Used Hand Hole Punch for sale (23,385)

Condition: good (used), Hand punch, hand punch, eccentric punch, hand lever punch, spindle punch -Stamp holder: Ø 22 mm -Die holder: Ø 40 mm Nwodpfsb A Rmbox Aa Ejr -Dimensions: 310/400/H50 mm -Weight: 26 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: X0006, Offer 25364 Technical Data: - Punching force: 200 kN - Max. sheet thickness: 6 mm - Max. punching diameter: 90 mm - Stroke: 42 mm - Throat depth: 400 mm - Maximum strokes per minute: 200 spm - Installation height: mm - Drive: 400 V / 3 kW - Required space approx.: W 1000 x H 1650 x D 1200 mm - Weight approx.: 1400 kg - Including: positioning table, quick-change punch device, foot switch, emergency stop switch, various punches and dies Nwodpfx Aox I Nc Roa Eor The machine can be inspected by appointment at the 63322 Rödermark site. Company Erich Mieth: Tel. 06074-90877 Monday - Friday: 9:00 am - 12:00 pm and 2:00 pm - 5:00 pm The price includes 19% VAT. You will receive an invoice with VAT shown separately. Sale to commercial customers only. Payment by bank transfer before collection of the machine.

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Njdpfoltrmuox Aa Eswr Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: ready for operation (used), Pressure force: 10 tons Nwjdpfx Aajhtq Hfs Eor Projection: 110 mm Required space: 300 x 170 x 680 mm Weight: 32kg

Condition: good (used), machine/vehicle number: 550C08, A used punching PEDDINGHAUS with large throat and large plate with attacks Nsdpfxjd Hxrto Aa Eowr Cutting capacity 45 tonnes Stroke rate 40 strokes/min Projection 762mm Arbeitshöte 1110mm

Condition: new, Hydraulic hole punch model PUMA 55 For punching sheet metal, flat steel and steel profiles Technical data: punching force 550 kN Max. Punching capacity Ø 40 in 10 mm Throat 500 mm Engine power 5 kW Stroke rate with 20 mm stroke 38 /min maximum stroke 60 mm Machine weight at outreach 500: 1150 kg Optional accessories available, please ask for price. Optional extras: Oversized punching unit up to 100 mm complete Base table plate for oversized punching equipment Throat 500 mm Laser positioning unit integrated in the downholder Multi-position table For Puma 55 S table size 1000 x 650 mm (see figure 2) Punching device for UNP and INP from 40-80 mm Special die for this Linear rail 2000 mm, complete with 8 tilt stops, Linear punching table with fence ruler and 2 finger stops with console Automatic positioning table Semi Paxy with stop in 2 axes incl. control B&R Table 1000 x 400 mm with B&R control 15" Njdpfofdgh Tex Aa Eswr Table 2000 x 400 mm with B&R control 15" (Table can be extended by the meter up to 5000mm) (Figure 3 shows 15" controller) service: Training and instruction incl. travel expenses

Condition: good (used), Year of construction: 1978, Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press Njdpfxewrn U Hj Aa Eowr -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate -Thrust: 500 mm -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg

Year of construction: 2009, condition: ready for operation (used), machine/vehicle number: 527, Offer 23035 Technical data approx: Nsdpfxelnkc Ue Aa Eewr - Pressure capacity 30 T. - max. sheet thickness 10 mm - max. punching diameter 105 mm - punching capacity - e.g. steel sheet : 105 mm in 1,5 mm ; 45 mm in 5 mm - e.g. VA - sheet metal : 90 mm in 1,5 mm ; 45 mm in 4 mm - stroke 7 - 70 mm - throat 560 mm - maximum stroke rate 120 H/min - single stroke / continuous stroke - drive 400 V / 4 kW - space requirement approx. W 8000 x H 1850 x D 1700 mm - weight approx. 1900 kg - with: - stop table with stops - foot switch; - emergency stop button - punch quick change device - various receptacles for punches and dies

Condition: good (used), Year of construction: 1995, Technical data: Njdshikdaepfx Aa Ejwr - Pressure capacity 250 KN - max. sheet thickness 6 mm - max. punching diameter 90 mm - stroke 42 mm - throat 500 mm - maximum stroke rate 200 H/min - connected load 4 kW - space requirement LxWxH 1000 x H 1750 x D 1400 mm - weight approx. 1600 kg

Condition: used, Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square Nwsdpst Hmi Asfx Aa Ejr -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg

Year of construction: 1982, condition: good (used), machine/vehicle number: 0155282778711, OFFER 21455 Technical data: - Pressure capacity 450 KN - punches e.g. up to 25 mm Ø in steel 15 mm - stroke infinitely variable 0 to 60 mm - stroke rate approx. 16 to 47 1/min - throat 760 mm Njdpfx Aaohkr Dao Eowr - Installation height 215 mm - working height 1150 mm - Drive 400 V / 7,5 kW - Space requirement approx. W 850 x H 1850 x D 1650 mm - Weight approx. 1350 kg - with: - E. foot switch - 20 pieces div. hole punches + dies

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm Njdpfx Aajik Sl Ho Eowr -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: Nwodpjpuy H Dofx Aa Esr - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: used, Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm Nwjdpfx Ast Hmivoa Ejr -Weight: 6.8 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: Nwodpfxoit T Hyo Aa Ejr - Pressure capacity 50 T - throat approx. 360 mm - installation height approx. 240 mm - drive 400 V / 7,5 kW - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm - weight approx. 1800 kg

Condition: used, Hand punch, hand punch, eccentric punch, hand lever punch, spindle punch, hole punch -Stamp: Ø 8 mm Nwedpfjfkv Sbox Aa Esr -Dimensions: 600/100/H475 mm -Weight: 13.1 kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm Nedpfxjrll I Us Aa Eowr - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: good (used), Year of construction: 1993, Offer 23481 Technical data: - Pressure capacity 30 T - max. sheet thickness 6 mm Nsdpfx Aaorgptij Eswr - Max. punching diameter 105 mm - stroke 42 mm - throat 700 mm - maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - table height 1000 mm - Drive 400 V / 4 kW - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - with: - stop table with adjustable stops - Quick stamp change device - foot switch; - Emergency stop button - Various punches + dies in separate workbench

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. Nedpfx Aajxb Ucao Eewr The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Year of construction: 1982, condition: reconditioned (used), Mubea / Muhr and Bender BFL 350: Nwodpoium Stjfx Aa Eor - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: good (used), Year of construction: 1992, Hydr.hole punching machine make häwa year 1992 working pressure.400bar with electric height adjustable supporting table Machine ready for use . Nsdpfx Aasgbk R Ue Eowr

Condition: good (used), Year of construction: 1991, 1 piece Hydr. hole punch MUBEA type HP 1000 / 760. Year of manufacture 1991 Punching force 100 tons Njdpfstv Hzvox Aa Ejwr With punching saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m) swiveling and digital display, carriage clamping and foot switch Dimensions L x W X H 1930 x 780 x 1980 mm Projection 760 mm Working height 1135 mm Hole 40 in 22 mm Stroke 0 - 70 strokes Number of strokes at full stroke 11 strokes Drive power 8.5 kW Weight 3800 kg 3600 kg Used, ready for operation

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: 0166890274834, control type: manual, degree of automation: manual, actuation type: hydraulic, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, throat depth: 650 mm, sheet thickness steel (max.): 15 mm, overall weight: 1,700 kg, total length: 1,500 mm, total width: 650 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), input voltage: 220 V, input current: 26 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2023, Equipment: foot remote control, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. punching tools Used punching machine from Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany. Nedpfjx Dtp Rsx Aa Eswr Condition: The machine has been professionally inspected by a machinery technician and is in very good, fully operational condition. All functions have been tested. Technical data (all information without guarantee): – Punching force: approx. 500 kN / 50 t – Max. punching diameter: up to approx. Ø 100 mm (e.g. Ø 30 mm in 15 mm steel) – Max. sheet thickness (steel): approx. 15 mm – Throat depth: approx. 610 mm – Stroke: approx. 60 mm – Drive: hydraulic, manual/conventional control with foot switch – Connection: 220/380 V, 3~, 50 Hz – Power: approx. 7.5 kW – Rated current: 26.3 A / 15.2 A Scope of delivery: – Muhr & Bender (Mubea) KLH 500/610 punching machine – including corresponding punching tools (scope as per photos) Important notes: – The stated price applies to self-collection only. – Dismantling, loading, and transport are the exclusive responsibility and at the expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Nodpfx Asxyy Aiea Ejwr Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Nwodpfxov N Hrto Aa Esr Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel