Electric motor

Silnik elektryczny 200 kW ROTOR nl 315L

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Dodpfxjwlp Hdj Aqvecp Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: refurbished (used), RA250D oxygen version, oil-free, assembled and filled with Fomblin. Completely overhauled, 0.5 mbar, 250 m³/h, available from stock. Dcodpfx Aqsd R Trnovjp We currently have several oxygen vacuum pumps in stock.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Beschrijving Deze Japanse DMG MORI ecoMill 600V hebben wij werkend uit productie overgenomen en is in frisse staat. De CMX 600V (ecoMill 600V) is voorzien van een C-frame constructie (klassieke opbouw) en beweegbare tafel (x-as) wat bedoeld is voor algemeen/all-round freeswerk. Aanvullende opties & accessoires: Siemens 840D SlimLine incl. 3D-simulatie. PROGRESSLine (weergave van de resterende productietijd en het aantal stuks van een volledig bewerkingsproces). Spanentransporteur Spoelpistool Voorbereiding voor interne cooling. Originele documentatie Dedpfsy Dg Euox Aqvecp Gewicht & afmetingen: 400x500x300 cm +/- 5.000 kg

Condition: excellent (used), functionality: fully functional, operating hours: 6,223 h, CASE CX290B Crawler Excavator Kawasaki Hydraulics, Isuzu Engine Technical specifications: - Engine: Isuzu AH-6HK1X (6-cylinder, turbocharged, common rail) - Engine power: approx. 154 kW (209 HP) at 1800 rpm - Operating weight: approx. 29,100 kg - 30,000 kg (depending on equipment) - Hydraulic system: Variable displacement piston pumps (Kawasaki) ensuring smooth combined movements - Maximum digging reach: approx. 10.5 - 10.7 m - Maximum digging depth: approx. 7.1 m - Bucket capacity: standard approx. 1.2 - 1.6 m³ - Hours: Original 6,223 operating hours – well-maintained machine, regularly serviced, hour meter fully functional and legible Dcodpfx Asygy Aweqvop Advantages of the CX290B model: - Hydraulic quick coupler: Fast and efficient attachment change without leaving the cab - Full hydraulic circuit: Equipped with additional lines on the boom for hammer, shear, or grapple operation - Cab comfort: Spacious cab with excellent visibility and air conditioning - Durability: Heavy Duty undercarriage designed for tough working conditions - Electronics: Control system offering multiple operating modes (H, S, E) for optimized fuel consumption Condition: Machine as shown in photos; tracks and undercarriage in good condition. Ready for testing on site.

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Dedsu Ttf Njpfx Aqvscp Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Djdpfxozkbr To Aqvecp Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: refurbished (used), 60 m³ / 60,000 l fire water tank according to DIN 14230 Djdpfx Aqshh Sruovocp Tank volume: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight: approx. 9,500 kg Material: Steel, material S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked or driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, seal and screws. New or used, immediately available! The container has been emptied, cleaned, overhauled and tested for tightness by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in form B without a level gauge - Ventilation flange stub in DN 100 with cap with a total length of approx. 1,300 mm, suitable for 800 mm ground cover and 500 mm above ground - Externally coated with a bitumen coating for protection - Upon request, we can coat the tank with an internal full coating based on bitumen or an epoxy resin internal coating (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery location, and you will immediately receive the exact freight costs. An inspection is possible at any time by prior appointment. If you require any further information, please call us or send us an email to b.barth(at)barth-tank.de We can also accept and purchase tanks/containers of all kinds, simply contact us. We also have these types of tanks constantly in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,650 kg, spindle mount: MK 6, L&Z Lathe Weiler Commodor B The machine has been cleaned and inspected by us. It runs smoothly; measured runout is < 0.01 mm. Upon request, a coolant system and tool guard with a microswitch can be retrofitted. For sale only to businesses as defined in § 14 BGB. Technical data: Year of manufacture: 1987 Turning length: 1000 mm Turning diameter over bed: 380 mm Turning diameter over cross slide: 190 mm Spindle speed: 25 - 2000 rpm Spindle bore: Ø 56.0 mm / MK6 Tailstock quill: MK 4 Quill stroke: 150 mm Bed width: 310 mm Spindle mounting: DIN 55027 Size 6 Dedpfxoz A Ah Re Aqvjcp Feeds - longitudinal: 0.022 - 0.8 mm/rev Feeds - transverse: 0.011 - 0.4 mm/rev Threads: M 0.3 - 10.0 mm Operating voltage: 380 V Total power consumption: 4 kW Weight approx. 1650 kg Accessories: • 3-axis digital display • Multifix quick-change tool holder B • 3-jaw chuck Forkardt 200 • 4-jaw chuck Röhm • Operating manual • Chip tray with integrated coolant pump for connecting a coolant system • Various accessories (set of soft jaws, turning tools, etc.)

Condition: reconditioned (used), Aerzen, Robuschi, Spomasz Blower Stages GM 3 GM 4 Dcsdpfx Asxyz S Eoqvop GM 7 GM 10 GM 15 GM 25 GM 30 GM 35 GM 50 GM 60 GM 80 GM 150 RBS 15 RBS 25 RBS 35 RBS 45 RBS 46 RBS 55 RBS 65 RBS 75 RBS 85 RBS 95 RBS 105 RBS 115 RBS 125 RBS 135 RBS 145

Condition: as good as new (ex-display), Year of construction: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, for underground storage of heating oil and diesel fuel, 1 dome (2 domes also possible as an alternative). Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg In addition, we can equip our tanks with the following accessories: Dcjdji Enxdepfx Aqvsp - Leakage monitoring with under- and overpressure leak detectors - Dome shaft with shaft cover in a walkable or drive-over design - Partition walls (as a multi-chamber tank) - Internal coatings (e.g., 2K epoxy resin), partial or full linings - Content and level measuring devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Fuel dispensers for diesel, biodiesel and gasoline – with complete tank data recording on request - External tank insulation with PU foam The tank is cleaned internally, and the external coating has been fully refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters