Used Horizontal Machine Center for sale (70,106)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Model: SH-50 Serial number: 450 The machine is still under power and available at short notice. • P8 Power Supply worth €1,500 was newly replaced in August 2024 • The spindle was repaired in 2017 and, since then, has mostly been used in single-shift operation, as we primarily produce single parts and small batches. For this reason, the machine has spent most of its time being set up. • Machine: Milling machine Mori Seiki SH50 • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Configuration: Horizontal milling machine with indexing table • Tool capacity: 60 (BT40) Redpfjyt Nnpsx Acver • Number of pallets: 2 (500mm x 500mm) • Travels: X630mm / Y600mm / Z650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse speed of the X axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring on the pallet changer is likely defective, leading to oil leakage. As a temporary fix, we installed a ball valve in between; when we need to change pallets (which is not very often), we open it manually. The machine is sold as viewed, without any guarantee or warranty. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. If you have any questions or need further information, please feel free to write us a message or call us.

Condition: used, Year of construction: 2008, functionality: fully functional, Number of axes: 4 X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Rsdpfx Ajyd Rw Tocvor Max. tool weight: 8 kg Spindle power: 22 kW Spindle speed: 12,000 RPM Further technical details upon request

Condition: good (used), Year of construction: 1973, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 860 mm, Oerlikon milling machine, lightly used, only employed for punch tool repairs. Guide columns are like new, showing no signs of wear! Highly precise, equipped with FAGOR CNC control. Suitable for workpiece weights up to 3000 kg. Rsdpfeyk Uwqex Acver

Condition: used, Year of construction: 2010, x-travel 1.100 mm y-travel 900 mm z-travel 1.250 mm control SIN 840 D Redpfxsymfzrj Acvor spindle turning speed - gearbox stage 1 20 - 1.333 1/min. spindle turning speed - gearbox stage 2 1.333 - 8.000 1/min. power capacity at 60% / 100 % load 50 / 37 KW tool taper SK50 B - axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 500 U/min feed X/Y/Z/-axis 1 - 60.000 mm/min rapid traverse 60 m/min feed capacity X/Y/Z 17 kN numbers of pallets 2 pallet size 800 x 800 mm table load 1,50 t tool magacine with 120 Plätzen tool length - max. 600 mm tool diameter 135 mm wotkpiece diameter with 2 vacant positions 350 mm weight of tools max. 60 kg total power requirement 150,00 kW weight of the machine ca. 35,00 t dimensions of the machine ca. 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation; Pallett-changer with 2 palletts and hydr. chuck Forkardt 3KS1000, Coolant unit KNOLL; Coolant through spindle (30 l/min 50bar);

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 600 mm, FOR SALE — Soenen Hendrik CNC Machining Line for Aluminum Window & Door Profiles A Soenen Hendrik aluminum CNC processing line, fully operational and available for demonstration. Offered due to replacement by an in-house developed CNC system. Key Features ✔ Fully operational and available for on-site demonstration ✔ Automated profile handling: infeed and outfeed transport ✔ Capable of processing up to 20 profiles consecutively without manual intervention ✔ Equipped with 18 milling spindles: • 5 upper and lower (including 1 angled spindle) • 4 front and rear spindles ✔ 600 mm saw with adjustable cutting angle (22°–158°) ✔ Slot milling unit — ideal for T-profiles, mullions, etc. ✔ Automatic label application on finished profiles ✔ Compatible with UniLink for machine control Rodpfox Dcnpjx Acver ✔ Outfeed conveyor for scrap/waste removal ✔ Includes UPS emergency power supply ✔ Integrated cameras for process monitoring This machine is an ideal solution for manufacturers looking for automated CNC processing with high throughput and minimal operator involvement. Contact us for pricing, inspection, or additional technical information.

Condition: used, Year of construction: 2006, Empty weight: 4.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-05-25 - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of milling spindles [pcs.]: 1 Rjdex Hfikspfx Acver - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: Xilog plus - Safety feature: Safety mat - Vacuum pump present: Yes - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor, Manual control - Table length [mm]: 3050 - Table width [mm]: 1240 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 3500 - Y-axis maximum stroke [mm]: 1815 - Z-axis maximum stroke [mm]: 440 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. TECHNICAL DETAILS Rodpfx Ajx Exvzocver Travel X-axis: 730 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Filtermist FX5000 emulsion extraction unit Renishaw OMP60 3D probe Chip conveyor Spindle chiller Documentation + circuit diagrams

Condition: good (used), Year of construction: 2005, operating hours: 40,403 h, functionality: fully functional, Deckel Maho DMC 80H duo Block About the Machine: Extremely robust machine. Technical Specifications: - Control: Siemens 840D - Travel paths X, Y, Z axes: 800/800/800 mm - Travel path C axis: 360° - Clamping surface rotary table: 800 x 630 mm - Rapid traverse: 60 m/min - Spindle speed: 20 - 12000 rpm - Tool holder: SK50 - Tool magazine with 60 positions - Network connectivity - Automation interface available Equipment: - Internal coolant supply 50 bar with belt filter system - Work area rinsing system - Rinsing gun - Chip conveyor Inspection/Test under power at our facility is of course possible. We are pleased to offer transport, installation and commissioning at your location. Everything from a single source: Rjdpfxjyhwrce Acvjr We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and other renowned manufacturers. We support you! From machine purchase, transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: excellent (used), Year of construction: 2007, operating hours: 32,947 h, functionality: fully functional, Deckel Maho DMC 100H duo Block About the machine: Very robust machine. The main spindle was renewed in 2023. Technical Data: - Control: Siemens 840D - Travel range X, Y, Z axis: 1000/1000/1000mm - C-axis travel range: 360° - Clamping surface rotary table: 800x800mm - Rapid traverse: 60 m/min - Spindle speed: 20-12,000 rpm - Tool holder: SK50 - Tool magazine with 60 slots - Network connectivity - Automation interface possible Equipment: - Through-spindle coolant 50 bar with belt filter system - Work area flushing - Rinse gun - Chip conveyor An inspection or test under power on site is of course possible. We are happy to offer you transportation, installation, and commissioning of the machine at your site. All from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance Redoyhwqmepfx Acvjr - Overhaul - Automation of DMG machines and those of other renowned manufacturers. We support you! From purchasing your machine, through transport and installation, to commissioning and subsequent maintenance or repair work—you can count on us.

Condition: excellent (used), Year of construction: 2017, operating hours: 6,473 h, functionality: fully functional, machine/vehicle number: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Available immediately. Technical Data: - Control: Siemens 840D - Travel X-, Y-, Z-Axis: 730/730/880 mm - C-Axis Travel: 360° - Rotary Table Clamping Surface: 500x500 mm - Spindle Speed: 20-15,000 rpm - Tool Interface: SK40 - Tool Magazine with 60 positions - Pallet changer with 2 stations - Automation-ready Equipment: - Internal cooling, 70 bar with belt filter system - Work area rinsing - BLUM measuring probe Redpfxjyhwpws Acvsr - Rinse gun - Chip conveyor - Signal light - Handheld control device Inspection / test under power on site can be arranged by appointment. We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH specialize in: - Service - Maintenance - Overhauling - Automation for DMG machines and other renowned manufacturers. We accompany you—from the machine purchase, through transport and installation, all the way to commissioning and ongoing maintenance or repair work. You can rely on us.

Condition: used, Technical details: x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm speeds:: 6000 U/min table:: 500 x 630 mm with tool changer: 40 Plätze spindle taper:: SK 50 total power requirement: 25 kW Redox A Sziepfx Acvsr weight of the machine ca.: 11500 kg

Condition: used, Year of construction: 2019, Two Heckert H55 4-axis machining centers for sale. Travel distances: x: 700 mm, y: 750 mm, z: 780 mm. Machine dimensions: length: 7060 mm, width: 3030 mm, height: 3835 mm, weight: 10,900 kg. Rsdpfx Asw D Hhcecvor

Condition: used, Year of construction: 2014, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Rodpfox Sq Uvex Acvsr Through-spindle coolant (IKZ)

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Redpfx Acjv N Di Aever Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: excellent (used), Year of construction: 2008, CNC Horizontal Machining Center MAZAK HCN 5000 II Year of manufacture: 2008/10 Tool magazine: 40 tools Spindle speed: 18,000 rpm NC rotary table (fourth axis / 0.001 x 360,000 positions) Technical Specifications: Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Distance from spindle center to pallet center, min.: 70 mm Distance from spindle center to pallet center, max.: 810 mm Distance from spindle center to pallet surface, min.: 100 mm Distance from spindle center to pallet surface, max.: 830 mm Tool holder: SK40 Tool magazine: 40 tools Spindle speed: 18,000 rpm Redjx Hgh Iepfx Acvjr Pallet working area: 500 x 500 mm NC rotary table (fourth axis / 0.001 x 360,000 positions)

Condition: excellent (used), Year of construction: 1999, CNC horizontal machining center DECKEL MAHO DMC 60 H SIEMENS CONTROL Year of manufacture: 1999 Technical data: X-axis: 600mm Y-axis: 560mm Z-axis: 560mm B-axis: 360° Pallet: Redpfsvn Ra Sex Acvor Number: 2 Size: 400x500mm Permissible load: 600kg Weight: 10,500kg

Condition: excellent (used), Year of construction: 2005, TECHNICAL DETAILS Travel (X-axis): 750 mm Travel (Z-axis): 800 mm Travel (Y-axis): 850 mm Magazine Positions: 120 Spindle Speed Range: 50–15,000 rpm Spindle Diameter (Front Bearing I.D.): 80 mm Spindle Taper: ISO R297 / Taper No. 40 Tool Holder: MAS I Type P40T Table Pallet Size: 550 × 550 mm Max. Rotary Table Swivel Range: 360° Pallet Height: 750 mm Distances Distance Between Spindle Nose and Table Center: 150–1,000 mm Distance Between Spindle Nose and Table Surface: 50–850 mm Feed Rates Rapid Traverse X-, Y-, Z-Axis: 60,000 mm/min Cutting Feed Rate (X-, Y-, Z-Axis): 0.001–30 mm/min Tool Changer (ATC) Number of Tools: 40 Tool Size (Ø × Length): Ø75 × 470 mm Tool Weight: 8.0 kg Tool Change Time (Tool to Tool): 1.3 s Rjdpfexywtlsx Acvjr Performance Data Positioning Accuracy (X-, Y-, Z-Axis): ±0.003 mm Repeatability (X-, Y-, Z-Axis): ±0.0015 mm Pallet Load Capacity: 800 kg Thrust Force: 9,800 N MACHINE DETAILS Control: FANUC Series 30i Space Requirements & Weight Footprint: 2,750 × 5,700 mm Machine Weight: 16,000 kg Motors Spindle Drive Motor (15 min rated power): 22 / 18.5 kW Hydraulic Pump Motor: 3.7 (4) kW Operating Hours Machine Running Hours: 12,976 h Control Powered Hours: 112,997 h

Condition: used, Year of construction: 2009, Technical details: Redpfx Acswdyyfjvsr x-travel: 630 mm y-travel: 630 mm z-travel: 500 mm number of spindle speeds: spindle motor: 32 kW size of pallet: 500 x 500 mm b-axis: 36000 x 0,001 ° no. of workpieces in the magazine: 61 Stück tool taper: HSK 63 weight of the machine ca.: 15 t Single-Spindle Mechanical processing cylinder head VR6 *

Condition: used, Year of construction: 1999, Technical details: x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 15,2 t Tool bore: SK50 Tool taper: HSK-A 100 turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Rodowdywqepfx Acvsr Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: used, Year of construction: 2002, Technical details: x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 20 t dimensions of the machine ca.: 6,80 x 3,0 x 3,20 m Tool bore: SK50 Tool taper: HSK-A 100 turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to Rsdpfxow T Tnto Acvsr *

Condition: used, Year of construction: 2003, Technical details: x-travel: 450 mm y-travel: 450 mm z-travel: 450 mm weight of the machine ca.: 14 t size of pallet: 320 x 320 mm number of spindles: 2 Double spindle 4-axis machining center Horizontal Rodpjw Ng D Hefx Acver 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed ??increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 bar / 1500I / VF 250 Coolant Cooler Working space flushing Emulsion mist suction Roto - Clear Automatic setup process Automatic disarming process Runtime and quantity recording Status lamp 3-color modem for remote diagnosis control cabinet lighting *

Condition: used, Year of construction: 2002, Technical details: spindle speed:: max. 12000 tool taper: HSK 80 . b-axis: 360 x 0,001 ° worktool support (A-axis): ° weight of the machine ca.: 25 500 Kgs. Rsdpfx Acjwdywdevjr x-travel: 800 mm y-travel: 700 mm z-travel: 630 mm dimensions of the machine ca.: 6200 x 3000 x 3200 mm pallet size:: 500 x 500 mm no. of tools in the magazine: 61 Nos. Weight approx.: 23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle *

Condition: used, Year of construction: 2007, Technical details: weight of the machine ca.: 11,2 t Rsdpfxewi Nige Acvor one spindle *

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 980 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 8,000 rpm, spindle nose: ISO 50, number of spindles: 240, CNC MSX 701 III Travels (X/Y/Z axes): 900 / 800 / 980 mm Rjdpfsykpg Hjx Acvor Pallet working surface: 630 x 630 mm Pallet load capacity: 1,200 kg High-torque spindle max speed: 8,000 rpm Rapid traverse rate (X, Y, Z): 50 m/min Tool magazine capacity: 240 tools Spindle motor power (30 min / continuous): 37 / 30 kW Machine Configuration: 240-position RACK tool magazine Spindle taper DIN 69871 – ISO 50 Tool breakage detection in magazine Index table with 1° indexing FASTEMS interface, model MLS-MD Spindle speed 8,000 rpm – 37/30 kW TOOL IC SYSTEM BALLUFF interface No. 600 macro variables No. 1 load monitor No. 200 storable programs No. 512 tool life management No. 999 tool offsets No. 48 workpiece coordinate systems Data server + ATA card Mori Seiki scraper-type chip conveyor with drum filter MARPOSS application, model MIDA T25G, with E86N radio transmission system META pumping unit, model M 50/50, partial filtration system, 50 bar high pressure COMET drilled pallet Instruction manuals and CE Declaration of Conformity

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Table Size (254 x 254mm) 10″ x 10″ Travel (X, Y, Z) (305 x 305 x 330mm) 12″ x 12″ x 13″ Spindle Taper NST No. 30 Spindle Speed 150~15,000rpm 30,000 Option Tool Storage Capacity 40 Pcs.- Expandable in the Field to 102 Tools! Tool Change Time (T-T/C-C) 1.2 Sec. /2.8 Sec. Rsdpfxeyhgd Rj Acver Rapid Feed (X,Y,Z) 2,362ipm (60m/min) Rapid Feed (B) 108,000deg./min. (300rpm) Power Requirement 30KVA