Used Hh Fuse for sale (1,353)

Year of construction: 2025, operating hours: 255 h, condition: like new (used), functionality: fully functional, We are offering for sale a large-format, 5-axis CNC waterjet cutting machine, PTV WJ4080. The machine was manufactured in 2025, has only approximately 255 operating hours, and is in new condition (like new/demonstration machine). Regular service and maintenance have been performed exclusively by authorized technicians from the manufacturer, PTV. The machine is equipped with superior optional features for maximum precision (5-axis cutting head with bevel compensation) and gentle cutting of brittle materials. The machine is connected and ready for a demonstration. Technical specifications: • Manufacturer: PTV s.r.o. (Czech Republic) Iedozg Dgxjpfx Achjtk • Model: WJ4080-1Z-UJ-PJ-5AX (60°) • Year of manufacture: 2025 • Serial number: 70-1457 • Machine condition: Like new (as new, minimally used) • Operating hours: approx. 255 hours • Working dimensions: 4,000 x 8,000 mm x +-180 mm • Enclosure protection class: IP54 • Electrical parameters and connection: • Voltage system: TN-C-S, 3+N+PE-400/230 V AC • Network frequency: 50 Hz • Infeed fuse: 25 A • Installed power: 5.5 kW • Power factor COS φ: 0.85 • Control circuit voltage: 24 V DC • Maximum short-circuit current of busbars: 10 kA Key features and technologies: • 5-axis cutting head (60°) with Progress Jet function: A system for active bevel elimination, which ensures a perfectly perpendicular cut and maximum dimensional accuracy, even at high speeds. • Gentle Piercing function: Controlled piercing with a smooth increase in cutting pressure. Ideal for brittle materials (glass, tiles, ceramics, stone, composites), where it completely prevents cracking or delamination of the material. • PTV JETS 3.8/60 Classic high-pressure pump: - Equipped with a frequency converter (dampens shocks, saves electrical energy, and extends the life of high-pressure components). - Integrated auxiliary pump for compensating low pressure in the supply water. • ARSA automatic sludge removal: Continuous mechanical cleaning of the tank/collector from used abrasive + integrated vacuum tube for easy manual cleaning. • Abrasive handling system: Pressurized abrasive feed unit PDA 1500. Bonus to the offer: We will provide 4 tons of high-quality abrasive free of charge with the machine, which allows the new owner to immediately start production without additional initial investment. The machine is fully functional, connected, and can be viewed and tested by prior arrangement. If you have any questions, need further information, or are interested in viewing the machine, please do not hesitate to send us a message or contact us by phone. We will get back to you promptly.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Longitudinal seam, folding base, double edge, 4 + 6-point gluing, electronic top gluing system HHS X-tend² with 6 applicator heads, lower gluing system on the left side, mechanical overlap folding with timed/chain alignment, vibrator with compressed air at the feeder, toothed gauge at the feeder, additional center transport in the pre-breaker, pre-breakers on the right and left, kicker, counter, additional center transport in the folding section, Dünki silicone tape dispenser, pneumatic, timed press belt. Itedpjztq Ezsfx Achek The machine is in very good condition and can be inspected (disassembled). Max. 1100 mm, min. 126 mm.

Condition: used, Year of construction: 2016, total width: 900 mm, total length: 1,200 mm, total height: 1,600 mm, Colour: Grey Weight: 300 kg - Year: 2016 Iedpfx Acsym Um Dohjtk - Documentation available: No - CE certificate present: No - Serial number: 7/26 - Max. cutting height [mm]: 110 - Max. cutting width at 90° [mm]: 290 - Voltage [V]: 400 - Current consumption [A]: 6.5 - Fuse [A]: 16 - Transport dimensions: 1200mm x 900mm x 1600mm (l x w x h) - Transport weight [kg]: 300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Itjdpsza U Nfefx Achjk Bending Length 4250 mm

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade fixtures, jigs, tools, and end-use parts. Designed for production environments, it prints parts that are stronger than machined aluminum, at a fraction of the cost. It combines superior surface quality, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with the adaptive manufacturing technology Blacksmith, which is only available on the X7. Technical specifications: Printer features Process: Fused Filament Fabrication, Continuous Fiber Reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm accuracy Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100–240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Itedpfx Aszh Dqmochsk Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, Carbon fiber FR, Fiberglass, Aramid fiber (Kevlar®), HSHT Fiberglass Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Infill: closed-cell infill: several geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available at extra cost) Security: 2-factor authentication, org-admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 Sale from current location Condition: used Scope of supply: (See pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 partially used rolls of Onyx filament (Subject to change and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: INDEX Type: MS40-6 C Year of construction: 2019 Control: Index control C200-SL, MS40C Double-NCU Technical data: Working spindles: Number: 6 pcs. Spindle bore: max. 40 mm Max. speed: 7,000 rpm Power (100% / 25%): 13 / 24 kW Torque (100% / 25%): 31 / 57 Nm Synchronous spindle: Number: 1 pc. Spindle bore: 40 mm Max. speed: 8,000 rpm Power (100% / 25%): 10 / 14 kW Torque (100% / 25%): 16 / 22 Nm Slide travel z: 150 mm Number of tools for back-end machining: 3 pcs. Swiveling range b: 144 ° Tool holder: Number: 12 pcs. Slide travel x: 73 mm Slide travel z: 120 mm Tool holder, cut-off and back-boring slide: Number: 1 pc. Itjdpfxozlutms Achok Slide travel x: 82 mm Number of tools for back-end machining: 3 pcs. Electrical connection data: Rated power: 85 kW Connection power: 101 kVA Rated current: 145 A Max. pre-fuse: 160 A Note: Mains voltage: 400V Note: Electrical frequency 50 Hz Technical features & accessories: - Double-NCU - Signal light 'Smartlight' with LED - Machine designed for connection to a TN network. - Coolant: Cutting oil - NC option Synchronous spindle / Multi-sided turning incl. electronic shaft - INDEX loading magazine MBL40-6/3300/Strip loader/50Hz: - Strip loader 50Hz - for bar diameter D13 - D40 - Bar length 3300 mm - with pilot drilling unit - Material storage with 700 mm support area - Profibus-DP-Master interface. - 1 set (6 pieces) reducing sleeves manufactured for bar or corner dimensions, diameter D = * mm, Inner diameter range D14 - D41 - 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of: - 6 material sliders D23 - 6 rotating sleeves D23 - 1 set (6 pieces) internal clamping sleeves D23mm - for material diameter D24mm - D32mm - pilot drilling diameter D15mm - 1 set (6 pieces) external stops D23mm - for material diameter D24mm - D32mm - pre-machined - 1 set (12 pieces) reducing sleeves for material sliders. The outer diameter of the reducing sleeves corresponds to the material diameter (D13 - D40) - 1 set (6 pieces) adapter sleeves, inner diameter range D13.5 - D40.5. The inner diameter of the adapter sleeves should be bar diameter + 0.5mm. - 1 set (6 pieces) two-part guide intermediate tubes, diameter 29 mm - Assembly aid for the sleeves of the guide intermediate tubes - UNIMAG - Interface for connecting a bar loader - Part discharge via slide into spindle position 6 - Workpiece conveyor belt in spindle position 6, machine-integrated - Hainbuch TOPlus Axfix D40 for synchronous spindle - Multi-sided and thread milling device - Reduction ratio i=5:1 - Inductive encoder for reference query - Internal oil lubrication - INDEX short taper connection - without converter - Back-end machining device on slide position 6.2 for max. three boring positions for fixed tools FURTHER INFORMATION IN THE PICTURES Accessories, tools and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: excellent (used), Year of construction: 2002, VDF BOEHRINGER NG 180-2 CNC Lathe / Turning Center Year of manufacture: 2002 Machine No.: 1130.2601-30 Country of manufacture: Germany Control: Siemens SINUMERIK 840D Drive system: Siemens SIMODRIVE 611 Technical Data Turning diameter: 290 mm Turning length / distance between centers: approx. 850–900 mm Swing diameter over bed: 600 mm Spindle bore: 80 mm Main spindle speed: 10–4,000 rpm Main spindle drive: Direct drive, suitable for CBN hard turning Spindle drive power at 40% ED: 56 kW Maximum spindle torque at 40% ED: 605 Nm Tool turret: 12 positions Number of turrets: 1 Driven/live tool capability: 12 stations Tool holders: Included / fitted as shown Main spindle chuck: 3-jaw Autoblok chuck The machine is equipped with a second spindle / counter-spindle arrangement, visible on the right-hand side of the working area, together with workpiece support/handling equipment. The photographs also show additional machining/tooling positions around the turret. Electrical Data Supply voltage: 400 V Phases: 3 AC Frequency: 50 Hz Main fuse rating: 125 A Rated current indicated on machine: 100 A Machine Dimensions and Weight Length: approx. 5,949 mm Width: approx. 2,300 mm Height: approx. 2,230 mm Machine weight: approx. 10,000 kg Machine: VDF BOEHRINGER NG 180-2 Year: 2002 Serial No.: 1130.2601-30 Control: Siemens SINUMERIK Max. turning diameter: 290 mm Turning length: approx. 850–900 mm Itsdpfxjzvfhij Achek Spindle bore: 80 mm Spindle speed: 10–4,000 rpm Spindle power: 56 kW Turret: 12 positions Dimensions: approx. 5,949 × 2,300 × 2,230 mm Weight: approx. 10,000 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 3,800 h, overall weight: 27 kg, load capacity: 7 kg, arm reach: 911 mm, controller manufacturer: FANUC, controller model: R-30iB Mate, number of axes: 6, This 6-axis FANUC LR Mate 200iD/7L auf Bosch APAS assistant i6 was manufactured in 2015. It features a mobile base unit, a FANUC System R-30iB Mate control unit, and a custom-built pneumatic gripper. With 3,800 operating hours, this collaborative robot offers versatile automation capabilities. If you are looking to get high-quality automation capabilities, consider the FANUC LR Mate 200iD/7L collaborative robot we have for sale. Contact us for further details. Itsdpfozq Af Usx Achek - Main Components: Mobile base unit Bosch APAS assistant i6 (on wheels), OpCon control panel, Robot arm FANUC LR Mate 200iD/7L, Control unit FANUC System R-30iB Mate, Teach pendant (handheld programming device)- Peripherals & Additional Modules: Pneumatic module (Festo), Pneumatic gripper (custom-built), Protective covers and mounting frame (APAS-specific)- Operating Hours: 3,800 h- Main Circuit Voltage: 1/N/PE 230V AC 50Hz- Control Circuit Voltage: 24V DC- Full Load / Short Circuit Current: 3.5A / 10kA- Min. Supply Line: 3 x 2.5 mm²- Max. Backup Fuse: 16A gG- Protection Rating: IP52- Robot Weight: 27 kg- Notes: Backup battery is dead

Condition: ready for operation (used), Year of construction: 2013, overall weight: 1,092 kg, load capacity: 90 kg, arm reach: 3,096 mm, number of axes: 6, This 6-axis KUKA KR 90 R3100 extra was manufactured in 2013. It features a load capacity of 90 kg and a range of 3096 mm, making it suitable for various applications. The machine includes a KUKA KRC4 control cabinet and a smartPAD teach pendant for enhanced usability. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 90 R3100 extra robot arm we have for sale. Contact us for further details. Isdpfx Acszty Acjhotk - Controller Model: KRC4- Year of Manufacture (Robot): 2013- Year of Manufacture (Controller): 2013- Robot Weight: 1092 kg- Controller Weight: 150 kg- Load Capacity: 90 kg- Range: 3096 mm- Supply Voltage: 3x400V- Frequency: 50/60Hz- Full-Load Current: 20A- Mains Fuse: 25A- Included Accessories / Components:- KUKA KRC4 Control Cabinet- KUKA smartPAD Teach Pendant- Base mounting plate with leveling bolts- Upper arm extension fixture / junction box assembly

Condition: used, empty load weight: 5,980 kg, maximum load weight: 26,020 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 05/2008, loading space length: 7,500 mm, loading space width: 2,340 mm, loading space height: 1,450 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2-axle, BPW axles, air suspension, ABS (anti-lock braking system), catwalk, flap, U-protection, chute Body: steel body approx. 25m³ 2x 9t BPW axles, drum brakes! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Itedpfevhm E Dex Achjk

Condition: used, empty load weight: 6,980 kg, maximum load weight: 27,020 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 05/2008, loading space length: 7,350 mm, loading space width: 2,340 mm, loading space height: 1,400 mm, loading space volume: 24 m³, suspension: air, tire size: 385/65R22.5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 3-axle, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), roller tarpaulin, catwalk, flap, U-protection Body: steel body approx. 24m³ with platform and roller tarpaulin 3x 9t BPW axles, drum brakes, 1st axle liftable! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Isdpfxsvzqias Achstk

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone. Isdpfx Acoy Exwfohjtk

Condition: used, Year of construction: 1998, machine/vehicle number: 000373, Comm. no.: Lg 34723 Double decoiler LORENZ HH 2000.2 Used, in good condition Iedpfxjnbdyaj Achjtk year of construction 1998 - machine no. 000373 with - hydraulic spreading and automatic retensioning - belt center adjustment manually via spindle - counterholder with quick clamping - circular protection ring - easily exchangeable clamping cylinder (service-friendly) - manual swiveling - direction of rotation changeover (top-bottom unwinding) load capacity max. 2.000 kg/side strip width max. 300 mm Coil inner diameter approx. 360 to 420 Coil inner diameter approx. 460 to 520 mm Coil outer diameter max. 1,800 mm with drive via three-phase geared motor and pneu. brake. drive power approx. 2.2 KW/side Unwinding speed approx. max. 40 m/min. Coil limitation via fixed limiting ring at the rear and adjustable counterholder (with quick clamping) at the front. Coiler stand with base frame with lateral shifting for coil center positioning. Currently without electric control. Can be re-engineered and offered on request.

Condition: used, Year of construction: 2021, input current: 21 A, input frequency: 50 Hz, We are offering this used HOMAG DRILLTEQ V-200 through-feed drilling machine, manufactured in 2021. The machine has been regularly serviced by HOMAG. The package includes a KOGI dust extraction unit (2.2 kW / 1,650 Pa), two collection bags, and various tools. Specifications Vertical drilling block with 13 spindles Horizontal drilling block with 4 spindles on the X-axis Horizontal drilling block with 2 spindles on the Y-axis Grooving saw, Ø100 mm Correctness control system 10 kW tool-changing spindle Maximum workpiece length: 200–3,050 mm Workpiece width: 70–850 mm Workpiece thickness: 8–56 mm PowerTouch display WoodWOP software included Machine Data Type: DRILLTEQ V-200 OPTIMAT BHX050 Serial number: 0-250-73-6562 Year of manufacture: 2021 Power supply: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Rated current at full load: 21 A Fuse rating: 25 A Control voltage: 24 V Itsdpfjy Extmjx Achjk The package also includes a KOGI dust extraction unit with a 2.2 kW motor and 1,650 Pa suction pressure, equipped with two collection bags, as well as various tooling. Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Isdpfxezrngys Achetk Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: good (used), Year of construction: 2001, For sale is a TOX Pressotechnik press, model MBG 004.124. The machine features a pressing force of 40 kN (equivalent to approximately 4 tonnes) and is suitable for industrial press-fitting, joining, assembly, riveting, embossing, and staking operations. A key highlight is its current certification status: The machine remains certified until April 2027. Technical Data Manufacturer: TOX Pressotechnik Type: MBG 004.124 Product Type: Press / Press-fit machine / Joining machine Pressing force: 40 kN Maximum air pressure: 5 bar Total stroke: 200 mm Power stroke: 80 mm Year of manufacture: 2001 Machine serial number: 210192.1 Machine/Electrical number: 210193.1 Nominal voltage: 230 V AC Control voltage: 24 V DC Frequency: 50 Hz Power: 0.2 kW Rated current: 0.5 A Back-up fuse: 16 A Protection class: IP65 Standard: DIN EN 60204 Circuit diagram: STE 325-26 Country of manufacture: Germany Certification valid until: 04/2027 Condition: Used The press operates with a total stroke of 200 mm. The actual power stroke is 80 mm, delivering a maximum pressing force of 40 kN. The machine is suitable for tasks such as press-fitting bushings, bearings, and pins, as well as for assembly, riveting, embossing, staking, and joining operations. Please refer to the images for the exact condition and scope of delivery. Itedpjznkvpefx Achek "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional presses and industrial machines—both new and used—in our shop! PD

Condition: excellent (used), Year of construction: 2012, Operating range V808 Min. / max. height 10 – 500 mm1 Min. / max. width 60 – 1.250 mm Max. positioning weight 13.200 kg Min. material length 1.200 mm Max. cutting width at the bottom 800 mm (only plasma marking and cutting) Plasma cutting unit* Hypertherm HPR260XD Virtually dross-free cutting max. 32 mm Marking lines Yes, marking and cutting with the same consumables Plasma gas mild steel O2 (99,9% pure clean, dry, oil-free) Shield gas mild steel O2/air (99,9% pure clean, dry, oil-free) Cutting speed 12 mm Approx. 3850 mm/min., 260A Cutting speed 20 mm Approx. 2170 mm/min., 260A Cutting speed 32 mm Approx. 1135 mm/min.; 260 A Fuse Additional 75 A slow is required Plasma Gas O2 (99,9% pure clean, dry, oil-free) Consumption 80l/min System pressure 10 bar * grounding, max. 6m of machine: AC power, PE, and service grounds must be connected to all equipment according to local and national codes. Itjdpjzcfpzefx Achsk Oxy-Fuel cutting unit Gas supply Magnetic valve with back-fire protection Ignition Automatically Gas Acetylene Consumption 20l/ min System pressure 2 bar Cutting Gas O2 Consumption 450l/ min System pressure 10 bar Operational direction From right to left Profiles 1 Flat steel Angles European standard channels (UNP) European I-beams (IPE) European standard beams (IPN) European wide flange beams (HE) British universal beams (UB) British universal columns (UC) Square tubes 1 Small profiles have to be sufficient straight. General Voltage Stabilizer Not included Ambient temperature 0 - 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: used, empty load weight: 6,120 kg, maximum load weight: 25,880 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 12/2007, loading space length: 7,500 mm, loading space width: 2,340 mm, loading space height: 1,450 mm, loading space volume: 25 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2-axle, SAF axles, air suspension, ABS (anti-lock braking system), catwalk, flap, U-protection, chute Body: steel body approx. 25m³ 2x 9t SAF axles, drum brakes! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Isdpfxsvhm E Rj Achotk - .

Condition: ready for operation (used), Year of construction: 2016, clamping force: 350 kN, total width: 1,973 mm, total height: 3,040 mm, overall weight: 5,200 kg, product length (max.): 1,300 mm, Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details. Itodpfx Asztdwwjchsk - CM 40/130V/60V Unilog B6- Hydraulic System Pressure: 247 / 210 bar- Pneumatic System Pressure: 6 bar- Rated Voltage: 400 V (3~N)- Control Voltage: 24 V DC- Frequency: 50 Hz- Rated Current (1st supply / 2nd supply): 78 A / 73 A- Max. Fuse Rating gl-gG (1st / 2nd supply): 80 A / 80 A- Short Circuit Current Rating SCCR: 10 kA- Working Height: 1000 mm- Total Height: 3040 mm- Machine Base Footprint: 1300 mm x 1060 mm- Total Width (including safety door swing): 1973 mm- Safety System: SICK C4000 light curtain barrier- Mold Clamping Dimensions: CM400, EBH-100, Width-100

Condition: used, functionality: fully functional, machine/vehicle number: 6470357, Year of construction: 2017, operating hours: 5,844 h, load capacity: 1,600 kg, lifting height: 4,500 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, fork length: 1,200 mm, empty load weight: 1,742 kg, drive type: Elektro, High lift truck Chassis number: 6470357 Itsdpeuhwu Defx Achek Mast type: Triplex Technical condition: good Battery Volt: 24V Battery year of construction: 2017 Description: BT SPE 160 No.: M0495 Year of construction: 2017 Operating hours: 5,844 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We have a large selection of other trucks on site.

Condition: used, empty load weight: 7,250 kg, maximum load weight: 26,750 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/2010, loading space length: 7,350 mm, loading space width: 2,340 mm, loading space height: 1,600 mm, loading space volume: 26 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 3-axle, BPW axles, air-suspended, 1st axle liftable, lifting+lowering, ABS (anti-lock braking system), roller tarpaulin, catwalk, flap, U-protection, chute, supports Body: Steel body approx. 26m³ with platform and roller tarpaulin 3x 9t BPW axles, drum brake! Isdpfx Acjvhitdjhjtk Internal tailgate! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, empty load weight: 7,250 kg, maximum load weight: 26,750 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/2010, loading space length: 7,350 mm, loading space width: 2,340 mm, loading space height: 1,600 mm, loading space volume: 26 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 3-axle, BPW axles, air-suspended, 1st axle liftable, lifting+lowering, ABS (anti-lock braking system), roller tarpaulin, catwalk, flap, U-protection, chute, supports Itedpfx Acsvhitkjhjk Body: Steel body approx. 26m³ with platform and roller tarpaulin 3x 9t BPW axles, drum brake! Internal tailgate! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, functionality: fully functional, machine/vehicle number: 6146945, Year of construction: 2011, operating hours: 5,967 h, load capacity: 1,250 kg, lifting height: 4,550 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, fork length: 1,150 mm, drive type: Elektro, High-lift stacker Chassis number: 6146945 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Good Description: BT SPE160L – Electric High-Lift Stacker with Triplex Mast and 1,150 mm Forks Year: 2011 | Operating hours: 5,967 h | Load capacity: 1,250 kg Reliable BT SPE160L electric high-lift stacker with triplex mast and standard fork length of 1,150 mm – ideal for warehouses, racking systems, and internal transport. The machine is fully operational, immediately ready for use, and in good technical and visual condition. Technical specifications: Isdpfx Acexzvwrohetk - Type: High-lift stacker - Make: BT - Model: SPE160L // 1,150 mm forks - Year: 2011 - Operating hours: 5,967 h - Load capacity: 1,250 kg - Mast type: Triplex - Lift height: 4,550 mm - Closed height: 2,150 mm - Fork length: 1,150 mm - Battery: included - Charger: available on request - Condition: technically and visually good - Location: available immediately Notes: - Sale in the current used condition - All prices net, plus 19% VAT - Sale only to commercial buyers with valid VAT ID - No warranty or guarantee

Condition: used, empty load weight: 7,250 kg, maximum load weight: 26,750 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 04/2010, loading space length: 7,350 mm, loading space width: 2,340 mm, loading space height: 1,600 mm, loading space volume: 26 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 3 axles, BPW axles, air suspension, first axle liftable, raise/lower function, ABS (anti-lock braking system), sliding tarp, catwalk, tailgate, underrun protection, chute, supports Body: steel tipper body approx. 26 m³ with platform and sliding tarp, several available, year of manufacture 2010 to 2016, priced from €10,000 to €16,000, 3x 9t BPW axles, drum brakes! Itjdpfevhitqex Achok Internal rear tailgate! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 230 mm, feed rate X-axis: 36 m/min, total width: 1,860 mm, total length: 3,500 mm, total height: 1,830 mm, number of planer blades: 4, power: 47.25 kW (64.24 HP), Offered for sale is a high-performance four-sided planer moulder manufactured by JKS & Trade Moravia s.r.o., model QMB623W – MBQ623W, purchased new in 2021. The machine has seen minimal use only for 2 years, as it was originally acquired for a production project that was not implemented. Technical Specifications: Working width: 18–230 mm Working thickness: 10–160 mm Feed speed: 7–36 m/min (adjustable) Tool diameter: 125 mm (max) Power supply: 400V / 50Hz / 3-phase Installed power: 47.25 kW Main fuse: 100 A Machine dimensions: 3500 × 1860 × 1830 mm Weight: 6,000 kg CE compliant The machine is fully operational, regularly maintained, and comes with original documentation, including the operator manual. Suitable for precise and efficient four-side profiling of solid wood components. Isdpfxsxup Ecj Achstk 📍 Location: Czech Republic The machine is available for immediate inspection and dispatch. 📩 Please contact us for pricing, detailed photos, or to arrange a viewing.