouble castors, made of hardened steel, holdthe upper carriage in conjunction with the lower carriage absolutely precisely in thehard chrome-plated guide rods. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-hollow chamber system. The table surface is anodized.A hard chrome-plated round bar serves as a mount for the cross slide and as an interface for various accessories.M44404Angle mitre fenceOptionAngle mitre fence, cutting to length up to 3500 mmThis Altendorf-patented fence with integratedlength compensation facilitates the precise cutting of 90° angles andmitres in one function. In the front and rearstop position, the swivel angle is infinitely adjustable by 49° andis indicated by a measuring scale. Simply move the fence ruler to theselected angle dimension according to the scale and then set the desired lengthon the fence cut-to-length dimensions from approx. 1700 mm, theroller-supported and stable telescopic extension takes over the outer fence entire cross slide is supported by a precision-manufactured,prismatic support of the round bar of thedouble roller carriageIncluding: two single tilt stopsM44441CNC parallel fence 1000 mmOptionCNC parallel fence, cutting width 1000 mmThe CNC-controlled parallel fence can be controlled at a traversing speedo... Djdpfx Aovzhdzofnoun

Condition: used, Year of construction: 1983, usedMake Holz-HerType 1215Year of construction 1983MachineNo. 1222cutting depth 80 mmmotor 4 kWcutting length approx. 5300 mmcutting height approx. 2000 mmsaw blade diameter approx. 300 mmfree-standingslatted frame moving awaysuction connection D approx. 100 mmspace requirement approx. 6300 mm x 1100 mm x 2700 mmWeight approx. 1000 kgTotal connected load approx. 3 kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Dujdjvwfnpjpfx Afnen

Condition: used, second handMade by ScheerType FM 2P-3000Machine no. 81394Motor 1.1 kWCutting length approx. 3000 mmpneumatic tension 1 cylinderrear support tableRequired space approx. 3600 mm x 1100 mm x 1300 mmWeight approx. 350 kgStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Dodpfx Aovwf E Iofnjun

Condition: new, Universal complete solutionfor cut optimization and label printingIncluding office software, W-LAN box, tablet PCwith machine holder and label printer- Easiest handling and suitable for all machines- Cut optimization at the desk or directly on the tablet PC- Immediate availability of the cutting plan on the sawW-LAN transmission- Parts lists can be used from all common (CAD) programs- Label printing by simply pressing the pieces in the cutting plan(Touch screen)- Labels with dimensions etc. on the cut edge ensure goodOverview in the panel store Dujdpfxjvwf Ipj Afnjn

Condition: used, Year of construction: 1970, used, good conditionmake Scheertype FM2 3000year of manufacture approx. 1970machine no. 102748cutting length 3000 mmsaw blade diameter approx. 180 mmrear support tablespace requirement approx. 3500 x 1000 x 1300 mmweight approx. 400 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Dusdpjvwfpgsfx Afnen

Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Dujdpfx Aevxr S Refnen

Condition: new, - Electric motor height and swivel adjustment 0 - 46° for the main saw blade - Digital swivel angle display - Saw blade projection max. 150 mm, saw blade diameter max. 450 mm - Double roller carriage, carriage length 3000 mm including stepless upper carriage lock - Parallel stop manual adjustment, adjustable via measuring scale, including fine adjustment, cutting width 1000 mm - Angle stop with fixed 90° position, manually adjustable via measuring scale up to 3200 mm - Drive motor 4 kW (5.5 HP) with 1 speed 4000 rpm - Tool clamping system AKE for the main saw blade Item no. M19308 - including surcharge for motor 5.5 kW (7.5 HP), 3 speeds Duodpfevyuriex Afnon

Condition: new, The Altendorf F 25 offers everything in a small space,what a sliding table saw must be able to do. And that inuncompromising Altendorf quality.A machine for beginners and professionals ic equipment:- Manual height and swivel adjustment 0 - 46 °of the saw blade, with digital display- Drive power 4 kW (5.5 HP) with one speed,4200 rpm.- Sliding trolley, trolley length 3200 mm- Crosscut-miter fence, lengths up to 3450 mm- Braking device, illuminated button- saw blade diameter max. 315 mm,- Saw blade protrusion max. 104 mm- Cutting height 100 mm, 70 mm at 45 °- Machine height 88 cmPackage 3 including:- 5.5 kW (7.5 HP), 2 speeds- DIGIT X rip fence, 1000 mm- Large suction hood (PSV)- Basic scorer with LED lighting Duodpevzhd Iefx Afnsn

Condition: new, -New-CE version- The WA 6 is the smallest Altendorf sliding table saw,that exist.- Despite its smaller dimensions, it impressesgreat achievements.- With her strong equipment she trumps herselfthe smallest space.- The cut quality and flexibility are excellentin daily hnical specifications:Sliding table length 2600 mmMotor 4 kW, speed 4200 ring unit 0.37 kWCutting height max. 100 mm, at 45 ° max. 72 mmmanual height and swivel adjustment 0-45 °Cutting width 1000 mm, manually adjustableCutting to length at the crosscut-miter fenceup to 2600 mmExtraction connection top / bottom 50/100 mmWeight 550 kgWorking height 910 mm Dodpfx Afovyd Dnsnoun

Condition: new, A machine for beginners and professionals ic equipment:- Manual height and swivel adjustment 0 – 46°of the saw blade, with digital display- drive power 4 kW (5.5 hp) with a speed,4200 rpm.- Double trolley, trolley length 3200 mm- Miter stop, cutting to length up to 3450 mm- Braking device, illuminated button- saw blade diameter max. 315 mm,- Saw blade overhang max. 104 mm- Cutting height 100 mm, 70 mm at 45°- Machine height 88 cmPackage 5 including:- 5.5 kW (7.5 hp), 2 speeds- Rip fence DIGIT X, 1000 mm*- Large extraction hood (PSV)- Without scorer (prepared for the subsequent installation of ascoring unit) Duedovyd Duspfx Afnjn

Condition: used, Year of construction: 1989, with electrical height and swivel adjustment   used, great condition Panhans make Type 688 Year of manufacture 1989 Machine no. 287 GS-approved Motor 5.5 kW brake Cutting width approx. 1250 mm Cutting length approx. 2700 mm swiveling up to 45 ° Scoring unit Parallelogram protection Electric height adjustment Electric swivel adjustment Angle stop as a miter stop Dodpevxr Sqefx Afnsun Extraction connection D 120 mm / 80 mm Required space approx. 2800 mm x 3400 mm x 1400 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition as viewed, without overhaul, without guarantee and warranty

Condition: used, used, good condition Make Steton Type SC 400 / 3200 CE type tested Motor boosted 6.5 kW Trolley length approx. 3200 mm Cutting width approx. 1300 mm max. blade diameter 400 mm swiveling up to 45° scoring unit parallelogram protection control panel above Rip fence with electrical adjustment Table top extension approx. 400 x 800 mm Electric height adjustment Swivel adjustment electric Digital display: - cutting angle - Rip fence - Rotational speed Extraction connection D 120 / 60 mm Space requirement approx. LxWxH mm Djdpfevyt D Dox Afnjun 3400x2300x1700 Weight approx. 1000 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -