Used Gs 3268 Rt for sale (8,779)

Condition: used, first registration: 08/1978, Year of construction: 1978, LAG 37 m³ slurry trailer with 6 chambers ! Newly refurbished for approx. €10,000, new brake system, new 3rd axle, new electrical system, new air suspension! • Aluminum body • 37,200-liter capacity • 6 chambers of 6,200 liters each • 6 dome covers • Direct discharge at the rear! • 3 x BPW air-suspended axles • Drum brakes • 385/65 R 22.5 tires Giedpswmpatjfx Acwjr - New MOT! - Ready for use! Subject to errors and prior sale!

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Gijdpfxowty H De Acwer Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, A complete carton packaging and palletising line with comprehensive accessories is being auctioned here! This is a demo machine that was only in operation for a few days! COMPONENTS OF THE PACKAGING LINE Packaging robot KUKA KR 50 R2500 Iontec Gripper Base Labelling robot KUKA KR 10 R110-2 Agilus Gripper 2 Labelling systems Peripheral components Pallet station Room triangle Lantech carton erector Conveyor technology by Interroll Safety equipment Protective enclosure Safety door Safety tunnel Light curtain Centralised control system COMPONENTS OF THE PALLETISING LINE Palletising robot KUKA KR 120 R3200 PA Gripper Base Palletising software Flex Package Labelling robot KUKA KR 10 R1100-2 AGILUS Gripper Printwolf table printer Peripheral components Lantech carton sealer Lantech turntable stretch wrapper Conveyor technology Pallet dispenser BILA Pallet conveyor system by Interroll Carton conveyor system by Interroll Carton conveyor system NiO Interroll Safety equipment Giedpfxjxhf Awe Acwor Protective enclosure Safety doors Programmable safety PLC Airlock at the pallet exit Protection tunnel Centralised control system Further details on the individual components can be found in the attached inventory list. The machine can be provided ready for free loading. Dismantling and loading costs amount to €48,000.

Condition: new, functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, spindle speed (max.): 10,000 rpm, XV 1060 Control SINUMERIK 828 D - ShopMill with 15.6" touch screen Clamping surface 1,160 x 600 mm, number of T-slots: 5 X-axis: 1,000 mm, Y-axis: 600 mm, Z-axis: 650 mm Min. distance spindle nose - table: 130 mm, max. 780 mm SK 40 taper, spindle max. speed 10,000 rpm Double-arm tool changer, 24 tools Standard features: - Rigid tapping - Swiveling operator panel - Sliding door with interlock - Viewing windows in work area enclosure - Control cabinet with heat exchanger - 2 LED work area lights - 3-color machine status indicator light - Portable electronic handwheel - Central automatic grease lubrication for all linear axes and X, Y, Z ball screws - Power-off after program end - Compressed air at main spindle for chip removal - Chip flushing system with rinse gun - Spindle cooler for 10,000 rpm - Air gun Godpfoxugyqjx Acwjir - Coolant nozzles at spindle - Work area lighting on/off switch - 1 set of leveling elements - Electrical system in accordance with VDE regulations

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1200 units per shift! TECHNICAL DETAILS Production capacity: 150 units/h MACHINE DETAILS Electrical Data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Giodpoxdibpjfx Acwjr Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra/Thin Spacer Frame Machine i-3 - CE version Warm-edge spacer manufacturing system Production of Intercept ULTRA stainless steel, ThinPlate, or BlackLine Note: The machine is available from 02/12/2025!

Condition: used, GS Mach approx. 6.5" extruder with Water Ring Pelletizer, with Water Ring Pelletizer, spin dryer, screen changer, and hopper, includes all control panels, 177 HP, 3 phase motor, also includes Color Feeder, in working condition, winning bidder responsible for proper disconnection and removal. Godsxd D Nnspfx Acweir

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 918106, turning diameter over cross slide: 500 mm, turning length: 560 mm, turning diameter: 420 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 600 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,260 mm, total length: 3,430 mm, total width: 1,810 mm, feed length X-axis: 230 mm, feed length Y-axis: 110 mm, feed length Z-axis: 600 mm, swing diameter over cross slide: 500 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, turning diameter over bed slide: 650 mm, workpiece weight (max.): 230 kg, turning diameter over top slide: 500 mm, type of input current: three-phase, torque: 287 Nm, overall weight: 5,800 kg, swing diameter over bed slide: 650 mm, bar passage: 65 mm, chuck outer diameter: 250 mm, center width: 560 mm, spindle nose: A2-8, bar diameter (max.): 65 mm, Equipment: rotational speed infinitely variable, 🔹 FOR SALE: 2006 Goodway GS-260MYS CNC Lathe – Very Good Condition – Ireland 🔹 Make: Goodway Model: GS-260MYS Year: 2006 Control: Fanuc Series 18i-TB Machine Type: CNC Turning Centre with Sub Spindle, Driven Tools, Y Axis & C Axis Condition: Very Good Location: Ireland Availability: Immediately available 📌 Description: For sale is a 2006 Goodway GS-260MYS CNC Lathe, a powerful multi-axis CNC turning centre equipped with live tooling, Y-axis milling, and a sub spindle. This robust machine is ideal for complex turning and milling operations in a single setup — perfect for modern precision engineering environments. Maintained in very good working condition, it includes a selection of manual and driven tool holders, 2 chucks, and a swarf conveyor. 🔧 Technical Specifications: Main Spindle: Chuck Size: 10" (250 mm) Bar Capacity: 65 mm Spindle Nose: A2-8 Max Swing: 650 mm Swing Over Saddle: 500 mm Max Turning Diameter: 420 mm Standard Turning Diameter: 205 mm Max Turning Length: 560 mm Max Part Weight: 230 kg Hole Through Drawtube: 65.5 mm Hole Through Spindle: 76 mm Spindle Drive: Direct Belt Drive Spindle Speeds: 40 – 4,000 rpm Continuous Spindle Motor: 11 kW 30-Min Spindle Motor: 15 kW Spindle Torque (Cont.): 210 Nm Spindle Torque (30 Min): 287 Nm Axes: X Axis Travel: 230 mm Z Axis Travel: 600 mm Y Axis Travel: ±55 mm X/Z Rapid Traverse: 20 m/min Z2 Axis Travel (Sub Spindle): 600 mm Z2 Rapid Traverse: 24 m/min Tooling: Turret Stations: 12 Gisdpfx Acowtpdfewer OD Tool Shank Size: 25 mm ID Tool Shank Size: Up to 40 mm Live Tooling Stations: 12 Live Tool Drive Motor: 4.5 kW Live Tool Torque: 22 Nm Sub Spindle: Chuck Size: 6" Spindle Nose: A2-5 Hole Through Spindle: 46 mm Continuous Motor Output: 5.5 kW 30-Min Motor Output: 7.5 kW Spindle Speed Range: 60 – 6,000 rpm Drive: Built-in Motor Construction: Slideways: Hardened & Ground Box Ways Machine Dimensions: 3430 x 1810 x 2260 mm Machine Weight: 5,800 kg 🧰 Included with the Machine: Selection of Driven Tool Holders Selection of Manual Tool Holders 2x Chucks Swarf Conveyor Note: Tools shown in photos are not included – only the holders are provided. 🛠 Suitable For: Precision turning, mill-turn applications, production of complex components in aerospace, medical, automotive, and general engineering sectors. Used CNC Lathe Ireland, Goodway GS-260MYS for Sale, CNC Lathe with Y Axis and Sub Spindle, Live Tool CNC Turning Centre, CNC Turning Machine Europe, Fanuc CNC Lathe for Sale, Multi-Axis Lathe Machine Used Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, functionality: fully functional, Year of construction: 2008, Used Darley guillotine shear Type GS 4113 CL Capacity 4050 x 13 mm Giodpfjyzf Eusx Acwjr Year of manufacture 2008

Condition: good (used), functionality: fully functional, Year of construction: 2008, Used 4-meter guillotine shear by Darley Gisdpjyzd Ihefx Acwsr Model: GS 4113 CL Capacity: 4100 x 113 mm Delem DAC 350 CNC control CNC backgauge High support table Year of construction: 2008

Condition: ready for operation (used), Year of construction: 2018, operating hours: 62,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Godpjwptfrsfx Acwoir Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: excellent (used), functionality: fully functional, Condair humidifier, Currently still in use in an office building. Dismantling scheduled for mid-September. Length: 1,600 mm. Width: 710 mm. Height: 1,700 mm. Estimated year of manufacture of this machine: November 2018. Giedpfjy Alursx Acwor

Condition: used, Year of construction: 2015, travel -x axis 3.000 mm travel -y axis 1.500 mm travel -z axis 2.000 mm control HEIDENHAIN - TNC 530 Gisdey Aa Nwopfx Acwsr with NC rotary table 1.600 x 1.400 CNC Bed Type Milling Machine - Universal | MTE - RT-3000 equipped with NC swivel rotary table and tool changer. The machine is in good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RT3000 | RT 3000

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, workpiece weight (max.): 6,000 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, LAGUN BM 3RT Bed-Type Milling Center with Rotary Table – Available at Short Notice The LAGUN BM 3RT is a high-stability bed-type milling center with rotary table, designed for heavy-duty and precise machining. Ideal for single-part manufacturing as well as series production, it meets the highest demands for rigidity, accuracy, and reliability — without the need for elaborate foundation works. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease purchase / financing available ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Why choose LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING), known for robust construction, high dynamics, and decades of experience in building bed-type milling machines. The machines stand out for their exceptional reliability, ease of maintenance, and economical operation. Technical features: Control System: HEIDENHAIN TNC 7 CNC path control + 19" TFT display Giodohy At Aspfx Acwsr HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool Changer: 40-position chain magazine with double gripper Chip Removal: Double hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimetric) Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Your benefits with JMT: ✔ Official LAGUN distributor in Germany ✔ On-site technical support & service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we’ll be happy to advise you and provide an individual quotation

Condition: used, mileage: 246,497 km, power: 397 kW (539.77 HP), first registration: 05/2022, fuel type: diesel, empty load weight: 17,455 kg, maximum load weight: 19,545 kg, overall weight: 37,000 kg, axle configuration: > 3 axles, wheelbase: 5,550 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, crane, cruise control, differential lock, hydraulics, navigation system, parking heater, Color: White, Unladen weight: 17,455 kg, Gross permissible weight: 37,000 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/80 R22.5, 3rd axle: 385/65 R22.5. Velour seats, Air suspension, Hydraulic tipping system, Lift axle, Retarder, Digital tachograph, Foldable loading crane mounted behind the cab, Rear-mounted loading crane, EBS (Electronic Braking System), ESP (Electronic Stability Program), Automatic climate control, Adaptive Cruise Control (ACC), Seat heating, LED headlights, Headlight cleaning system, Automatic lights, Headlight height adjustment, Radio, Digital radio reception (DAB), GSM preparation Bluetooth, Rain sensor, Leather steering wheel, Mechanically adjustable steering column, Electric windows, Sunroof, Roof spoiler, Fog lights, Electrically adjustable and heated exterior mirrors, Electrically adjustable curb mirror, Wide-angle mirror, Immobiliser, Central locking, Wind shield, Refrigerator, Axle load indicator, Hill Hold Control (HHC), LED daytime running lights, 1x15-pin connector, Driving function, Cornering light, Telematics system, Lane change assist left/right, SCR, HIAB X-HIPRO 232, GS-MEPPEL TRAILER YOM 2017. Box dimensions front truck: 695x256x100 cm, box dimensions trailer: 642x243x100 cm, Crane hours: 691h. PLEASE CALL OR E-MAIL FOR MORE INFORMATION. Gijdpfx Aoydrd Ujcwor

Condition: used, Year of construction: 1986, Cutting bench, cutting shear Type: Hydraulic Gsdpfownh Ncex Acwoir Manufacturer: Darley Type: GS 3100x13 Year: 1986 Control: Conventional Cutting width: 3100mm Cutting thickness: 13mm Electric Backgauge Motor-power: 22kW Incl. frontloader-arm Total dimensions: 3750x1900x2150mm Machine-weight: 10000kg - Year: 1986 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, power: 265 kW (360.30 HP), fuel type: diesel, color: yellow, lifting height: 26,000 mm, mast type: telescopic, Year of construction: 2006, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Year of manufacture: 2006 Drive: Wheel Gijdpfx Acjw Rpttower Number of cylinders: 6 Engine displacement: 14,000 cc Lifting capacity: 30,000 kg Body make: GROVE RT 530E

Condition: used, Year of construction: 2006, operating hours: 71,000 h, functionality: fully functional, MTU 16V 4000 GS L61 gas generator. Year of manufacture: 2006. Operating hours: 71,000. Voltage: 10,000 V. Delivery includes: * genset on skid * gas train control panel * pump unit * documentation and logbook. In fully operational condition. Giedpfxjy At Awe Acwor

Condition: excellent (used), functionality: fully functional, stroke length: 215 mm, controller manufacturer: ESA, control type: CNC control, number of axes: 6, Equipment: CE marking, foot remote control, lower tooling, safety light barrier, upper tooling, New ESA Cnc control on our quality used Edwards Pearson 6axis cnc pressbrake for sale Make: Edwards Pearson Giedpfx Acsxtpadswsr Model:RT 100x3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Upgraded ESa cnc control New / Upgraded Fiessler Guards 4 axis back gauge – z1, z2, x and r axis – 6axis in total Complete with: Crowning Automatic Hydraulic Tool Clamping Machine is in good working condition and includes a full length set of upper & lower Pressbrake tooling

Year of construction: 2003, condition: excellent (used), Amada GS 630 sheet metal hydraulic cutting machine for sale G Series Hydraulic Shear – Video at the bottom of this listing Specification: Model: 630 Max Plate Thickness mild steel (mm): 6.35 Max Plate Thickness stainless steel (mm) 4 Max Cut Length (mm) 3050 Max Stroke / min 35 Motor Size (Kw) 5.5 Machine Weight (Kg) 6150 Back gauge speed (mm/s) 100 Back gauge Range (mm) 10-1000 Giodpfx Acsimwcqjwsr

Condition: used, machine/vehicle number: 12979, Rotor diameter: 300 mm Rotor width: 200 mm Rotor knives: 3 Stator knives: 3 Gijdpfx Ajyr Tw Sjcwjr Feed opening approx. 220×320 mm Drive motor: 5.5 kW

Condition: used, machine/vehicle number: 13206, Rotor diameter: 300 mm Rotor width: 400 mm Gedpfx Aeyr Tv Iocweir Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 300 x 400 mm Drive motor: 15 kW

Condition: used, machine/vehicle number: 12883, Rotor width: 800 mm Gisdpfxsyr Trij Acwsr Rotor blades: 5 Stator blades: 4 Inlet cross-section approx. 500 x 800 mm Drive motor: 45 kW

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor Gedpfoyr Tqlox Acwoir 2 rows of stator knives Infeed cross-section approx. 600 x 660 mm Drive motor: 30 kW

Condition: used, machine/vehicle number: XLWRT223XB1580957, Year of construction: 2011, operating hours: 18,462 h, fuel type: diesel, Production country: NL Gijdpfoy Aamvox Acwsr Please contact Theo Lelie for more information

Condition: used, machine/vehicle number: XLWRT382XC2352389, Year of construction: 2012, fuel type: diesel, Production country: NL Please contact Theo Lelie for more information Gedeyzzrqopfx Acwjir Terberg RT382 XLWRT382XC2352389 Bj 2012 36.307 hours (engine is checked) Cummins QSM11-C335 engine ZF 6WG-260 Gearbox GVW 60.000 kg GCW 190.000 kg Axle Load 1 20.000 kg Axle Load 2 45.000 kg Turntable load 45.000 kg 3.5 inch fifth wheel