Used Feeding Trolley for sale (13,210)

Condition: ready for operation (used), A total of four feeder trolleys are available for ASM/Siplace. Documentation available. On-site inspection is possible. Nwodpsv I U H Ajfx Akion

Condition: used, machine/vehicle number: 3045,

Condition: ready for operation (used), functionality: fully functional, L & Z Lathe WEILER Matador -Center height 140mm Nwsdsz Nltdjpfx Akijn -Distance between centers 500mm -Speed range (continuously variable speed adjustment) 25-3000 RPM -Spindle bore approx. 36mm -Automatic longitudinal and cross feeds -Thread cutting / Metric / Inch, etc. -Tailstock / Morse taper MK3 -Electric chuck guard -Multifix with insert -Three-jaw chuck with interchangeable jaws -Machine feet -Change gears -Drill chuck & rotating center -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight approx. 600 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, L & Z lathe / WEILER CONDOR AC / Stepless speed control / FROM AN EDUCATIONAL INSTITUTION - CE marking - Year of manufacture: 2000 - Swing over cross slide: 180 mm - Distance between centers: 165 mm - Max. swing: 330 mm Njdpfjz Izi Djx Akiown - Turning length: approx. 800 mm - Speed (stepless): max. 2800 rpm - Automatic longitudinal / cross feeds - Threading / Metric / Inch etc. - 3-jaw chuck - Tailstock - Chip guard - Machine light - Multifix base and 6 inserts - Various change gears - Coolant system - Various operating tools - Documentation Dimensions: L x W x H: 1.8 x 1 x 1.8 meters / Weight: 1300 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, L&Z Lathe KMUTH BASIC Plus incl. 3-axis digital display - Year of manufacture 2011 - CE marking - Three-axis digital display - Center height 150mm - Max. turning diameter 300mm - Max. turning diameter over support 178mm - Max. turning diameter without bridge 430mm Nsdpfsz Hwx Ejx Akiewn - Center distance 810mm - Spindle bore 38mm - Spindle speeds (geared) 60 - 1550 rpm (9 steps) - Automatic longitudinal / facing feeds - Spindle mount - Camlock D1 - 4" - Tailstock taper MK 3 - Quill travel 100mm - Bed width 180mm - Multifix base with insert - Electric chuck guard - Work light - Coaxial center - 3-jaw chuck - 2 x steady rests - Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 550 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, L & Z spindle lathe / WEILER CONDOR B / incl. Heidenhain 3-axis digital control - Machine from an educational institution / in perfect condition - Three-axis Heidenhain digital control - Center height 165 mm - Swing over bed 330 mm - Swing over cross slide 185 mm - Turning length approx. 800 mm - Spindle speeds (geared) 22 - 2800 rpm Nwjdpoz St Iujfx Akisn - Thread cutting / Metric / Inch, etc. - Bar capacity 40 mm - Tailstock / Morse taper MK 3 - Electric chuck guard - Multifix base holder with inserts - Three-jaw chuck Forkardt - Machine lamp - Chip guard - Bed stop - Machine feet - Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1100 kg Errors and omissions excepted.

Condition: used, Year of construction: 1972, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: PBR Nwedpfx Ao Aa Azlokijn Type: TM 450/2000 Machine Type: Precision draw and feed spindle lathe Machine Weight: approx. 7.9 t Working Area Turning diameter over bed: 980 mm Turning diameter over carriage: 600 mm Turning length: 2,200 mm Turning diameter in the pit: 1,200 mm Pit length: 450 mm Spindle Spindle bore: 150 mm Speed stages: 24 Speed range: 8–800 rpm Axes and Travels X-axis: 2,000 mm X²-axis: 350 mm Y-axis: 500 mm Feeds Feed stages: 108 Longitudinal feed: 0.032–15.2 mm/rev Cross feed: 0.016–7.6 mm/rev Thread Cutting Number of thread pitches: 398 Metric thread pitch: 0.5–224 mm Metric thread pitch: 0.25–112 mm Imperial thread pitch: 56–1/8 TPI Diametral Pitch: 112–1/4 D.P. Tailstock Arbor support: MK 6 Arbor travel: 380 mm Electrical Data Voltage: 380 V Frequency: 50 Hz Total power requirement: 25 hp Dimensions Footprint: approx. 4.4 × 1.8 × 1.7 m EQUIPMENT Original Forkardt 3-jaw chuck, 500 mm Hardened and ground bed guides Rapid traverse for longitudinal and cross feeds Spindle brake Original Sauter hydraulics with external oil supply Original Ideal tool holder Faceplate with 4 independent jaws Coolant system Magnetic clutch Automatic longitudinal stops Cross stop Thread dial Reducing sleeve 2 fixed centers Fixed steady rest Swiveling Staudacher spindle guard with safety switch 2 emergency stop buttons Main switch Chip collector Workpiece lighting Machine-mounted control cabinet

Condition: ready for operation (used), functionality: fully functional, Weiler Matador lead and draw spindle lathe Nedpfx Akjztbbtoijwn -Distance between centers: 500 mm -Swing over bed: 140 mm -Automatic longitudinal/cross feeds -Thread cutting / metric, inch, etc. -Spindle bore approx. 36 mm -Spindle head: Size 5 -Speed range: (geared) 15–3,550 rpm -Brake motor -Coolant pump -Chuck guard -Forkardt F 160 collet chuck -Quick-change tool holder Multifix & insert -Drill chuck -Follower rest -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted

Condition: good (used), For sale: an industrial set for producing briquettes from sawdust and other suitable wood materials. The offer includes two hydraulic briquetting machines, MALISZ RB440, along with a feeding system and accessories as shown in the pictures. The set includes: - 2 × hydraulic briquetting machine MALISZ RB440, - a feeding system for supplying material. TECHNICAL DATA AND PERFORMANCE - Manufacturer: MALISZ GbR Maschinenbau, Germany - Model: RB440 – 2 units - Year of manufacture: 2006 and 2007 - Catalog performance of the model: approx. 440–500 kg/h per machine - Estimated total performance of two machines: approx. 880–1000 kg/h. The stated performance is approximate and depends, among other things, on the type, granulation, and moisture content of the raw material. - Type of pressing: hydraulic - Power supply: 400 V, 50 Hz - Rated current indicated on the nameplate: 70 A per machine - Protection class: IP54 - Briquette shape: cube - Automatic control and feeding system as shown in the pictures RB440 type briquetting machines are designed for industrial briquette production. The set can be used as equipment in a wood processing plant, sawmill, or installation utilizing sawdust and wood waste. The sale includes both briquetting machines and the feeding system. Njdo Afq A Ujpfx Akiewn

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Swinging diameter over bed: 480 mm Swinging diameter over cross slide: 200 mm Turning length: 650 mm Maximum turning diameter over bed cover: 200 mm Distance between centers: 750 mm Spindle Spindle head: Size 6 Spindle bore: 58 mm Control Njdpfxe Aa Nauj Akijwn CNC path control: 2 axes Control system: Siemens SINUMERIK 5T Threading: available Motor control cabinet: Siemens 810T Tailstock Taper in tailstock quill: MK 4 Tailstock quill travel: max. 200 mm Tailstock travel: 550 mm Performance data Total power requirement: 18 kW Machine weight: approx. 2.7 t Machine dimensions Space requirement: approx. 2.70 × 1.58 × 1.68 m Control cabinet Control cabinet dimensions: 800 × 400 × 2,300 mm Control cabinet weight: 150 kg Motor control cabinet dimensions: 800 × 900 × 1,000 mm Motor control cabinet weight: 200 kg EQUIPMENT 4 chucks Spax screws Sheet metal screwdriver Drill Drill bits

Condition: used, total length: 11,500 mm, total width: 2,450 mm, total height: 2,600 mm, Colour: Green Empty weight: 16.500 kg Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1400 - Max. workpiece height [mm]: 140 Nwsdpfewnhvvox Akijn - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Cylinder diameter [mm]: 85 - Working pressure [kg/cm²]: 4 - Heating type: Oil heated - Voltage [V]: 400 - Transport dimensions: 11500mm x 2450mm x 2600mm (l x w x h) - Transport weight [kg]: 16500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20,000 h, functionality: fully functional, overall weight: 15,000 kg, rotor diameter: 500 mm, rotational speed (max.): 200 rpm, power: 90 kW (122.37 HP), input voltage: 400 V, type of input current: three-phase, The MeWa Universal Granulator UG 1000 is a high-performance, stationary single-shaft secondary shredder, specifically designed for the fine shredding and recycling of various composite materials and waste. The machine operates according to the principle of a guillotine shear, in which the material is cut between rotating and stationary blades. Nsdpfxjz Antus Akiewn Drive power: 90 kW Cutting chamber / working width: 1,000 mm Number of blades (rotor / stator): 25/5 blades Rotor diameter (circle of rotation): 500 mm Total weight: approx. 15 tons Screen size: Flexible, interchangeable screens under the rotor determine the final particle size (typically between 10 mm and 80 mm).

Condition: refurbished (used), functionality: fully functional, Hand feeding production Booklet maker, stitching, folding and front edge trimmer, Nwsds Afbn Uopfx Akien automatic settings to the paper format, min. paper format 230 x 120mm, max. paper format 520 x 350mm, two Hohner 48/5S BDH stitching heads, head and corner stitching possible. Machine is ideal for offline hand feeding booklet maker. Most of the belts and other wear parts were replaced. It is tested and in a good working condition.

Condition: ready for operation (used), functionality: fully functional, WEISSER HEILBRONN Junior / L & Z lathe with Heidenhain digital control -Center height 220mm -Turning diameter over bed 440mm -Distance between centers 1000mm -Spindle bore approx. 50mm -Spindle speeds 40 - 2000 rpm -Automatic longitudinal / facing feeds Njdpfx Aszwggvjkijwn -Threading / Metric / Inch, etc. -Heidenhain digital display ND 780 -Forkardt F250 3-jaw chuck -Multifix base and inserts -Electric chuck guard -Follow rest -L & Z spindle cover -Work light -Documentation Dimensions: L x W x H 2.6 x 1.3 x 1.8 meters / Weight approx. 1800 kg Errors and omissions excepted.

Condition: ready for operation (used), Hello, I have a metal platform for sale. Dimensions: 6m x 3.12m Weight: 2825kg I have a total of 30 units available. Nedpfxo Af Ncdo Akiown The platforms are located in Germany, DE-63791 Karlstein am Main. The stated price is for 1 unit.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,000 kg, COMPLETE FEEDING LINE 3v1 UNCOILER + STRAIGHTENER + FEEDER Type CR-AP 400 Year 2013 width = 400 mm thickness minimal 0,5 mm thickness max = 3,0 mm 9+2 straightener rollers UNCOILER: model SM15 Year 2013, motorized, hydraulic expansion pressure arm coil width 400 mm Nsdpfx Akjz S T Sgoiewn Decoiler capacity 1500 kg The feeding straightener straightens the material and feeds it into the press. The "CR AP" series features an opening head for easier roller cleaning and pilot release. This type of machine is suitable for working with medium-thickness strips.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Nodpfx Akezyx Evsiown Data partially estimated and taken from the brochure.

Condition: not inspected (used), machine/vehicle number: 42893, Lead screw and feed spindle lathe, manufacturer: ZMM/Bulgaria, type: L400 TS, serial number: 42893, year of manufacture: unknown, turning length: 1,000 mm, up to 2,180 rpm, 3-axis digital display, manufacturer: Facor, Multifix steel tool holder, coolant system, tailstock, light, splash guard, 3 steady rests, 4-jaw chuck, accessories. Nwjdpfjz R Nalox Akijn

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Nwodpfszvdk Asx Akijn Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), CATALOG NUMBER 7541 Technical specifications: - max. diameter of the main blade (without scoring blade) 400mm - max. diameter of the main blade (with scoring blade) 350mm - blade bore diameter 30mm - max. cutting height for a 400mm blade - 90 degrees - 120mm, 45 degrees – 85mm - max. cutting height for a 350mm blade - 90 degrees – 95mm, 45 degrees – 67mm Njdpfx Ajztavvokiewn - main blade adjustable up/down and at an angle - blade guard - with side carriage - cutting length on the carriage 1700mm - cutting width on the carriage 1400mm - cutting width with the guide 1350mm - main motor 6kW - table dimensions 1190x990mm - with extension 1880mm - with lengthening 1890mm - with scoring blade - max. diameter of the scoring blade 120mm - diameter of the scoring blade spindle 20mm - scoring blade motor 0.75kW - 3 types of rotational speeds 3500, 4500, 6000 rpm - brake - diameter of the dust extraction nozzle 80, 120mm - dimensions (length/width/height) 3050x2200x1600mm - weight 800kg ADVANTAGES – Made in Poland – DTR documentation – Blade guard – With scoring blade – With extension and widening – Used saw, very good condition Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 1989, 3 St. 110 mm Weight 30 kg Used Machine Njdpfx Akjzr Rqzsijwn Year of Manufacture: 1989 Features and Technical Specifications: - Type 76 feed unit for table saws and panel saws of various makes - For safe cutting of solid wood strips, planks, window stiles, etc. - With adjustable mounting profile, 3 feed rollers, and 2 fixed speeds - Quick adjustment to workpiece height via a handwheel - With dust extraction connection for dust-free operation, including plug - With rail for mounting heights from 18 to 40 mm - Quick and easy (tool-free) installation and removal - Transparent, swing-away guard for optimal visibility and ergonomic operation when cutting moldings - Supply voltage: 400 V / 50 Hz - Weight: approx. 30 kg

Condition: good (used), Year of construction: 2006, Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley Nwodpfxswrbz Te Akisn -Manufacturer: Konecranes, electric chain hoist with powered trolley -Chain hoist: Type XN10 1604 b1 load capacity 1600 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5.4 m -Crane chassis: TDV 1600 20/5 m/min -Carrier width: max. 310 mm -Dimensions: see photo technical drawing -Transport dimensions: 1200/700/H550 mm -Weight: 110 kg

Condition: excellent (used), functionality: fully functional, Type Z smoking cart (5-level) Type: Type "Z" smoking cart 5 levels/shelves Nodpfe Aarn Usx Akijwn Rod length: 1000 mm 200 units available The professional, 5-level Type "Z" smoking cart is essential equipment for any meat processing plant, butcher shop, smokehouse, delicatessen, or fish processing plant. The "Z" design allows for modular nesting of empty carts, one inside the other (so-called stacking/nesting), which can save up to 70% of storage space in the facility during downtime or cleaning. The cart has 5 levels equipped with profiled recesses (teeth) that secure the smoking rods, preventing them from shifting during transport and ensuring uniform spacing between smoked meats, sausages, or poultry. The appropriate vertical space between the shelves guarantees free circulation of smoke, steam, and hot air inside the smoking and cooking chamber, resulting in perfectly even coloring and cooking of the products.

Condition: used, Year of construction: 2002, functionality: unexamined, inner dimension length: 865 mm, inner dimension width: 875 mm, inner dimension height: 1,980 mm, We offer these used Heuft 10.12,5.08 and 10.12,5.10 baking carts and peel board carts, manufactured in 2002. Manufacturer: Heuft Model: 10.12,5.08 and 10.12,5.10 Year of manufacture: 2002 Condition: used If you have any questions or require further information, please do not hesitate to send us a message or call us. No. | Cart Type | | | | Width/Depth/Height ---|---|---|---|---|---| 400 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 401 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 402 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 403 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 404 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 Nwjdjzf Hiajpfx Akijn 405 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 406 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 407 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 408 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 409 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 410 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 411 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 412 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 413 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 414 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 415 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 416 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 417 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 418 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 419 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 420 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 421 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 422 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 423 | Peel board cart | VTR 10.12,5.08 | | | 865 | 875 | 1980 426 | Baking cart | VTR 10.12,5.10 | | | 1065 | 650 | 1930 427 | Baking cart | VTR 10.12,5.10 | | | 1065 | 650 | 1930 428 | Baking cart | VTR 10.12,5.10 | | | 1065 | 650 | 1930 429 | Baking cart | VTR 10.12,5.10 | | | 1065 | 650 | 1930 430 | Baking cart | VTR 10.12,5.10 | | | 1065 | 650 | 1930 431 | Baking cart | VTR 10.12,5.10 | | | 1065 | 650 | 1930 432 | Baking cart | VTR 10.12,5.10 | | | 1065 | 650 | 1930 433 | Baking cart | VTR 10.12,5.08 | | | 1065 | 650 | 1930 434 | Baking cart | VTR 10.12,5.08 | | | 1065 | 650 | 1930 435 | Baking cart | VTR 10.12,5.08 | | | 1065 | 650 | 1930 436 | Baking cart | VTR 10.12,5.08 | | | 1065 | 650 | 1930 437 | Baking cart | VTR 10.12,5.08 | | | 1065 | 650 | 1930 438 | Baking cart | VTR 10.12,5.08 | | | 1065 | 650 | 1930 439 | Baking cart | VTR 10.12,5.08 | | | 1065 | 650 | 1930 440 | Baking cart | VTR 10.12,5.08 | | | 1065 | 650 | 1930 441 | Baking cart | VTR 10.12,5.08 | | | 1065 | 650 | 1930 442 | Baking cart | VTR 10.12,5.08 | | | 1065 | 650 | 1930 443 | Baking cart | VTR 10.12,5.08 | | | 1065 | 650 | 1930

Condition: used, Year of construction: 2001, functionality: fully functional, Gassner closure feeding system with pneumatic lifting station and blower Air transport filter system Special price due to warehouse clearance: €3,600 ex works Külsheim. Nsdpsww Hvmofx Akiswn