Used Holzma Hpp 200 for sale (69)

Condition: ready for operation (used), Year of construction: 1991, Used strip cutting line consisting of: Alphamatic vacuum feeding system with 4 roller conveyors Feeder to the crosscut saw Crosscut saw with vacuum workpiece clamping Conveyor to the rip saw Rip saw Manufacturer: Holzma Model: HPP81-3200 Year of manufacture: 1991 Discharge conveyor Longitudinal roller conveyor with length measurement REA JET automatic labeling system Shredder Brand: Schuko Type: 6M900K Year of manufacture: 2017 Technical specifications - 18.5 kW Belt conveyor system Brand: Kraft Year of manufacture: 2018 Technical specifications - Consists of 13 individual belt conveyors - Conveyor length: 3000 mm each - Belt width: approx. 580 mm - 3 of the 13 conveyors are swing-out Guedsy Drgwopfx Ai Nsc Scissor lift table Year of manufacture: 2005 Technical specifications - Load capacity: approx. 1000 kg Edge processing machine Brand: Hebrock Type: AKV2001F Year of manufacture: 2000 Technical specifications - With scrapers and brush unit on a chassis Tilting skip Brand: Bauer Type: WU-R 750 Year of manufacture: 1991 Used strip cutting lineconsisting of:Alphamatic vacuum feeding system with 4 roller conveyorsFeeder to the crosscut sawCrosscut saw with vacuum workpiece clampingConveyor to the rip sawRip sawManufacturer: HolzmaModel: HPP81-3200Year of manufacture: 1991Discharge conveyorLongitudinal roller conveyor with length measurementREA JET automatic labeling systemShredderBrand: SchukoType: 6M900KYear of manufacture: 2017Technical specifications- 18.5 kWBelt conveyor systemBrand: KraftYear of manufacture: 2018Technical specifications- Consists of 13 individual belt conveyors- Conveyor length: 3000 mm each- Belt width: approx. 580 mm- 3 of the 13 conveyors are swing-outScissor lift tableYear of manufacture: 2005Technical specifications- Load capacity: approx. 1000 kgEdge processing machineBrand: HebrockType: AKV2001FYear of manufacture: 2000Technical specifications- With scrapers and brush unit on a chassisTilting skipBrand: BauerType: WU-R 750Year of manufacture: 1991Note:The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm Gujdjx A Tamepfx Ai Nec No of Grippers: 7

Condition: excellent (used), Year of construction: 2008, Machine Data: Holzma HPP 380/43/43 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rails (2-track element): 9 pcs Clamps: 7 pcs, first 3 clamps: 2-finger type Air cushion table width: 650 mm / 1 x 800 mm (4 pcs), each 2810 mm length Central blower: 1 unit, high output version POWER-CONCEPT TYPE PROFILINE HPP/L 380 – 1 ‘Power-Concept’ clamp (3-finger type) – 3 skew-lift clamps (2-finger type) – 1 skew-lift clamp (1-finger type) – 1st air cushion table, 800 mm wide – Speed package: saw carriage feed rate 1 – 150 m/min Technical Data: Saw blade protrusion: 95 mm Saw carriage feed rate: forward 1-130 m/min, reverse fixed at 130 m/min Automatic cutting height adjustment Angle alignment device, min. pressure width: 0 mm, max. pressure width: full cutting length Main saw motor: 21 kW, frequency-controlled Scoring saw motor, type VVSH vertical upstroke: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Gjdezcpi Sjpfx Ai Nsuc Electrical connection rating with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control with 17" flat display Labelling with part graphics / label program / label printer PICA 104 Grooving program

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Max. panel length: 3800 mm Main saw blade projection: 55 mm No of Grippers: 4 Gjdeygtbtopfx Ai Neuc

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, HOLZMA Optimat HPP 380/43/43 panel dividing saw The HOLZMA Optimat HPP 380/43/43 is a powerful, CNC-controlled panel dividing saw for the industrial cutting of coated and uncoated wood-based panels. With a cutting length of 4,300 mm, the machine is ideally suited for processing standard and large-format panels in the furniture, kitchen, and interior design industries. Technical highlights: Cutting length: 4,300 mm Program carriage travel: 4,250 mm Main saw blade diameter: 380 mm Scoring saw blade diameter: 180 mm Gedpfx Aeza Eb Sji Nsuc Main motor: 13.5 kW Scoring motor: 2.2 kW 7 clamping devices Air cushion tables for easy material handling CADmatic control system Label printing system and optimization software Saw carriage feed up to 130 m/min Robust HOLZMA industrial quality with a scoring unit, automatic angle and return device, and CADmatic control system for precise and economical cutting.

Condition: used, machine/vehicle number: 008503, Max. panel width: 4300 mm Guedpfx Aijy Hcd Ee Noc Max. panel length: 4300 mm Main saw blade projection: 80 mm No of Grippers: 8

Condition: used, Year of construction: 1991, functionality: unexamined, Max. cutting length: 4100 mm Gujdpfxsy Hrqhe Ai Nec Air cushion tables

Condition: used, machine/vehicle number: 008514, Max. panel width: 4250 mm Max. panel length: 4300 mm Main saw blade projection: 95 mm No of Grippers: 7 Second flexible pusher: yes Godpfey Edn Aox Ai Nouc

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22 Guodpfxoy Hcd Ss Ai Nec

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Godpfx Aiewuck Is Nsuc Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: used, machine/vehicle number: 008208, Position 1: Front-Loading Panel Saws HOLZMA-HPP 510/43/43 + HEE 33/22 Position 2: Lift Table HOLZMA-HPP 510/43/43 + HEE 33/22 Gjdpfxjx A Thke Ai Neuc

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 0240070779, functionality: fully functional, input voltage: 380 V, input current: 48 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 80 mm, cutting width (max.): 4,100 mm, Equipment: documentation/manual, scorer, The machine is in good condition and can be inspected in operation at any time. Gjdpfoy Rznkex Ai Nsuc

Condition: good (used), Year of construction: 2012, Automatic panel saw for chip-free and dimensionally precise cutting of coated and uncoated wood-based panels and materials that can be processed like wood-based panels. Control panel on the right. Scoring saw Cutting length: 4300 mm Cutting width (program pusher travel): 3100 mm Roller tables: 4 pcs Two-finger clamping grippers Required space approx. 6520 x 6550 mm Gsdpfx Ajy N R Scsi Njuc Data taken from the documentation. All details without guarantee. Availability: Expected December 2026

Condition: used, machine/vehicle number: 008206, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm Gujdpfx Aiex A Tizo Nec No of Grippers: 9

Condition: used, machine/vehicle number: 008131, Max. panel width: 4400 mm Max. panel length: 4400 mm Main saw blade projection: 75 mm No of Grippers: 7 Gedpfx Asw Idh Hji Neuc

Condition: used, machine/vehicle number: 007538, Max. panel width: 4300 mm Gedpfx Aouwzupji Nouc Max. panel length: 4300 mm Main saw blade projection: 80 mm No of Grippers: 8

Condition: used, machine/vehicle number: 005106, Max. panel width: 4300 mm Max. panel length: 4250 mm Gsdpfx Ajyg Edmsi Nouc Main saw blade projection: 95 mm

Condition: ready for operation (used), Year of construction: 2007, controller model: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us. Additional equipment • Air cushion table with roller element 2160 x 650 mm: 4 pieces • Central blower: 1 piece Machine Benefits Qualitative Machine Benefits Gusdpfsyaiiyjx Ai Noc • Ce-certified, gs-certified, fph wood dust certified • Division: 75/275/475/1050/1850/2650/3450 mm measured from the angle rule to the center of the clamping collet • 2 additional two-fingered clamping collets possible • 4 manual trimming rakes at clamping collets • 1 additional one-fingered clamping collet possible • Jet spacing of air cushion tables: 70 x 70 mm Technical Machine Benefits • Pre-cut saw motor: 2. 2 kw • Operating voltage: 400 v / 50 hz • Electrical connection value at hs motor: 18. 0 kw = 24 kw, 21. 0 kw = 27 kw • Positioning accuracy: +/- 0. 1 mm/m • Surface-friendly material transport, lifetime positioning accuracy, no lubrication required, high program slider speed, maintenance-free, full stability of the steel table maintained, easy, cost-effective replacement of phenolic resin plates, minimal wear of the cylinders, uniform pressure application, minimal cutting = scratch cut, significant cycle time savings, top cutting quality, minimal setup times, reduction of cycle time, pressure strength electrically adjustable • Cutting length: 4300 mm • Cutting width (program slider travel): 4250 mm • Roller track (element 10-track): 1 piece • Roller track (element 2-track): 5 pieces • Clamping collets: 7 pieces (first 3 pieces two-fingered, all others one-fingered) Extra Information Machine still under power

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Gusdpfx Aefg Ewzsi Njc No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-240-14-5243, functionality: fully functional, cutting width (max.): 4,300 mm, cutting length (max.): 4,300 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Max. cutting length: 4,300 mm Max. cutting width: 4,300 mm MACHINE DETAILS Voltage: 400 V Power consumption: 38 A Fuse: 50 A EQUIPMENT Documentation available Godoxcnv Aspfx Ai Nouc CE marking present

Condition: used, machine/vehicle number: 008001, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 8 Guedpfowuz Tbjx Ai Noc

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-240-10-3388, functionality: fully functional, operating hours: 565 h, cutting width (max.): 4,250 mm, controller model: POWER CONTROL CADmatic 4 PROFESSIONAL, section length (max.): 4,300 mm, working height: 920 mm, Lightly used machine! TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Gsdjyla I Ropfx Ai Njuc Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angular accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main unit motor power: 13.5 kW Scoring unit motor power: 2.2 kW Mains voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction connection speed: approx. 26 m/s Negative pressure: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection—chip duct: 1 x 200 mm Extraction connection—pressure beam: 1 x 150 mm Operating hours: 565 h EQUIPMENT Power Concept Angle cutting package Groove-cutting package Automatic ejector rule Labelling package Data linkage to storage systems Note: Further details regarding machine configuration can be found in the attached document.

Condition: used, machine/vehicle number: 007618, Max. panel width: 4400 mm Gjdpfju N Slisx Ai Neuc Max. panel length: 4400 mm Main saw blade projection: 75 mm No of Grippers: 7

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-240-95-7986, Used panel saw HPP 300/43/43, fully refurbished INTEGRATED FEATURES: • Saw blade projection: 80 mm • Cutting length: 4,300 mm • Right-hand machine configuration • Machine table along cutting line with air cushion Gujdpfx Aoy A Rgasi Njc • 4 tables • Infinitely variable pressure bar control • 7 clamps • Main saw motor power: 11 kW • Scorer motor power: 1.5 kW • Labeling software • Saw carriage speed: 130 m/min • ECO Plus technology: Up to 20% energy savings MACHINE OPERATION: • Operating panel • CADMATIC 5 ADDITIONAL INFORMATION: • Data transfer via WLAN + USB • Label printer • Power Concept DOCUMENTATION: • Selected languages: German, English • Format: Data carrier + paper documentation GENERAL INFORMATION: • Control system: POWERCONTROL with POWERTOUCH • CE certification: Yes • Availability: Ready June / July

Condition: used, Year of construction: 2001, functionality: fully functional, power: 13.5 kW (18.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 125 mm, cutting width (max.): 3,200 mm, saw blade diameter: 450 mm, Equipment: CE marking, scorer, We are offering this used Holzma HPP 11/32 panel saw, year of manufacture 2001. Manufacturer: Holzma Model: HPP 11/32 Year of manufacture: 2001 The machine is in perfect working condition. Complies with CE safety standards. Automatic panel saw for chip-free and precise cutting of coated and uncoated boards made from wood-based materials and those that can be processed like wood-based panels. Rear machine table equipped with the appropriate number of combi-profile rails with rollers for easy and gentle handling of panels. Machine table features extensive, abrasion-resistant table supports, which are recessed at the clamping jaw positions. This ensures lasting table stability and consistent cutting quality. Saw blade feed direction: from left to right against the square fence. Technical specifications: Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW Max. clamping jaw opening: 130 mm Saw blade diameter: 450 mm Saw blade projection: 125 mm Saw carriage feed rate, forward: 5–100 m/min Return feed rate: constant 100 m/min Program carriage feed speed, forward/return: max. 80 m/min Compressed air: 6 bar Operating voltage: 400 V / 50 Hz Minimum extraction speed at extraction nozzle: approx. 28 m/sec Chip extraction connection: 1 x 200 mm Pressure beam extraction connection: 1 x 160 mm Minimum operating temperature: +5°C Maximum operating temperature: +35°C Cutting length: 3,200 mm Cutting width: 3,200 mm Dismantling and collection to be organized by buyer. Location for collection: A-8265 Kroisbach an der Feistritz Godeyxqigepfx Ai Nouc If you have any questions or require further information, please feel free to send us a message or call us.