Used Hedges Professional for sale (5,919)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Dkodpfowc Rk Eox Afmop Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. Dkjdpfjwc Ri Iox Afmjp It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Dkedpfx Aswc Afhsfmep Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: good (used), functionality: fully functional, machine/vehicle number: Artikelnummer 1.006-201.0, working width: 850 mm, area performance: 3,150 m²/h, overall weight: 339 kg, input voltage: 24 V, battery voltage: 24 V, sweeping width: 750 mm, nominal power (apparent): 180 kVA, Ride-on cleaning machine in good condition. Fully operational. The Kärcher stand-on scrubber dryer B 95 RS impresses with high surface coverage in confined indoor spaces up to 6,000 square meters. This easily maneuverable unit effortlessly combines the characteristics of walk-behind and ride-on scrubber driers and delivers outstanding cleaning results. Key features include the 75 cm wide roller brush head with integrated sweeping function and the pivoting suction bar. Year of manufacture: 2011 Drive type: Battery Brush working width (mm): 750 Suction working width (mm): 850 Item number: 1.006-201.0 Power consumption (W): up to 2400 Dksdpfx Afeyg H Umomjp Battery capacity (Ah): 180 Battery run time (h): max. 2.5 Battery voltage (V): 24 Brush pressure (g/cm²): 215 Brush speed (rpm): 400 / 1000 EAN: 4054278884851 Weight incl. packaging (kg): 338.5 Maximum area performance (m²/h): 4500 Practical area performance (m²/h): 3150 Hour meter unfortunately defective. Brand new water bladder! + Wear parts replaced for €1,500. Shipping available at buyer’s expense. "This item is sold as is, with all warranties excluded."

Condition: new, Brugger HX16 Pro professional petrol wood chipper. This wood chipper is designed for professional use, and thanks to its high-quality construction and powerful driving force, even heavily branched material is no problem! Dkjdpfxemfnz Ej Afmsp With ease, it processes logs with diameters of up to 16 cm. It is powered by a strong 35 HP Rato gasoline engine and also features a No-Stress automatic system that prevents the engine from stalling under overload. The HX16 Pro comes with an "AL-KO" chassis and lighting system and can easily pass the TÜV inspection. It offers: Maximum log diameter: 16 cm Feed opening: 16.5 cm x 30 cm 35 HP Rato gasoline engine No-Stress Automatic Feed System Hydraulic feed Weight of 730 kg Price + VAT. Delivery available throughout Europe. -- Trailer-mounted chipper, wood chipper, wood shredder, branch chipper, branch shredder, professional chipper, wood shredding machine.

Condition: new, functionality: fully functional, The Brugger Grip 130 logging tongs with 3-ton rotator is the ideal solution for efficient logging and handling. logging and handling. These forwarding tongs offer an opening width of 130 cm and are Dkjdpfx Afsrbidvemep equipped with a powerful rotator that enables precise control and rotation. rotation. The versatile attachment option makes the Grip 130 extremely flexible. It can be easily attached to the rear attachment with three-point linkage or on the front loader with Eur linkage. This adaptability enables effective wood processing in various application areas. areas of application. - Opening width 130cm - 3T rotator can be rotated through 360 - Two double-acting circles are required - Suitable for three-point linkage KAT 2 + 3 - Suitable for Euro mount front loader The robust construction and high-quality workmanship guarantee durability and reliability reliability even under demanding conditions. The Brugger Grip 130 is the perfect choice for farmers, foresters and anyone who needs a reliable grapple for their woodwork. timber work.

Condition: new, power 4,0 (5,45) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 880 mm width 735 mm height 1 540 mm weight 70 kg material varnished steel discharge height 450 mm Dkodsb Nvn Topfx Afmsp suitable for branch diameter up to 50 mm

Condition: new, Year of construction: 2025, functionality: fully functional, repeat accuracy: 0.025 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 310 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 380 V, sheet thickness aluminum (max.): 300 mm, operating speed: 15,000 mm/s, pressure: 4,150 bar, warranty duration: 24 months, cutting speed: 15,000 mm/min, travel speed (max.): 20,000 mm/min, table load: 1,200 kg, year of last overhaul: 2025, product height (max.): 300 mm, Brand new Waterjet Cutting Machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The modern, fully professional X-JET waterjet cutter is designed for the most demanding customers. Thanks to the latest technologies and a rigid frame design, the machine guarantees excellent cutting quality, high precision, and long-term durability. 🔹 Key Features: Working area (3-axis): 2000 x 4000 mm Dkjdpfov Tmxujx Afmop X/Y traverse speed: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Max. table load: 1200 kg/m² Sealed linear motion units + servo drives Centralized electronic lubrication system Advanced CNC control + IGEMS CAD/CAM 2D/3D Optional 💥 5X Cutting Head: Taper angle compensation and bevel cutting up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond nozzle Automatic cutting height adjustment Z-axis and tool calibration 🧠 Intelligent Systems: 12 MP camera Automatic tool angle adjustment system Precision 5x cut calibration system 💦 High-pressure Pump: Max. working pressure: 4150 bar (60,000 psi) Constant pressure: 3792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touchscreen control ⚙️ Additional Equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with reverse osmosis Efficient sludge extractor – 170 l/min 📍 Made in Poland – local product with global capabilities. 💬 Feel free to contact us! We are happy to send you the full technical documentation and prepare a tailored offer. Custom machine dimensions and any configuration available on request. *(Images are for reference only; the offer refers to a 1.5x3m, 3-axis machine.)

Year of construction: 2023, condition: new, CNC PLASMA CUTTER, ProMax Professional series TECHNICAL SPECIFICATIONS Working width: 1500 mm Working length: 3000 mm Travel speed: up to 50 m/min KEY FEATURES DELTA servo drives X-axis carriage with dual rails Fast START – machine preparation for cutting in under 1 minute Djdpfsipht Rex Afmekp Planetary gearboxes Helical bevel gears, class 6 Touchscreen monitor with industrial computer Remote control Sectional extraction table with pneumatic actuators CS anti-collision system – protects the torch from collisions CLS central lubrication system Dual Y-axis support Laser pointer indicating the torch position SC system – safety system We also offer tables with different dimensions.

Condition: like new (used), SOUNDRAFT BROADWAY digitally controlled analogue mixing system Please check out our other listings as well. Dkedpfx Afeidaauemep

Year of construction: 2006, condition: good (used), Description Brand Fimar Model FME 4+4 ID 0069 Status Active Price 800 € + VAT Location Oradea (RO) Professional electric pizza, bread oven - rustic frontal lining - refractory cooking surface - heat insulation by rock wool lining - doors with Pirex inspection glass - pyrometers - interior lighting - 2 thermostats per chamber. POWER: 8,4 kW POWER SUPPLY: 230V/1N/50-60Hz - 230-400V/3-3N/50-60Hz CURRENT: 40A - 15A (230V/1N) (400V/3N) WORKING TEMPERATURE: 50 ÷ 500 °C COOKING CHAMBER DIMENSIONS: 610x610x140h (mm) x2 DIMENSIONS: 900x735x750h (mm) NET WEIGHT: 114 Kg GROSS WEIGHT: 139 Kg ExWorks. Price is negotiable. Dodpfed Hzayex Afmjkp Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Year of construction: 2021, condition: new, Air cleaner for room air purification for aerosols, such as viruses, bacteria, pollen, dusts. ISI AIR CLEANER - adjustable up to 1600 m³/h - 230 V - for large rooms up to 160 m³ Air output: adjustable up to 1600 m³/h Room size: suitable up to 160 m³ Power: 69 - 209 W Operating voltage: 230V 50/60Hz, 5m connection cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 - 48.1 db(A 1 m) Dimensions L/W/H in mm: L 550 / W 660 /H 2000 Colour: Lower part: RAL 7016, upper part RAL 7035 Weight: 130 kg Manu´facturer: ISI: Industrieprodukte Dkedpfx Afoh Rfcnsmop Scope of delivery: 1 piece ISI AIRCLEANER FT1 1 piece Fine dust filter, ISO 16080 ePM1-90% 1 piece HEPA filter H14, EN1822 Delivery: ex works Buchholz (Westerwald) excluding packaging, directly available The application: Currently, air purifiers are only becoming known because of the Corona pandemic. In principle, air purifiers are also recommended outside of a pandemic. They can significantly improve air quality. Even after the pandemic, there are seasonal pathogens circulating, such as influenza in the colder months. Asthmatics and allergy sufferers benefit from the filtration of pollen and other allergens year-round from an air purifier. How it works: The room air is sucked in at the bottom of the filter unit. In the pre-filter area, the air is freed from dust and larger particles. A subsequent, highly effective HEPA H14 filter system removes 99.995% of particles or aerosols, which may contain pathogens, from the air. Your advantages: - Highly efficient EC fan as standard - Adjustable speed and air output - Long service life and easy filter change - Low noise level - Separation efficiency of up to 99.95 - Quality Made in Germany

Condition: used, Year of construction: 2025, operating hours: 53 h, SUNWARD SWE20F Year of manufacture: 2025 Approx. 53 operating hours (may increase due to demonstrations) Operating weight: 1.94 t Engine: Yanmar 3-cylinder diesel engine 3TNE88 (Japan) Power: 13.4 kW / 2200 rpm Telescopic undercarriage, width adjustable from 99 to 132 cm Foldable dozer blade 2 travel speeds Articulated boom (allows work directly at walls and hedges) Long dipper stick, digging depth 238 cm Load holding valve Pump: Kayaba (Japan) 2 proportional joysticks LED work lights Radio with SD/USB 2x auxiliary hydraulic circuits (for grab/hammer/shear) Dkedpfxsyq A Scj Afmep 1x quick coupler hydraulic lines Genuine counterweight – unlike replica models, which only have sheet metal covers in the rear that cause instability 4 years remaining warranty according to manufacturer’s guidelines Includes MS01 30 cm and 50 cm digging buckets 1 m fixed ditch cleaning bucket Optional: 1 m hydraulic ditch cleaning bucket for an extra €500 net. All information subject to change/errors. Take advantage of this unique opportunity to acquire a true professional machine at an unbeatable price. Sunward is among the top 20 excavator manufacturers worldwide. Viewing possible at any time by appointment (please call to arrange). We accept trade-ins of your used machine. We are the official Sunward dealer for the following regions: Wittenberg district, Nordsachsen district, Leipzig district, Leipzig city, Elbe-Elster district, Oberspreewald-Lausitz district, Cottbus city, Spree-Neiße district, Oberhavel district, Barnim district, Märkisch-Oderland district, Frankfurt Oder city, Oder-Spree district, Dahme-Spreewald district, Teltow-Fläming district, Potsdam-Mittelmark district, Potsdam city, Brandenburg city, Havelland district, Berlin city.

Condition: new, working width: 2,300 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Dsdpfx Afjy E Ettsmskp Greentec RM 232 Hedge Mulcher / incl. MS08 Adapter Plate / NEW machine / in stock & immediately available Price: €14,590.00 net / €17,362.10 gross - Working width: 2,300 mm - Number of rotors: 4 units - Number of blades per rotor: 6 - Max. branch diameter: 4 cm - Working speed up to: 4 km/h - Required oil connections: 1 x double acting + 1 x free return (leakage oil) - Minimum oil flow: 50 l/min at 180 bar - Weight: 310 kg Delivery without hydraulic hoses and oil flow divider! Key advantages: - High capacity – Efficient maintenance of large hedgerows - Unique cutting system – Cuts and mulches branches in a single process - Very long lifespan – Built with high-strength steel components The RM 232 branch cutter is designed for professional use by municipalities, farmers, and contractors. The machine stands out with its large working width and high operating speed, ensuring impressive capacity. Branches are cut and shredded in one pass. The processed material is gently deposited beneath the unit, initiating natural decomposition. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a wide range of various Greentec products, all available for immediate delivery! Mr. Herden (phone ...) is at your service. On request, we are happy to provide you with a financing offer. We are official distribution and service partners for Westtech, OilQuick, Holp, Magni Telehandlers, DMS, Gierking GMT, Weber MT, Seppi M., JCB Construction Equipment, Mercedes-Benz, and Iveco. Additionally, with over 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We can supply the complete Seppi M. product range for you! Subject to errors and prior sale. = Further Information = Please contact Marius Herden for more details.

Condition: new, Year of construction: 2025, We are the official Sunward dealer for Berlin, the state of Brandenburg, and Eastern Saxony. Visit us and be impressed by our wide selection and outstanding quality. We always have around 20 excavators in stock. Mini Excavator Sunward SWE25UF – Zero Tail Swing New machine Operating weight: 2,650 kg Kubota 3-cylinder diesel engine D1105 Power: 15.4 kW/2400 rpm Cab with suspension seat, heating, and radio/USB Width: 1.50 m Two travel speeds with auto shift Articulated boom (work directly against walls and hedges) Long dipper arm Max. digging depth: 280 cm LED work lights Aux 1 proportional on joystick Aux 2 proportional on joystick 2x auxiliary hydraulic lines (for grab/hammer/shear) 5-year warranty Optional equipment: MS03 quick coupler Attachments such as buckets, hydraulic hammer, grab Powertilt available on request Dkodpfjyq A Rljx Afmep Matching trailers also in stock. All information subject to change. Take advantage of this unique opportunity to get a professional-grade machine at an unbeatable price. Sunward is among the world’s top 20 excavator manufacturers. Inspection possible at any time by appointment (please call ahead). Trade-in of your used machine possible. For quotations, please provide your complete address and email address! As a Sunward dealer, we are responsible for the following areas: Districts: Wittenberg, Nordsachsen, Leipzig, Leipzig (city), Elbe-Elster, Oberspreewald-Lausitz, Cottbus (city), Spree-Neiße, Oberhavel, Barnim, Märkisch-Oderland, Frankfurt Oder (city), Oder-Spree, Dahme-Spreewald, Teltow-Fläming, Potsdam-Mittelmark, Potsdam (city), Brandenburg (city), Havelland, Berlin (city).

Condition: new, We are the Official Sunward Dealer for Berlin, the state of Brandenburg, and eastern Saxony. Visit us and be impressed by our extensive selection and quality. We always have about 20 excavators in stock. Miniexcavator Sunward SWE17F New machine Operating weight: 1.78 t Engine: Yanmar 3-cylinder diesel engine 3TNV80-SSU Djdpjyq A Rrjfx Afmskp Power: 13.4 kW/2200 rpm Telescopic undercarriage, width adjustable from 99 cm to 1.36 m Folding dozer blade Two travel speeds with auto shift Boom swing (allows working directly alongside walls and hedges) LED working lights Radio with SD/USB AUX 1 proportional via joystick 5-year warranty Options: MS01 quick coupler Accessories such as buckets, hydraulic breaker, grapple, etc. Powertilt Matching trailers also available. All information subject to change. Take advantage of this unique opportunity to acquire a genuine professional machine at an unbeatable price. Sunward ranks among the 20 largest excavator manufacturers worldwide. Inspection possible at any time by appointment. We also accept trade-ins of your used machines. For offers, please provide your full address and e-mail address! We are the official Sunward dealer responsible for the following regions: LK Wittenberg, LK Nordsachsen, LK Leipzig, SK Leipzig, LK Elbe-Elster, LK Oberspreewald-Lausitz, SK Cottbus, LK Spree-Neiße, LK Oberhavel, LK Barnim, LK Märkisch-Oderland, SK Frankfurt Oder, LK Oder-Spree, LK Dahme-Spreewald, LK Teltow-Fläming, LK Potsdam-Mittelmark, SK Potsdam, SK Brandenburg, LK Havelland, SK Berlin.

Condition: new, We are the official Sunward dealer for Berlin, the state of Brandenburg, and Eastern Saxony. Visit us and be impressed by our large selection and outstanding quality. We always have around 20 excavators in stock. SUNWARD SWE20F Brand new machine Operating weight: 1.94 tons Engine: Yanmar 3-cylinder diesel engine 3TNE88 (Japan) Power: 13.4 kW/2200 rpm Telescopic undercarriage: 99-132 cm wide Foldable dozer blade 2 travel speeds Swing boom (allows working directly along walls and hedges) Long dipper stick, digging depth: 238 cm Load holding valve Pump: Kayaba (Japan) 2x proportional joystick control LED work lights Radio with SD/USB 2x auxiliary circuits (for grab/hammer/shear) 1x quick coupler hydraulic lines With genuine counterweight – unlike imitations, which only have sheet metal rear covers that can lead to machine tipping. 5-year warranty. Optional Equipment: MS01 mechanical quick coupler 30 cm bucket 50 cm bucket 1 m ditch cleaning bucket, rigid 1 m ditch cleaning bucket, hydraulic MS01 hydraulic quick coupler Powertilt and other attachments available on request. Matching trailers also in stock. All information provided without guarantee. Take advantage of this unique opportunity to acquire a genuine professional machine at an unbeatable price. Sunward is among the 20 largest excavator manufacturers worldwide. Dsdpfx Asyq A Rxofmskp Viewings possible at any time, by prior telephone arrangement. Trade-in of your used machine possible. For quotations, please provide your full address and email address! We are the Sunward dealer responsible for the following regions: Districts: Wittenberg, Nordsachsen, Leipzig (district and urban), Elbe-Elster, Oberspreewald-Lausitz, Cottbus (urban), Spree-Neiße, Oberhavel, Barnim, Märkisch-Oderland, Frankfurt Oder (urban), Oder-Spree, Dahme-Spreewald, Teltow-Fläming, Potsdam-Mittelmark, Potsdam (urban), Brandenburg (urban), Havelland, Berlin (urban).

Condition: excellent (used), power: 10 kW (13.60 HP), input voltage: 415 V, belt width: 407 mm, product height (max.): 85 mm, Lomax TD 407 Double Drum Spiral Freezer – To Be Converted into 2 x Compact Single-Drum Spiral Freezers We are offering a Lomax TD 407 spiral freezer, originally supplied as a double-drum configuration, which will be professionally split into two independent single-drum compact spiral freezers. Each machine will be supplied as a stand-alone compact spiral freezer, ideal for food producers looking for efficient freezing capacity with a smaller footprint. Conversion scope includes: Separation of the existing double-drum system into 2 individual single-drum spirals Independent drum, belt and tensioning system per machine Separate infeed and outfeed per unit Machines configured to operate independently Suitable for installation in existing production environments This conversion provides a cost-effective solution for customers requiring compact spiral freezing without investing in a brand-new system. 📍 Machine currently located in the UK 📦 Available as two separate machines following conversion 📩 Further technical details, layouts and pricing available on request Year of manufacture 2024 304 Stainless steal mesh belt Product gap 85m Tier pitch 140mm 1.62m Drum 24 Tiers on up drum 24 Tiers on down drum Belt Width 407mm Dsdpfstzmk Nex Afmjkp Effective Belt Width 337mm

Condition: repair required (used), Year of construction: 1997, machine/vehicle number: 26992, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 415 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 1,900 mm, cutting width (max.): 4,500 mm, saw blade diameter: 300 mm, height adjustment type: mechanical, rotational speed (max.): 4,750 rpm, STRIEBIG Econom II Vertical Panel Saw (1997) Fully operational Striebig Econom II vertical panel saw removed from our professional joinery workshop following replacement with a newer machine. The machine is fully functional and was in regular use until removal. It cuts accurately, the carriage runs smoothly and all operating functions work as intended. The saw is being sold as in need of repair because it does not have a functioning motor brake, meaning it no longer complies with our workshop's health and safety requirements. It should therefore be inspected and recommissioned by the purchaser before being returned to service. Specification Manufacturer: Striebig Model: Econom II Year: 1997 Machine No: 26992 Dkedpfx Afszimnksmsp 3 kW motor 415V, 3 Phase Maximum cutting height: 2200 mm Blade speed: 4750 rpm Dust extraction connection Viewing is welcome. Collection only from Finchampstead, Berkshire. Buyer responsible for loading and transport.

Condition: good (used), mileage: 596,889 km, power: 331 kW (450.03 HP), first registration: 01/2019, fuel type: diesel, tire size: 355/50R22,5, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, number of seats: 2, total length: 10,140 mm, total width: 2,550 mm, total height: 4,120 mm, loading space length: 7,770 mm, loading space width: 2,510 mm, loading space height: 2,990 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, seat heater, traction control, trailer coupling, - 2nd diesel tank - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Manual - Space Cab - Lane departure warning system - Fabric (seat upholstery) Number of axles: 3, Configuration: 6x2, Payload: 17,450 kg, Unladen weight: 9,550 kg, Gross weight: 27,000 kg, Total tank capacity: 1,050 liters, 2nd diesel tank, trailer coupling, unbraked trailer load: 750 kg, central axle trailer load (braked): 24,000 kg, kingpin diameter: 50 DIN, fifth wheel: fixed, number of differentials: 1, suspension type: full air suspension, cab type: Space Cab, cruise control, tachograph (control device), digital tachograph, air conditioning, stationary air conditioning, auxiliary heater, electric windows, electric mirrors, color: white, heated mirrors, lighting: halogen lamp, lane departure warning system, climate control, heated seats, engine power: 331 kW (444 hp), fuel: diesel, Euro 6, transmission type: AS-Tronic, transmission make: ZF, gears: 12, power steering, ABS, ASR, starter battery, rotation direction: 1x20, system type: ., central locking, number of seats: 2, seat arrangement: 1+1, seat upholstery: fabric, seat adjustment: manual Transmission Transmission: ZF, 12 gears, automatic Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tire size: 355/50R22.5; steering; left tire tread: 7 mm; right tire tread: 7 mm Axle 2: Tire size: 315/60R22.5; twin tires; left inner tread: 7 mm; left outer tread: 5 mm; right inner tread: 8 mm; right outer tread: 7 mm Axle 3: Tire size: 355/50R22.5; lift axle; steering; left tire tread: 6 mm; right tire tread: 5 mm Weights Curb weight: 9,550 kg Payload: 17,450 kg Gross vehicle weight: 27,000 kg Functional Loading platform height: 104 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €514 per month (default, 60 months); Please ask for further information and conditions Identification License plate: 01-BLX-1 Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offering includes all European makes, model years and price ranges. Why buy from Kleyn Trucks? Simply! • Large, fast-changing stock • Recognizable quality • Competitive prices • Professional business practice • We speak many languages • We understand our customers • Support for import and transport Dksdszkqyaspfx Afmjp • (Export) license plates arranged quickly • Expert technical services • The security of “recognizable quality” • And more… Please visit our website for special offers and the complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly for our European warranty package.

Condition: good (used), mileage: 835,866 km, power: 368 kW (500.34 HP), first registration: 12/2017, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 14, emission class: euro6, suspension: steel-air, total length: 6,050 mm, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, traction control, = Additional Options and Equipment = - Second diesel tank - Heated mirrors - Digital tachograph - Tachograph (control unit) - Fixed fifth wheel - Halogen lights - High-roof cab - Manual adjustment - Radio/cassette - Lane departure warning system - Fabric upholstery - Additional brake system = Remarks = Dkjdpezkf Dgofx Afmsp Number of axles: 2, Configuration: 4x2, Curb weight: 7,878 kg, Gross weight: 18,000 kg, Total tank capacity: 900 liters, Second diesel tank, Fifth wheel height: 107 cm, Fifth wheel: Fixed, Number of differential locks: 1, Suspension type: Air suspension, Cab type: High-roof, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, Colour: Red, Heated mirrors, Lighting type: Halogen, Lane departure warning, Air conditioning, Bluetooth, Engine power: 368 kW (493 Hp), Fuel: Diesel, Euro standard: 6, Transmission type: AS-Tronic, Transmission make: Scania, Number of gears: 14, Additional brake system, Retarder brand: Retarder, Power steering, ABS, ASR, Starter battery, Central locking, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Further Information = Technical Information Transmission: SCA, 14 gears, Automatic Axle 1: Tire size: 385/55R22.5; Steerable; Tire tread left: 7 mm; Tire tread right: 7 mm; Brakes: Disc brakes; Suspension: Leaf spring Axle 2: Tire size: 315/60R22.5; Twin tires; Tire tread left inner: 12 mm; Tire tread left outer: 12 mm; Tire tread right inner: 11 mm; Tire tread right outer: 12 mm; Brakes: Drum brakes; Suspension: Air suspension Weights Unladen weight: 7,878 kg Payload: 10,122 kg Gross vehicle weight: 18,000 kg Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European makes, year models, and price ranges. Why buy at Kleyn Trucks? Easy! • Large, rapidly changing selection • Recognisable quality • Good pricing • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) plates arranged quickly • Expert technical services • The assurance of 'recognisable quality' • And more.... Visit our website for special offers and the full inventory: Leasing via Kleyn Trucks is possible in most European countries! Calculate your leasing rate and send an inquiry via our website. Ask directly for our European warranty package.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,839 h, functionality: limited functionality, machine/vehicle number: NK64 MVL, power: 36.3 kW (49.35 HP), first registration: 10/2014, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, tire size: R16, fuel: diesel, wheelbase: 2,045 mm, driver cabin: day cab, emission class: euro5, The Nilfisk City Ranger 3500 is a powerful, compact road sweeper designed to deliver exceptional cleaning performance in urban environments. Ideal for local authorities, contractors, industrial sites, business parks, and large commercial premises, the City Ranger 3500 combines high-capacity sweeping with outstanding manoeuvrability, making it perfect for cleaning roads, car parks, pavements, and public spaces. Built for productivity, the City Ranger 3500 features a spacious hopper, efficient dust suppression system, and high-performance suction to collect dirt, leaves, litter, grit, and other debris with ease. Its articulated steering and compact design allow operators to work efficiently in confined areas while maintaining excellent visibility and operator comfort. Designed for year-round use, the City Ranger 3500 can also be fitted with a range of optional attachments, making it a versatile municipal machine capable of tackling multiple maintenance tasks throughout the seasons. Key Features High-performance road sweeping for urban and commercial environments Compact, articulated design for excellent manoeuvrability Large-capacity hopper for extended cleaning without frequent emptying Powerful suction and dust suppression for cleaner operation Comfortable, ergonomic operator cab with excellent all-round visibility Suitable for roads, footpaths, car parks, industrial estates, and public spaces Compatible with a range of seasonal attachments for year-round versatility Dkodpfezili Hex Afmop Whether you're maintaining busy town centres or large commercial facilities, the Nilfisk City Ranger 3500 delivers reliable performance, reduced operating costs, and professional cleaning results every time.

Condition: good (used), Very high throughput spiral freezer, was freezing over 3 tonnes per hour of fried Mc chicken burgers so very well maintained. 910mm wide belt, 28 tiers, 84mm product height. Professionally dismantled. 440 kw. Refrigeration plant available separately. Dedpfx Ashrm Ngjfmokp

Condition: good (used), mileage: 762,662 km, power: 355 kW (482.67 HP), first registration: 05/2019, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,100 mm, total width: 2,550 mm, total height: 3,920 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Manual - Lane departure warning system - Fabric upholstery - Super Space Cab = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 7,901 kg, Gross weight: 19,500 kg, Total fuel tank capacity: 845 liters, Fifth wheel height: 115 cm, Fifth wheel: Fixed, Number of differentials locks: 1, Suspension type: Air suspension, Cab type: Super Space Cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heating, Electric windows, Electric mirrors, GPS navigation, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Heated seats, Bluetooth, Engine power: 355 kW (476 Hp), Fuel type: Diesel, Emission standard: Euro 6, Gearbox model: AS-Tronic, Gearbox type: ZF, Gears: 12, Power steering, ABS, ASR, Starter battery, Central locking, Seat configuration: 1+1, Seat material: Fabric, Seat adjustment: Manual = Further Information = Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread left: 7 mm; Tire tread right: 9 mm; Suspension: Leaf spring Axle 2: Twin tires; Inner left tire tread: 13 mm; Outer left tire tread: 11 mm; Inner right tire tread: 9 mm; Outer right tire tread: 13 mm; Suspension: Air suspension Weights Unladen weight: 7,901 kg Payload: 11,599 kg Gross vehicle weight (GVW): 19,500 kg Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 1 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used commercial vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing assortment • Recognizable quality • Fair pricing • Professional transactions • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of “recognizable quality” Dedpoxx I H Hefx Afmekp • And more.... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask us directly about our European warranty package.

Condition: good (used), mileage: 899,174 km, power: 360 kW (489.46 HP), first registration: 12/2015, fuel type: diesel, tire size: 315/60R22,5, axle configuration: 8x2, wheelbase: 5,300 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 10,130 mm, total width: 2,550 mm, total height: 3,560 mm, loading space width: 2,550 mm, loading space height: 6,200 mm, Year of construction: 2015, Equipment: ABS, Bluetooth, air conditioning, crane, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Manual - PTO (power take-off) - Pump - Radio/cassette - Sleeper cab Dkedoy Hpibspfx Afmop - Lane departure warning system - Fabric - Additional brake system Number of axles: 4, Configuration: 8x2, Twin tires, Curb weight: 21,500 kg, Gross weight: 35,000 kg, Total fuel tank capacity: 500 liters, Trailer coupling, Kingpin diameter: 40 DIN, Chassis height: 8 cm, Fifth wheel: Fixed, Number of differentials: 1, Suspension type: Full air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Stand-alone air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Multicolor, Heated mirrors, Lighting type: Halogen lamp, Lane departure warning system, Climate control, Heated seats, Bluetooth, Flashing lights, Engine power: 360 kW (483 Hp), Fuel type: Diesel, Euro: 6, Transmission type: Opti-cruise, Gearbox: Traxon, Gears: 12, Additional brake system, Retarder brand: Scania, Power steering, ABS, ASR, PTO, PTO type: 1, Starter battery, Pump, Seating layout: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: HMF 6020-OK6, Year of crane: 2015, Crane capacity: 60,000, Maximum load: 2,640 kg at 16.9 m, Number of stabilizers: 4, CE certified, Control position: upper controls, Crane position: behind cab, telescopic: 6, Hydraulic auxiliary connection: none, Load hook Transmission Gearbox: TRA, 12 gears, automatic Axle configuration Tire size: 315/60R22.5 Brakes: disc brakes Suspension: air suspension Axle 1: steered; left tire tread: 9 mm; right tire tread: 6 mm Axle 2: steered; left tire tread: 10 mm; right tire tread: 10 mm Axle 3: twin wheels; left inner: 8 mm; left outer: 6 mm; right inner: 8 mm; right outer: 8 mm Axle 4: lift axle; steered; left: 9 mm; right: 6 mm Weights Unladen weight: 21,500 kg Payload: 13,500 kg Gross vehicle weight: 35,000 kg Functional Crane: HMF 6020-OK6, year 2015, behind the cab Platform height: 102 cm Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Identification Registration: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Professional technical services • The security of 'recognized quality' • And more... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most...