Used Hpr 260 Xd for sale (3,013)

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: PL260-091, type of input current: three-phase, input voltage: 380 V, total width: 4,500 mm, total length: 7,500 mm, total height: 1,500 mm, type of cooling: water, overall weight: 9,100 kg, cutting current: 260 A, sheet thickness steel (max.): 38 mm, open-circuit voltage: 380 V, working range: 60 mm, table length: 6,000 mm, table width: 3,000 mm, working width: 3,000 mm, For sale: AKYAPAK HPR 260 industrial CNC machine for thermal cutting of sheet material, manufactured in 2013. The machine is of the gantry type, with a working area of 3000 × 6000 mm, suitable for cutting large-format steel sheets. It is equipped with a Hypertherm HPR260 / HPR260XD plasma system, Hypertherm MicroEDGE Pro / Edge Pro CNC control interface, as well as equipment for oxy-fuel cutting. The machine is suitable for the production of metal structures, plates, flanges, blanks, sheet steel parts, and for heavy industrial applications. Key technical specifications: Parameter Data Manufacturer AKYAPAK Model HPR 260 Machine type CNC plasma and oxy-fuel cutting machine Year of manufacture 2013 Machine serial number PL260-091 Working area 3000 × 6000 mm CNC control Hypertherm MicroEDGE Pro / Edge Pro Operating system Windows XP Plasma source Hypertherm HPR260 / HPR260XD Plasma serial number 260XD-004364 Plasma output current 260 A Duty cycle 100% Machine nameplate power 60 kW Power supply 380 V / 50 Hz Weight 9010 kg Origin Turkey CE marking Yes Equipment and features Tjdjzibqaopfx Ac Tob The machine includes: CNC gantry structure; working table 3000 × 6000 mm; Hypertherm HPR260 / HPR260XD plasma system; Hypertherm MicroEDGE Pro / Edge Pro CNC control; Hypertherm gas console; gas regulators; plasma cutting torch; oxy-fuel cutting head; torch height control; slotted table with slats; fume extraction / aspiration system through the table; operator console with joystick, Start/Stop, emergency stop, and manual modes. Cutting capacity The Hypertherm HPR260 plasma system is a 260 A industrial system for high-quality plasma cutting. Approximate capacity for mild steel: production piercing: approximately 32–38 mm, depending on the material, gases, and settings; maximum cutting from edge: up to approximately 60–64 mm; oxy-fuel cutting allows for working with thicker steel sheets, depending on the settings, nozzles, and gas equipment.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 350 h, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis Hypertherm HPR130XD plasma cutting machine was manufactured in 2013. It features a power output of 130A with a 100% duty cycle, and operates at a voltage input of 400V. The included TEKA air extraction unit has a volumetric flow rate of 7500 m³/h and a motor power of 7.5 kW. If you are looking to get high-quality plasma cutting capabilities, consider the Hypertherm HPR130XD machine we have for sale. Contact us for further details. - Plasma System Power Output: 5A/82V - 130A/132V (100% Duty Cycle at 130A, 150V)- Plasma System Voltage Input (U1): 400V, 3-Phase, 50/60 Hz- Plasma System Input Current (I1max): 32A- Plasma System Power Rating (S1): 22kVA- Plasma System Open Circuit Voltage (U0): 311V- Air Extraction Unit Model: Filtercube 4H- Air Extraction Year of Manufacture: 04/2013- Air Extraction Volumetric Flow Rate: 7500 m³/h- Air Extraction Max Static Pressure: 3950 Pa- Air Extraction Motor Power: 7.5 kW- Air Extraction Nominal Current: 15.5 A- Air Extraction Supply Voltage: 400V (3PH+N+PE), 50Hz- Air Extraction Control Voltage: 230V- Air Extraction Mass/Weight: 380 kg- Air Extraction Protection Class: IP54- Control / Electrical Cabinet Drives: ECOVARIO / KOCH components (Y1-Drive, X-Drive, XX-Drive, Z-Drive) Todpfx Aszvxq Rjc Tob Additional Equipment: Gas bottle setup with regulators, status indicator light tower

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 Tjdpfxewhk E He Ac Tob MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: Tedpfezxg Iisx Ac Tob - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: ready for operation (used), A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible. Todpfxjvamq Dj Ac Tsb

Condition: good (used), Year of construction: 2016, functionality: fully functional, Currently, a machine overhaul is being carried out with a value of €90,000. Maho DMF 260 -7 / 5-axis machining center Year of manufacture 2016, Control system: Heidenhain ITNC 530, Travel range X/Y/Z: 2600/700/700 mm, Fixed table with integrated NC rotary table, B-axis in the milling head, infinitely adjustable, Spindle speed up to 14,000 rpm, Tool holder: HSK A63, Coolant: 60 bar, Coolant pressure: 40 bar, Paper band filter, 3D measuring probe Heidenhain TS 649, 3D Quickset, Machine protection control, Electric handwheel, Tjdpfx Aozxfz Iec Teb 3D data model.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, New machine warranty, in-stock item, original packaging, available for immediate delivery. Equipped with a safety system for solvent-based substances according to DIN 1539. Matching loading carts in stock (see photo). Contact us! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters Todpfx Acol Dw T As Tsb - Max temperature: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for data logging via USB stick - Air circulation: 3600 m³/h - Exhaust air flow: 390 m³/h - Additional features: drive-in rails - Connected load: 39 kW - Net weight: 1150 kg - Including documentation, CE declaration Installation and commissioning available upon request. Inspection at our warehouse possible by appointment. We offer new and used industrial ovens. Contact us! Keywords: Oven, Ovens, Drying oven, Firing kiln, Heat oven, Heating cabinet, Industrial oven, Convection oven, Convection chamber dryer, Tempering oven, Preheating oven, Temperature oven, Drying cabinet, Chamber kiln, Curing oven, Forced-air drying cabinet, Forced-air oven, Solvent oven, Chamber dryer, Paint dryer.

Condition: excellent (used), Year of construction: 2019, Horizontal, semi-automatic bandsaw machine in a robust design, intended for professional use. The machine is equipped with a coolant system as standard; its design separates coarse dirt from the required coolant. The saw frame can be easily pivoted, allowing for bevel cuts on both sides, up to 60° to the right and up to 45° to the left. The pivoting saw frame is secured using a clamping lever. Semi-automatic operation: At the touch of a button, the complete cutting cycle is performed – tensioning the material, starting the saw blade and the cooling system, carrying out the cutting process, stopping the saw blade and the cooling system, returning the saw frame to the adjustable starting position, and opening the clamping device, resulting in comfortable and efficient operation. Operation in manual mode is also possible. The clamping pressure can be adjusted via the hydraulic unit. * The table rotates with the pivoting action, preventing cutting into the table. * Precise carbide guides for accurate cuts. * Display for saw blade tension. * Saw blade speed is frequency-controlled, ranging from 15-90 m/min. * Saw blade dimensions: 2880 x 27 x 0.9 mm Tjdpfx Aszwv Ntsc Tjb * Optional laser line and micro-spray system. The saw blade can be changed easily and quickly, which simplifies the use of the appropriate saw blade and also protects the machine and the saw blade.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 06202305, functionality: fully functional, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine - Die-cutting units - Reel to sheet - Fanfold - Magnetic stripes Tsdpew Ec U Iefx Ac Tob - Air shock web width 360 mm

Condition: like new (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, total height: 3,300 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 28,000 kg, number of slots in tool magazine: 60, Equipment: chip conveyor, 5-axis machining centre DMG DMF 260-11 Year of manuf. 2012 Control Heidenhain iTNC 530 Speed [rpm] 10000 Movement X/Y/Z [mm] 2600/1100/900 Todpfx Aezucm Hec Teb Tool holder SK50 Spindle Speed 10.000 U/min Power 44 kW Torque 288 Nm Taper SK 50 Media feed-through Blast air, Coolant 4. NC-Axis Technologie NC-Swicel head Stroke +/- 100° Clamping Hydraulic 5.NC-Axis Technolgie NC-Round table Stroke 360° Diamenter 1.050 mm Clamping Hydraulic Load capaity 1.200 kg Tool magazin 60 stations Rapid travers 40 m/min Chip managment Chip conveyor Coolant mangament Coolant through spindle, 80 bar Positioning sensor Direct scale in all Axis Workpiece measurment Touch probe, Heidenhein TS 649 Oil mist seperator: Media feed-through spindle Blast air, Coolant Process observation Operation mode 4

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 260 mm, Equipment: CE marking, HESKA HES 260 metal band saw – robust band saw for metalworking For sale is a used HESKA HES 260 metal band saw. The machine is ideally suited for cutting steel, stainless steel, aluminum, and other metal profiles, tubes, and solid materials. The HESKA HES 260 is characterized by its solid construction, reliable technology, and versatile applications. Thanks to its horizontal design, it is ideal for workshops, blacksmith shops, metal fabrication companies, and general mechanical engineering. Technical data: Manufacturer: HESKA Model: HES 260 Machine number: 23244 11 Machine type: Horizontal metal band saw Cutting range round/square at 90°: 260 mm, at 45° 160 mm Miter: right/left Band speed: 15-90 m/min Todszwlhfjpfx Ac Tsb Saw band: approx. 3,660 × 27 × 0.9 mm Coolant system: available Drive: approx. 0.6/0.8 kW Operating voltage: 400 V Dimensions: approx. 2000 x 1000 x 1200 mm (L x W x H) Weight: approx. 650 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, edge thickness (max.): 25 mm, height adjustment type: pneumatic, actuation type: electric, total height: 1,950 mm, total length: 8,000 mm, total width: 1,300 mm, overall weight: 7,500 kg, This high-performance SCM Stefani Solution XD is engineered for high-volume multi-shift industrial manufacturing, delivering continuous accuracy and a flawless edge finish even on the most sensitive high-gloss or thin-film materials. Equipped with a solid monolithic structure and advanced NC electronic touch controls, this specific 4-cabinet configuration maximizes stability and houses a comprehensive setup of high-end processing aggregates. Tsdpfxozcccrs Ac Tjb Manufacturer: SCM Group (Italy) Model: Stefani Solution XD Configuration: Right-Hand Feeding Condition: Excellent, Fully Operational Location: Plovdiv, Bulgaria Availability: Immediate Estimated Footprint & Shipping Dimensions Total Machine Length: Approx 8,000 mm Total Transport Length: Approx. 8,300 mm (including extended infeed guides) Machine Width: Approx. 1,300 mm (transport width with side panel supports retracted) Machine Height: Approx. 1,950 mm (with safety hoods closed) Estimated Operating Weight: 7,500 kg Technical Specifications Feed Speed: Up to 25 – 30 m/min (NC-controlled variable track speed) Panel Thickness Capacity: 8 mm to 60 mm Edgeband Thickness Capacity: 0.3 mm to 22 mm Max Coiled Edge Capacity: 3 mm Actuation Type: Pneumatic & Multi-Axis Electronic Servo Motors Height Adjustment: NC-Motorized Automatic Top Belt Pressure Beam Pneumatic Requirement: 6 bar Control System Software: Maestro Pro-Edge / Active Edge Interface Premium Installed Working Units (Aggregates) This machine features a robust multi-station arrangement with a multi-hose high-efficiency central dust extraction layout: Pre-Milling Unit: High-capacity dual cutter block layout utilizing Hydro-Lock tool connections to guarantee zero vibration during panel edge squaring. Advanced Gluing Station (VC-600): Plasma-treated glue pot capable of rapid EVA and PUR hot-melt changes, backed by rapid pre-melting technology. End-Trimming & Fine Trimming Units: Rigid, low-inertia dynamic structures built to ensure zero scoring on fragile surfaces. Round 4 Corner-Rounding Unit: Multi-axis 4-motor high-speed profile rounding unit processing at up to 30 m/min. Finishing Stations: Multi-edge profiling scrapers, glue scrapers, and motorized buffing units for an out-of-the-box clean edge. Automated Axis Positioning: Complete machine changeovers happen in minutes directly from the touchscreen console, maximizing uptime. Top Track Pressure Belt System: Secures fragile components far better than traditional small-wheel setups to keep protective films pristine. Energy Management Built-In: Programmed with the SAVENERGY system to reduce plant power consumption during cycle idle times.

Condition: excellent (used), Year of construction: 2010, operating hours: 20,656 h, functionality: fully functional, machine/vehicle number: 174620, clamping force: 260 kN, The machine comes from toolmaking and was only used for sampling. This is why it has low operating hours and is in very good condition. Please check the documents; the order confirmation is included there. Tedpoxfgfzsfx Ac Tsb

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 20-19/2010, total length: 5,000 mm, total width: 2,800 mm, total height: 1,200 mm, input voltage: 400 V, Equipment: CE marking, Horizontal washing machine (standalone unit, positioned before the Benteler edger) Width: 2600 mm 1 pre-wash zone – spray zone 1 main wash zone with 4 brushes including 1 m inlet/outlet Tedpszqtk Ijfx Ac Tob

Condition: used, Year of construction: 2010, We are offering this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original spare controllers for this year of manufacture are often no longer available, this upgrade offers long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Tjdpfx Aozwpfhjc Tob Condition & equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables cuts up to 50% faster compared to standard systems. Scope of delivery: • Waterjet system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal including software • Technical acceptance protocol / service report from 01/2026 Location & inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from 15.09.2026. Sales & legal notes: The sale is exclusively in the B2B sector (commercial sale) with exclusion of any liability for defects, guarantee and warranty ("sold as is"). A return, exchange and further negotiations are excluded. All information, data and descriptions are provided to the best of our knowledge, but without guarantee of completeness, accuracy and topicality. The buyer is obliged to inspect the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are carried out entirely by and at the expense of the buyer. If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2010, operating hours: 26,827 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed length X-axis: 2,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Siemens, controller model: 840 D SL Operate, workpiece weight (max.): 6 kg, total height: 2,800 mm, total length: 7,000 mm, total width: 5,000 mm, table width: 700 mm, table length: 2,900 mm, table load: 2,150 kg, rotational speed (max.): 8,000 rpm, overall weight: 14,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 8,280 h, spindle motor power: 23,500 W, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, We are offering this used Deckel Maho DMF 260 / 700 vertical machining center, year of manufacture 2010. X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm Tjdpfx Acsytruxj Tob CNC control: Siemens 840 D SL Operate Main spindle: Spindle speed range: 8,000 rpm Main spindle drive power: 23.5 kW Tool holder: SK 40 Worktable: Clamping surface: 2,900 x 700 mm Max. table load: 2,150 kg Tool magazine: Number of tool pockets: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Feed rates: Rapid traverse (X / Y / Z): 40 m/min Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 42 kVA Machine weight approx.: 14.5 t Space requirements approx.: 7.0 x 5.0 x 2.8 m Chip conveyor Coolant system High-pressure cooling Internal coolant supply Paper band filter 2x rotary windows Tool magazine, 30 positions Probe Operation mode 4 Prepared for a 4th axis At approx. 7,500 spindle hours, the X-axis and tool changer were overhauled. If you have any questions or require further information, feel free to send us a message or give us a call. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in the technical data and specifications, and subject to prior sale!

Condition: used, Year of construction: 2015, functionality: fully functional, Heavy-duty pallet decoiler with integrated precision straightening head, designed to feed coiled strip material into stamping lines and other downstream processing. The large 1500 mm rotating table handles full pallet-mounted coils up to 3000 kg, while the 9-roll straightener (5 lower driven + 4 upper) ensures a flat, stress-relieved strip ready for production. Both turntable and straightener are independently driven via frequency inverters, allowing precise speed and tension control. Ideal for stamping operations where coil material is delivered on pallets rather than mandrels — eliminating the need for separate coil cars and reducing changeover time. Technical Specifications Table diameter 1500 mm Table load capacity 3000 kg Max. table rotation speed 10 rpm Tedozav Ngopfx Ac Teb Strip speed 10 m/min (at core Ø 300 mm) Stamping direction Left to right Winding direction CW or CCW (selectable) Max. strip thickness 1.5 mm Max. strip width 220 mm Turntable drive motor 2.2 kW, inverter-controlled Turntable bearing Four-point bearing Straightener head 9 rolls (5 lower + 4 upper) Roll diameter 40 mm Lower rolls All driven Straightener drive motor 0.75 kW, inverter-controlled Electrical connection 3×400V + N + PE, 50 Hz, 16 A Dimensions (L × W × H) 2250 × 1500 × 1700 mm Weight ~750 kg Paint finish RAL 7035 light grey, structured

Condition: excellent (used), Year of construction: 2021, Engel Victory 2460/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Injection Molding Machine / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2021 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1,100 g Injection pressure: 2,000 bar Dosing volume: 1,212 cc Clamping unit: Clamping force: 260 t Tie bar distance: 0x0 mm Platen size: 1,100 x 1,000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 – Touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in perfect technical condition Tie-barless hybrid machine: energy-efficient and very quiet Operating hours: approx. 10,000 in automatic mode Air valves x 5 Hydraulic core pull x 2 on the moving platen side Hydraulic core pull x 2 on the fixed platen side Tjdszc N Alopfx Ac Tob Injection unit is wear-resistant and corrosion-resistant Main drive of the machine: servo motor with inverter – energy saving Proportional valve on the injection unit – precise injection Kistler sensor – mold pressure control Engel Viper 20 Robot Year of manufacture: 2021 6-axis robot: all 6 axes driven by electric servo motors: X, Y, Z, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 7.35 x 2.06 x 2.37 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2020, power: 1.4 kW (1.90 HP), control type: NC control, total height: 2,000 mm, total length: 1,900 mm, total width: 1,800 mm, Band saw Todpfx Acjzc Il Es Tob PILOUS - ARG 260 Plus Bandsaw mitre cutting left & right Ø 260 MACH-ID 6223 Make: PILOUS Type: ARG 260 Plus Year: 2020 Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr) Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.) Capacity 90°: 260° Cutting flat 90°: 300 x 200mm Capacity L 45°: 175° Capacity R 45°: 200° Cutting speed Vario:35 + 70 Circle blade size: 2880 x 27 x 0,9mm Power: 1,4kW Length: 1900mm Width: 1800mm Height: 2000mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 33234, Year of construction: 2013, Stratasys Objet 260 Connex – Professional 3D Printer For sale: Stratasys Objet 260 Connex 3D printer, year of manufacture 2013. The machine comes from a professional environment and is suitable for applications such as prototyping and product development. Todpfx Acoyag Ime Teb Optional accessories are negotiable. Further information available upon request.

Condition: like new (used), Year of construction: 2016, 1 used vertical machining center Manufacturer: EMCO Type: Concept Mill 260 Year of manufacture: 2016 Spindle operating hours: approx. 1000, from a vocational training center Travel range in X/Y/Z: 350/250/300 mm Distance from spindle nose to table: 120 - 420 mm Rapid traverse rate X/Y/Z: 24 m/min Tedpfx Aezq R Iqec Tob Working feed rate X/Y/Z: 0-10 m/min Max. feed force in X/Y/Z: 3000 N Clamping area: 520 x 300 mm Max. table load: 100 kg Number of tool positions: 20 Max. tool diameter: 80 mm Max. speed: 10000 rpm Max. torque: 34 Nm Dimensions (L x W x H): 1600 x 1700 x 2200 mm Machine weight: 1970 kg

Year of construction: 2023, operating hours: 16 h, condition: like new (used), functionality: fully functional, GCV Glass Picasso V2 260 glass painting machine, year of manufacture 2023, condition - as new. AUTOMATIC PAINTING MACHINE GCV Picasso-V2 260 Max. Glass Width (mm): 2600mm Max. Glass Length (mm): unlimited Max. Glass Weight (kg): 600 kg Min. Glass Size * Width * Length (mm): W 220mm * D 900mm (single panel size) ADDITIONAL PRODUCTION EQUIPMENT 1 pc. transport table, equipped with wheels Todpfxozhagke Ac Teb 1 pc. large stand for drying and storage portable sample boards with color palettes Mixer with pigment stand, Number of containers: 24, Container volume: 2.3 l

Condition: used, Year of construction: 2022, x-travel 2.600 mm y-travel 1.100 mm z-travel 900 mm control 840 D sl Celos Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 kW max. Torque 120 Nm tool taper SK 40 DIN 69871 swivellable B: +/- 100 ° table surface area 3.200 x 1.100 mm max. table load 4.000 kg max. workpiece height 972 mm rotary table dia. 1.050 mm C-Axis 360 ° max. workpiece weight 1.200 kg number of toolpositions 120 pos. tool taper SK 40 DIN 69871 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg Tedpfezqvmxox Ac Teb rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power XYZ: 12 / 10 / 12 kN total power requirement 68 kVA weight of the machine ca. 28 t dimensions of the machine ca. 9,0 x 6,0 x 3,3 m 5 Axis CNC - Travel Column Milling Machine DMG-MORI - DMF 260 11 - Swivel-Millinghead (B-Axis) - NC rotary table (C-axis) - only approx. 4,930 spindle hours - only approx. 15,000 power-on hours - WITHOUT clamping devices, WITHOUT tools

Condition: good (used), functionality: fully functional, 1 x Mechanic’s lathe Weiler RDU 260-80 Machine with complete accessory package, in good condition. Technical data: - Spindle bore: 38 mm - Spindle speeds: 125 - 2800 (left/right) - Center height: 130 mm - Distance between centers: 350 mm Equipment: - Crank cross slide with Multifix A quick-change system - Crank tailstock MK 2 - Hand lever cross slide - Hand lever tailstock with draw-in collets - Parting tool slide - 6-position turret - Collet chuck with draw-in collets - Coolant system Accessories: 65 x draw-in collets 358 E C - 5 1 x draw-in collet in tailstock 366 E (MK 2) 1 x quick-change tool holder Multifix A with 1 cassette 1 x 3-jaw chuck Röhm 140 mm Further accessories, such as collets for the tailstock or tools for the tailstock/turret, are available at an extra cost. Todpfx Ajzczbyoc Tsb The machine can be inspected while powered.

Condition: used, Year of construction: 2012, Bandsaw cutting machine KASTO PSB 260 AU, year of manufacture 1986, general overhaul in 2012, max. width 225 mm, max. diameter 225 mm. Tjdpozlpulofx Ac Tjb