Radial drilling machine

Kolb Radialbohrmaschine

Condition: ready for operation (used), functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Manufacturer: H. Vuillot Dkjdpfxjwcqpno Ab Ajw Sheet capacity: 3000 x 27 mm Top roll diameter: Ø445 mm Bottom roll diameter: Ø330 mm Year: 1972

Year of construction: 1981, condition: used, machine/vehicle number: 77-8101, Lg-Nr. 01501, Technical specifications: - Drilling capacity in steel 28 mm - Thread cutting device - Drill spindle mount MK 3 - Drill spindle stroke 160 mm - Table dimensions approx. 750 x 500 mm - Overhang up to approx. 620 mm - Vertical stroke of the arm 600 mm - Column diameter 250 mm - Spindle speeds in 12 steps 80 - 2800 rpm - 3 feed rates 0.1 + 0.15 + 0.25 mm/rev - Drill spindle drive 400 V / 5.5 kW Dkedpob Ennkefx Ab Ajw - Coolant system - Space required approx. W 1100 x H 1550 - 2150 x D 950 mm - Weight approx. 1200 kg - Operating manual

Condition: used, bore capacity in steel (diameter) 40 mm throat 300 mm Dkjdpfovvnlnjx Ab Asw bore stroke 170 mm 4 speeds 70 - 1400 U/min table-size 600 x 450 mm total power requirement 3,0 kW weight 350 kg dimensions 1200 x 800 x 2150 mm Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop - Drill chuck

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m Dedpex U Ectsfx Ab Aokw

Condition: new, pressure 80 t stroke 400 mm table surface area 920 x 540 mm Motor output 2,2 kW liter capacity 9,0 l dayligth 800 mm tank capacity 31 l daylight between the columns 920 x 300 mm weight of the machine ca. 0,725 t dimensions of the machine ca. 1,45 x 0,85 x 2,45 m Hand and Motor operated. Dsdovu E T Hepfx Ab Aekw Side-sliding cylinder.

Condition: good (used), Manufacturer: MAS Type: VR 4 Reach: 1000mm Dksdpfeh Eigbsx Ab Aow Without table!

Condition: new, bore capacity in steel (diameter) 28 mm throat 320 mm bore stroke 150 mm spindle taper MT 3 MK table: 500 x 350 mm column diameter 105 mm turning speeds 75 - 3010 U/min total power requirement 0,9 / 1,2 kW weight of the machine ca. 235 kg. range L-W-H 1740 x 670 x 850 mm Dkedpfxsfhk Ufj Ab Aew

Condition: new, pressure 30 t stroke 150 mm table surface area 185 mm Breite column travel between the guideways 530 mm weight of the machine ca. 162 kg Dsdpexabg Nsfx Ab Askw dimensions of the machine ca. 800 x 700 x 1805 mm

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill MAS - VO 32 MACH-ID 9618 Make: MAS Type: VO 32 Year: 1999 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Dsdpfsy Rznwsx Ab Aekw Speeds / ranges: 4500Rpm Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Dodpfxou T Ty Hj Ab Ajkw Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.