Used Hand Thread Drill for sale (14,441)

Condition: reconditioned (used), Year of construction: 2003, Drilling machine for Newel Posts. Ncodpfx Asg U U D Reiyeu Without adjusting the machine your can drill 2 Newel Posts for mounting one Newel Post up on the other with dowel connection. The renovation of the machine is still going on.

Condition: good (used), Asquith radial drilling machine offered. Type: ODI X-travel: 910 mm Z-travel: 640 mm Stroke spindle: 350 mm Diameter spindle: 65 mm Speed max: 1550 RPM Table: 510 x 1000 mm Bed: 1280 x 795 mm Dimensions: 240x125x293 cm LxWxH Ncjdpfx Aeh U Iaxsiyju For more information call us or send an e-mail.

Condition: good (used), PK Dacice drilling machine Type: VS20A Bed: 355 x 280 mm Speed max: 2800 RPM Ncjdpfx Aemw Uffoiyju Spindle: 40 mm Coolant pump Machine height: 197 cm

Condition: good (used), Year of construction: 1983, Pitch 32 mm Nodpfx Aiezfqk Ijyjcu Motor output 1,8 kW Weight 240 kg Number of boring spindles 21 St.

Condition: used, mileage: 222,273 km, power: 150 kW (203.94 HP), first registration: 02/2018, fuel type: diesel, overall weight: 3,000 kg, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * 1st owner * Full service history (serviced exclusively by authorized workshops) * New engine including particulate filter installed at 98,753 km by VW authorized workshop; invoice for €11,500 available * 204 HP engine with 7-speed DSG automatic transmission * 3,000 kg gross vehicle weight * Reinforced suspension and damping * Long wheelbase version * LED headlights * Air conditioning * Multifunction steering wheel * Rear-view camera * Parking sensors * Tow bar * Soft-close assist for tailgate and sliding door * New TÜV certificate (roadworthiness inspection) Special equipment: Ncsdpsx Nz N Sofx Aiysu Audio system Composition Media (Radio/CD player, MP3 playback), Light & Vision package, Rubber flooring in load/passenger compartment, Electrical Package 1, Driver assistance system: Rear parking assist with reversing camera, Chassis: Reinforced suspension and damping (for rough road conditions), Freewheel coupling for dual-clutch gearbox, 4 folding remote keys, Rear LED lights, red, High partition wall in cargo area without window, Truck registration, Mobile online services App-Connect, Mobile phone interface Comfort, Multifunction display Plus, Multimedia interface 2 x USB (iPhone / iPod) with AUX-IN, Heated windscreen washer nozzles and washer fluid level indicator, Seat covering/upholstery: "Simora" fabric, Cabin seats: Double passenger seat with storage compartment, Driver’s seat height adjustable, Driver’s seat with lumbar support, Steel wheels 7x17, Central locking with remote control and interior operation, Permissible gross weight 3.00 t, Soft-close assist for tailgate, Soft-close assist for right sliding door Additional equipment: Sliding door guide rail cover, Passenger airbag deactivatable, Driver and passenger airbags, Left exterior mirror aspherical, Right exterior mirror convex, Rubber flooring in cab, Driver assistance system: Brake Assist (HBA), Driver assistance system: Multi-collision brake, 17" chassis, Tinted laminated windshield, Lockable glove compartment, Tailgate without glazing, Interior pollen filter, Body/build: standard panel van, Body type: standard roof, Fuel tank: 70 liters, Steering column (steering wheel) adjustable, Engine 2.0 l – 150 kW TDI, Non-smoker package, Wheelbase 3,400 mm, Tire repair kit, Low emissions according to Euro 6, Right side loading/passenger compartment sliding door, Start/stop engine system, Front door storage compartments, Half-height hard fiber paneling in load/passenger compartment, Heat-insulating glazing.

Condition: used, mileage: 186,348 km, power: 132 kW (179.47 HP), first registration: 10/2015, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 07/2027, color: red, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), * 1st owner * Full service history * Timing belt already replaced at 182,010 km (06/2025) * Last inspection at 181,352 km (05/2025) * TÜV valid until 07/2027 * Long version * Air conditioning * Cruise control * Parking sensors * Double armrests * Sliding doors on both sides * 179 hp engine with 6-speed gearbox * Tow bar Ncedsx Nz N Ejpfx Aiyou

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Colour: White Empty weight: 1.240 kg Njdpjzavvgofx Aiyscu - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety feature: - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, total width: 600 mm, total length: 700 mm, total height: 700 mm, - Documentation available: No - CE certificate present: No - Main motor power [kW]: 0.75 - Drills included: Yes - Tool wrenches included: Yes - Voltage [V]: 400 - Power [kW]: 0.8 - Transport dimensions: 700mm x 600mm x 700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ncodow N Nq Aspfx Aiysu Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 69,990 km, power: 77 kW (104.69 HP), fuel type: diesel, gearing type: mechanical, first registration: 01/2022, emission class: euro6, color: white, number of seats: 9, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Chat with us now via WhatsApp: Contact our sales consultant quickly and easily. with leather interior - ID 3378 ----Optional extras: * 12 to 64 months warranty (valid throughout the EU) * New inspection * New TÜV (German vehicle inspection) & emissions test * Nationwide delivery * Financing available, even without a down payment * Spring offer: Upon request and for an additional charge of only €999, increase the trailer load capacity to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * German vehicle * Immediately ready for use * 1st owner * Euro 6 standard * Accident-free Njdpfx Aijzbzdroyjcu * 9-seater * Comfortable seats * Cruise control * Air conditioning * Rear-view camera * Bluetooth multimedia system * Trend equipment package * Style package Special equipment: Audio system 21: Digital radio reception (DAB/DAB+) with 8" multifunctional display, rear window wiper, configuration with specific central locking, visibility package 1, step under the left sliding door, heat-protective glazing for the cargo/passenger compartment, medium tint. Additional equipment: Airbag on passenger side, airbag on driver side, active cornering lights, traction control system (ASR), exterior mirrors electrically adjustable and heated, turn signal in exterior mirror, floor covering: rubber in the cargo/passenger compartment (fully), on-board computer, door entry lights, electronic traction control, driving assistance system: hill start assist, driving assistance system: emergency braking assistant, driving assistance system: crosswind assist, windows in cargo/passenger compartment: - fixed, 2nd row, left, windows in cargo/passenger compartment: - fixed, 3rd row, left, windows in cargo/passenger compartment: - fixed, 3rd row, right, generator 240 A, grab handle B-pillar, grab handles in the front, lockable glove compartment, rear wing doors with glazing, body/structure: standard station wagon, body variant: normal roof, radiator grille black, steering column (steering wheel) height and longitudinally adjustable, model refinement, engine 2.0 L - 77 kW TDCi CAT, parking pilot system front and rear, radio preparation, 4 speakers, wheelbase 2933 mm, tire pressure monitoring system, spare wheel in driving condition, rear seat package 6 (single seat and double seat, 2nd row and 3rd row), low emission according to emission standard Euro 6d, windshield wiper with intermittent operation, adjustable, headlights H4, sliding door cargo/passenger compartment right, mud flaps front and rear, side protection strips, seat package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, steel rims 6.5x16, start/stop system, 12V socket in the cargo/passenger compartment, bumpers partially painted, style color package, daytime running lights LED, Trend, lashing eyes (2), auxiliary heating electric, second key with folding remote control. ----Do you want to lease or finance? We offer attractive deals - even without a down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 AM - 6:00 PM Sat: 9:00 AM - 2:00 PM ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Veh

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Nodpfexwaz Hex Aiyocu

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: Nedjxnlflspfx Aiyecu - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, Technical details: bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg Nsdpfx Aozgaiisiyjcu transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: used, Year of construction: 2008, operating hours: 13,741 h, 2008 | Delmag RH 18 on Sennebogen SR 25T | Used Drill | 13741 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 244000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Nedpfx Aezd E Ireiyecu 👷‍♂️ Inspected by an independent expert 73 inspection points 71 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good operating Drill , with a Good running Cat engine , 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40183 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Threading jaws R 2 to GA 4 Threading jaws for Georg Fischer GA 4 threading machine as new GF Art. 012209 Nodpfeivzckox Aiyecu

Condition: used, mileage: 194,144 km, power: 96 kW (130.52 HP), first registration: 10/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, soot filter, * !!!!! Engine damage !!!! * Engine runs rough and smokes * 2nd owner * Automatic climate control * Reversing camera * Electric side mirrors * 3 seats * L3H2 Ncsdeyhtptopfx Aiysu Special features: Passenger airbag, electrically adjustable, heated, and folding exterior mirrors, rear doors (opening angle 270 degrees), automatic climate control, USB port, video parking assist system Additional equipment: Driver's airbag, exterior mirrors with wide-angle, integrated indicator lights in colored exterior mirrors, brake assist, body/chassis: large box van standard, padded headrests, 90-liter fuel tank, cargo partition, height-adjustable steering column (steering wheel), engine 2.0 L - 96 kW Blue-HDI FAP CAT, wheelbase 4,035 mm, spare wheel with standard tire, low emissions according to Euro 6, sliding door in cargo/passenger area on the right, SCR system (AdBlue technology), side protection strips, seat cover/upholstery: fabric, cab seats: double passenger seat, cab seats: driver's seat with lumbar support, start/stop system, permitted gross vehicle weight 3.5 t

Condition: used, machine/vehicle number: 005836, X axis working area: 3000 mm Y axis working area: 1000 mm Main Electrospindle power: 3.5 KW Njdpfx Aswuckujiyecu Number of controlled axes: 3 axes Total number of drilling spindles: 82

Condition: used, functionality: fully functional, The ALZMETALL AX 2/S is the more compact sister machine to the ALZSTAR series. It is a professional, extremely precise bench or pillar drill (depending on the base), primarily used in precision engineering, training workshops, laboratories, and demanding workshops. While the ALZSTAR 30/S is designed for "rough" work with a drilling diameter of up to 30 mm, the AX 2/S focuses on compactness and maneuverability for smaller drilling diameters, without compromising the typical Alzmetall stability. Technical data at a glance Feature | Value / Specification ----- | ----- Drilling capacity (in steel St 60) | 23 mm Thread cutting (optional) | max. M 14 (steel) / M 16 (cast iron) Spindle mount | MK 2 (short spindle) Spindle stroke (Z-axis) | 100 mm Overhang | 250 mm Column diameter | 90 mm Njdpfozdy Rzsx Aiyecu Machine table (support) | 370 x 300 mm Feed | Manual Motor power | 0.6 / 0.95 kW Spindle speed (stepless) | Variant 1: 125 – 2,400 rpm | Variant 2: 225 – 4,300 rpm Machine weight | approx. 180 kg (net machine weight) Key features & equipment details Mechanically stepless drive: As with the larger sister model, the speed is adjusted steplessly and conveniently during operation via a mechanical control wheel (variator). Digital display: The spindle speed is displayed digitally on a clearly visible display on the head of the machine as standard. Compact size: With a net weight of approximately 180 kg, it is significantly lighter than the ALZSTAR 30/S (approx. 260 kg) and can still be transported or moved relatively easily if required. Safety features: A lockable main switch with motor protection, a locking emergency stop button, and the electrically protected spindle guard are also standard features. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: used, Used machine Equipment and technical data: Precision drilling machine with AC power supply Stepless electronic speed control from 400 to 4500 rpm Drilling capacity in steel and grey cast iron: 13/15 mm Drilling depth: 60 mm Drilling depth indicator with mm scale via quickly adjustable stop ring Drill head height adjustment smoothly regulated by gas pressure spring Motor: 0.5 kW Availability: short-term Nsdpfx Aioy Ih Tnsyjcu Location: 63934 Röllbach

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: Ncedpfx Aioy Tczkjyou - Number of drilling spindles: 21 pcs. with 32 mm spacing - Drilling direction: Bottom and end face - Swivel range: 0-90 degrees, adjustable by handwheel - Pneumatic material clamps: 3 pcs. - Passage: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Diameter of dust extraction: 120 mm - Includes a variety of stops (see pictures) Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1997, Used machine Year of construction: 1997 Condition: workshop checked Fitting drilling head Drilling unit 3/4 spindles Ncsdpfjw I Ugtsx Aiyju Clamping cylinder 2 pieces Motor power 0.8 kW Connection 400/50 Volt / Hz Machine dimensions Length 950 mm width 650 mm Height 700 mm Weight 80 kg Availability: short term Location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Ncsdpfxjw I Uy Tj Aiyou Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: used, Used machine Equipment and technical data: Drilling unit consisting of a drilling motor with a chuck for threaded drills, with the possibility of accommodating 6 drills according to the drilling pattern, including 5 for a hole spacing of 32 mm and 1 offset drill with a spacing of 32 mm to the hole row, e.g., for Häfele Varianta. Includes roller conveyors on the left and right sides of the drilling machine. Availability: short notice Ncsdpey Si Axjfx Aiyeu Location: 63934 Röllbach

Condition: excellent (used), Column drill press, bench drill press, drilling machine (used) Manufacturer: MAXION Type: BS 25 Drilling capacity in ST 37 steel: 30 mm Spindle taper: MK 3 Spindle speeds: 80 – 1400 rpm Spindle stroke: 120 mm Overhang: 260 mm Table size: 495 x 365 mm Column diameter: 120 mm Motor: 400 V, 0.7 / 1.3 kW Space requirement: approx. width 510 mm, depth 900 mm, height 1850 mm Nodozfpk Tjpfx Aiyjcu Weight: approx. 350 kg The machine is in very good condition, runs smoothly, and is ready for immediate use. Forklift available for loading onto a truck. Affordable shipping possible. Location of the machine: 48477 Hörstel

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Njdpfxsv Tqdbj Aiyscu Roller shaft diameter 54 mm Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Max.length workpiece rolled in plunge-feed 175 mm Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Maximum noise level 80 db Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Machine width 1450 mm Standard machine depth 900 mm Total machine height 1800 mm

Condition: used, Year of construction: 2009, machine/vehicle number: PRJ 040485, functionality: fully functional, rotational speed (max.): 4,300 rpm, rotational speed (min.): 225 rpm, overall weight: 260 kg, Equipment: CE marking, The ALZMETALL ALZSTAR 30/S is a robust, precise, and durable pillar drilling machine, particularly suitable for craft businesses, training workshops, and industrial workshops. It belongs to Alzmetall's more price-sensitive "Start-Up" series but still offers the manufacturer's accustomed industrial quality. Here are the most important technical data and features at a glance: Technical Data Feature Value / Specification Drilling capacity (in steel St 60) 30 mm Drilling capacity (in cast iron GG 20) 30 mm Thread cutting max. M 16 (steel) / M 20 (cast iron) Spindle mount MK 3 (short spindle) Spindle stroke (Z-axis) 140 mm Overhang 293 mm Column diameter 115 mm Machine table (support surface) 515 x 360 mm (with T-slots) Njdpfxezdqdls Aiyjcu Distance spindle - table min. 132 mm / max. 724 mm Feed By hand Motor power 1.0 / 1.6 kW Spindle speed (stepless) Depending on the option: 225 – 4,300 rpm or 100 – 1,800 rpm Machine weight approx. 260 kg Standard equipment & highlights Stepless speed adjustment: The speed can be adjusted steplessly using a mechanical variator, allowing for optimal adaptation to the respective material and drill diameter. Digital speed display: The current spindle speed is displayed clearly on the front of the machine. Thread cutting device: An integrated reversing switch enables quick switching between right-hand and left-hand rotation. Safety: The machine is equipped as standard with a locking mushroom-head push button for EMERGENCY STOP, a motor protection switch, and an electrically secured spindle guard. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.