Used Hicom 200 for sale (16,058)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Hjdpfx Aozru Ukel Tenr Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder Hnjdpfozr Hcaox Al Ter -Punch tool: Notching tool -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 200/120/H150 mm -Weight: 13 kg

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,997 kg, first registration: 05/2016, loading space length: 6,900 mm, loading space width: 2,480 mm, color: red, Year of construction: 2016, Axle brand: BPW 10-ton drum axle Front axle: Max. axle load: 10,000 kg; Steerable Hjdpsziz Dtefx Al Tjnr Maximum rear axle load: 9,997 kg Unladen weight: 3,880 kg Payload: 16,200 kg GVWR: 20,000 kg Loading platform height: 112 cm Technical condition: good Optical condition: good

Condition: used, Year of construction: 2008, Technical details: turning diameter: 410 mm turning length: 500 mm control: Fanuc 21i TB standard turning diameter: 275 mm travel -x axis: 277 mm travel -y axis: 82 (±41) mm travel -z axis: 500 mm Spindle 1 RPM: 4500 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 65 mm turret stations / rotary tool stations: 12/12 Power rotary tools: 5,5 kW RPM of rotary tools: 6000 1/min total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m collet chuck: Hainbuch Accerories Chip conveyor Robot interface High precision Turning and Milling Centre with Y-axis and robot loading. Stäubli Robot for shaft loading. * Hnodpfx Aljzd Un Is Tjr

Condition: used, Year of construction: 2015, Technical details: turning diameter: 65 mm turning length: 120 mm Hnjdpfoyxpadex Al Tsr control: Index C200-4D SL z-axis main spindle travel: 390 mm z-axis subspindle travel: 390 mm x-axis subspindle travel: 600 mm Travel Y1: ± 80 mm Travel y2: ± 80 mm x-axis rapids: 45 m/min y-axis rapids: 15 m/min z-axis rapid travel: 45 m/min Spindle 1 RPM: 5000 1/min Spindle 1 Power: 35,5/27,5 kW Spindle 1 Torque: 170 /125 Nm Spindle 2 RPM: 5000 1/min Spindle 2 power: 35,5/27,5 kW Spindle 2 torque: 170/125 Nm c-axis: 0,00014 ° bar material dia.: 65 mm spindle nose: AD 140 spindle bore: 85 mm Milling spindle 1 RPM: 18000 1/min Milling spindle 1 power: 11 kW Milling Spindle1 torque: 19 Nm Milling spindle 2 RPM: 18000 1/min Milling Spindle 2 power: 11 kW Milling spindle 2 torque: 19 Nm B-axes swivel angle: 230 ° B-axes torque: 440 Nm B-axes angle resolution: 0,001 ° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 tool magazine static tools : 6 x VDI 25 internal coolant system feed: Knoll 80 bar / Ecofluid weight of the machine ca.: 16,3 t dimensions of the machine ca.: 3,73x2,92x2,58 m Accerories Chip conveyor Spindle 1 Chuck SMW HFKN 165-46 mm Spindle 2 Chuck SMW HFKN 165-46 mm Collet chuck main spindle Hainbuch Spanntop Collet chuck subspindle Hainbuch Spanntop Barfeeder Interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main- and sub-spindle Conveyor for partsdisposal Air Filter Büchel High performance heavy duty turning and milling center with 2 multi axis milling heads and two spindles. Both milling heads are full 5-axis. The z-axes are installed in the spindle heads The x2 axis is installed in the spindle head of the subspindle Milling1 head has x/y/b -axes Milling head 2 has y/b-axes Both milling heads have B-(Swivel-)axis 230° The machine is equipped with an IRCO short barfeeder and parts gripper for finished parts. Max. dim for finished parts: Ø 65 mm, length 120 mm, weight 5 kg. Rest piece length 200 mm All linear- axes are equipped with linear scales. Coolant through main and subspindle. Tool breakage control from drill Ø 1mm All existing tool from machine are part of delivery Machine is in excellenten Condition! *

Condition: refurbished (used), Risco 200 litres mixer Product capacity 100 / 150 litres Twin paddle mix arms Hnodszmaahspfx Al Tsr End door discharge Forward and reverse mix arms Refurbished condition

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21/A186898, power: 141.7 kW (192.66 HP), overall weight: 628 kg, total width: 1,020 mm, total height: 2,385 mm, type of input current: AC, input voltage: 230 V, nominal heat output: 141.7 kW (192.66 HP), temperature: 90 °C, fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, Equipment: documentation/manual, hot water, type plate available, Professional ACV HeatMaster 200 N Boiler – 141.7 kW – Year 2021 Hnjdeztz H Ajpfx Al Ter For sale: used ACV HeatMaster 200 N boiler, manufactured in 2021. High-capacity boiler with integrated domestic hot water production, suitable for commercial buildings, public institutions, hotels, farms, workshops, and installations requiring significant heating and hot water needs. Key features: Brand: ACV Model: HeatMaster 200 N Year: 2021 Maximum useful power: 141.7 kW Maximum input power: 154 kW Fuel used: propane (LPG) Domestic hot water tank: 400 liters Primary circuit capacity: 241 liters Maximum temperature: 90 °C Maximum heating pressure: 3 bar Maximum domestic hot water pressure: 8.6 bar Electrical supply: 230 V / 50 Hz Dry weight: approximately 628 kg Boiler currently disassembled. It was in operation before disassembly. Propane burner included. Some or all of the peripheral equipment from the previous installation may also be available: tank(s), circulators, valves, and piping components. To be discussed with the buyer based on their needs. Nameplate available. Additional photos available upon request. Heavy equipment: transportation is the responsibility of the buyer. Possibility to discuss loading arrangements. Price: €7,500 excluding VAT, negotiable.

Condition: ready for operation (used), Year of construction: 2006, Prinzing beading machine Type SME 200/11 year of construction 2006 throat 1100 mm connected load 5,5KW max. sheet thickness 1.5 mm VA Siemens Siematic OP7 control Special equipment: -parallel top roller feed with bearing-mounted work rollers -stepless drive motor -motorised top roller feed, infinitely adjustable sensor-controlled feed for automatic operation Hnodpfxeh Hgdre Al Tsr Table-top version of sheet guide device Total weight 6700 kg The offer is only addressed to dealers in accordance with § 14 of the BGB (German Civil Code). No Sales to private persons

Condition: like new (used), The Supfina 200 superfinishing device is an attachment for processing cylindrical shafts using stone finishing techniques. It is suitable for machining pre-ground or finely turned surfaces. The device performs an oscillating motion; workpiece infeed is realized via a pneumatic cylinder or via the lathe’s support. Its easy mounting on a lathe makes the Supfina 200 superfinishing device particularly suited for repair operations, single-part production, and small batch manufacturing. The device is very robust, making it well-suited for continuous and multi-shift operation. The oscillation stroke, infinitely adjustable between 0 and 5 mm, remains almost constant even under load. This allows grooving operations between shoulders to be carried out cleanly and without overlapping stroke, even with narrow reliefs (less than 1 mm). For economical machining, diameters from 1 to 300 mm are recommended for short workpieces. Hsdpszuv I Defx Al Tenr

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1 Hodpfxsycckcs Al Tjnr

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Hnjdpeyvgf Defx Al Tor Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Condition: used, mileage: 144,590 km, power: 110 kW (149.56 HP), first registration: 08/2021, tire size: 215/65R17 99V, axle configuration: 4x2, color: other, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2021, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional options and equipment = - CD player - Speed limiter - Alloy wheels - Rear-view camera - Alternating current = Further information = Tyre size: 215/65R17 99V Brakes: Disc brakes Suspension: Leaf suspension Front axle: Steered; left tyre tread: 35%; right tyre tread: 35% Rear axle: left tyre tread: 50%; right tyre tread: 50% Damages: none Hjdpfjzra Ipsx Al Tsnr

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Hjdpfx Ajzr U Ausl Tjnr Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2023, functionality: unexamined, GEA Hilge MAXA stainless steel centrifugal process pump in excellent condition. Specifications: Manufacturer: GEA Hilge Type: MAXA 200-400 CNY 200/200/55/4 Year of manufacture: 05/2023 Capacity: 280 m³/h Head: 20 m Motor power: 55 kW Hjdezrm I Nspfx Al Tsnr Siemens IE3 electric motor Speed: 1,450 rpm Stainless steel pump housing Complete plug-in unit with motor, coupling, and base frame Suitable for the food, beverage, dairy, pharmaceutical, and chemical industries The pump is sold as is, where is, without any warranty. Delivery: EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: used, Year of construction: 2020, functionality: unexamined, GEA Hilge MAXA stainless steel centrifugal pump in excellent industrial condition. Specifications: Manufacturer: GEA Hilge Type: MAXA 200-400 CNY 200/200/55/4 Year of manufacture: 2020 Capacity: 280 m³/h Head: 20 m Pump power: 55 kW Siemens IE3 electric motor Speed: 1,450 rpm Hnjdozrm H Eepfx Al Ter Stainless steel pump housing Complete with motor, coupling, and base frame Ready for installation The pump is sold as is, where is, without any warranty. Delivery terms: EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: used, Year of construction: 2016, total length: 3,590 mm, lifting height: 285 mm, fork length: 2,200 mm, load capacity: 20,000 kg, Gabel L: 2200mm B: 500mm H: 120mm. IK-IK 350mm, AK-AK 1355mm Hodpfsxrvvvjx Al Tjnr

Condition: used, Year of construction: 2009, load capacity: 20,000 kg, Crane Galizia F 200 Drive Diesel Year built 2009 Lifting weight (kg) 20,000 Hsdpfxjzupwfs Al Tsnr

Year of construction: 2026, condition: new, functionality: fully functional, travel distance X-axis: 3,010 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 260 mm, overall weight: 2,300 kg, feed rate X-axis: 55 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 12, swivel angle A-axis (max.): 180 °, number of axes: 4, ACROLOC SBZ 200 | 4-axis CNC profile machining center with German CAM software camQuix The ACROLOC SBZ 200 is a powerful CNC profile machining center for the professional and economical processing of aluminum profiles. The machine was designed for industrial use and combines high processing speed, precision, and flexibility with modern and user-friendly programming. A particular highlight is the German CAM software camQuix from camProx. It was specifically developed for the processing of aluminum profiles and offers clear 3D programming with DXF import, parametric machining, automatic tool assignment, intelligent clamping management, and collision detection. This allows machining operations to be conveniently prepared, visualized, and checked for potential collisions even before production. This reduces setup times and increases process reliability. Technical highlights: 4 interpolated CNC axes Spindle swivel range from -90° to +90° High-performance electric spindle with 5 kW Maximum speed 24,000 rpm Tool interface HSK F50 Automatic tool changer with 12 tool positions Additional position for a larger tool 6 automatic profile clamps Travel range X-axis 3,010 mm Travel range Y-axis 330 mm Travel range Z-axis 260 mm Speed X-axis up to 55 m/min Speed Y-axis up to 40 m/min Speed Z-axis up to 30 m/min Machine enclosure Industrial and robust machine construction Hedezugtwepfx Al Tsnr The SBZ 200 enables milling, drilling, threading, pocketing, slotting, and free-form contour machining on aluminum profiles. Thanks to the 4 interpolated axes and the pivoting spindle, profiles can be machined from different angles without having to manually realign the workpiece for each machining side. The 6 automatic profile clamps ensure secure and stable workpiece clamping. In conjunction with camQuix, clamping positions are already taken into account during programming and included in the collision detection. The ACROLOC SBZ 200 is particularly suitable for window and facade construction, doors and portal systems, mechanical engineering, vehicle construction, and for general industrial aluminum profile machining. An interesting alternative in the premium segment With 4 interpolated axes, 24,000 rpm, HSK F50 spindle, automatic tool changer, 6 automatic profile clamps, and especially the German camQuix CAM software, the ACROLOC SBZ 200 offers an interesting alternative to established profile machining centers from Elumatec, Emmegi, Pertici, and Mecal. A significant advantage is the complete package of modern machine technology, powerful German CAM software, and direct technical support from ACROLOC. Inspection and demonstration are possible by appointment. Upon request, customer-specific profiles and concrete machining tasks can also be considered during the demonstration.

Year of construction: 2002, condition: ready for operation (used), controller manufacturer: FANUC, Surface grinding machine manufactured in 2002. This Jones & Shipman Format 5-200 includes Mitutoyo PH 350 projector and features a table size of 600 x 200 mm and includes a comprehensive set of accessories, including 42 new discs of various widths and 19 diamond dressers. The machine is in very good condition, having been operated primarily by the same operator. If you are looking to get high-quality surface grinding capabilities, consider the Jones & Shipman Format 5-200 machine we have for sale. Contact us for further details. • Offered in a set with Mitutoyo PH 350, including a complete set of accessories • Outer length: 600 mm • Outer width: 200 mm • Including accessories: 42 pcs of new discs • New discs widths and quantities: 3 mm - 6 pcs, 4 mm - 1 pc, 6 mm - 11 pcs, 8 mm - 9 pcs, 10 mm - 3 pcs, 13 mm - 9 pcs, 16 mm - 2 pcs, 20 mm - 1 pc • Used discs mounted on a carrier - different roughnesses - 10 pcs • Diamond dressers: newly sharpened angle and radius - 19 pcs, suitable for repair - 7 pcs, 4 pcs on the machine • 5x disc drive • 1x balancer Hnedpszr Nciefx Al Tsr • Very good condition • Only one owner • Operated by the same operator 90% of the time

Condition: good (used), Roller conveyor, conveyor belt, roller track, saw roller conveyor -Roller conveyor: non-powered, length 3.0 m on a solid, height-adjustable base frame Hsdjzq Aaxjpfx Al Tonr -Roller width: 200 mm -Roller diameter: 50 mm -Roller spacing: 140 mm -Transport dimensions: 3000/310/H890 mm -Weight: 44 kg

Condition: ready for operation (used), CANTILEVER RACK DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM This double-sided cantilever rack is ideal for storing lightweight long goods such as pipes, profiles, battens, laths, rails, and other bulky materials in warehouses, workshops, or craft businesses. With an overall height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides clearly arranged and easily accessible storage spaces on both sides. Thanks to 6 storage levels including the base, it offers ample storage capacity while saving valuable floor space. Each cantilever arm is loadable up to 200 kg. The robust construction ensures reliable performance in daily operations. FREE DELIVERY WITHIN GERMANY IS INCLUDED. PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Total height: approx. 2,000 mm - Usable depth per arm: approx. 500 mm - Usable depth of base level: 525 mm - Total depth: 1,150 mm - Center distance (upright spacing): approx. 1,250 mm - Maximum load per arm: 200 kg (with evenly distributed load) - Maximum load per upright: 1,000 kg (with evenly distributed load) - Storage levels per side: base + 5 - Design: double-sided, arms & anti-roll-off devices welded in place - Colour: RAL 7016 (anthracite grey) - Connectors & bracings: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base section made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm long, RR 50x30x2 mm - Incl. all braces and required bolts - Incl. heavy-duty anchors Price: Hnjdpfoztzacsx Al Tor 1229.00 € net incl. delivery 1462.51 € gross incl. delivery You will receive an invoice with VAT shown separately. Delivery included: Nationwide free delivery within Germany, excluding islands. Fast processing and prompt shipping upon receipt of order. INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. We are available by phone from Monday to Friday, 08:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head -Type: UER 200-1-12 Hnodozqyw Ispfx Al Tjr -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 200 x 62 mm -Weight: 8.7 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter Hnedpfxszqyr So Al Tjr -Manufacturer: Sandvik Coromant, face milling cutter -Type: R 265.2-200M -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 205 x 62 mm -Weight: 8.6 kg

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm Hjdpfx Ajwp Eblsl Tenr sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Year of construction: 2008, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Full enclosure Measuring probe for complete measurement of the tools Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A Loader for up to 6 eroding disk sets (tool changer) Alphanumeric keyboard Standard programs for measuring, eroding Cooling and cleaning device for dielectric Automatic fire extinguishing device Extraction N183 1 exchange element 1 flushing set 1 measuring mandrel 1 mounting flange for rotating electrodes X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Hodpfx Aljzdinko Tjnr Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1