Used Hicom 200 for sale (15,948)

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley Iijdpfxszcax Rs Aa Ioc all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Condition: new, new ! all stainless steel closed lid with seal 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Iiodpfx Aajzcax De Iec Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: excellent (used), We offer a climate test chamber for sale. Air-cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: +5 to +100 °C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climate range: +10 to +95 °C Humidity range: 10 to 95 % RH Humidity change rate: ≤ ± 3.0 Water connection for humidifier: Tap water or distilled water, 20-liter reservoir Power connection: 400 V 3/N/PE, AC, 50 Hz Iiodszd R T Tepfx Aa Iec Maximum power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a For your peace of mind as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances: < 40% of the lower explosive limit (LEL). Iodezd Rrcjpfx Aa Ioic Maximum temperature of the heating surface: over 750 °C. Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 sec. Enhanced recirculating air flow rate: 33 m3/h Total steam space: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TB) fixed at 300 °C Temperature selector limiter (TWB) adjustable above the nominal temperature by 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB): 1 Temperature selector limiter (TWB): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60Hz Rated current: 12.0 A, rated power: 6.0 kW, connected load: 7.0 kW Weight: 275 kg Type: LTU 60/60 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1998, chuck outer diameter: 300 mm, through hole: 70 mm, Metal cutting Tooling MANDELLI - 200 MACH-ID 2998 Make: MANDELLI Isdpfozdig Usx Aa Ioic Type: 200 Year: 1998 Diameter: 300mm 4 chuck: x Spindle bore:70mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), through hole: 50 mm, three-jaw chuck diameter: 200 mm, Metal cutting Tooling CBT - 200 MACH-ID 3000 Make: CBT Type: 200 Year: 2001 Diameter: 200mm 4 chuck: x Spindle bore:50mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Iisdpfszdifwjx Aa Isc

Condition: used, Manufacturer : DMN Model : BL 200/1 Type : Rotary valve External diameter : 345 mm Nominal diameter : 205 mm Iiedpfx Asx R Axwea Ioc Leroy Somer motor : 0,75 KW Atex class : EX II 20 Tightness : Air purge

Condition: excellent (used), Here, we offer a SUN-TEC cleanroom technology heating plate. SUN-TEC cleanroom technology heating plate Cleanroom workstation with heating plate 1600 mm x 1200 mm x 2200 mm Rated voltage: AC 200V, 3 phases, 50Hz, 30A Max. temperature: 200°C Iodpfx Aezdqbqsa Ioic Type: Y9AT417 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS temperature shock test chamber for temperature change and shock testing in industry, research, and development. Technical data: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Changeover time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection class: IP 22 Refrigerant: R404A: 2.3 kg / R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Further data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male Equipment: Two-chamber system (hot / cold chamber) Digital CTS control Display / control panel Program operation Operating hour counter Observation window Interior lighting Temperature limiter Iodpjy I Ntcofx Aa Ijic Test specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick start guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Optical condition see pictures Scope of supply as shown in the pictures Inspection possible by appointment. Loading can be organized. Commercial sale (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display (digital) 2-zone system Mobile frame for quick changeover Isdoy H Hk Aspfx Aa Ioic Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chambers Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and piping diagram Spare parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Delivery Test chamber TSS-70/350-A Documentation (if available) Inspection possible by arrangement. Loading and transport can be arranged on request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2008, Technical details: spindle diameter: 200 mm x-travel: 10000 mm y-travel: 4000 mm z-axis: 1500 mm W-axis (spindle longitudinal): 1000 mm bore spindle turning speed range: 1 - 2000 U/min dimension of the ram: 600 x 530 mm high speed spindle taper ISO: 60/50 rapid motion - x-axis: 8000 mm/min rapid motion - y-axis: 8000 mm/min rapid traverse Z-axis: 5 m/min total power requirement: 120 kW weight of the machine ca.: 135 t dimensions of the machine ca.: 16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 Iodpfxjw S Nn Hj Aa Isic hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment *

Condition: excellent (used), Gea combiGrind 200 frozen block grinder. In lovely condition. Has been fully checked over. stainless steel worms. Iijdpfxey U Hrio Aa Iec

Year of construction: 2008, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Full enclosure Measuring probe for complete measurement of the tools Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A Loader for up to 6 eroding disk sets (tool changer) Alphanumeric keyboard Standard programs for measuring, eroding Cooling and cleaning device for dielectric Automatic fire extinguishing device Extraction N183 1 exchange element 1 flushing set 1 measuring mandrel 1 mounting flange for rotating electrodes X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Iodpfx Aaozdinks Ieic Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm Iijdpfxjtt Da Is Aa Isc OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: new, Manufacturer: IBC roller bearings Type: ARTB 200 Design: Axial-radial bearing Inner diameter: 200 mm Outer diameter: 300 mm Width: 45 mm Article number: 221691 Drawing number: 90210001802 Ijdpezd Rc Iofx Aa Ieic Marking: 13SS1R unused, original packaging

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 5,000 rpm, travel distance X-axis: 234 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 625 mm, controller manufacturer: MAZATROL, controller model: Mazatrol SmoothG CNC, workpiece diameter (max.): 695 mm, This 4-axis Mazak QUICK TURN COMPACT 200 MSY L was manufactured in 2018. It features a maximum swing of 695 mm and a machining diameter of 380 mm. Equipped with a Mazatrol SmoothG CNC control system, it ensures precision and efficiency. The main spindle supports up to 5000 rpm, while the second spindle reaches 6000 rpm. A great opportunity to buy this Mazak QUICK TURN COMPACT 200 MSY L lathe. Contact us for further details. Machine Benefits Technical Machine Benefits Iiedpfx Ajyk Tg Rea Iec 1. Capacity:- Maximum Swing: 695 mm- Maximum Machining Diameter: 380 mm- Maximum Bar Work Capacity: 65 mm2. Spindle:- Main Spindle Chuck Size: 8 inches- Main Spindle Maximum Speed: 5000 rpm- Second Spindle Chuck Size: 6 inches- Second Spindle Maximum Speed: 6000 rpm3. Turret:- Number of Tools: 12- Maximum Speed: 5000 rpm4. Axes Travel:- X Axis: 234 mm- Y Axis: 100 mm- Z Axis: 625 mm- W Axis: 585 mm5. Control System:- Mazatrol SmoothG CNCInstalled Options : EIA / ISO programming Spiral machining EIA 3D compensation Rotation function Geometric functions Scaling External data I/O Shape compensation Thread cutting cycle Sub C-axis control Inverse time feed Polar coordinate input G54.1 additional work offsets Synchronous mill tapping Variable 600 macro sets Cylinder & polar coordinate interpolation EIA helical tap cycle EIA pattern cycle Seamless corner control Variable acceleration control Rapid overlap Lead error compensationMachine Hours : Power on time: 12,929 h Auto operation time: 17,565 h Auto cutting time: 15,375 hEquipment included: Turrets: 2 × revolver head – one on each side of the machine Driven tools: 1 × driven tool on the Z axis 1 × driven tool on the X axis Tool holders: Fixed holders for drilling Fixed holders for external turning Extra Information Full equipped version with C axis / Y axis / Subspindle / Long bedMachine still under power

Condition: excellent (used), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heating Cabinet Description: For sale is an industrial tempering oven / heating cabinet manufactured by Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. The large usable chamber allows for processing of large or multiple components simultaneously. The oven is controlled via a JUMO IMAGO 500 system, enabling precise temperature control as well as automated programs. Typical applications: - Industrial manufacturing - Plastics and metals processing - Component drying - Heat treatment - Testing technology / materials testing - Laboratory and research applications The system is built with heavy-duty industrial quality and designed for continuous operation. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Ijdpfoytrzfjx Aa Isic Temperature safety classes: TB Class 1 TWB Class 2 Chamber: Usable volume: 11.25 m³ Internal dimensions: Width 2000 mm x Height 2500 mm x Depth 2250 mm External dimensions: Width 2900 mm x Height 3530 mm x Depth 2700 mm Load capacity: Interior load capacity: 400 kg Floor surface load: 1000 kg Weight: Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated current: 90 A Nominal power: 54 kW Connected load: 58 kW Additional data: Minimum exhaust air volume flow: 600 m³/h Reduced exhaust air volume flow: 150 m³/h Purge time: 465 s Total steam volume: 14.9 m³ Sound pressure level: < 70 dB(A) Safety temperature limiter cutoff temperature: 280 °C Adjustable temperature limiter: 270 °C Weight: 1850 kg Condition: Used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, The Nordson FoamMelt 200 (FM 200) is a specialized dispensing system that mixes hot melt adhesives with an inert gas (such as nitrogen) to create a closed-cell foam. This process reduces adhesive consumption by as much as 50% to 65% while improving bond performance. Applications: Widely used for bonding, sealing, gluing, and gasket making (gasketing) in the automotive and packaging industries. Benefits of FoamMelt Technology Faster Curing: Iiedpsy N Ahcsfx Aa Ijc The foam cools down faster, enabling higher production speeds. Better Filling Properties: The volume increase due to gas makes it ideal for filling gaps. Improved Safety: The lower heat density of the foam reduces the risk of burns for operators.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2019, total length: 14,040 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,050 mm, color: grey, Year of construction: 2019, Axle Configuration Tire Size: 385/65R22.5 Axle Brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear Axle 1: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Rear Axle 2: Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 50% Rear Axle 3: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 7,300 kg Payload: 34,700 kg GVW: 42,000 kg Maintenance Isdpfx Aaezfg Ehs Ijic APK (Technical Inspection): valid until 01/2027 Identification License plate: OX-26-BB Additional Information Please contact Bob Beukers for further information.

Year of construction: 1995, condition: ready for operation (used), pressing force: 204 t, Hydraulic press manufactured in 1995. This EXNER EX SBR 200 features a pressing force of 2000 kN and a drive power of 78 kW. With an oil capacity of 1400 liters and a weight of 52000 kg, this machine is designed for robust performance. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 200 hydraulic press we have for sale. Contact us for further details. - Pressing Force: 2000 kN- Drive Power: 78 kW- Oil Capacity: 1400 ltr.- Overtravel Distance: 56 mm- Weight: 52000 kg- Safety Distance: 235 mm- Overtravel Time: 147 ms Ijdezd Ewgepfx Aa Isic

Year of construction: 1997, condition: ready for operation (used), overall weight: 12,500 kg, pressing force: 204 t, stroke length: 400 mm, Hydraulic 4-Column Press manufactured in 1997. This August Luigart & Sohn GmbH & Co. KG (ALN) 4 SPY 200 SO features a press force of 2,000 kN and a stroke of 400 mm. It has a tool clamping area of 1,460 × 890 mm and a maximum upper tool weight of 2,500 kg. If you are looking to get high-quality metal pressing capabilities, consider the August Luigart & Sohn GmbH & Co. KG (ALN) 4 SPY 200 SO machine we have for sale. Contact us for further details. • Manufacturer: August Luigart & Sohn GmbH & Co. KG (ALN) • Machine Type: Hydraulic 4-Column Press • Hydraulic Pressure: 285 bar • Opening Height: 800 mm • Main Motor Power: 32.5 kW Isdpfx Aszd Efdea Ioic • Voltage: 415 V • Frequency: 50 Hz • Tool Clamping Area: 1,460 × 890 mm • Max. Upper Tool Weight: 2,500 kg • Oil Capacity: approx. 850 L

Condition: good (used), Year of construction: 1997, Compressor Kaeser DS 200 Year : 1997 110 kw Iiodepgv Uzjpfx Aa Iec Block visc changé à 44 000 heures Number of hours in charge : 2 500 hours

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Iiodpfxswtmi Es Aa Isc Type PPBL 200/40 Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg Iiedszauxgjpfx Aa Iec If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE200TN7400697, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Iiedpfx Aaoxq Uqce Isc Weights Empty weight: 1.931 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 335 x 117 x 175 cm CE mark: yes Other information Fuel consumption: 34.2 Liter per Hour at 75% Load Generator: Caterpillar A2635L41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 325 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank