Used Holzma Easy To Feed for sale (79)

Condition: excellent (used), cutting dimensions: 4300x4300mm Lredpfx Aljzuk S Remsr label printer 4 air tables table length: 2.2m 7 grippers pneumatically extending supports for cutting veneered boards unit for angled cutting main motor power: 18kW trimmer motor power: 2.2kW cutting height: 125mm saw carriage feed rate: 0-150m/min pusher beam feed rate: 0-90m/min control system: CadMatic 4.0 year of manufacture: 2011 operating hours: 5800h 6-month warranty on mechanical parts!

Condition: excellent (used), Year of construction: 2003, I sell the panel beam saw HOLZMA HPL11/43/22. Year 2003. Cutting size 4300x2200mm + back loading table. Cutting height 125mm. Lrodszkb T Depfx Almer Total area covered W.7060mm x D.9490mm 7 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. CE conformity and optimising software included. Very good condition. Available immediately.

Condition: excellent (used), cutting dimensions: 4300x4300mm label printer 4 air tables table length: 2.2m 7 grippers pneumatically extending supports for cutting veneered boards unit for angled cutting main motor power: 18kW trimmer motor power: 2.2kW cutting height: 125mm saw carriage feed rate: 0-150m/min pusher beam feed rate: 0-90m/min control system: CadMatic 4.0 year of manufacture: 2011 operating hours: 5800h 6-month warranty on mechanical parts! Ljdpfx Aszr U T Holmerr

Condition: used, Year of construction: 1991, Strip cutting system Strip cutting system consisting of: Alphamatic vacuum loading system with 4 roller conveyors Feed system to the crosscut saw Crosscut saw with vacuum workpiece clamping Further transport to the ripsaw Lrjdpszuy Nrefx Almor Ripsaw Manufacturer: Holzma Type: HPP81-3200 Year of manufacture: 1991 Technical data - Modified in 2019 Extraction conveyor belt Longitudinal roller conveyor with longitudinal measuring system Automatic labeling system REA JET Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 Ledsx Aqdcjpfx Almjrr 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: ready for operation (used), Year of construction: 2001, operating hours: 22,539 h, This HOLZMA HCL 11/56/22 was manufactured in 2001. It features a maximum panel size of 5600 × 2200 mm and a cutting length of 5600 mm for longitudinal sawing. The saw blade projects up to 125 mm, and it includes a turning station sized 1250 × 1250 mm. With a lifting capacity of 10 tons and a maximum lifting height of 1430 mm, consider the opportunity to buy this HOLZMA HCL 11/56/22 panel saw. Contact us for more information. • Total connected load: 88 kW • Voltage: 400 V / 50 Hz / 3~ + N • Current: 159–160 A • Control voltage: 24 V • Cutting capacities: • Maximum panel size: 5600 × 2200 mm • Minimum panel size: 2440 × 1220 mm • Cutting length (longitudinal saw): 5600 mm • Cross saw: 2200 mm • Saw blade projection: 125 mm • Pneumatic and extraction requirements: Lredpfszug S Hsx Almjr • Required air pressure: 6 bar • Air consumption: 250–300 l/min • Dust extraction volume: 10,000 m³/h • Air speed: 26 m/s • Installation / floor requirements: • Concrete quality: B25 • Minimum concrete thickness: 200 mm • Floor level tolerance: ±10 mm • Working height: approx. 485–520 mm • Extraction connections: Ø 320 mm (main) + Ø 150 mm + Ø 80 mm • Operating hours (from counters): • Counter 1: 23,610.8 h • Counter 2: 22,539.7 h Additional equipment • Lift table: • Maximum panel size: 5600 × 2200 mm • Stack height without pit: 550 mm • Stack height with pit: 1430 mm • Maximum lifting height: 1430 mm • Lifting capacity: 10 t • Turning station: • Dimensions: 1250 × 1250 mm

Condition: used, Year of construction: 2010, power: 30 kW (40.79 HP), cutting width (max.): 3,800 mm, controller model: POWERCONTROL, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Max. panel width: 3,800 mm Max. panel length: 2,200 mm Min. cutting height: 6 mm Max. saw blade overhang: 130 mm Number of tables: 3 Number of grippers: 7 Gripper arrangement: On the sliding stop Max. feed rate: 90 m/min Sawing unit Number of saw carriages: 1 Positioning: NC-controlled Max. tool diameter: 480 mm Motor power: 18 kW Scoring unit Positioning: NC-controlled Lredpfjzmtnljx Almsr Max. tool diameter: 200 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Machine programming software: CADMATIC 4 Total connected load: 30 kW EQUIPMENT CE marking Barcode label printer The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7875

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, COMPLETE FACTORY FOR MOBILE PRODUCTION FOR SALE 1 pc AUTOMATIC ANGULAR PANEL SAW Manufacturer: HOLZMA – Germany Model: HCL 11/56/22 Serial No.: 0-241-17-0009 Year: 2001 1 pc AUTOMATIC SIZING, EDGEBANDING, AND BORING LINE INCLUDES: Lrodpfx Aexwt Igelmjr - BRIDGE VACUUM LOADER - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 525/6/A3/15 Serial No.: 0-202-10-1687 Year: 2007 - 90-DEGREE ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: PROFI TB 10/25/12 Serial No.: 0-205-10-5100 Year: 2007 - AUTOMATIC SIZING AND EDGEBANDING MACHINE Manufacturer: HOMAG – Germany Model: OPTIMAT KFL 526/8/A3/15 Serial No.: 0-202-10-1689 Year: 2007 - ROLLER CONVEYOR Manufacturer: HOMAG – Germany Model: OPTIMAT TDL 310/25/12 Serial No.: 0-205-10-1688 Year: 2007 - BORING MACHINE Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2754 Year: 2007 - BORING MACHINE Manufacturer: WEEKE – Germany Model: OPTIMAT BST 500 D Serial No.: 0-251-04-2755 Year: 2007 - BRIDGE VACUUM UNLOADER

Condition: excellent (used), Cutting dimensions 4300x4300 mm label printer 4 air tables table length 2.2 m 7 grippers pneumatically extendable stops for cutting veneered panels angle cutting unit Lsdpfx Alozuk Skjmorr main motor power 18 kW scoring saw motor power 2.2 kW cutting height 125 mm saw carriage feed speed 0-150 m/min pusher beam feed speed 0-90 m/min control system: CadMatic 4.0 year of manufacture 2011 operating hours: 5800

Condition: ready for operation (used), Year of construction: 1999, total width: 8,500 mm, total height: 2,500 mm, product length (max.): 26,000 mm, Panel saw manufactured in 1999. This HOLZMA HPV11 features a maximum panel dimension of 2,100 x 4,100 mm and can cut up to 6 panels simultaneously. It includes lifting tables and a Liftomat, along with an automatically height-adjustable clearing table. If you are looking to get high-quality cutting capabilities, consider the HOLZMA HPV11 panel saw we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Phase / Wiring: 3 ~ + N- Current (Amperage): 80 A- Control Voltage: 24 V- Included Equipment: Equipped with lifting tables and Liftomat- Loading Capacity: 3 stockyards with 25 panels each- Maximum Panel Dimension: 2,100 x 4,100 mm- Capacity: Up to 6 panels can be cut simultaneously- Discharging Table: Automatically height-adjustable clearing table- Special Features: Cut layout optimization for maximum material utilization and low waste Lrsdpfx Alezuhcyomjr

Condition: used, Year of construction: 2007, Saw blade overhang 95 mm Saw carriage feed: forward 1-130 m/min reverse constant 130 m/min Program slider speed: forward 80 m/min reverse 80 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control yes Automatic cutting height control yes Adjustable pressure beam clamping pressure yes Adjustable clamping chuck clamping pressure yes Completely shrouded machine table (saw body) yes Angle guide device min. pressing width 0 mm max. pressing width complete cutting length Main saw motor 18.0 kW Scoring saw motor 2.2 kW Operating voltage 400 V / 50 Hz Lrjdpfx Aszuph Dslmjr Electrical connection value for high-power motor: 18.0 kW = 24 kW 21.0 kW = 27 kW Working height 920 mm Paint finish: textured paint gray RDS 240 80 05 Main saw blade 380 x 4.4 x 60 mm Scoring saw blade 180 x 4.4 - 5.4 x 45 mm Required air pressure 6 bar Compressed air consumption 150 NL/min V at the dust extraction nozzle approx. 26 m/s Vacuum min. 1200 Pa Exhaust air volume 4600 m³/h Dust extraction connection, chip channel 1 piece 200 mm Dust extraction connection, pressure beam 1 piece 150 mm HPP 380/43/43 Cutting length 4300 mm Cutting width (program slider travel) 4250 mm Roller rail (10-track element) 1 piece Roller rail (2-track element) 5 pieces Clamping chucks 7 pieces of which the first 3 pieces are two-finger, all others are single-finger Spacing 75/275/475/1050/1850/2650/3450 mm measured from the angle ruler to the center Clamping chuck 2 additional two-finger clamping chucks possible Pos. 175/375 mm 1 additional single-finger clamping chuck possible Pos. 650 mm 4 manual trimming stops on clamping chucks Pos. 75/475/1050/2650 mm Air cushion table with roller element 2160 x 650 mm 4 pieces Central blower 1 piece Nozzle spacing of the air cushion tables 70 x 70 mm Specifically designed for bending parts. The lifting device shown in the pictures is not included.

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Max. panel length: 4300 mm Lrsdpox A Tamefx Almsr Main saw blade projection: 125 mm No of Grippers: 7

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22 Lrodpfsy Hcd Sex Almsr

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, operating hours: 11,900 h, Cutting dimensions: 4300x4300 mm Lsdpfx Aljytt H Ajmsrr Blade diameter: 350 mm Label printer Total power: 20.9 kW Maximum cutting speed – 130 m/min, steplessly adjustable Maximum pusher speed – 90 m/min Maximum cutting height – 80 mm Four air tables Automatic scorer adjustment Year of manufacture – 2014 Operating hours – 11,900

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Min. cutting width: 4,300 mm MACHINE DETAILS Lodpfjyuya Eex Almsrr Number of transport packages: 8 pcs. Year of manufacture: 2016

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 0-240-14-3022, functionality: fully functional, cutting width (max.): 5,600 mm, saw blade diameter: 450 mm, cutting length (max.): 5,600 mm, stack height: 580 mm, TECHNICAL DETAILS Maximum cutting length: 5,600 mm Maximum cutting width: 5,600 mm Ledpfszhm Riex Almorr Maximum panel dimensions with rear loading using a lifting platform: 5,600 mm x 2,240 mm Maximum stack weight on the platform: 10 tons Maximum stack height: 580 mm Saw blade projection: 125 mm Saw blade diameter: 450 mm Saw carriage feed rate during cutting: 5 to 150 m/min Saw carriage return feed rate: 150 m/min Program slider feed rate: 80 m/min Number of clamping devices: 9 Spacing of clamping devices: 75 mm / 275 mm / 475 mm / 1,075 mm / 1,775 mm / 2,475 mm / 3,275 mm / 4,075 mm / 4,875 mm MACHINE DETAILS Connected power of the main saw motor: 13.5 kW Connected power of the scoring saw: 2.2 kW Voltage: 400 V Frequency: 50 Hz Phases: 3 Air cushion tables: 5 units, each 2,810 mm x 650 mm Control system: CAD-matic 4.0

Condition: excellent (used), Holzma B14/4 drilling machine in excellent condition. Ready for operation. Video of the machine in operation available. Lodexyxgtopfx Almjrr

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Outside Rollers table for pre-loading (mm 5600 x 2200) Lredpozl S Nfefx Almer Lifting scissor table (mm) 5600 x 2200 Rear pusher with 13 clamps / grippers (1 x Power Concept / Twin Pusher) With clamps / grippers - RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Turning device (rotating unit) at 90° Max. cutting width (mm) 5600 - Useful stroke of the pushing system (mm) 5600 Max blade projection (mm) 130 Scoring Unit (max saw diameter / power) mm 200 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 480 / Kw 30 Adjustable speed of the saw carriage (m/min) 1 - 150 N° 5 Front supporting tables with Air blowing system OPTION: Printer for labels - PICA

Condition: used, Year of construction: 2006, power: 25 kW (33.99 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, cutting length (max.): 4,300 mm, TECHNICAL DETAILS Max. panel width: 4,300 mm Max. panel length: 4,300 mm Min. cutting height: 3 mm Max. cutting height: 110 mm Max. saw blade overhang: 125 mm Feed and Grippers Number of grippers: 9 Number of grippers on the sliding stop: 9 Max. feed rate: 80 m/min Max. feed rate of the saw carriage: 120 m/min Saw Carriage Max. tool diameter: 450 mm Motor power: 18 kW Speed: 2,870 rpm Scoring Unit Design: Postforming scoring unit Max. tool diameter: 340 mm Motor power: 2.2 kW Speed: 2,880 rpm MACHINE DETAILS Control system: Windows XP Machine programming software: CADMATIC 3 Total connected power: 25 kW EQUIPMENT CE marking 4 front support tables 9 grippers on the sliding stop Postforming scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8206 Ledpfx Ajzmtn Selmjrr

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-240-10-3388, functionality: fully functional, operating hours: 565 h, cutting width (max.): 4,250 mm, controller model: POWER CONTROL CADmatic 4 PROFESSIONAL, section length (max.): 4,300 mm, working height: 920 mm, Lightly used machine! TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Lrjdpfx Ajyla I Rjlmsr Angular accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main unit motor power: 13.5 kW Scoring unit motor power: 2.2 kW Mains voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction connection speed: approx. 26 m/s Negative pressure: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection—chip duct: 1 x 200 mm Extraction connection—pressure beam: 1 x 150 mm Operating hours: 565 h EQUIPMENT Power Concept Angle cutting package Groove-cutting package Automatic ejector rule Labelling package Data linkage to storage systems Note: Further details regarding machine configuration can be found in the attached document.

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm - Saw blade overhang: 125 mm Lredpfxozuy A Ss Almer - Main saw: 18 kW - Scoring saw: 2.2 kW Panel dividing saw Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Technical specifications - Cutting length: 3300 mm - 3 air cushion tables - Lifting table: 3300 x 2200 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW - CADMATIC control system - CADMATIC control system Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2004, saw blade diameter: 180 mm, tool diameter: 450 mm, Equipment: scorer, TECHNICAL DETAILS Sawing carriage Max. saw blade overhang: 125 mm Number of grippers: 11 Max. feed rate: 80 m/min Max. tool diameter: 450 mm Motor power: 21 kW Scoring saw Max. saw blade diameter: 180 mm Ljdpfx Aszmtm Uelmorr Motor power: 2.2 kW Max. feed rate: 150 m/min EQUIPMENT Lifting table Scoring unit Barcode label printer The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6645

Condition: used, machine/vehicle number: 005106, Max. panel width: 4300 mm Max. panel length: 4250 mm Lsdpfxsyg Edmj Almsrr Main saw blade projection: 95 mm

Condition: good (used), Sandwich saw Lrodpfx Aljxam R Hemsr Underfloor type Brand: Holzma Cutting range: 1500 mm

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-240-14-5243, functionality: fully functional, cutting width (max.): 4,300 mm, cutting length (max.): 4,300 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Max. cutting length: 4,300 mm Lrsdexcnv Aepfx Almer Max. cutting width: 4,300 mm MACHINE DETAILS Voltage: 400 V Power consumption: 38 A Fuse: 50 A EQUIPMENT Documentation available CE marking present