Used Hedges Professional for sale (6,069)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Ljdpfxowc Rk Ee Afkehk Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Lhsdpfx Afjwc Afhsksk Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: good (used), Year of construction: 2001, For sale is a Felder KF-700 SP circular saw/milling machine with a cutting length of 3200 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical data: - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 103 mm - Max. saw blade diameter 315 mm - 4 milling speeds - Direction of rotation switch - 3 motors, each with 3 kW / 4.1 hp Lsdpfx Aozichyofkohk - Year of manufacture 2001 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combined machine Reference: R-B17MP

Condition: as good as new (ex-display), functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, cutting height (max.): 102 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: manual, Equipment: scorer, Demonstration machine with few operating hours, equipped with 5 special features; 5.5 kW, pre-ripper with its own motor, fine-adjustable circular saw fence, cutting width 800 mm with full table length, angle grid on the outrigger frame... Format sliding table, cutting length 2050 mm. Recommended retail price: 7,423,- EUR, plus VAT. Save 2,223 EUR! Ledpfxozi Dclj Afkjhk

Condition: like new (used), functionality: fully functional, For sale is a Felder CF7-41 S Professional 4-in-1 combination machine. The machine is currently used in our showroom and is therefore in like-new condition with full warranty. Technical data: - Jointer/planer width 410 mm - 4-knife cutterblock (reversible knife system) - Swiveling planer fence 90-45° - Dual folding jointer tables - Electric planer table adjustment with LED display - 2 feed speeds 6 + 12 m/min - Circular saw and router swiveling 90-45° - Sliding table 2500 mm - Extension table with miter gauge 2600 mm - Graduated scale index for miter gauge - Router fence 230 mm with multi-adjustment system - 4 router speeds 3500/6000/8000/10000 rpm - 3-motor, 7.5 HP (5.5 kW), 400 Volt - Automatic star-delta starter The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! For information, see the telephone number on our website. Lsdpfx Aozqtflefkehk Related terms: Combination machine, 4-in-1 combination machine, 5-in-1 combination machine, circular saw, planer, router Reference: R-D1618

Condition: excellent (used), Price per unit. For sale: a professional glue roller / glue applicator from Tünkers GmbH, designed for precise application of glue onto paper, cardboard, corrugated board, leather, fabrics, and other flat materials. This device is suitable for bookbinding shops, printing houses, production facilities, and anywhere where uniform glue distribution is required. The machine is equipped with a system of working rollers ensuring even glue application and adjustment of the amount of material dispensed. The robust, cast iron construction guarantees high durability and stable operation for many years. Technical specifications: Lsdpfsziwunjx Afkehk Manufacturer: Tünkers GmbH Type: Glue roller / glue applicator Machine number: 12/30274/22 Electric drive Rotation direction switch (left / stop / right) Adjustment of the amount of glue applied Two dispensing rollers Metal glue tank Adjustable work table Robust cast iron construction Made in Germany This device is ideal for working with glues used in bookbinding and packaging production. The visual condition corresponds to the photos.

Year of construction: 2021, condition: new, Approx. 9 professional espresso machines, LaMacatec, Capri II Black – New: Price ex works: only €1,500 (net)! Manufacturer: LaMacatec Type: Capri II Black Art. No.: LM 721 black Year of manufacture: 2021 – but still in original packaging! Groups: 2 Power: 3050 watts, 230V Boiler water: 11.5 liters Dimensions (W x H x D): 66 x 48 x 54 cm Steam: 1 Hot water: 1 Lhodpszbyhcefx Afkok Weight: 48 kg Automatic coffee dispensing via volume programming Steel body Low drip tray for “coffee-to-go” Stainless steel steam and water wand, thermosiphon system water circuit Copper boiler (Cu 99.5) with anti-oxidation treatment Former new price in 2021: €3,400, current price: €4,119 Condition: New, in original packaging Available: immediately Location: 88448 Attenweiler

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Lhjdpfx Aex A Ia Ijfkek

Condition: used, Year of construction: 2015, functionality: fully functional, power: 38 kW (51.67 HP), • Year of manufacture: 2015 • Max. trunk diameter: 1.5 m • Automatic, hydraulic belt tensioning • Automatic pre-cutter • Automatic board guiding system • Max. trunk length: 8 m • 8 hydraulic clamps • 3 trunk turning devices with left-right positioning Lhodpfx Aozl Stwsfksk • Automatic control • Automatic lifting belt conveyor for boards • Dust extraction system • 38 kW motor Price: 40,000 euros

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 753 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs Lhedpfx Afjxabc Dskjk - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 8x basic equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 200 mm weight 699 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Lhsdpfjxabfrjx Afksk The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 28 hole pattern / dimensions 2000 x 1000 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 949 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Item No.: 7D.1 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilling surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid Lhodpfexaayzex Afkek - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The welding tables are provided with a scale as standard. Plasma nitrided version : - Protection from rust/scratches/weld spatter adhesion - more corrosion resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - plasma nitrated extreme version with scale - Side panel + table top with diagonal grid - incl. 4x base equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 354 kg SIEGMUND authorized dealer - all items available! Product description Ljdexaacpjpfx Afkehk - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided 750 version with scale - Including 4x basic equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1374 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Extreme plasma nitrided version with scale - with diagonal grid on the table surface - Sidewall with diagonal grid - incl. 6x base equipment Lsdpfxjxabiws Afkohk

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t Lhodpfx Asibw Sxjfkjk - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. Lhjdpfsgvkfvox Afkok The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 499 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures. Ljdpfjxaab Esx Afkehk The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - incl. 6x base equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg Lhedpfx Asxaa Ekefksk dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore diameter 28 mm - Surface holes with a 100x100 mm grid - Rounded corners, edges, and holes - Side panel height 200 mm - Side panel hole spacing 50 mm - Surface scale included - Construction reinforced with ribs - Grid lines enable precise setups The welding tables are equipped with a scale as standard. Plasma nitrided finish: - Protection against rust, scratches, and weld spatter adhesion - More corrosion-resistant / higher load capacity Features: - 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm - Plasma nitrided finish (750) with scale - Includes 4x base feet

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Extreme plasma nitrided version with scale Lhjdpfsxab Rnjx Afkjk - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 1500 mm table width 1000 mm table height (lateral area) 100 mm Lhjdpfx Afjxaa Rtoksk weight 255 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 1500 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2000 mm Lhodpfx Afjxaa Hbjksk table width 1000 mm table height (lateral area) 100 mm weight 351 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 726 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm Lodjxab D Uspfx Afkohk - Plasma nitrided version Professional 750 with scale - Including 8x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description Lhedpfsxaablsx Afkok - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1517 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: Lhsdpsxaa Nvefx Afkjk - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment

Condition: used, functionality: fully functional, Year of construction: 2021, total height: 4,254 mm, total length: 15,500 mm, total width: 4,400 mm, load capacity: 1,600 kg, Professional crane system P 400 with chain hoist type SIXX 8AF-HF, load capacity: 1600 kg, lifting height 5 m. All technical specifications can be found in the technical documentation (see PDF). An advantage is that the crane can be easily extended thanks to its modular design. IMPORTANT: The crane system comes without travel drives!!!! Lhjdjxyhmcspfx Afkek