Used Homag Kal for sale (491)

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control Bsdpfjztl Scox Ac Tedg - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2012, PUR retrofit 2023 / EasyPUR AC-34 / RIEPE spraying system LP289/99 24 V. Retrofit including 2x spare glue reservoirs. Output approximately 15,000 - 20,000 linear meters per year. Annual maintenance by HOMAG. Feed rate: 28-25 m/min; with FK 11 max. 20 m/min. Working height: approx. 950 mm. Machine length: approx. 7845 mm. Workpiece thickness: 12-40 mm standard; up to 60 mm available. Edge material roll: approx. 0.3-3 mm. Edge material strip: approx. 0.4-6 mm. Roll diameter: max. 830 mm. Pneumatics: 6 bar. Electrical: 400 V / 230 V, 3 phases, 50 Hz. Equipment: Release agent spraying unit top / bottom. Joint milling unit. Glue application unit. 2-roll edge magazine. Pressing zone. Cutting unit HL 81. Pre-milling unit BF 10. Profile milling unit FK 11. Trimming blade PN 10. Finishing unit with glue joint trimming blade and buffing unit. Preparation for HOMAG laserTex powerControl PC 22 with touchscreen. Automation packages. Trimming blades for 2mm as well as for 1 mm edges. Bdjdpfx Acozxf Sye Tsg Location: Customer.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges Bdedpfszuyhhox Ac Teg With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, Year of construction: 2009, - Edge trimming mills - Gluing unit for EVA hot melt adhesive - Pressure zone - Cutting unit - Copy milling - Pull blades - Deburring unit Edge banding machine Manufacturer: Homag Type: KAL 330/6/A3/S2 Year of manufacture: 2009 Technical data Bdodpfx Aezuyhzsc Tsg - Edge trimming mills - Gluing unit for EVA hot melt adhesive - Pressure zone - Cutting unit - Copy milling - Pull blades - Deburring unit Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 0-200-01-2196, functionality: fully functional, input current: 63 A, height adjustment type: electric, feed rate X-axis: 25 m/min, actuation type: electric, total height: 2,000 mm, total length: 7,850 mm, total width: 2,300 mm, overall weight: 5,000 kg, Equipment: CE marking, documentation/manual, Edge banding machine, good working condition, fully electric adjustments, working speed 25m/min, available immediately. Bdodpfsy Ebl Sex Ac Tsg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Bedpoyzxa Esfx Ac Tedg Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: used, Year of construction: 2016, functionality: fully functional, We present a fully automatic EDGEBANDING LINE for sale! The line can be inspected in production at any time and is available immediately! HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL330/9/A3/WZ, year 2013 HOMAG FEEDING TABLE FLEXLINE PROFI TBL100/20/30/F, year 2013 HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL370/8/A3/WZ, year 2016 HOMAG DOUBLE ANGULAR TRANSFER CROSSWISE POWER TWL410/25/LQ, year 2016 PROFI KAL330 - Free Space Jointing Trimming Unit - Gluing Part A3 Basic - Free Space Processing Units - Finishing Unit FA11 Workpiece and edge parameters: - Workpiece width without edge min: in case of workpiece 60 mm* Thickness 12-22 mm in case of workpiece Thickness 23-60 mm 100 mm* *depends on the workpiece length. - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm Thickness - Edging material on coil 0,3-3 mm - Edging mat. cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter 830 mm PROFI TBL100/20/30/F Fixed stop side on the left - incl. transport rollers - roller diameter 54 mm - roller distance approx. 60 mm - incl. lateral conveyor belt - electro pneumatically controlled crosswise fence - adjustable infeed fence, manually via counter - incl. kit for small parts - incl. integrated air cushion table Workpiece parameters: - Panel length: min. 240 mm/ max. 2500 mm - Panel width: min. 120 mm/ max. (TBL../20/30) 3000 mm PROFI KAL370 - Free space Jointing Trimming unit - Gluing part A3 basic - Free space processing units - Finishing unit FA21 Workpiece and edge parameters: Workpiece width without edge min: in case of workpiece 60 mm* (thickness 12-22 mm) in case of workpiece 100 mm* (thickness 23-60 m) *depends on the workpiece length - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm thickness - Edging material on coil 0,3-3 mm - Edging mat.cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter max. ¦ 830 mm POWER TWL410/25/LQ - Fixed stop side infeed: left, outfeed: left Bdsdpfx Acey Thlzo Teg - Roller diameter 64 mm - Roller distance 110 mm - Infeed roller track with belt conveyor and cross transport - Cross conveyor belt controlled - Outfeed roller track - Cross conveyor belt controlled - Stop fence electro pneumatically controlled - Transport belt lateral - Modification of panel overhang manually adjustable Workpiece parameters: - Panel length min. 240 mm/ max. (TDL../25/..) 2500 mm - Panel width min. 240 mm - Panel thickness min. 8 mm/ max. 60 mm - Panel weight max. 80 kg

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Bdjdoztpw Nopfx Ac Tjg Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, trimming units, milling units, Bdjdpfxezkmqzj Ac Tog rounding units, sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Bdodpfsztazfsx Ac Tjg Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming Bdedpezux R Ijfx Ac Tsg - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: excellent (used), A) SINGLE SIDE EDGE BANDER (Left) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 20 Panels thickness (min/max) mm 8 - 60 Numerical Control POWER Control PC 22 Bedpfx Acezx Eh Is Tjdg Spraying unit (Antisticking liquid) Infeed fence, adjustable by N.C. Panels infeed system Pre-milling Unit (vertical joint trimmers) adjustable by N.C. type KAL 300 (Kw 3 x 2) Glueing Unit (P.U.R. Glue + Quick Melt unit) PU 34 / QA 34 Band Pressure zone (adjustable by N.C.) "C" Edge coils supporting unit, N° 6 reels Snipping (endcutting) unit HL 86 Servo (Kw 0,4 x 2) 35 m/min Rough Trimming unit Optimat (Kw 1,5 x 2) Fine Trimming unit ALUKANTE (Kw 0,4 x 2) adjustable by N.C. Spraying Unit (for sliding liquid) Multi Function Unit (Profile contour Trimming unit) FK 13 Servo (Kw 0,4 x 2) Profile edge scraping unit (Multiprofile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid) B) Workpieces Return system "LIGMATECH" ZHR 05/L/095

Condition: good (used), Year of construction: 2012, overall weight: 3,000 kg, year of last overhaul: 2025, Equipment: CE marking, - HOMAG KAL211 EDITION 2264 Year of manufacture: 2012 OVERVIEW OF AGGREGATE CONFIGURATION: - Control: powerControl PC22 - Top pressure with composite V-belt - Feed rate: 18 - 25 m/min - Workpiece thickness: 60 mm instead of 40 mm - Total length: 7845 mm - Electronic height adjustment FPR/L260+EDITION+FSQ - Quick-clamp system for application unit QA/PU Bjdeyz Dbbspfx Ac Tedg - Separator spraying unit above/below - Jointing milling unit - Gluing station A20 with Quickmelt application unit - Magazine 2 manual, 2 rolls - Preparation for Lasertec activation unit - End trimming unit HL84 chamfer/straight - Automation package chamfer/radius AMB/EDITION2264/74 - Pre-milling unit BF10 1.5 kW - Contour milling unit FK11 manual - Profile scraper PN10 - Finishing unit - Glue joint scraper - Buffing unit - Drying box with nitrogen

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg Price: On request - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit Bedpfx Aceyrp Uao Todg - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, 1. Edge banding machine Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2010 Technical data Release agent spraying system Joint milling unit (2 x 4 kW) Glue application A20 (granule/quick-melt system) Pressure zone with driven pressure rollers Miter saw HL84 (2 motors) Flush-/radius-/chamfer milling unit BF10/BF20 Corner copying unit FK11 (2 motors) Profile drawing blade PN10 Straight drawing blade for glue joint Buffing unit (polishing) Release agent and cleaning agent spraying system at the outfeed Bdodpezuyilsfx Ac Tsg Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05 Bedpsx A Hi Iefx Ac Tsdg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Bedpfxezdzmke Ac Tsdg Transport packages: 5 EQUIPMENT CE marking

Condition: used, Year of construction: 2007, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, Weight: 4.000 kg Price: On request - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes Bodpfx Aeyzp Aksc Tedg - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: No - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 46 - Fuse [A]: 63 - Transport dimensions: 7500mm x 1500mm x 2200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, Colour: Grey - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes Bdjdsx Ei Syjpfx Ac Tog - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Bsdpozku Rpofx Ac Tedg Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: used, machine/vehicle number: 006042, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 40 mm Operating Units: 9 nr Bdedjwacqlepfx Ac Tjg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, edge thickness (max.): 20 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit Bdedpfx Acsxg Ix Sj Tog - HOMAG FA 11 finishing unit

Condition: excellent (used), 203018) SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 203019) Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head) Bdjdeyyvp Uspfx Ac Teg

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2474, year 2015: Bodpfx Acoxnb Uvo Tjdg Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank + AirTec System Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 + multiradius scrapers servomotorical adjustable Glue scrapers servomotorical adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Entry magazine for two bands in rolls automatic Working thickness adjustment servomotorical driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 25m/min. Total length including feeding plate 8365mm Kilometerstatus 1.166.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, edge thickness (max.): 20 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS Bdedpfxexzfwbe Ac Tjg - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit