Used Manual Panel Saw for sale (28,438)

Condition: good (used), Year of construction: 1998, Striebig Automat III TRK, manufactured in December 1998 Rcsdpoznncmofx Akish Technical details: Power: 4.4 kW (5.98 hp) Input voltage: 400 V Input current: 12 A Cutting height (max.): 2,200 mm Cutting width (max.): 4,300 mm Saw blade diameter: 300 mm Speed (min.): 4,750 rpm Overall length: 5,400 mm Total weight: 1,000 kg Location: available from stock in 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2008, Holzma automatic panel saw PROFI HPP 510/56/56/P Year: 2008 Technical data Positioning accuracy +/- 0.1 mm 5 air cushion tables, 2,810 x 650 mm 1 fan, adjustable pressure Cutting length: 5,600 mm Cutting width (pusher travel): 5,600 mm 11 combination profile rails, dual-track 9 clamps, two-finger type Max. cutting height: 125 mm Rcedpfxsz Iliue Akijh Saw carriage feed (forward): 0.1 – 150 m/min Saw carriage feed (return): constant 150 m/min Pusher feed (forward/return): max. 90 m/min 11 combination profile rails, dual-track Max. forward speed of 25 m/min is mandatory within the EU Automatic pressure beam height control Main saw motor (frequency-controlled): 21 kW Speed: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz (+10 / -5%) Connected load: 30 kW Working height: 1,020 mm Main saw blade: 450 x 4.8 x 60 mm Scoring saw blade: 180 x 4.8 – 5.8 x 45 mm Compressed air: 6 bar Air consumption: 210 NL/min (approx., at extraction port) 30 – 32 m/s Negative pressure: 1,200 Pa Extraction volume: 5,800 m³/h Chip duct connection: 1 x 200 mm Pressure beam connection: 2 x 150 mm Quality standards: CE tested, GS tested, FPH dust-tested. Stock no.: 2003040BX

Condition: used, Year of construction: 1999, Used Machine Year of manufacture: 1999 Features and Technical Specifications: - Usable cutting length: 4200 mm Rcodpfx Akjzy Dz Neieh - Usable cutting width: 3200 mm - Saw blade overhang: 70 mm - Max. cutting height: 60 mm - Main spindle motor power: 7.5 kW - Main saw blade diameter: 280 mm - Scoring saw motor power: 1.1 kW - Scoring saw blade diameter: 125 mm - Saw carriage feed speed (forward): 0–40 m/min - Saw carriage return feed speed: 40 m/min - Saw blade change: with key - One continuous pressure beam - Control system: Euroline 1 - 99 programs - Panel cutting from the front - Final panel cut - Cutting with sensor - Air-cushion support tables: 4 - Exhaust ports: 140 mm at the bottom (required vacuum pressure: 800 Pa) - Exhaust ports on the pressure beam: 2 x 100 mm (required negative pressure: 830 Pa per exhaust port) - Air velocity: 20 m/s

Condition: good (used), Year of construction: 1980, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW Redpfxjyku U Ne Akioch machine weight ab. 500 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 2,200 mm, cutting width (max.): 4,300 mm, saw blade diameter: 3,030 mm, total length: 5,400 mm, total width: 1,600 mm, total height: 2,770 mm, overall weight: 800 kg, Equipment: CE marking, scorer, Technical specifications: Manufacturer: Striebig Model: Standard TRK3 5220A Year: 8/95 Feed: manual Rcedpfsy Sgz Esx Akieh Construction: automatically retracting wooden slat frame Saw carriage locking: manual Saw unit plunge: manual Motor power: 5.5 kW Cutting area: 4300 × 2200 × 80 mm Speed: 4750 rpm Saw blade diameter: 303 mm Required space: L × H × W 5400 × 3000 × 1400 mm Mounting: free-standing Location: warehouse Delivery and installation possible by arrangement Price: €11,888 gross, VAT can be stated separately.

Condition: ready for operation (used), functionality: fully functional, power: 2.21 kW (3.00 HP), input voltage: 380 V, cutting width (max.): 900 mm, saw blade diameter: 300 mm, DeWalt radial arm saw for wood, light metals, and plastics, with a 300 mm saw blade, 3 HP (380 V three-phase), adjustable and tiltable. The motor-saw blade unit moves 900 mm along the upper arm, which is height-adjustable and can be swiveled to the left and right. Used, fully functional machine, including base. Redpfx Akszl Hfusisch

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: AE00005394, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 60 mm, cutting width (max.): 3,200 mm, saw blade diameter: 370 mm, rotational speed (max.): 4,650 rpm, Equipment: CE marking, documentation/manual, saw blade guard, Automatic single-blade panel saw Gabbiani P60 for cutting sheet materials (chipboard, MDF, plywood, fiberboard) and solid wood. Technical specifications: - Cutting length 4300 mm, cutting width 3200 mm - Saw blade overhang 60 mm - Main saw blade Ø 370 mm, scoring saw blade Ø 200 mm - Scoring saw motor 1.5 kW New machine, year of manufacture 2026, available for immediate delivery from stock in Waregem. Request a non-binding quote. Redpfx Akjz Rmwgjioch

Condition: not inspected (used), Year of construction: 1998, machine/vehicle number: 13189, functionality: limited functionality, VERTICAL PANEL SAW WITH ELECTRIC MOVEMENTS & DIGITAL DISPLAYS FOR CUTS Brand: GMC MACCHINE SRL Model Type: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential refurbishment, machine offered as-is) MACHINING CAPACITIES: - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm Rodeu R Ulhopfx Akijch - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380V Three-phase+T - Installed power: 7.5 kW - Main motor power: 4.4 kW (6 hp) - Saw blade speed: 5,200 rpm Pneumatic blade feed - Carbide-tipped saw blade: Ø 300 mm, bore Ø 30 mm - Welded steel frame, PVC slat frame with automatic retraction via pneumatic cylinders - Fully lengthwise pneumatic retractable intermediate support with 2 adjustable and retractable stops - Retractable rollers for panel handling - Pneumatic locking of the saw carriage - 8 bar pneumatic feed - Digital display for cuts - Complete extraction system DPS Back cover spans the entire rear of the machine Lower longitudinal channel for sawdust collection Multiple extraction points in the lower section Extraction port: Ø100 mm - Support for floor-mounted installation - CE Marked Total space required when mounted on supports: 6300 x 1600 x 3040 mm (includes operator and maintenance area) Transport dimensions, 2 packages: . 1 frame 6300 x 860 x h.2620 mm . 1 pallet 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Offered as a lot, without refurbishment or warranty. Ex works price, excluding VAT. Transport and services on request.

Condition: used, Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw -Motor power: 6 kW -Speed: 2880 rpm Rodpfx Ajb R Addokiech -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm -Weight: 1220 kg

Condition: used, machine/vehicle number: 008567, Max. panel width: 3800 mm Max. panel length: 3800 mm Rcodpfxjzvwi Es Akieh Main saw blade projection: 75 mm No of Grippers: 6

Condition: used, Felder K700 panel saw, year of manufacture 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm panel table length, approx. 300 kg Rcsdpfjvrvluex Akish Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Year of construction: 1989, Cutting length: 5300 mm Cutting height: 2100 mm Cutting depth: 80 mm Scoring unit: no Feed: manual Horizontal cut display: scale Vertical cut display: scale Saw blade diameter: 300 mm Swiveling material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 6500 mm Machine depth: 1500 mm Rjdpfxszqyyio Akioch Machine height: 2800 mm Weight: 800 kg

Condition: excellent (used), Catalog number: 8135 TECHNICAL DATA - Minimum cutting length: 400 mm - Maximum cutting length: 2960 mm - Maximum cutting height: 100 mm - Blade diameter: 400 mm - Blade guard (serves as a clamping device) Rjdpfe Afdhkex Akioch - Spindle diameter: 30 mm - Main motor power: 3 x 2.2 kW - Feed motor power: 0.75 kW - Smooth feed speed adjustment - Manual movement of the left/right cutting unit - Center cutting unit – fixed - Dust extraction nozzle diameter: 2 x 100 mm - Overall dimensions (length/width/height): 6240 x 1450 x 2050 mm - Weight: approximately 1800 kg ADVANTAGES - Polish-made - Suitable for processing pallet boards - Used saw, very good condition Net price: 28,900 PLN Net price: 6,721 EUR (depending on the exchange rate of 4.30 EUR) (Prices are subject to change due to exchange rate fluctuations)

Condition: good (used), Code: 0353 Brand: SCM Rcedpfoy A Svpox Akioh Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Blade carriage feed speed 6–30 mt/min N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 11 Kw Main rotation speed 3900 rpm Scoring unit diameter 160 mm - Hole 55 – Motor 1,5 kW Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300

Condition: excellent (used), Year of construction: 2017, I sell the panel beam saw SCM SIGMA PRIMA 67 P. Year 2017. Cutting size 3300x2200mm + back loading table. Rcsdpfx Akjz Suv Hsieh Cutting height 67mm. Main motor 9,0 kW Scoring motor 1,3 kW Max saw blade diameters 330 + 160mm Total area covered W.5400mm x D.9900mm 9 pcs. gripper with pneumatic regulation Side alignment with pneumatic stroke. Wincut optimising software included. Very good condition. Available immediately.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 95 mm, cutting width (max.): 3,300 mm, saw blade diameter: 360 mm, Equipment: scorer, Technical machine data, SCHELLING Type fh 4 Nominal cutting length for saw 330: 3300 mm Maximum saw blade diameter (S): 360 mm Scoring blade diameter (V): 200 mm Maximum blade projection above table (U): 105 mm Maximum clamp opening (K): 105 mm Maximum stack height (P): Rsdpfx Aoyufixokisch (including total shaft heights and total maximum panel thickness tolerances) 95 mm Minimum panel thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of the strip aligner: 250 N / pc Maximum aligning force of the strip aligner: 1700 N / pc Minimum working height of longitudinal saw: 970 mm Minimum overall height: 2115 mm Main saw motor power: 18 kW Saw unit forward speed: 5 to 160 m/min Saw unit return speed: 160 m/min Return feed speed - longitudinal saw: up to 80 m/min Mechanical lift table - for saw 330, max. panel width 2200 mm Hydraulic unit max. load capacity 7.5 t All information as provided by the manufacturer

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts Rcjdpfx Akju R Syisijh - new exhibition machine -

Condition: used, Year of construction: 2018, max. cutting width: 5200 mm max. cutting height: 2200 mm saw blade diameter: 250 mm max. processing thickness: 60 mm saw blade arbor: 30 mm lower support: plastic Rodpfxoz Aibge Akisch material support: plastic strips, retracting measuring system: digital display swiveling saw head: manual saw feed: manual mounting: free-standing extraction: external locking of saw beam: manual weight approx.: 1200 kg motor power: 4.2 kW Location: Nattheim

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Rcjdpfszuyl Tjx Akieh Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), Year of construction: 2019, Sawblade tiltable 45 ° Rjdpfx Aksz E Sv Neijch Length of the rolling table 2500 mm cutting width 1250 mm Motor output 4,0 kW Cutting height 90 mm Speed 4000 / 6000 U/min. weight of the machine ca. 650 kg

Condition: used, Year of construction: 2003, machine/vehicle number: 0-34-07-5949, functionality: fully functional, input voltage: 24 V, input current: 48 A, input frequency: 50 Hz, cutting height (max.): 320 mm, cutting width (max.): 60 mm, We offer this used HOMAG Optimat chf 41 circular table saw, year of construction 2002. Manufacturer: HOMAG Model: Optimat chf 41 Construction year: 2002 year Condition: used Category ID: 2094 Type ID: 1612 Rcedpfxjzq Hwho Akish Machine type: circular table saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, GRIGGIO UNICA 400 professional sliding table panel saw, manufactured in 2014. Heavy-duty industrial woodworking machine, ideal for carpentry workshops, furniture manufacturers, cabinet makers, and woodworking production facilities. The machine features a robust construction and is equipped with a 2200 mm sliding table for accurate cutting and squaring of wooden panels, MDF, chipboard, plywood, and other compatible wood-based materials. Rcsdps Ad I T Uefx Akieh Main Features and Technical Specifications Manufacturer: GRIGGIO Model: UNICA 400 Year of manufacture: 2014 Machine type: Professional sliding table panel saw Sliding table length: 2200 mm Power supply: Three-phase, 400 V – 50 Hz Rated current: 15 A CE marked Tilting circular saw blade from 0° to 45° Electronic adjustments with digital displays Aluminium sliding carriage with crosscut fence Rip fence and adjustable positioning stops Workpiece clamping system and hold-down devices Overhead saw blade guard with dust extraction connection Front control panel with emergency stop button Scoring saw unit visible on the machine

Condition: good (used), Year of construction: 2009, functionality: fully functional, Cutting length: 4,200 mm Cutting width: 4,200 mm Max. saw blade overhang: 82 mm Max. cutting height: 72 mm Main saw motor power: 11 kW Max. diameter of main saw blade: 300 mm Scoring saw motor power: 1.1 kW Diameter of scoring saw blade: 180 mm Cutting height adjustment: 3-stage Rjds Afxyzopfx Akioch 3 pcs. air cushion tables, 2 of which are mobile Angle clamping device 6 pcs. material clamping fingers Control system: Based on WINDOWS PC Barcode printer available, but not in operation due to the lack of cutting plan optimization.

Condition: good (used), Year of construction: 2001, Max. panel size: 5600 x 2700 mm Rodpjzzpg Hofx Akiech Saw motor: 18 kW Installation dimensions: 8539 x 13190 mm Max. panel thickness: 40 mm Max. stroke thickness: 110 mm

Condition: used, Year of construction: 2005, We offer this used Mayer PS 2 Z control unit, year 2005. Panel saw with a cutting range of 6150 mm. Equipped with a 145 mm scoring saw. Front rotary table included. The machine has been dismantled and is in storage. Manufacturer: Otto Mayer Maschinenfabrik GmbH Model: PS 2 Z Serial number: 0359-00-5800 Year of manufacture: 2005 Condition: used If you have any questions or require more information, feel free to send us a message or call us. Rodpfx Aksx N Ua Doiech