Used Hard Candy Line for sale (19,739)

Condition: used, Used Kosme edible oil PET bottle filling line with capacity 3000 bottles / hour and including blow moulding equipment. Made in 2012 and with only approximately 72 hours of use. Last used on sunflower oil and suitable for bottles sized 1l (3000 BPH, press cap, hot melt label), 2l (2800 BPH, press cap, hot melt label), 5l (2000 BPH, screw cap, adhesive label) and 10l (1000 BPH, screw cap, adhesive label). Line includes the following equipment: - Kosme KSB 2XL/4F blow moulder. Preform neck dimensions: smallest neck 28mm, largest neck 48mm, neck ring diameter 53mm, neck height 22mm, max length (under neck ring) 200mm. Preform bottle dimensions: max diameter 235mm, max height 430mm, base height 55mm. - Filler / capper model Weighblock 16/1440 6/540 P. - Labeller model Extra HM 4/720 Sa1 E1. - Packer model Acepack 2/4T. - Carton erector model Formapack H. - Carton sealing unit model Sealpack H. - Palletiser and stretch film wrapper. Dodpfx Adow U A Iljneku - Coders, handle applicators, elevators and conveyors. - (8) 25000 litre oil tanks, compressor, dryer, air tank, spare parts, auxiliary equipment and approximately 100,000 PET preforms.

Condition: good (used), Year of construction: 2005, URBAN Welding and Cleaning Line type CC 16/43-26/23 consisting of Welding Machine AKS 1600 and Polishing Machine SV 430. Dksdpfx Adjvyqbmjnju

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering Dsdpfx Aeu Rda Isdnjku - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit Rinser | Krones | Variojet | 2002 | Rotary Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer Labeller | Krones | SV 360-10-113 | 2002 | Rotary Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats Palletizer | Krones | Pressant Compact 1N | 2002 Stretch wrapper | Robopac | Rotoplat | 2002 Air conveyor | Krones | Airco S | 2002 | For blown PET bottles Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles Pack conveyor | Krones | Multico S | 2002 | For product packs Pallet conveyor | Krones | — | 2002 | For pallet transport Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Dkjdpexhf Hiofx Adnou

Condition: used, Year of construction: 1997, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Mazatrol, controller model: M-Plus, overall weight: 36,000 kg, tool weight: 2,200 g, CNC Horizontal Machining Centre with Palletech Table size 800 x 800 mm. Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. y-Axis 1100 mm. z-Axis 1000 mm. Table indexing 0,001°. Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Tool taper DIN 69871A-50. CNC control M-plus If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Djdpfx Asxd Aruednoku Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2017, total length: 2,800 mm, total width: 2,500 mm, total height: 2,500 mm, Empty weight: 4.105 kg Price: On request Brush texturing machine Boere Select 1300 DBBB X-line Width: 1,300 mm Brushes: 3 top Drilling height: max 150 mm Stepless feed Control: SYEL CE marking Total connection: 51 kW Weight: 4,105 kg - Max. working width [mm]: 1300 - Max. passage height [mm]: 150 - Year: 2017 - Documentation available: No Dkjdpfx Ajwwa Hfjdnju - CE marking present: Yes - Serial number: 17.05.7411 - Voltage [V]: 400 - Current consumption [A]: 103 - Power [kW]: 51.0 - Transport dimensions: 2800mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 4105kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Used Framax glass bottle filling line with capacity approximately 2900 bottles / hour made in 2017 and used for approximately 2500 hours. Equipment includes isobaric bottling machine model Modulblock RFC1-16/16/1-DPS/C and also depalletiser, packer (box former, 24 bottles/box). Previously used for craft beer and RTD (Ready To Drink) carbonated pre-mixed alcoholic drinks. Djdsw U A Ifepfx Adnjku Equipment list and additional photos available on request.

Condition: good (used), Compressed Air Line / Pressure Air Line Dkodpsvv Nvnofx Adnou made of aluminium The stated price is for all compressed air pipes together. Total: approx. 325 m of pipe Sale / delivery of partial quantities is possible!

Condition: used, Year of construction: 2015, operating hours: 19,200 h, functionality: fully functional, feed length X-axis: 3,000 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 40 mm, Equipment: ABS, Here we have a in line Biesse edgbander or as we call it a Lefty/Righty the machine can run panels Min 200 x 150 to max panel 2500 x 2500 Thickness min 8mm to max 40mm Dkjdexb Dk Hepfx Adnju The first machine comes with Pre milling , Gluing unit fed from PUR Nordson pump, Snip saw, Rough Milling, Profile milling ,Profile scrapping ,Flat Scrapping ,Buffing wheels and Grooving saw all of which are NC controlled apart from the Buffing wheels. The second machine also has Pre milling , Gluing unit fed from PUR Nordson pump, Snip saw, Rough Milling, Profile milling ,Profile scrapping ,Flat Scrapping ,Buffing wheels all of which are NC controlled apart from the Buffing wheels. On the line you have in feed rollers that pass the panels onto the fosters these fosters help square the panels up we have one Infront of the first machine and one Infront of the second machine. The price we are looking at is 45-50k

Condition: used, mileage: 248,000 km, power: 140 kW (190.35 HP), fuel type: diesel, first registration: 10/2017, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, airbag, cruise control, parking sensors, power assisted steering, trailer coupling, = Additional options and accessories = - Audio controls on steering wheel - Passenger airbag - Leaf spring suspension - Electric windows - Driver airbag - Rear doors - Rear parking sensors - Radio/CD player - Sun visor - Adjustable steering wheel - Central locking = Further information = Number of doors: 5 Cabin: double Number of cylinders: 4 Engine displacement: 1,968 cc Unladen weight: 1,723 kg Dkodpjxhgx Tsfx Adnou Damage: none Registration number: TX-062-F

Year of construction: 2010, condition: used, DFE Meincke is known for its expertise in industrial baking equipment, particularly in the area of biscuit forming machines and ovens. Here are some general details about these products: - Biscuit Forming Machines: - Designed for high-speed production of various types of biscuits. - Capable of producing different shapes and sizes with adjustable settings. - Often equipped with advanced technology to ensure consistent quality and minimal waste. - Can handle various dough types and formulations. - Ovens: - Specifically designed for baking biscuits at optimal temperatures and humidity levels. - Includes different types of ovens, such as convection, rotary, and tunnel ovens. - Feature energy-efficient designs and advanced control systems for better baking performance. - Can be integrated with forming machines for a complete production line. Peerless USA Bakery Mixing Machines: - Usage: Designed for mixing doughs and batters for various baked products such as bread, cakes, cookies, and pastries. - Types: They offer a variety of mixers, including planetary mixers, spiral mixers, and horizontal mixers, catering to different mixing needs. - Features: Common features may include variable speed settings, durable construction, and easy-to-clean designs. Some models might include programmable controls for consistent mixing results. - Applications: Peerless mixers are suitable for commercial bakeries, restaurants, and catering services, helping to improve efficiency and consistency in dough preparation. Line Capacity: 800 kg/h Dodpfx Asxazlxjdnsku Biscuit Types: Sandwich type biscuit with filling Make: DFE Meincke Model : Turbu 3 Convection Oven Year of manufacture: 2009 Serial Number for Oven : 112988 Voltage: 3 x 380 V Oven Baking surface type: Wire mesh Current Icp: 6KA Current In: 140 A Made in: Denmark Mixer Manufactire: Peerless Year of manufacture of Mixer : 2010 Condition: Excellent Serial Number of Mixer: 209110 Former Manufacture: DFE Meincke Former Year of Manufacture: 2010 Controls: Siemens Type of biscuit: Sandwich type with filling Former Made in: Denmark Construction of Line: Stainless steel Available: Immediately Required Containers: 6-7 40ft

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  Capacity: max. 1,500 bph (1,000 bph were actually run)  Bottled product: Beer   Included formats: 0.33l longneck, 0.5l NRW  Closure: Crown cap  Scope of delivery  Bottle washer | SEN | 1989 (overhauled and installed in 2020)  Isobaric filler block | Shandong Yuesheng | 2019   Rinsing positions: 14   Filling positions: 12   Capping positions: 5   With pre-evacuation   Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  Dry tunnel | Shandong Yuesheng | 2019  Labeler incl. laser printer   Collecting table   Dkodsxgfr Nopfx Adnsu

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: - Hopper and feed conveyor - Heat and Control fryer with deoiling belt Dsdpfx Adow U A E Ronjku - Flavour drum - Gas powered oil heater and oil pump. More information to follow.

Condition: used, Pie production line. Idle for 10 years; It was fully operational when put into storage. Requires servicing/reconditioning before use. Currently untested. Dkodpjw N Rz Nofx Adneu

Condition: used, Year of construction: 2001, Two lines available: Line 1 for hexagonal wire beads Dodpfxjxb U Ago Adnjku Line 2 for square wire beads One line consists of bead winder, bead extruder and cooling line, carousel and loader robot + coil winding.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Dedpfou Tg I Dex Adnjku Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: used, Year of construction: 2024, operating hours: 40 h, functionality: fully functional, type of input current: three-phase, CNC Machining Center Working range X-axis: 3,200 mm Working range Y-axis: 1,550 mm Working range Z-axis: 140 mm Year of manufacture: 2024 Milling motor 9 kW ER32/ER40 Speed: 1,000 / 24,000 rpm Spindle mount: ISO-BIESSE Tool changer magazine Multi-drill + 2 groove saws 7x vertical drills 8x horizontal drills Software: PWood Pegasus Import: DXF, jpg, png, eps, plt, etc. Cad-milling 3D simulation Nesting optimization software Vacuum pump Becker VTLF2.250 5.5 kW Omron safety light curtain Central automatic grease lubrication Extraction connection diameter: Ø150 Required suction capacity: 28m/m | 2900m3/h Weight Total power Dksdpfx Ajvmztmedneu

Year of construction: 2002, condition: used, functionality: fully functional, Schüco Isomat 4 for joining profile half-shells and for the thermal break of aluminium profiles. Can also be used for foil-coating aluminium profiles. The machine is in good condition for its age. Includes roller conveyors and the corresponding roller tools. An inspection is possible during our business hours by appointment. The Isomat is sold without any warranty, guarantee, or liability for material defects. Disassembly and transport must be organized and carried out by the buyer. Dksdpjw S A Sljfx Adnou

Condition: used, mileage: 18,753 km, power: 145 kW (197.14 HP), fuel type: diesel, gearing type: automatic, first registration: 02/2024, next inspection (TÜV): 02/2027, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Optional extras: Adaptive windscreen wiper system (Magic Vision Control) heated, dashboard in Artico man-made leather, direct current (DC) charging system, double sun visors (extendable, swivel), Driving Assistance package Plus, driving assistance system: trailer maneuvering assistant (Trailer Assist), luggage compartment partition (net), head-up display (front view display), interior trim: Oak wood, Black headlining, Energizing Air Control (Plus) cabin air filter, Acoustic comfort package, Charging cable for public charging points (8.0 m), Front/rear alloy wheels: 10x21 / 11x21 (AMG, 5 twin-spoke, RYA), Metallic paintwork, Multifunction telephony, MBUX Entertainment multimedia system, Night package Dksdpfx Aevnp Nxednju Further equipment: Airbag passenger side can be switched off, Airbag driver/passenger side, Acoustic ambient protection (exterior sound), Interior ambience package, Drive type: all-wheel drive, AC charging system, Equipment package: Advanced, Electr. adjustable and heatable, both, DAB tuner (digital radio reception), AMG Line design and equipment line, 100 kW electric motor (hybrid drive), electronic traction system (ETS), driving assistance system: active brake assist, driving assistance system: active lane departure warning system, driving assistance system: downhill speed regulation, driving assistance system: Speed limit assistant, Driving assistance system: traffic information system Live Traffic, Driving assistance system: traffic sign recognition, Vehicle setup (online services / apps), Vehicle monitoring (vehicle location system), Electric windows front + rear, Luggage compartment cover / roller blind, Tailgate with automatic opening and closing system, Rear lights LED, Hybrid 245 kW (engine 2.0 Ltr. - 145 kW diesel), Infotainment system: Remote & Charging Services Plus, Infotainment system: Remote Services Premium, Isofix mounts for child seat on rear seat, Body: 5-door, Keyless Go start system, Knee airbag driver's side, Instrument cluster with variable display (Widescreen Cockpit), Communication module (LTE) preparation Mercedes me connect, Head airbag system (windowbag), Charging cable for public charging points, Charging cable with earthed plug, Front lumbar supports, electr. adjustable, Mercedes-Benz emergency call system, Model upgrade with code, Multibeam LED, PRE-SAFE system, Wheelbase 2995 mm, Tire repair kit (Tirefit), Tire pressure monitoring system, Reversing camera, Split/folding rear seat backrest, Low-emission in accordance with Euro 6d emissions standard, Front side airbag (sidebag), Darkened rear side windows and rear window, Service system: Extended navigation services, Service system: MBUX Augmented Reality for navigation, Service system: MBUX Navigation Premium, Heated front seats, Smartphone integrated, Mirror package, Voice control system extended functions (MBUX), Standard interior, Underride guard (chrome), USB ports, Pre-fitting car sharing, Pre-fitting navigation services, Pre-fitting remote & navigation services

Condition: used, Year of construction: 1962, Banbury Kneader / Mixer #3 with peripheral equipment Documented modifications / upgrades: Year Modification / Upgrade 1962 Gearbox upgrade Kneader III 1973 Carbon black weighing & dosing system for Kneader III 1981 Exhaust extraction system for Kneader III 1985 Batch-Off machine for Kneader 3 1985 Temperature control unit for Kneader 3 1995 DC motor 1500 HP, 1700 V, 1678 A 1996 Upgrade to KSBI-L270 Kneader III 2007 Hose scale for Kneader #3 2008 Vibration measurement system Mixer III Dkjdpexb T T Rofx Adneu 2008 Column-mounted slewing crane for bale handling Mixer III 2009 Vacuum hoist system Kneader III 2010 CMS system for Mixer III 2013 Long-strip cutting device for Kneader III 2014 Slab feeder for Kneader III 2014 Overnose conveyor Kneader III 2014 2 × floor scales for Kneader III 2014 New control system for Kneader III 2014 Cooling register MUAFAN 1+2 – cooling line mill Kneader 2+3 2015 Monitoring system (Kneaders I–III) for CMS Kneader III 2017 Mixer body replacement Kneader III 2023 Rubber kneader III KSBI-L270 Control system: New control system 2014, CMS system 2010, DC Drive / Automax, PLC Batch-Off & Conveyor, AC Drives documented Maintenance / condition: Regular modernizations and upgrades documented 1962–2023 Accessories / options: Batch-Off machine, slab feeder, put-up conveyor, long-strip cutter, floor scales, bale handling crane, vacuum hoist system, carbon black silos & weighing system, extruder, roller die, roller head with conveyor, cooling systems (dip tank, cooling line, laydown), control systems (DC Drive, AC Drive, Automax, PLC)

Condition: used, Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering reliability in the long term, which minimises maintenance costs. The use of the latest technologies provide total control over the pressure applied by the stretch film over the product, the pre-stretch ratio and the packaging overall holding force. The Uniwrap 200 AE includes a top-sheet applicator, programmable to client's requirements. Condition: The entire stretch wrapping line is still assembled, in really good condition, ready for immediate operation and can be inspected in operation on site. Dodpfou Tg Nnex Adneku Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2012, Year Modification / Upgrade 2012 Installation of Quadruplex Extrusion Line No. 02 for single tread production 2012 Foundation work for Quadruplex Extruder No. 02 2012 Installation of induction heating insert and die on Quadruplex Extruder No. 02 2013 Expansion of extrusion tooling for tread and sidewall production 2014 Two Siemens compact asynchronous motors 2017 New extruder screw (150 mm base size) for Quadruplex Extruder No. 2 2019 Closed-loop system upgrade (extended) 2021 Closed-loop system upgrade (extended) 2022 New 200 mm screw for Troester extruders Control system: Modern control and visualization units (control desks, operator panels) Dkjdpfx Asxb Uimsdnju Technical data: • Extruder screws up to 200 mm (2022) • Base screw 150 mm (2017) • Siemens asynchronous motors (2014) Maintenance / condition: Regularly modernized and upgraded from 2012–2022 Accessories / options: Conveyor systems, heating and cooling units, monitoring and measuring stations, winding equipment

Condition: used, Year of construction: 2011, OMET 2M2B 400T Automatic Coil Feeder Press Line; Including: Omet Press; Asservimenti Resse SMC70 Decoiler; Asservimenti Resse AP6 1150 C Straightener; Asservimenti Resse CRH 1150C Electronic Feeder Dksdpfx Aew U N R Todnou

Condition: used, Wagner Cavity Enameling Line Gema with Opti Center Dedpfsw U Ra Nex Adnjku

Condition: used, Esimec Automatic 3 Presses Line Dkodpfxew U Rcko Adnsu