Edgebander

Homag KAL 370/5/A20

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit Fedpfxezdzmkj Aikopp 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Fpjdpji Hn Srjfx Aikop Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: used, Year of construction: 2007, machine/vehicle number: 3750, functionality: fully functional, The machine applies adhesive to solid wood up to 18.0 mm thick and rolled materials up to 3.0 mm thick. It also applies edge banding from rolls, 3.0 mm thick PVC, ABS, and real wood up to 2.0 mm thick. It features edge trimming at 18 mm. Rounding and bevel milling stations are included. Total length: 3.20 m. Power consumption: 7.1 kW. Includes an adhesive tank. Equipped with an edge trimming shear. Features stepless feed. A miter saw is included for front and rear edges. A flush trimming unit is included. Fedpfxjigad Ej Aikspp A rounding milling unit is included. Equipped with a chassis. Dust extraction connection: 100 mm.

Condition: used, Automatic double cell unloader without pit for use in a squaring and edge banding line Motorized panel introduction transfer Double automatic panel unloading station Fedpfx Aiorzhftjkspp Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Martyr panel management system Programming and control system

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Equipment: 01_ Cross-sections 20 x 60 to 300 x 450 mm 02_ Feed conveyor, transverse, 5 strands, 2.2 m 03_ Undercutting miter saw 04_ Universal milling machine ----> Roller cutter ----> Finger cutter 05_ Combination support for vertically operating tools ----> 1x Drilling machine ----> 1x Finger milling machine 06_ Combination support for horizontally operating tools ----> 2x Drilling machine ----> 1x Grooving machine 07_ Beam turning station, fully automatic Machine installation: 08_ Substrate, foundation: ----> The floor slab must have a thickness of at least 10 cm (with corresponding good reinforcement) This should be level and suitable for anchoring. 09_ Power requirements, type, quality, quantity: 09.1_ Electrical: ----> Voltage: 400/230V, 3/N/PE ----> Fuse rating: 3 x 63A ----> Frequency: 50 Hz ----> Peak demand: 15 kW Fpedpfozv Tt Hsx Aikop The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2_ Compressed air: ----> Flow rate: V < 600 l/min ----> Pressure: Operating pressure p = 8.5 bar; Maximum permissible pressure p = 10 bar Important: The control system was converted by Hundegger from MIPPS to CAN control in the fall of 2020!!

Condition: excellent (used), Numerical Control Type NC 400 (Software) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Fedpfx Aogk T Ttjikopp Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 48 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: used, Year of construction: 2012, PUR retrofit 2023 / EasyPUR AC-34 / RIEPE spray system LP289/99 24 V. Retrofit including 2x spare glue reservoirs. Output: approx. 15,000 - 20,000 linear meters per year. Annual maintenance by HOMAG. Feed rate: 28-25 m/min; with FK 11 max. 20 m/min. Working height: approx. 950 mm. Machine length: approx. 7845 mm. Workpiece thickness: 12-40 mm standard; version up to 60 mm. Edge material roll: approx. 0.3-3 mm. Edge material strip: approx. 0.4-6 mm. Roll diameter: max. 830 mm. Pneumatics: 6 bar. Electrical: 400 V / 230 V, 3 phases, 50 Hz. Equipment: Release agent spray unit top / bottom. Joint milling unit. Gluing unit. 2-roll edge magazine. Pressing zone. Trimming unit HL 81. Pre-milling unit BF 10. Profile milling unit FK 11. Profile trimming blade PN 10. Finishing unit with glue joint trimming blade and buffing unit. Preparation for HOMAG laserTex powerControl PC 22 with touchscreen. Automation packages. Trimming blades for 2mm, as well as for 1 mm edges. Fpodez Hb Hmepfx Aiksp Storage location: Nattheim