Used Homag Baz 324 for sale (491)

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-201-21-4348, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, workpiece length (max.): 5,860 mm, workpiece width (max.): 1,600 mm, controller manufacturer: HOMATIC, total height: 2,950 mm, total length: 11,500 mm, total width: 7,500 mm, controller model: PC85, spindle motor power: 7,500 W, Equipment: documentation/manual, HOMAG BAZ 722/58/K Gantry 4-Axis CNC Machine with 2 Shuttle Tables and Gluing Unit Year of manufacture: 2004 NOTE: The main spindle and the machine’s control computer were replaced approx. 2.5 years ago. Workpiece length X max. (with gluing unit) - max. 5660 mm with single loading - max. 2680 mm with pendulum (shuttle) operation Workpiece length max. (milling cutter D=25mm) - max. 5860 mm with single loading - max. 2870 mm with pendulum operation Workpiece width Y max.: - max. 1300 mm – all units - max. 1400 mm – with gluing unit - max. 1520 mm – with milling operation D=25 mm Isdpfxswpb Nfe Aalstd EQUIPMENT / SPECIFICATION Console Table / Vacuum System - 2 independently operating shuttle tables in Y-direction (2 Y-axes) - Both shuttles can be synchronized for machining large workpieces (single mode) - 6 movable consoles per shuttle (total 12), each with 1 longitudinal stop at the front - Each console fitted with a lifting rail mounted on the side - Console length 1340 mm - 3 retractable lateral stops (2 left, 1 right, mirror position) - Approx. 20 vacuum blocks 160x140 mm - 2 vacuum pumps, capacity 100/140 m3/h, 1 per field (left/right) Milling Spindle / Units / Tool Changer - Main spindle 7.5 kW (S6 or S1 mode), n max = 18000 rpm, vector-controlled - HSK F63 tool clamping - Liquid cooling with temperature monitoring - NOTE: The main spindle was replaced in 2021. - C-axis with unit interface - Auxiliary spindle with permanently mounted gluing unit (with its own X & C axis), 360° edge banding with butt joint gluing - Double edge roll magazines, automatic edge change - Fixed vertical drilling head with 12 spindles (individually selectable) / 6 spindles in X, 7 spindles in Y direction Drive motor 4 kW, 4500 – 6000 rpm - 18-position tool changer (carousel type) - Sawing and trimming unit for tool changer - Boring and milling unit with 4 spindles (2 x X-, 2 x Y-direction) - Combination flush trim and scraping knife unit Chip Disposal / Safety / Other - Chip conveyor integrated in machine body - Safety fence left and right of the machine, 1 access door with safety interlock - Extraction port Control / Software: • PowerControl PC85 operating system NOTE: Both machine control computers were replaced in 2020. • WoodWop 5.0 • WoodScout • Power supply 400 V, 50/60 Hz • Cooling unit for control cabinet • Laser positioning Mr. BEAM Machine dimensions (occupied space after installation): L 1150 x W 700 x H 290 cm Availability: Immediately

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections Isdsyic Tuspfx Aaljtd - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Itjdpfsqvnl Tox Aaled

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Working area X: 4000 mm Working area Y: 1600 mm C-axis electrospindle, power 11 kW, HSK 63F interface Itodpjyprr Nsfx Aaljd Vertical drilling heads: 17 Horizontal drilling head with cross position + blade Milling and end-processing unit 360° gluing unit Combined edge trimming/scraper unit Edge band magazine with 2 positions 12-position rotary magazine Control: Power Control PC 85 WoodWop7.1 (update in 2018, paid approx. €9,500) Worktable with 8 beams and suction cups Elmo Rietschle vacuum pump Safety mats Chip conveyer belt

Condition: good (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, Equipment: CE marking, documentation/manual, HOMAG Optimat BAZ 722/42/16/K Itodpfxsyq Nkrs Aaljd Gantry CNC machine with 2 shuttle tables Options included: Vacuum pumps 2pcs Parts positioning laser. Vacuum pads Scrap parts transporter

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 0-201-09-5124, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, controller model: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working range: 6,000 mm Y-axis working range: 1,650 mm – up to 1,750 mm for milling Max. travel height during edge banding: 60 mm Max. applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Max. unit saw blade diameter: 200 mm Isdpfeydl Nwox Aalotd MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C Vector: 11 kW, HSK F63 Edge specification: Rolls, PVC / ABS 0.4 - 3 mm EQUIPMENT 10 adjustable support rails for vacuum cups Loading and unloading aid with 8 pneumatic rods Vacuum cup positioning with laser system Edge banding unit with 360° rotation, glue pot, and preheater for granular EVA glue Rubber-coated pressure roller + Rubber-coated pressure roller Preheating lamp Edge trimmer and edge scraper Edge holder magazine Front and side safety system with carpets Protective cage around access area Chip extraction with motorized conveyor belt Air conditioning for machine control cabinet Automatic lubrication system Vacuum pump

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) Ijdpfxew Dc Nij Aaletd No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type - Front emergency carpets Numerical Control Type PowerControl PC 85 - Software WoodWop Iedpfeh Ucn Rox Aalstd No. 10 Supports/Rails (mm 1340) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store at No. 18 folds) Max. useful working area (X - Y - Z) mm 6175 x 1550 x 60 Max. useful working area (X - Y - Z) in edge banding mm 6000 x 1475 x 60 No. 2 Working areas - No. 2 Vacuum pumps (capacity m3/h 100 each) Motorized carpet to evacuate the wastes from the working process Total installed power KW 27 Working groups (top) No. 17 Independent vertical boring spindles (power of the drilling head Kw 2,2) No. 4 Independent horizontal boring spindles No. 1 Vertical main Electro-spindle HSK F63 Kw 11 No. 1 Circular Saw 0°-90°) diam. (mm) 125 No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 2 reels/Coils)

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 0-201-25-5219, functionality: fully functional, input frequency: 50 Hz, travel distance X-axis: 4,800 mm, travel distance Y-axis: 1,400 mm, Equipment: rotational speed infinitely variable, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection by the end of August! TECHNICAL DETAILS Travel distances X-axis travel: 4,800 mm Y-axis travel: 1,400 mm MACHINE DETAILS Electrical data Supply voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated current: 53 A Fuse: 63 A Control voltage: 24 V Type of input current: Three-phase EQUIPMENT Ijdpew Ekkkjfx Aaljtd Continuously adjustable spindle speed Edge processing unit

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Machine number: 559969 Manufacturer: HOMAG Model: PROFI BAZ 723/42/18/KC Year of manufacture: 2004 Technical details: Weight approx.: 10000 [kg] control: PC85 [] Dimensions (l x w x h) approx.: 39000 x 3200 x 3200 [mm] c-axis: ja / yes [] software: WoodWOP [] working length x-axis: max. 4.200 [mm] working width y-axis: max. 2.075 [mm] main spindle: 2x 14,5 [kW] tool changer: 2x 18-fach / 2x 18-fold [] vacuum pump: 2x 100 [cbm/h] edge gluing unit: ja / yes 360° [] path-feed rate max. X-axis: 80 [m/min] path-feed rate max. Y-axis: 60 [m/min] Isdpexvy Ukofx Aaletd path-feed rate max. Z-axis: 40 [m/min] Item Description High-End-equipped, technically well maintained HOMAG PROFI BAZ 723/42/18/KC CNC Machining Center in portal design with 360° edge glueing unit, 2 main spindle with C-axis, automatically positionable clamping consoles and HOAMG Optimat TBP 370 vacuum feeder in in portal design. The original price was approx. 620.000 EUR. Technical data and equipment of the HOMAG Profi BAZ 723 CNC: - Workpiece length for single operation max. 4.200 mm - Workpiece length cutter Ø 25 mm for pendulum operation max. 2.040 mm - Workpiece length glueing for pendulum operation max. 1.850 mm - Workpiece width (cutter Ø 25 mm) max. 2.075 mm - Workpiece width (glueing) max. 1.950 mm - Workpiece width (all aggregates) max. 1.850 mm - Console table KC-System 2 pieces left/right automatic positioning of the consoles and vacuum clamps - First main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Second main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Edge gluing aggregate 360° glue with butt joint mounted on the right side of the portal with Y-axis drive Drive spindle with C-axis edge height max. 65 mm edge thickness 0,4 - 3 mm pre-cutting station and 2-fold roller magazine - Chip conveyor belt for automatic disposal with ascending conveyor (The tools, the HSK holders and the units for the tool changer are not included within delivery. A transport rack from HOMAG is required for transportation of the dismantled machine. Terms of payment and delivery Delivery terms: ex foundation, unpackaged Payment terms: 100% before loading Warranty: Without any warranty

Condition: used, functionality: unexamined, Ferwood Code: RU0010812 - Manufacturer Code: 1-056-08-3420 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Itodpfxsv Iz Uge Aaljd

Condition: ready for operation (used), Year of construction: 1998, Homag Processing Center Genius BAZ20/30/14/D Itedpfx Asx Nrk Healod Electronically controlled milling and edge-banding machine, post-processing, and drilling center designed for batch production of furniture parts, solid wood, or similar materials. Base Machine: - Heavy-duty, stable machine bed with a compact linear guide system. - Aggregate carrier with linear guide system, ball screw, and digital AC servo motor for Z-axis positioning, travel distance 340 mm - Automatic central lubrication for all drives and linear guides - Designed for the attachment of various table configurations Control System: Wood Wop 5.0 - Enlarged Z-axis travel, 500 mm - Extended safety step mat - Manual through-feed table B20/30+40/…/D - Motorized width adjustment of the longitudinal console D-table - Chip conveyor belt for B../30+40/K - Stop pins for laminate overhang - Main spindle, 12 kW - Chain tool changer, 70 positions for B20, for HSK 63 F tools - Aggregate interface for main spindle - Electrical/electronic interface 220/24 volt - Edge gluing aggregate, 4 sides for main spindle - Melting unit with granulate container - External automatic triple edge changer - Rack changer system for aggregates and tools - Rabbet pressure zone for main spindle - Flush trimming unit for tool changer - Saw and crosscut unit for tool changer - Boring/milling unit with 4 spindles for tool changer - Lock case milling unit for rotary magazine - Vertical milling unit with tracing ring - Sanding unit with air blast nozzle - CNC programming system Wood-Wop - Post-processor for BAZ - Free-standing control panel Location: Ex works, customer site - Immediately available - Machine must be dismantled by the buyer.

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor Itjdpfx Asx D Ribsalsd • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Year of construction: 2002, condition: ready for operation (used), Main Drive Number of axis 4 This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information. Application Types CNC Wood Machining Itodpfox D Dvnex Aaled

Condition: used, Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units Iodpfjb Uhpbjx Aaljtd -with heavy leadership -laterally movable -with counter -Table height: 280 mm -Table surface: 3240 x 295 mm -Table thickness: 20 mm -Price: per piece -Number: 2x available -Dimensions: 3240/295/H280 mm -Weight: 330 kg

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min Ijdpfx Aeyqybuealstd PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, working width: 1,935 mm, number of spindles: 40, plate height: 350 mm, working length: 6,200 mm, number of axes: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge tape magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Safety mats at the front Vacuum pump Waste chip conveyor Fixed groove unit for slotting in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. Iodpfeyqx U Hox Aalstd External reference: 8105

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Itodpfx Aaeytr Hbelod Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling (X-direction): 2 Number of spindles for horizontal drilling (Y-direction): 1 Total number of spindles: 20 Iedpfx Aoyttf Sealjtd Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied based on availability (left side only). The machine is sold and delivered in its actual and legal condition (‘as seen and approved’), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection, and assumes responsibility for installation, safety, and use of the machine at the destination. External reference: 6906

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Itsdsyttcwepfx Aalod Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for installation, securing, and usage of the machine at the destination. External reference: 7350

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Specification: Cutting length: 4300mm Cutting Width: 4300mm Saw Blade Projection: 80mm Iedjyuw Umopfx Aaletd Control Screen on Right Hand Side Machine Table fully air cushioned Program fence Speed forward 25m/min Program fence speed backward 90m/min Standard Clamps: 225, 325, 475, 775, 1075, 1825, 3425mm Power Concept – This allows several strips of different cross cutting lengths to be cut together with a performance increase of up to 40% Pressure beam height control Saw carriage speed 130m/min Main saw motor 11kw with pneumatic lift Scoring saw unit 1.5kw with pneumatic lift Electronic scoring saw adjustment from the control screen 4No air cushion tables 2160 x 650mm Label printer 400V 50Hz Control Touch touch screen monitor Data Transfer via network + USB port CE Eco Plus technologies save up to 20% on energy consumption

Condition: excellent (used), Year of construction: 2020, Homag Edgeteq S-200 Year: 2020 Specification: Itjdpoypm Hhefx Aalod Feed Speed 11m/min Machine Length 4605mm Workpiece Thickness max 60mm Edge Material Roll 0-3-3mm Edge Material Strips 0.4-5mm Joint trimming / pre-milling (44mm high blocks) Standard EVA glue unit Pressure zone with 1 main pressure roller + 2 idel rollers with pneumatic adjustment for thickness End Trim unit with pneumatic adjustment for chamfer / straight Top and bottom trimming unit with 2mm cutters Contour trimming unit with 2mm cutters Profile scraping with pneumatic adjustment with 2mm blades Additional changeable scraping heads with 1mm blades Glue Joint scraper Buffers LED indoor lighting Control system easy touch Package for construction elements Basic v Package Central Lubrication 400V 50Hz CE

Condition: excellent (used), Year of construction: 2019, Specification 2 tanks 1 cleaning station Suitable for right sided machine such as Edgeteq S-240, S-300 and S-380 400V 50Hz Iodpfxeypm Dge Aalotd

Condition: excellent (used), Year of construction: 2019, Specification: Working height: 950mm Length: 4773mm Workpiece Thickness: 60mm Edge Material Roll: 0.4-3mm Edge Material Strip:0.4-6mm Adjustable Infeed Fence Workpiece Support Feed Speed 11m/min Central Lubrication Roller Top Pressure Manual Top Pressure Adjustment Separating Agent Spray Device Joint Trimming Unit 2x2.2kw Panel Pre-Heating QA65 Application unit for PUR Pressure Zone End Trim Unit Trimming Unit Counter Trimming unit Radius Scraping Unit with 2 sets of quick change heads Glue Joint Scraping Detergent Spraying Unit Buffers 400V 50Hz CE Itsdoypm Avepfx Aalod XES 200 with 2 tanks and 1 cleaning station including collecting tray.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, input voltage: 415 V, Equipment: CE marking, documentation/manual, Homag BHX 055 Cnc router boring machine centre Ijdpfx Aasytfkmjlotd