Used Hh Fuse for sale (1,517)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Success:
Your message has been sent.
Listing
Germany
1,293 km
Parts Cleaning System
Dürr Ecoclean44H-HCS
Call
Year of construction: 2004, condition: ready for operation (used), Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible.
Ibjdjxwcvgopfx Ab Tod
Success:
Your message has been sent.
Listing
Wtelno
1,728 km
Storage tank
Stainless steel tank 50700lwith heating coil
Call
Condition: good (used), Stainless steel tank 50700l
Diameter 3m
Height 7.7m
Stainless steel coil inside at the bottom of the tank.
AISI304 stainless steel
Flat bottom with a slope of 2.5% downwards.
- Stainless steel hatch 410 x 520 with outward opening
Ibsdpfx Abstr Dvaj Ted
- Stainless steel drain valve DN70
- Stainless steel test pipe
- Liquid level gauge
16 pieces available.
Success:
Your message has been sent.
Listing
Wiesbaden
1,190 km
Walking Stacker
STEINBOCKEHH
Call
Year of construction: 1979, condition: used, machine/vehicle number: 21143-7331, lifting capacity: 1000 kg
stroke: 2800 mm
fork length: 1120 mm
weight: 420 kg
dimension: 900 x 1700 x 1960 mm
Iodpfob Nwc Hex Ab Tsbd

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Success:
Your message has been sent.
Listing
Aschersleben
1,339 km
Suction lifter
BystronicVHG 550 SH HDL
Call
Condition: good (used), Year of construction: 2014, Lifting capacity: 550 kg.
Weight: 100 kg.
Condition: good, second-hand
Ijdpfx Asx Dtfrjb Tsbd
Success:
Your message has been sent.
Listing
Emskirchen
1,384 km
Case Press and Joint-Setting machine
SchmedtPräForm HHS 2100
Call
Condition: used, Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem
Einbrennen des Falzes.
The PräForm is a machine to press books after casing-in, setting the joint at the same time and
processes single books just as well as series of books.
Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100
Case Press and Joint-Setting machine Schmedt PräForm HHS 2100
Baujahr / Year Serial-Nr. 77
Buchhöhe / Book height: 100 - 520mm
Buchbreite / Block width: 120 - 400mm
Blockstärke / Block tickness:: 8 - 100mm
Leistung / Output: ca. 150 St/h
Pressluftanschluss / Air supply: 6bar
Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW
Ibsdpfxoxgi Hqo Ab Ted
Online-Video-Inspection by WhatsApp - MS Zoom - Telegram
On Stock Emskirchen/Nürnberg - Available Immediately - Can be test
Discover more used machines
Success:
Your message has been sent.
Listing
Burgoberbach
1,385 km
Horizontal CNC machining center
DMGDMC 80 H Hi-Dyn 4-Achs
Call
Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 288-40003902, travel distance X-axis: 800 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, table width: 500 mm, table length: 630 mm, For sale is a horizontal machining center DMC 80 H hi-Dyn with 4 axes.
The machine has only been used for milling and drilling cast parts for surface finishing. The spindle is in very good condition.
Technical specifications:
Travel paths:
X-axis: 800 mm
Y-axis: 800 mm
Z-axis: 800 mm
B-axis: 360°
Table data:
Table size: approx. 630 × 500 mm
Max. workpiece weight: ~1,200–1,400 kg
Rotary table: 4th axis, 360° continuous
Spindle:
Direct drive, liquid cooled
Replaced in 2023/2024
Measuring system:
Glass scales
Main drive:
Max. speed: up to 10,000 rpm
Spindle power: approx. 20 kW
Ibjdpfxeytf N As Ab Tsd
Torque: S1 – 100% duty cycle
Transport dimensions:
LxWxH in meters: 5.2 x 2.4 x 2.7
Machine transport weight: 12,500 kg
Dismantling, loading, and transport throughout Europe can be organized upon request for an additional charge.
All prices are plus VAT.
Inspection possible by appointment. Contact us — our team will be happy to assist you.
Trade-in or exchange possible!
Machinery purchase & sales
PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES ETC.
Are you looking for a high-quality but affordable metalworking machine for your production? Or would you like to sell yours?
For further information or contact options, please visit our website.
Success:
Your message has been sent.
Listing
Borken
1,034 km
Weiss temperature test chamber WT-600/70/5 -70°C to +180°C, 600 liters
WeissWT-600/70
Call
Condition: used, Weiss
Weiss Umwelttechnik WT-600/70/5
Iedpfx Ajy At Sxjb Tebd
Temperature testing chamber -70°C to +180°C
Water-cooled
For sale is a used temperature testing chamber from Weiss Umwelttechnik.
The unit is functional and has been inspected.
This is a temperature testing device without a humidity function.
The chamber is suitable for testing components, electronics, and materials
under extreme temperature conditions.
It is often used in industry, development, and quality assurance.
The temperature range is from -70°C to +180°C.
The unit can heat up and cool down quickly and operates with forced air circulation
for uniform temperature distribution inside.
Cable feedthroughs with 125 mm and 50 mm are available.
Technical data:
Test chamber designation: WT-600/70/5
Cold/heat operation -70°C to 180°C
Temperature change per unit of time
Cooling: approx. 6 K/min
Heating: approx. 6 K/min
External dimensions with hinges and door lock
Height 1995 mm, Width 1090 mm, Depth 1660 mm
External dimensions without hinges and door lock
Height 1995 mm, Width 1000 mm, Depth 1660 mm
Internal dimensions:
Height 950 mm, Width 800 mm, Depth 800 mm
Test chamber volume: approx. 600 liters
3/N/PE AC 400V ±10% 50Hz
Rated power: 16 kW
Rated current: 19 A
Fuse (customer-supplied): 29 A slow-blow
Permissible test item weight
Total load capacity of the shelf supports: 80 kg
Test chamber floor: 80 kg, Insert shelf: 40 kg
Refrigerant: R 404A/R23
Weight: 675 kg
For your peace of mind as a buyer, the following information!
The following steps are performed on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. Refilling with legally compliant refrigerant
3. After a successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments.
Condition: used
Scope of delivery: (See image)
(Changes and errors in technical data and information are subject to change!)
We will gladly answer any further questions you may have by telephone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
EA Elektro-Automatik laboratory power supply EA-EL 9080-200 (2.4 kW) 0-80V 0-200A
EAEL 9080
Call
Condition: used, EA Elektro Automatik
Type: EA-EL 9080-200
EA Elektro-Automatik Electronic Load (2.4 kW) 0-80 V 0-200 A
Technical Data:
Mains Input:
Mains voltage switchable 115 V / 230 V
Mains frequency 50/60 Hz
Mains fuse T2.5 A
DC Input:
Input voltage U nominal 0…80 V
Input power P nominal 0…2400 W, with temperature-dependent derating
Continuous power 1500 W at 20°C ambient temperature
Input current I nominal 0…200 A
Overvoltage protection limit 1.1 * U nominal
Maximum permissible input voltage 100 V
Voltage regulation:
Ibsdpfxszhkcie Ab Tsd
Setting range 0…80 V
Display resolution 100 mV
Accuracy
Success:
Your message has been sent.
Listing
Borken
1,034 km
CTS TSS-70/130 Thermal Shock Test Chamber -80°C to +200°C, 130 liters, water-cooled
CTSTSS-70/130
Call
Condition: used, CTS
Temperature Shock Chamber / Temperature Test Chamber
CTS TSS-70/130 Temperature Shock Chamber
Water-cooled temperature shock chamber, approx. 130 liters
For sale is a used temperature shock chamber
from the manufacturer CTS Clima Temperatur Systeme GmbH.
The test chamber is suitable for temperature shock tests,
cyclic temperature tests, material testing, quality assurance
as well as development and stress tests.
Technical data
Manufacturer: CTS Clima Temperatur Systeme GmbH
Type: TSS-70/130
Device type: Temperature shock chamber / Temperature test chamber
Test volume: approx. 130 liters
External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H)
Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H)
Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H)
Window: approx. 300 x 300 mm
Weight: approx. 950 kg
Temperature range, hot chamber: +50 °C to +200 °C
Temperature range, cold chamber: -80 °C to +100 °C
Temperature change rate: max. 100 K/min on average
Changeover time: < 10 seconds
Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C
Heating rate: approx. 6 K/min from room temperature to +180 °C
Cooling rate: approx. 4 K/min from room temperature to -60 °C
Temperature deviation (time): ±1 K
Temperature deviation (spatial): ±2 K
Power connection: 400 V 3/N / 50 Hz
Power: 16.6 kW
Rated current: 28.0 A
Fuse rating: 32 A slow-blow
Protection class: IP22
Refrigerant, precooling stage: R404A
Refrigerant quantity, precooling stage: 4.0 kg
Refrigerant, cooling stage: R23
Refrigerant quantity, cooling stage: 0.6 kg / 10 bar
Operating pressure PS: 25 bar
Water-cooled version
Cooling water connection required
Compressed air connection required
Operation only possible with cooling water and compressed air
Cooling water inlet: 3–6 bar
Equipment
CTS control panel
Microprocessor-controlled control and monitoring system
Program operation
Digital setpoint and actual value display
RS232 interface
RS485 interfaces
Potential-free contact
Digital inputs and outputs
Hot and cold chamber
Mobile frame with screw drive
Test chamber / mobile frame made of stainless steel
Insert tray made of stainless steel wire
Pipe penetration NW 50 with sealing plug
Compressed air connection 1/4" male thread
Condensate drain R 1/2" female thread
Safety door locking
Lockable door with viewing window
Documentation / operating manual
Accessories according to images
Application areas
Temperature shock testing
Cyclic temperature testing
Material testing
Electronics testing
Component testing
Aging tests
Quality assurance
Research and development
Condition
Used
Optical condition according to images
Scope of delivery
Ibjdezf Ibkspfx Ab Tsd
1x CTS TSS-70/130 temperature shock chamber
Insert tray / test chamber equipment
Available documentation / documents
Operating manual
Accessories according to images
Important note:
For the safety of our customers, the following work will be carried out on the offered climate chambers in advance:
1. Functional check and replacement of any necessary components
2. If necessary, refilling with legally compliant refrigerant
3. Leak test with certificate
4. Documented test run after successful inspection
Objects,
machines or other accessories shown in the images
that are not explicitly described
are not included in the scope of delivery.
Shipping or freight forwarding possible.
Subject to changes, errors and prior sale.
We are happy to answer any further questions by telephone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
BÖLLHOFF RIVSET control unit for punch riveting system 6039402
BöllhoffRIVSET Stanzniet-System
Call
Condition: used, BÖLLHOFF
Ijdpezgaahefx Ab Tobd
Type: 6039402
Control unit for RIVSET blind riveting system
Operating voltage: 400V 50 Hz
Rated current: 13A
Main fuse: 20 A
Control voltage: 24 V
Signal voltage: 10 V
Year of manufacture: 2011
with Hydac cooling unit OK-EL2S/3.0/M/400-50/1
The system was inspected by the manufacturer and is functional.
Condition: used
Scope of delivery: (See image)
(Changes and errors in the technical data are subject to change!)
We would be happy to answer any further questions you may have by telephone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
Rietbergwerke AdBlue Refueling Cart HT-Mobilus 200 AdBlue
RietbergwerkeBetankungswagen
Call
Condition: used, AdBlue Tanker
Type: HT-Mobilus 200 AdBlue
Whether in the automotive industry or directly in vehicle maintenance:
the MOBILUS AdBlue system enables safe and economically efficient refueling of your vehicles.
The mobile refueling system MOBILUS AdBlue complies with all relevant technical and legal regulations
Ibjdpfjzgcl Hjx Ab Tjd
and is therefore also used in research and development projects.
Convince yourself of the quality of this mobile urea refueling unit.
Technical data:
Manufacturer: Rietbergwerke GmbH & Co. KG
Type: HT-Mobilus 200 AdBlue
Year of manufacture: 2018
Technical data:
Dimensions L x W x H: 142 x 73 x 135 cm
Empty weight: approx. 260 kg
Usable volume of tank: approx. 175 liters
Power supply:
Connected power: 3.0 kW
Connection voltage: 400/230V / 50 Hz NPE
Fuse: 16A
Heater: Connected power: 4.0 kW
Connection voltage: 400V
Delivery pump:
Power: 0.75 kW
Supply voltage: 400V / 50 Hz
Other technical data:
Suction and circulation pump: Power: 0.4 kW
Supply voltage: 230V / 50 Hz
Dispensing valve:
Flow rate: max. 40 l/min
Operating pressure: 0.5 – 3.5 bar
Control range:
Flow rate: 3.5 l/min – 45.0 l/min
Temperature: 15°C – 45°C
Frequency converter: 1,800 1/min
BNC sockets: Output: 0 – 10V
Temperatures:
Operating temperature: max. 45°C
Storage temperature: up to -30°C
Materials
Tank: LDPE
all other product-contacting components: LDPE or stainless steel
Transport trolley: Steel, powder-coated
Seals / hoses: EPDM
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by telephone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
Weiss Temperature Test Chamber WT3-600/70/5, 600 liters, -70°C to +180°C
WeissWT3- 600/70/5
Call
Condition: used, Weiss
Type: WT3-600/70/5
Weiss temperature testing cabinet WT3-600/70/5
water-cooled version
with S!MCON / 32 control system and touch panel
Control panel "Touch Panel"
By simply touching the function symbols on the "Touch Panel" control panel, all control and operating commands can be activated.
Adjustable feet
To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing cabinet is equipped with adjustable feet.
Feedthroughs
The testing cabinet is equipped with feedthroughs on the right and left sides.
These allow measuring cables and testing equipment to be routed into the test chamber.
Feedthroughs installed as standard:
R1: DN 125 mm
L1: DN 50 mm
Test chamber volume: approx. 600 liters
External dimensions including hinges and door lock:
Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm
External dimensions excluding hinges and door lock:
Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm
Internal dimensions:
Height: 950 mm, Width: 800 mm, Depth: 800 mm
Data for temperature tests:
Temperature range: -70 °C to +180 °C
Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K
Temperature deviation spatially: ± 0.5 to ± 1.5 K
Temperature change rate (according to IEC 60068-3-5):
Ibodpfxey Nibps Ab Tjd
Heating: 7.5 K/min
Cooling: 7.5 K/min
Maximum heat compensation: 2500 W
Data for operation:
Test chamber lighting: Halogen bulb 2 x 24V, 50W
Rated voltage: 3/N/PE AC 400V ±10% 50Hz
Rated current: approx. 23 A
Rated power: approx. 13 kW
On-site fuse protection: 16 A slow-blow
Sound pressure level:
Measured at a distance of 1 m in front / 1 m height: approx. 58 dB(A)
Refrigerant:
R-404A / R23
Weight: approx. 620 kg
For your safety as a buyer, here is the following information:
The following steps are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If necessary, refill with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by telephone.
Success:
Your message has been sent.
Listing
Lanškroun
1,749 km
Laminating machine
KomfiSagitta 76 with Hot Knife and B1 Stacker
Call
Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker
Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year.
Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils.
Also digitally printed job can be easily and conveniently processed on the machine.
Well suited and highly applicable for both commercial printing and the packaging industry.
Energy saving zone heating system with fastest heat up time.
Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h)
Max sheet size 760 × 1120 mm (up to 1300 mm)
Paper weight 115-600 g/m²
Machine dimensions (incl. delivery desk) 4.25 x 1.55 m
Basic configuration
Feeder:
Komfi double action feeding head for reliable feeding even at high speed and small format.
Front lay register for precise and constant sheet overlap.
Compressor for feeder.
Sheet overlap sensor for protection of pressure roller from film sticking in case
of a miss-feed.
Adjustable separation blowers for reliable separation of sheets from the pile
Ibsdpszdnpxjfx Ab Tod
and trouble-free loading of long sheets.
Laminating Unit:
Powerful pneumatic pressure system to ensure excellent laminating result.
Adjustable distance stoppers to enable processing thick substrates and windows lamination.
Air shaft for 3″ reel core laminating film.
”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller.
Zone heating of the laminating roller saves energy when laminating small formats.
Temperature sensor inside the cylinder for extremely precise regulation.
PUR pressure roller for longer roller life.
Separator & Delivery:
Rotary separation knives for reliable film separation at high speed.
Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable.
Pneumatic driven separation roller.
Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets.
Adjustable speed of snapping roller for perfect separation of difficult jobs.
Jogging table.
SW functions included
Stop on the sheet overlap to avoid waste sheets.
Zero overlap possibility for processing thick substrates.
Automatic pressure and temperature detection to prevent irregularity in lamination quality.
End of job function for easy rewind of film.
Sensor for sheet separation detection and jam detection.
Job settings memory
Built-in internet connectivity for service support.
Available options
Film slitter to cut film to the requested width.
Additional On roll perforator.
Integrated or External Effect foiling device (OTF).
Universal pallet positioning kit enables to load variety of different pallets into the machine.
Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging.
Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers.
Windows lamination kit.
Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination.
Automatic sheet stacker (pallet stacking).
Success:
Your message has been sent.
Listing
Emskirchen
1,384 km
Duct Fan Extraction
TEKAFiltercube 4H HV 11kW
Call
Condition: used, Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW
Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW
TEKA-Dosiereinrichtung für Precoat, Filterpatronen gegen Verkleben schützen /
TEKA Precoat Dosing Unit: Protecting Filter Cartridges Against Clogging
Baujahr / Year 2018 - Serial-No. 9501442110402
Ibsdpfozav Ebjx Ab Tod
Filtersteuerung mit automatische Filterabreinigung / Filter Control with Automatic Filter Cleaning
Motorleistung 11 kW / Motor power 11 kW
Leistungsstarker Ventilator mit Steuerung / High-Performance Fan with Controls
Ausführung SelfClean / SelfClean Version
Ausstattung / Equipment:
Standard Filterpatronen, Filterfläche je nach Luftleistung / 4 standard filter cartridges; filter area varies depending on airflow capacity
Display gesteuerte Filterabreinigung / Display-controlled filter cleaning
Ventilatorsteuerung / Fan Control
Bogenschalldämpfer für Luftaustritt nach oben / Elbow Silencer for Upward Air Discharge
Rauche und Stäube werden mit einer Filterleistung von über 99 % sicher abgeschieden / Smoke and dust are safely separated with a filtration efficiency of over 99%
Online-Video-Inspection by WhatsApp - MS Zoom - Telegram
On Stock Emskirchen/Nürnberg - Available Immediately - Can be test
Success:
Your message has been sent.
Listing
Borken
1,034 km
Vötsch temperature test chamber, 190 liters, temperature range -70°C to +180°C, model VTS 7018-5.
VötschVTS 7018-5
Call
Condition: used, Vötsch
Type: VTS 7018-5
Water-cooled temperature test chamber
System converted to R-452A
Temperature range: -70°C to +180°C
Isdeziixxepfx Ab Tebd
Temperature deviation (temporal): ±0.1 to ±0.5 K
Temperature deviation (spatial): ±0.5 to ±2.0 K
Temperature change rate (cooling): 7.5 K/min
Temperature change rate (heating): 7.5 K/min
Thermal compensation at +20°C: 3000 W
Thermal compensation at -20°C: 3000 W
Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm
External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm
Test chamber volume: 190 liters
Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz
Rated power: 100 kW, Rated current: 21 A
Fuse, on customer side: 32 A, slow-blow
Sound level at 1m distance (free-field measurement): < 69dB (A)
Side feed-through: 50 cm / 125 cm
Chamber is water-cooled
Refrigerant: R-452A and R23
Weight: approx. 460 kg
For your safety as a buyer, please note the following:
The following points are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If necessary, refilling with legally compliant refrigerants
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of delivery: (See image)
(Changes and errors in the technical data and information are subject to change!)
We will be happy to answer any further questions you may have by phone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
Vötsch Climate Test Chamber VC 7018 Temperature Range -70°C to +180°C with Humidity Control, 190 Lit
VötschKlimaprüfschrank
Call
Condition: used, Vötsch
Type: VC 7018
Vötsch Climate Testing Chamber VC 7018, Water-Cooled
Control Panel: “Touch Panel”
All control and operating commands can be initiated by simply touching the function symbols on the “Touch Panel” control panel.
Adjustable Feet
To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing chamber is equipped with adjustable feet.
Ibjdpfx Aezh Huhob Tjd
Feedthroughs
The testing chamber is equipped with feedthroughs on the right and left sides.
These allow measuring cables and testing equipment to be routed into the testing chamber.
Feedthroughs installed as standard:
R1: 125 mm
L1: 50 mm
Testing chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm
Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm
Performance data for temperature tests:
Temperature range: -70°C to +180°C
Temporal: ±0.1 to ±0.5 K
Spatial: ±0.5 to ±2.0 K
Temperature change rate according to IEC 60068-3-5
Heating: 4 K/min.
Cooling: 2.3 K/min.
Performance data for climate tests:
Temperature range: -10°C to +95°C
Humidity range: 10% to 98% RH
Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.3 K
Spatial temperature deviation: ±0.5 to ±1.0 K
Temperature gradient: 1 to 2 K
Temporal humidity deviation in the center of the usable space: ±1 to ±3 % RH
Electrical connection:
Rated voltage: 3/N/PE AC 400V ±10 50Hz
Rated power: 5.9 kW
Rated current: 12.0 A
Connection cable: 3.5 m
Fuse: 16 A, slow-blow, provided on site
Refrigerant: R-404A and R-23
Testing chamber volume: approx. 190 liters
Weight: approx. 460 kg net
For your safety as a buyer, please note the following information!
The following steps are carried out on our offered chambers in advance:
1. Functional check and replacement of any necessary components
2. If necessary, refill with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data and specifications are subject to change!)
We will gladly answer any further questions you may have over the phone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
Climate test chamber with humidity control
Feutron3707/06 Temp. -40°C bis 150°C
Call
Condition: excellent (used), Here we offer a Feutron climate test chamber.
Feutron Climate Test Chamber
Temperature
Ijdszd Sdgjpfx Ab Tobd
Temperature range: -40...90°C
Climatic range (without heat load): 10...85°C
Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min
Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min
Change rates
Heating: avg. 2.0 K/min
Cooling: avg. 2.0 K/min
Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump)
Drying
Air drying: condensation drying
Humidity
Air humidification: steam humidification
Humidity range: 10...95 % r.h.
Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h.
Dew point range: 8...80.9°C
Test Chamber
Test chamber volume: 7.0 m³
Dimensions
Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm
Swing door DIN right, heated, Width 900 mm x Height 2100 mm
Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm
Feedthrough: 2x, right front side, Ø 75 mm
Irradiation unit, test chamber
Opening: 4x in left side wall for SC 2500, each 850 x 700 mm
Irradiated area when using SC 2500: 1200 x 1200 mm
Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m²
Lighting: 1x halogen lamp, 200W
Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled
Condenser: split condenser (outdoor installation, winter control)
Refrigerant: R507 / R23
Temperature control system
Coolant medium Tyfocor / water
Mixing ratio 50/50%
Coolant density: 1.072 kg/dm³
Filling quantity: approx. 80 dm³
Pyranometer
Temperature range: -40...150°C
Max. radiation absorption: 4000 W/m²
Spectral range (50% points): 305...2800 nm
Sensitivity (nominal): 7 µV/W/m²
Power supply, test chamber
Mains connection: 400V, 3/N/PE, AC, 50Hz
Connection type: hardwired
Max. simultaneous power demand: approx. 32.0 kW
Supply fuse: 3 x 63, Char C (A)
Power supply, SolarConstant
Mains connection: 400V, 3/N/PE, AC, 50Hz
Connection type:
Max. simultaneous power demand: approx. 30.0 kW
Supply fuse: 3 x 63, Char C (A)
Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500
External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm
/control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm
External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm
Weight test chamber (total): approx. 2700 kg
Condenser empty weight: 153 kg
Weight: 2700 kg
Type: 3707/06
Condition: used
Scope of delivery: (see picture)
(Technical data and information are subject to change and errors!)
For further questions, we are happy to assist you by phone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
EA Elektro-Automatik EA-PS 9500-90 3U DC Power Supply 500V 90A 15kW HEIDEN
EAPS 9500-90 500V
Call
Condition: used, EA Elektro-Automatik / HEIDEN power
Programmable DC High-Power Supply / Laboratory Power Supply
EA-PS 9500-90 3U / HEAPS 9500-90 3U
0–500 V DC / 0–90 A / 15 kW
19" design with USB, LAN and remote sensing
For sale is a used programmable DC high-power supply from the EA-PS 9000 3U series.
This power supply is suitable for high-performance DC power supply and testing applications, laboratory and development applications, component and assembly testing, automotive applications, as well as test and measurement systems.
The flexible, power-controlled output stage enables an output range of 0–500 V DC and 0–90 A with a maximum output power of 15 kW.
Technical data:
Manufacturer / Design: EA Elektro-Automatik / HEIDEN power GmbH
Model: EA-PS 9500-90 3U / HEAPS 9500-90 3U
Device type: Programmable DC high-power supply
Design: 19" / 3U
Article number:
Output voltage: 0–500 V DC
Output current: 0–90 A DC
Max. output power: 15 kW
Efficiency: approx. 95%
Residual ripple voltage: ≤ 350 mVpp / ≤ 70 mVrms
Residual ripple current: ≤ 48 mArms
Remote sensing voltage compensation: approx. 10 V
Programming resolution voltage: ≤ 21 mV
Programming resolution current: ≤ 4 mA
Mains connection: 400 V AC, L1 / L2 / L3 / PE
Rated current: 3 × 28 A
Frequency: 45–65 Hz
Type of current: AC
Fuse: 6 × 16 A T
Protection functions:
Overvoltage protection OVP
Overcurrent protection OCP
Ibsdpfxozx D Exs Ab Tod
Overpower protection OPP
Overtemperature protection OTP
Dimensions:
Design: 19" × 3 U
Case depth according to manufacturer: approx. 609 mm
Front width: approx. 483 mm
Height: approx. 133 mm
Weight: approx. 31 kg
Features:
Color TFT display
Two rotary encoders for setting the target value
Control buttons
USB interface
Ethernet / LAN interface
Galvanically isolated analog interface
Remote sensing / Remote Sense
Share-Bus connection
Rear high-current DC connections
Temperature-controlled fan cooling
Front-mounted main switch
19" rack mounting
Interfaces and control:
USB Type B
Ethernet / LAN
Analog interface
SCPI support
ModBus RTU/TCP support
Remote-Sense connection
Application areas:
Laboratory and development
Research
Automotive testing technology
Electronics testing
Component testing
Assembly testing
Power electronics
Battery and energy systems
Production testing
Quality assurance
Test benches and test systems
Scope of delivery:
1x EA Elektro-Automatik / HEIDEN power EA-PS 9500-90 3U High-Power Supply
Scope of delivery as shown in the picture
Condition:
Used
Optical condition according to pictures
Normal signs of use and storage are present
The table shown in the photos and other items not explicitly mentioned are not part of the sale.
Shipping or freight shipping is possible.
Subject to changes, errors and prior sale.
We will be happy to answer any further questions by telephone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
Scienlab Battery Test System
KeysightSL1000A 1000V 900A 360kW
Call
Condition: excellent (used), Year of construction: 2019, KEYSIGHT TECHNOLOGIES
Scienlab Battery Test System
Keysight SL1000A
1000 V / 900 A / 360 kW – water-cooled
Used bidirectional battery test system for testing high-voltage batteries and energy storage devices with controlled charge/discharge cycles and electrical measurement data acquisition.
Technical data:
Manufacturer: Keysight Technologies / Scienlab
Model: SL1000A; 1 channel
Declaration of Conformity: 03/27/2019
Acceptance/Calibration documents: 04/16/2019
Electrical output data:
Output voltage: 50–1000 V DC
Output current: ±900 A DC continuously
Output power: max. ±360 kW/channel
Current rise time: under 2 ms (typically 1.6 ms)
Mains connection:
400 V AC / 50 Hz; 3 (N), PE
Rated current: 2 × 290 A
Fuses: 2 × 315 A gG
Efficiency: over 90%; cos φ over 0.98
Power loss: under 36 kW
Measurement data acquisition:
Voltage: 4-wire; ±0.05% of measured value ±300 mV offset
Current: ±0.05% of measured value ±180 mA offset
Current ripple: ±0.2% up to 3.6 Aeff.
Temperature: 3 × PT100, 4-wire, -50 to +130 °C; ±1 K
Measurement and communication data:
8 analog inputs, 0–20 mA, 32 bit
Sampling rate: max. 20 kS/s
CAN: 500 kBaud; MCM: Ethernet
Optional: BMS-CAN, climate chamber Ethernet
Cooling water supply:
Water-cooled; heat to be dissipated: 36 kW
Supply: 6–20 °C; return: max. 30 °C
Flow rate at full load: approx. 2 m³/h
Supply pressure: max. 6 bar
Iedpe Ah Splofx Ab Tjbd
Pressure difference: over 1.5 to 3.0 bar
Connections: 1 inch male thread; condensate: 3/4 inch male thread
Dimensions and operating conditions:
External dimensions (W × D × H): approx. 3820 × 880 × 2500 mm
Weight: approx. 2900 kg
Protection class: IP54; protection class I
Environment: +5 to +40 °C; 30–75 % rel. humidity
Operating altitude: max. 2000 m above sea level
Equipment:
Modular power modules, resonant converter, internal cooling water circuit, cooling unit, DC output, output and mains circuit breakers/chokes, EMC filter, measurement/control unit, insulation monitoring, overvoltage protection, main switch, emergency stop, key switch for test release, signal light.
Applications:
HV battery testing, battery development, energy storage testing, charge/discharge testing, test benches, research and automotive industry.
Documentation:
Manufacturer's operating manual, declaration of conformity, acceptance and calibration records from 2019; further documents as shown in the images. No statement regarding current calibration.
Condition:
Used; optical condition as shown in the images.
Scope of supply:
1 × Keysight SL1000A Scienlab Battery Test System; documentation and accessories as shown in the images.
Shipping or freight shipping possible.
Subject to changes, errors and prior sale.
We would be happy to answer any further questions by phone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
3DMICROMAC laser marking system microCUT with IPG YLS-5000 laser, control cabinet equipped with indu
microCUT3D MICROMAC Lasermarkiersystem
Call
Condition: used, 3D MICROMAC
Type: microCUT laser marking system
microCUT
Enclosure
IPG laser source
Raylase 3-axis scanning system
Power measurement head 1
Power measurement head 2
Camera system for positioning
Camera system for quality inspection
Cooler
Extraction system
Control cabinet with IPCs
Coolant distributor
Machine dimensions:
Machine weight: 2 tons
Width 922 mm, Depth 4653 mm, Height 2925 mm
Components:
Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm
Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm
Weight (without filling) 500 kg
Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm
Weight 500 kg
Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm
Machine connections:
Electrical: Mains voltage 3*400 VAC/N/PE
Mains current consumption 74A
Frequency 50/60Hz
Power consumption 51.3kW
Control voltage 24/5VDC
Main fuse NH 100A gG
Modules:
Laser source: Mains voltage 400 VAC
Frequency 50/60Hz, Power 16.7 kW, Current consumption 59A
Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A
Machine: Consumable media
Working pressure 6-10 bar
Temperature 10-50°C
Quality ISO 8573-1
Solid particles: Class 1
Oil: Class 1
Water: Class 4
Residual oil content < 10µg/m³
Water content < 6 g/m³
Pressure dew point 3 °C
Iodpfxezdqp Is Ab Tebd
Consumption < 120 l/min
Cooling water cooling unit module:
Cooling water outlet temperature 21°C
Cooling water return temperature 26°C
Setpoint tolerance 1K
Cooling water flow rate 69 l/min
Free pump pressure 1.5 bar
DI water cooling unit
Cooling water outlet temperature 26°C
Cooling water return temperature 31°C
Setpoint tolerance 1K
Cooling water flow rate 10 l/min
Free pump pressure 1.5 bar
Laser source manufacturer IPG Type: YLS-5000 Mode Continuous, Quasi-continuous
Wavelength 1070nm
Power 5kW Frequency 5 kHZ
Scanner manufacturer Raylase AG
Type: Axialscan-30-Y
Field size 1000x1000 mm
Spot diameter 87 1/e²(µm)
Resolution < 31 µm
Working distance 1198 mm
Cooling unit: Manufacturer Riedel
Type: PC 250.01-NZ-DI-S
Refrigerant R407C
50 Hz
Net cooling capacity 38 kW
60Hz
Net cooling capacity 40.3 kW
Camera system: Manufacturer e2V Type: AVIIVA TM UM2 GE
Quality cameras: Manufacturer e2v type: DiViiNA LM1 CL
Extraction system: Manufacturer Donaldson Filtration Type: DOWNFLO Oval 3-3
Max. Fan speed 3000 rpm
Working pressure: 4.2 bar
Pulse duration 100ms
Volume of the pressure vessel 92 l
Type: microCUT laser marking system
Condition: used
Scope of delivery: (See pictures)
(Changes and errors in the technical data and specifications are subject to change!)
We would be happy to answer any further questions you may have by phone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
Weiss Climate Chamber WK-600/70 (I)-(II) 2 G EEx Temp. -70 to 180°C (explosion-proof)
WeissWK-600/70
Call
Condition: used, Weiss
Type: WK-600/70 (I)-(II) 2 G EEx /22605147
Weiss Climate Chamber, Water-Cooled
(Test chamber, explosion-proof)
Ibodpfxozh D Rye Ab Tod
INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER
Technical Data:
Test chamber designation: WK-600/70 (I)-(II) 2 G EEx
External dimensions with hinges and door closure
Height 1995 mm, Width 1090 mm, Depth 1660 mm
External dimensions without hinges and door closure
Height 1995 mm, Width 1000 mm, Depth 1660 mm
Test chamber volume: approx. 600 liters
Cold / Heat operation -70 to 180°C
Climate operation 10 – 95°C
Humidity 10...98 % RH
Temperature change per unit of time
Cooling approx. 2.5 K/min
Heating approx. 4 K/min
3/N/PE AC 400V ±10% 50Hz
Rated power: 14 kW
Rated current: 25 A
Fuse, customer-supplied: 32 A slow-blow
Permissible test item weight
Total load of the grid supports 80 kg
Test chamber floor 80 kg, insert grid 40 kg
Weight: 800 kg
Refrigerant: R 404A/R 23
(Evaporator of the air conditioning system has been replaced)
For your safety as a buyer, here is the following information!
The following points are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.
Condition: used
Scope of supply: (See picture)
(Changes and errors in the technical data and information are subject to change!)
We will gladly answer any further questions you may have by phone.
Trust Seal
Dealers certified through Machineseeker

Success:
Your message has been sent.
Listing
Borken
1,034 km
BINDER KB 720 cooling incubator with P Plus package – EUCAR 5 battery test chamber, CO₂ extinguishin
BinderKB 720 Kühlinkubator
Call
Condition: used, BINDER
BINDER KB 720 Refrigerated Incubator with P Plus Package
– Battery Test Chamber EUCAR 5, CO₂ extinguishing system
Device Description:
For sale is a BINDER KB 720 (E6) refrigerated incubator, manufactured in 2022,
equipped with the extended safety and performance test package "P Plus".
This device is not a standard laboratory incubator, but a high-quality safety test chamber,
specifically designed for aging, performance, and safety testing of lithium-ion energy storage units.
Particular Added Value:
The device is designed to safely detect, monitor, and contain critical battery events
– up to EUCAR hazard level 5 (fire / flames, no explosion).
What can the device do specifically? (Point 2 – Performance & Application)
Conducting aging tests on lithium-ion cells
Performance tests (charge/discharge cycles under temperature)
Temperature endurance tests and temperature cycling tests
Tests of non-energized and cyclically energized cells
Reproducible, precise temperature control throughout the usable space
Safe execution of tests under realistic thermal conditions
Test environment for R&D, Automotive, E-Mobility, and energy storage technology
Suitable for:
Battery & cell manufacturers
Research and development laboratories
Testing laboratories & safety testing
Automotive / E-Mobility / Energy storage
The P Plus package turns the KB 720 into a genuine battery safety test chamber:
Integrated safety functions:
Automatic & manual CO₂ fire extinguishing system
Smoke detector with optical & acoustic alarm
Mechanical double door lock (secure containment)
Spark protection in the interior
Exhaust port with reversible overpressure valve
Connections for external inerting (e.g., nitrogen)
Emergency stop / manual activation of the extinguishing system
Feedthrough openings for charging and measuring cables
Result:
The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5,
where fire or flames may occur, without resulting in an explosion
or uncontrolled spread.
Not an abuse or destruction test device, but a safe,
Ibsdpfjziznfox Ab Tjd
standard-compliant test chamber for real operating and fault scenarios.
Technical Core Data:
Temperature range: – 10 °C to +100 °C
Interior volume: approx. 698 liters
Shelves: 4 × stainless steel
Max. load per shelf: 45 kg
Max. total load: 100 kg
Electrical Data:
Mains connection: 200–240 V AC
Frequency: 50 / 60 Hz
Phase: 1-phase
Power consumption: approx. 2.1 kW
Fuse rating: 16 A
Refrigerant: R134a
Protection class: IP 20
Dimensions & Weight:
External (W × H × D): approx. 1250 × 1950 × 900 mm
Internal (W × H × D): approx. 970 × 1250 × 576 mm
In short – why this device is special
genuine battery safety test chamber
suitable for EUCAR hazard level 5
integrated CO₂ extinguishing system
large chamber (≈700 l)
high market & resale attractiveness
Weight: approx. 285–300 kg
Documents & Downloads
Condition: used
Scope of delivery: (See image)
(Changes and errors in the technical data, specifications are subject to change!)
We will gladly answer any further questions you may have by phone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
ProX™ 800 3D production printer by 3D Systems – high-performance SLA printer
3D systemsProX 800
Call
Condition: used, 3D Systems
Type: ProX™ 800
ProX™ 800 3D production printer from 3D Systems – high-performance SLA printer
The system has been regularly maintained.
Operating hours: 18,700 (as of April 18, 2023)
Not in operation after April 18, 2023.
Note: Annual maintenance performed until decommissioning.
For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems.
This large-format SLA system is equipped with state-of-the-art print head technology and is suitable for highly precise components and industrial applications (e.g., automotive, aerospace, medical technology).
Additional features:
Automatic material replenishment system and pre-configured material supply module (fast module change, uninterrupted operation)
3D-Manage™ software for CAD model and print job control
Touchscreen control on the device (Print3D Pro™)
Status/signal light module, central user guidance
Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and locking mechanisms
Detailed maintenance and troubleshooting functions
Material container (MDM)
Technical data:
Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W)
Maximum build volume: approx. 650 × 750 × 550 mm
Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm
Weight: approx. 907 kg
Resolution: up to 0.00127 mm (laser spot size), 4000 DPI
Accuracy: ± 0.025–0.05 mm per inch
Ibsdpfxjzii Ums Ab Tsd
Materials: wide selection of Accura resins (durable, transparent, high-temperature resistant, biocompatible, etc.)
Electrical connection:
Power supply: 200–240 V AC
Frequency: 50/60 Hz
Phase: single-phase connection
Fuse: 30 A
Weight: approx. 1200 kg including material module
Condition: used
Scope of delivery: (See image)
(Subject to changes and errors in the technical data!)
We would be happy to answer any further questions you may have over the phone.
Success:
Your message has been sent.
Listing
Borken
1,034 km
DENIOS FBM base 421.27 fire protection container, temperature-control chamber with cooling and heati
DENIOSFBM base 421.27
Call
Condition: used, DENIOS
Fire protection shelving container / temperature-controlled safety cabinet
FBM base 421.27
Year of manufacture 2016 / approx. 5,000 kg
Cooling / 6 kW heating / video surveillance
For sale: a used DENIOS fire protection shelving container with integrated temperature control for storing suitable goods.
Technical data:
Manufacturer: DENIOS AG
Type according to project documentation: FBM base 421.27
Documentation: Special design
Year of manufacture: 2016
Weight: approx. 5,000 kg (operator's information)
Floor/shelf load: 1,250 kg/m² (manufacturer's basic data)
Spillage collection tray: approved by building authorities
Fire protection construction: REI90 according to documentation
Dimensions according to plant drawing:
Clear shelf width: approx. 2,700 mm
Clear shelf depth: approx. 2,000 mm
Overall height: approx. 3,973 mm
Further external dimensions available upon request.
Cooling technology:
Cooling concept / Year of manufacture 2016
Refrigerant: R134a / Filling quantity: 2.1 kg
Evaporator: Walter Roller HVS 406 EP
Fan: 230 V / 50–60 Hz / 135–192 W
Heating and electrical system:
Electric forced-air heater: 6 kW according to drawing
Mains connection: 3/N/PE 400 V / 50 Hz
Fuse: max. 25 A according to circuit diagram
Control voltage: 24 V DC
Switchgear cabinet: IP55
Equipment:
Double-leaf fire protection door
Grating floor and collection area
Temperature control with control panel
Refrigeration unit and electric heater
Pressure relief and lighting
ABUS camera with monitor
Switchgear cabinet and door monitoring
Note on cooling:
Designed to maintain a constant internal temperature with already temperature-controlled stored goods.
Not intended for the targeted cooling of warm goods.
Condition:
Used
Optical condition as per images.
Functionality not confirmed.
Scope of supply:
1 x DENIOS fire protection shelving container
with cooling, heating and video surveillance
and existing components as shown in the images.
Transport possible by arrangement.
Ibedpfx Abe Akmf Ee Tsd
Subject to changes, errors and prior sale.
We will gladly answer any questions by telephone.
Success:
Your message has been sent.
Listing
North Shields
474 km
3D printer Fuse SLS Package
FormlabsFuse 1+ 30W
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 183 h, total length: 685 mm, total height: 1,070 mm, total width: 645 mm, overall weight: 120 kg, input voltage: 230 V, laser power: 30 W, feed length X-axis: 165 mm, feed length Y-axis: 165 mm, feed length Z-axis: 300 mm, space requirement length: 1,495 mm, space requirement height: 1,870 mm, space requirement width: 1,255 mm, Formlabs Fuse 1+ 30W SLS Production Cell: 2 Printers, Fuse Sift with Industrial Vacuum, Fuse Blast with Polishing System and 4 Build Chambers, AM Efficiency CCP-2 3-in-1 post-processing station
Complete, ready-to-run SLS production system in great condition, sold as one package
What is included
- 2 x Formlabs Fuse 1+ 30W SLS 3D printers (230V), each with 2 build chambers (4 in total)
- 1 x Formlabs Fuse Sift powder recovery station (230V)
- 1 x Formlabs Industrial Vacuum 230V, supplied with the Sift [hose and accessories included]
- 1 x Formlabs Fuse Blast automated blasting station with the Fuse Blast Polishing System upgrade (cleans and polishes in one step)
- 1 x AM Efficiency CCP-2 automated 3-in-1 post-processing station designed for powder-bed 3D-printed parts
Hours and condition
- Printer 1: 1,369.68 print hours
- Printer 2: 183.6 print hours (very low)
- All units in great condition. Serial numbers available on request.
Why this setup
Four build chambers across two printers let you swap chambers and start a new print as soon as the last one finishes.
The Sift and vacuum handle powder recovery and the Blast handles finishing, so no further post-processing equipment is needed.
Key specification (per printer)
- Build volume: 165 x 165 x 300 mm
- Laser: ytterbium fibre, 30 W
- Layer thickness: 110 microns
- Materials supported by Formlabs: Nylon 11, Nylon 11 CF, Nylon 12, Nylon 12 GF, TPU 90A
- Power: 230V, dedicated circuit
Offers: offers on the full package are welcome. A separate sale of one printer may be considered for the right offer; please message to discuss.
Collection and delivery: not included in the price. The buyer arranges and pays for collection or pallet freight, including packing and loading. Each printer weighs about 120 kg without chamber or powder, so a forklift or tail-lift is needed. Allow access of about 125.5 x 149.5 x 187 cm per machine.
Viewing by appointment.
Ijdpfx Aj Adqx Tsb Tobd
We make it easier for you to find: "hh fuse"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Hh Fuse (1,517)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month






























































































































































































































































