Used Holzma Optimat for sale (66)

Condition: ready for operation (used), Year of construction: 2015, For sale: Holzma OPTIMAT HPP 300/43/32/L panel saw – in very good condition We are offering this well-maintained and exceptionally clean Holzma OPTIMAT panel saw. The machine was purchased new by us and has always been used and serviced with great care. All relevant documentation and manuals are included. Additionally, the machine comes equipped with an optimization package, a grooving package, and a cutting package, making it highly versatile and fully equipped for professional use. With only 7,000 operating hours, the machine is in excellent condition and ready for immediate use. The machine can be viewed in operation at our workshop, allowing you to see its performance first-hand. Please note: the machine must be dismantled in week 18. Dcedpfx Aceyywz Eevjf Specifications: • Manufacturer: Holzma • Model: OPTIMAT HPP 300/43/32/L • Year of manufacture: 2015 • Condition: very good • Operating hours: 7,000 If you are interested or require more information, please feel free to contact us.

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Max. panel length: 3800 mm Dcedpfx Aoygtbtocvof Main saw blade projection: 55 mm No of Grippers: 4

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Dcedpfjyuya Esx Acvsf Max. cutting length: 1,600 mm Min. cutting width: 4,300 mm MACHINE DETAILS Number of transport packages: 8 pcs. Year of manufacture: 2016

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Max. panel length: 4300 mm Dcedpfox A Tamox Acvjf Main saw blade projection: 125 mm No of Grippers: 7

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Dcsdoyw Ivhspfx Acvof Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Dcodpfx Acjvnq H Esvef Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: ready for operation (used), Year of construction: 2011, This HOLZMA PROFI HQP 11/16/56/L/X was manufactured in 2011. It is an optimizing cross-cut saw designed for precision and efficiency in wood processing. Ideal for businesses aiming to enhance their woodworking capabilities. Contact us for more information. Machine Benefits Technical Machine Benefits Dodoyaii Hjpfx Acvecf • Cross cutting aggregate • Cutting length: 1600 mm • Depth cutting aggregate • Cutting length: 5600 mm • Vacuum feeding device – for precise and automated material handling • Outfeed roller conveyor – ensures smooth transfer of cut parts Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, controller model: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us. Additional equipment • Air cushion table with roller element 2160 x 650 mm: 4 pieces • Central blower: 1 piece Machine Benefits Qualitative Machine Benefits • Ce-certified, gs-certified, fph wood dust certified • Division: 75/275/475/1050/1850/2650/3450 mm measured from the angle rule to the center of the clamping collet • 2 additional two-fingered clamping collets possible • 4 manual trimming rakes at clamping collets • 1 additional one-fingered clamping collet possible • Jet spacing of air cushion tables: 70 x 70 mm Technical Machine Benefits • Pre-cut saw motor: 2. 2 kw • Operating voltage: 400 v / 50 hz • Electrical connection value at hs motor: 18. 0 kw = 24 kw, 21. 0 kw = 27 kw • Positioning accuracy: +/- 0. 1 mm/m • Surface-friendly material transport, lifetime positioning accuracy, no lubrication required, high program slider speed, maintenance-free, full stability of the steel table maintained, easy, cost-effective replacement of phenolic resin plates, minimal wear of the cylinders, uniform pressure application, minimal cutting = scratch cut, significant cycle time savings, top cutting quality, minimal setup times, reduction of cycle time, pressure strength electrically adjustable • Cutting length: 4300 mm Dcjdpfx Acoyaiiysvef • Cutting width (program slider travel): 4250 mm • Roller track (element 10-track): 1 piece • Roller track (element 2-track): 5 pieces • Clamping collets: 7 pieces (first 3 pieces two-fingered, all others one-fingered) Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Technical specifications: Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104 Dedpfjymx S Djx Acvscf

Year of construction: 2000, condition: ready for operation (used), Technical Specification Max. Cutting Length 3300 mm This HOLZMA HPL 23/X/33/22/30/L was manufactured in 2000. A robust used panel saw featuring a cutting length of 3300 mm, 3 air cushion tables, and a lifting table measuring 3300 x 2200 mm. It includes a main saw with 18 kW power and a scoring saw of 2.2 kW, controlled by a CADMATIC system. Contact us for more information about this machine. Application Types Sawing (Wood) Dcsdpfx Acex D Hlfsvof

Condition: excellent (used), Year of construction: 2007, Panel Divider Saw Manufacturer: HOLZMA Type: PROFI HPP 380/43/43 Year of Manufacture: 2007 Dimensions: approx. 13,000 x 6,540 x 2,100 mm Features: - Total power: 20.0 kW - Can be combined with an automatic material feeder - Maximum cutting length: 4,300 mm - Maximum program slide travel: approx. 10,000 mm - Sawblade projection: 95 mm - Sawblade diameter: 380 mm - Main saw power: 13.5 kW - Automatic cutting height adjustment - Scoring unit or postforming unit - Scoring blade diameter: 180 mm - Scoring unit power: 2.2 kW - Saw carriage feed speed: 5 – 130 m/min - Saw carriage adjustment: Continuously adjustable - Program slide feed: 1-25 m/min - Angle clamping device - Number of collets: 7 - Collet opening width: 95 mm - Lifting device for raising the collets - Collet lifting height: 290 mm - Automatic labeling - Label printer - 90° turntable for max. 4,300 x 2,200 mm sheets - Schuler MDE software for user data acquisition and analysis Dcjdpev N D E Rofx Acvjf - Pivoting control panel The machine is still in operation and can be inspected. Available from the beginning of August 2025. Location: Sauerland

Condition: used, machine/vehicle number: 008001, Max. panel width: 4300 mm Dcjdpfx Aswuz Tbjcvjf Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 8

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, controller model: POWERCONTROL, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Dcjdpfx Ajyttqzecvof Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade projection: 125 mm Maximum feed speed: 80 m/min Saw Unit Maximum tool diameter: 450 mm Motor power: 13.5 kW Engraving Unit Maximum tool diameter: 180 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Processing table Number of lift table levels: 4 Number of clamping devices: 10 The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External Reference: 5552

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting dimensions 4300x4300 mm Cutting height 95 mm Beam feed with grippers 90 m/min Cutting speed up to 150 m/min, steplessly adjustable Main motor power 13.5 kW Scoring saw motor power 2.2 kW Saw blade diameter 350 mm 4 air tables Extraction requirement 3800 m³/h Overall dimensions 6500x7700 mm Dodpfx Aceylbdtevocf

Condition: used, machine/vehicle number: 008207, Max. panel width: 2200 mm Max. panel length: 3300 mm Max. panel stack height from the ground: 690 mm Dedpfx Ajx A Tiuocvecf Lifting capacity: 7000 Kg

Condition: used, machine/vehicle number: 008348, Max. panel width: 4300 mm Max. panel length: 1600 mm Main saw blade projection: 125 mm Dsdpeyl Iiiofx Acvecf No of Grippers: 5

Condition: used, machine/vehicle number: 008384, Max. panel width: 4300 mm Max. panel length: 4250 mm Main saw blade projection: 95 mm No of Grippers: 9 Dcodpfx Asx Swcmecvsf

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-240-06-8516, functionality: fully functional, operating hours: 1,039 h, power: 25.4 kW (34.53 HP), input voltage: 400 V, input current: 46 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 125 mm, cutting width (max.): 5,600 mm, saw blade diameter: 450 mm, height adjustment type: pneumatic, saw blade bore: 60 mm, Equipment: documentation/manual, saw blade guard, scorer, Horizontal pressure beam saw Panel saw from the ProfiLine series Fully equipped, many (otherwise unavailable) extras retrofitted by HOLZMA. Very well-maintained and manufacturer-serviced machine, only 1,039 (!) operating hours SPECIFICATION / FEATURES: Cutting width / cutting length: 5,600 / 5,600 mm Saw blade projection: 125 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Power-Loc system for quick blade change Dcsdeyti Icspfx Acvsf 14 double-finger, floating mounted clamps Pneumatic trim stops for protruding surface layers Central angle pressure device, adjustable pressing pressure 5 air cushion tables, 3 extendable to approx. 3,500 mm Laser alignment system in the cutting direction Grooving function Manual mitre stop for angled cuts Automatic label printer positioned on the pressure beam Manual label printer beside the operator control center ELECTRONICS & CONTROL: CADMATIC 4.0 Cutting optimization in the office, Schnitt-Profit V9 license

Condition: used, machine/vehicle number: 008396, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Grippers: 9 Dcodsygtacspfx Acvsf

Condition: used, machine/vehicle number: 008206, Max. panel width: 4300 mm Dcjdpfx Acex A Tizsvjf Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 9

Condition: used, machine/vehicle number: 005255, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 110 mm No of Grippers: 7 Dedpfxeg E Tcxe Acvjcf

Condition: used, machine/vehicle number: 008131, Max. panel width: 4400 mm Max. panel length: 4400 mm Main saw blade projection: 75 mm Dedpfxsw Idh He Acvscf No of Grippers: 7

Condition: used, machine/vehicle number: 006645, Max. panel width: 5600 mm Max. panel length: 2850 mm Main saw blade projection: 125 mm No of Grippers: 11 Dedov Ir Scspfx Acvocf

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Max. panel length: 4400 mm Dcsdpju N Sliofx Acvjf Main saw blade projection: 75 mm No of Grippers: 7

Condition: used, machine/vehicle number: 008368, Max. panel width: 3800 mm Max. panel length: 3800 mm Dcjdpfx Acsykivnovjf Main saw blade projection: 75 mm No of Grippers: 6