Used Injection 2000 T for sale (21,821)

Condition: excellent (used), CTS Type: T-40/2000 Prsdpfsup T Uqjx Aa Ejf Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 2,300 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 14,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI type: KM 250-2000 CX controller: MC5 year of construction: 2008 operation hours: 17745 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Pedpsxwvdwefx Aa Eorf Y axis: 1400 mm Z axis: 2000 mm total weight: 395 kg

Condition: good (used), Year of construction: 2004, operating hours: 29,461 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, injection weight: 140 g, For sale: a well-maintained Arburg 570C-2000-350 2K injection moulding machine from 2004, with only approximately 30,000 operating hours. The machine is in good technical condition and is immediately ready for production. Specifications: Model: Arburg 570C Psdpfx Aexyyxqea Ejrf Clamping force: 2000 kN Screw diameter: 35 mm (350) Year of manufacture: 2004 Operating hours: approx. 30,000 Control system: Arburg Selogica Configuration: Standard injection moulding setup, reliable and versatile Condition & Maintenance Machine always serviced as per schedule No significant fault history Clean and fully functioning hydraulic and electrical system Extras (optional) Other screw sizes available.

Condition: excellent (used), Year of construction: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of Manufacture: 2011 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosing volume: 392 cc Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping unit: toggle lever Control System: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valves x 4 Hydraulic core pull x 2 Controller with 12 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor driven by inverter – energy saving Injection unit driven by a servo motor, controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication system Parallel motions Arburg Multilift Select robot, 6 kg transverse Year of manufacture: 03.2011 4-axis robot: 3 axes driven electrically by servo motors; C-axis pneumatic Travel distance in axes: X-400, Y-800, Z-1400 Pjdpfx Aajx Nhplo Eerf Robot with adapter, conveyor belt, and safety enclosure The purchase of the robot and conveyor belt is available for an additional charge Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward Psdpfxov D Nxlj Aa Eerf 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: ready for operation (used), functionality: fully functional, clamping force: 800 kN, clearance between the columns: 1,200 mm, ARBURG 1200 T 800-150 MACHINE DETAILS Operating Hours Machine Cycles: 2,426,431 Pump Operating Hours: 38,226 h Automatic Operation Hours: 30,517 h FTP ATR-25 Q Prjdpfxsx Af S Uj Aa Eef MACHINE DETAILS Weight: 1,400 kg Note: Further information regarding the machine configuration can be found in the attached document.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) Podpfx Aaowugczo Esrf 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 193818, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, injection pressure: 2,080 bar, injection weight: 297 g, ejector stroke: 225 mm, opening stroke: 650 mm, plate width: 685 mm, plate height: 685 mm, installation height: 250 mm, total length: 5,500 mm, total width: 1,600 mm, total height: 2,160 mm, overall weight: 6,630 kg, number of injections: 1, input current: 125 A, Equipment: documentation/manual, All items are sold as used and untested unless otherwise specified. Only the injection moulding machine is offered for sale, without handling device or accessories. Please pay attention to the item description. Prodpfoxy Iugjx Aa Ejf

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Application Types Prjdpfx Aajx D Rq Eo Eef Injection Moulding

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Prjdpfx Aaex Nhn Us Ejf Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 2000, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 80 mm, Year of manufacture: 2000 Clamping force: 400 tons Platen size: 1300 x 1080 mm Minimum mould height: 350 mm Distance between platens: 1500 mm Screw diameter: 80 mm Injection volume: 1558 cc Additionally (optional): VIPER 40 robot Manufacturer: Engel Year of manufacture: 2014 Prsdpsx A S S Iefx Aa Eof

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket Pjdpfxew Tt R Is Aa Esrf - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: good (used), Offer 25348 Technical Specifications: Pjdpjxu Evwjfx Aa Eerf - Plate length approx. 5500 mm - Plate width approx. 2000 mm - Plate height approx. 350 mm - Thickness of top plate approx. 80 mm - 8 pcs. T-slots in table surface, length 5500 mm - Center distance between T-slots in table surface: 255 mm each - Center distance of T-slots from outer edge: 110 mm - T-slot width approx. 40 / 60 mm - T-slot depth approx. 62 mm - Required space: L 5600 x W 2020 x H 350 mm - Weight approx. 10,200 kg

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm closing force max.: 2000/ bei 175 bar kN opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 system pressure: 175 bar injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm force of ejector: 120 kN opening stroke: 550 mm daylight: 700 mm total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C Prjdpeu Nu N Rsfx Aa Eof The machine is not connected. We sell the machine as described and as is *

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Clamping Unit: Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. Prsdsxzklqjpfx Aa Eof T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Predpjx Nhfaofx Aa Eef Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 2006, clamping force: 800 kN, Total connected load 21.7 kW Pump motor 18.50 KW Prjdpovu Dncofx Aa Ejf Weight 7,400 KG

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight Prodpfx Askwcdboa Eef 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, Injection moulding machine Arburg 570C 2000 150/60 2 K, year of manufacture: 2007 Control: Selogica Clamping force [kN]: 2000 Screw diameter: 25 / 12+15 Prsdpfsw D R S Eex Aa Eof Core pull: 1 Integrated hot runner zones: 15 Total power [kW]: 44.3 Opening stroke [mm]: 650 Selector unit: no Max. mould height [mm]: Min. mould height [mm]: 300 Specific injection pressure [bar]: 2500 Max. shot weight [g for PS]: 49 Tie bar spacing [mm x mm]: 570/570

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, surface plate, marking plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate -Manufacturer: Planolith, granite measuring plate hard stone measuring plate -Size: 2000 x 1500 mm -Accuracy grade: O (< 0.012 mm) -T-slot: width 14 mm Prodpfjub D Rljx Aa Eof -Dimensions: 2020/1520/H256 mm -Weight: 2360 kg

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / production line with robot Wemo 6-5 xDesign, conveyor Wemo WCS-R and contactor housing / machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 45 mm injection weight: 215 g Injection pressure: 1984 bar Metering volume: 226 ccm Clamping unit : clamping force: 150 t tie bar distance: 510x510 mm size of clamping platens: 740x740 mm ejector: hydraulic clamping unit: toggle lever control: B&R - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Pjdpex Ng Tcefx Aa Esrf Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control unit x 36 (for additional payment) Injection unit is wear resistant and resistant to corrosion Main machine motor - servo motor driven by inverter Central lubrication Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Robot Wemo 6-5 xDesign Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric) The safety package for robots Robot with adapter, conveyor belt Wemo WCS-R and contactor housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 7500 kg Length/width/height: 6.10x1.97x2.60 m Drive: Pumps/motor: 11,5 kW Heating power: 11,3 kW Total power: 22,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-grooved plate comes from: from a milling machine -Travel: approx. 1200 mm -Width: 700 mm Podeduiwwopfx Aa Eorf -Length: 2000 mm -Height: 510 mm -Plate thickness: mm -Table height: mm -Plate: is solid -Groove width: mm -Dimensions: 3030/850/H510 mm -Weight: approx. 1200 kg

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Prsdsx Ngxlopfx Aa Esf Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Clamping plate with T slots, plate field, welding table, welding table, plate boring machine Pjdpfx Aocfyghea Eorf -Width: 2005 mm -Length: 2000 mm -Height: 210 mm -Plate thickness: 120 mm -Plate: with support ribs -Groove width: 28 mm -Dimensions: 2000/2005/H210 mm -Weight: 2700 kg

Condition: excellent (used), Year of construction: 2006, LWB STEINL VCRS-T 300/36 T / Machine like new Year of construction: 2006 Injection unit: Metering volume: 36 ccm Clamping unit : clamping force: 30 t Ejector: hydraulic Clamping unit: hydraulic Control system: LWB ECO Additional equipment: Hydraulic core pull x 1 Control unit with air valve The injection unit is made of bimetal Dimensions: Weight: 3000 kg Pjdpfx Aox Ngwhja Esrf All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request