Used Gleaner R 72 for sale (68,126)

Year of construction: 2017, operating hours: 1,752 h, condition: excellent (used), functionality: fully functional, Calender Monti Antonio 72-3600 + Plotter Mimaki JV5 320s Calender Monti Antonio 72-3600 Calender in very good technical condition, regularly lubricated. Cylinder diameter: 200 mm Material width: 3,200 mm Required pressure: 6-8 bar Speed: 0.1 - 1.7 m/min Max. temperature: 230 °C Maximum power consumption: 19 kWh, average consumption: 13 kWh Operating hours: 1752h Meter reading: 58104m Included with the calender is the graphic printer plotter Mimaki JV5-320s: The machine is in very good technical condition, all nozzles are open, regularly cleaned. On 07/07/2023, all print heads and accessories were replaced: Ledot Rhmkepfx Abyohn - DX5 print head – 4 pcs - Dampers – 32 pcs - Captops – 4 pcs - Pumps – 4 pcs - FPC tapes – 4 pcs - Sponges Approx. 1000 running meters have been printed since then. Total machine output: 13543m

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: System 3R-292.3 + 3R-272HP, overall weight: 5 kg, load capacity: 7 kg, The vise has a clamping width of up to 100 mm and a load-bearing capacity of up to 7 kg. The vise is fully functional and has seen little use. It can be purchased as a complete set with a 3R-272HP leveling head. Lhodpfx Abs Aa Rfrjyjn There are only signs of wear on the movable clamping jaw, where a small cut from wire erosion is visible, but this does not affect the clamping performance or accuracy. See the pictures!

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks The machine is isobaric Ledpjvtgaxefx Abyehn

Year of construction: 2012, condition: used, Three-story, modular container system manufactured by PLATAL Mobilsysteme GmbH in 2012, previously used as a school building with classrooms, ancillary rooms, and sanitary facilities. Manufacturer: PLATAL Mobilsysteme GmbH Year of manufacture: 2012 Construction: Modular container system Lsdpez N Ex Tefx Abyshn Previous use: School and sanitary facilities Overall dimensions (L × W × H): approx. 36,000 × 15,760 × 10,200 mm Floors: 3, identical in construction Total number of container modules: 72 units Container module type 1: 36 units, each 3,000 × 6,500 mm Container module type 2: 36 units, each 3,000 × 9,260 mm Module height: 3,400 mm Sanitary areas: 3, one per floor Exterior staircases: 2 steel exterior staircases with grating steps and landings Equipment: Windows with exterior roller blinds, radiators, suspended grid ceilings, lighting, electrical installations, and sanitary areas Room layout: Classrooms, corridors, ancillary rooms, and sanitary areas

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230022, Technical characteristics: Core Specifications Lhodpfexx Sawjx Abyon - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable channels, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable in 5 mm increments for optimal bar support. - Remnant Management: Allows rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enables axial or radial displacement of up to 600 mm for lathe maintenance. - Automation: Fully PLC-controlled with brushless motor and digital pneumatic valves for precise speed and thrust adjustment. - Bar Storage: Single-level magazine with 235 mm capacity. # Bar Feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI DIGITAL CONTROLLER FOR MANUAL OPERATIONS Machine Status: WORKING

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 13-230021, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, manufactured from Vulkollan-type plastic for optimal bar rotation at high speeds. - Front Steady Block: Interchangeable in 5 mm increments for precise bar support. - Remnant Management: Supports rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system enabling axial or radial displacement up to 600 mm for lathe servicing. - Automation: Complete PLC control with brushless motor and digital pneumatic valves for feed speed and thrust regulation. - Bar Magazine: Single-row magazine with a 235 mm load capacity. # Bar feeder: FMB Turbo 10-72 XT # AUTOMATIC BAR LOADER FOR LATHES Dimensions: - Bar feeder (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Main Features and Capabilities: - HMI digital controller for manual operation Machine status: Ledoxx R S Ejpfx Abyshn WORKING

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR240-2 2000 Industrial Robot, including control cabinet 57250 The KUKA KR 240-2 robot is a 6-axis robot arm with a payload of 240 kg and a reach of 2700 mm. Manufacturing applications include palletizing. Common applications for the KUKA KR 240-2 include: additive manufacturing, assembly, dispensing, deburring, material handling, palletizing, and remote TCP. Specifications: Manufacturer: KUKA Model: KR 240-2 2000 Type: Robot arm Axes: 6 Payload: 240 kg Reach: 2700 mm Repeatability: 0.06 mm Weight: 1267 kg Control cabinet: 57250 Year of manufacture: 02/2008 Used item – normal signs of wear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Lodpfxsz Ru D Ue Abyehn Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: used, mileage: 350,000 km, power: 155 kW (210.74 HP), first registration: 01/2020, fuel type: diesel, overall weight: 7,200 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,930 mm, total width: 2,550 mm, total height: 2,950 mm, loading space length: 4,260 mm, loading space width: 2,400 mm, loading space height: 1,850 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Iveco Daily 72-210 beverage truck equipped with the globally popular 3.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6 standard * 1st owner * N1 truck registration Equipment: Ledpfez Ex Ewox Abyjhn * Beverage truck body * Flatbed + tarpaulin * HI-Matic automatic transmission * Air suspension * Automatic climate control * Tow hitch * Rearview camera * Cruise control * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 7200 KG * Unladen weight: approx. 3500 KG * Payload: 3700 KG * Trailer load: 3300 KG Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transit registration (5-day / customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! The special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone a thorough maintenance service. Of course, this includes new fluids, filters and other services that you shouldn't have to worry about. Optionally, we can present the vehicle to an independent inspection center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found at: Special equipment: Storage compartment on dashboard with USB connection, front axle load 2.7 t, trailer socket 13-pin, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, audio/telephone controls on the steering wheel, body manufacturer interface, vehicle key with remote control, speed limiter system programmable, cooling compressor 170 ccm, steering column (steering wheel) height/longitudinally adjustable, smoker's package, switch for lighting in the cargo area, mud flaps front, Traction Plus (electronic traction control) with hill descent assist Further equipment: Airbag driver side, trailer stabilization program (TSM), trailer socket preparation, drive slip control (ASR), design: C-series, exterior mirrors electrically adjustable and heated, exterior mirrors long, for vehicle width 2350 mm, electronic brake force distribution, driving assistance system: emergency braking assistant AEBS + City Brake, tachograph digital, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, speed limiter 90 km/h, grab handle A-pillar, urea tank (AdBlue): 20 L, body/structure: standard flatbed, fuel tank: 90 L, engine 3.0 L - 154 kW diesel, wheelbase 4100 mm, spare wheel in driving condition, spare wheel holder between floor longitudinal members, low emission according to emission standard Euro 6d, seats in the cab: co-driver double seat, seats in the cab: driver's seat comfort (hydraulic), maintenance indicator, permissible total weight 7.00 t, twin tires on 2nd axle / rear axle

Condition: used, mileage: 350,000 km, power: 155 kW (210.74 HP), first registration: 01/2020, fuel type: diesel, overall weight: 7,200 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,930 mm, total width: 2,550 mm, total height: 2,950 mm, loading space length: 4,260 mm, loading space width: 2,400 mm, loading space height: 1,850 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Iveco Daily 72-210 with a beverage transport body and the globally popular 3.0-liter diesel engine. The vehicle is in good condition! * German vehicle * Euro 6 standard * 1st owner * N1 truck registration Equipment: Beverage transport body * Flatbed + cover * HI-Matic automatic transmission * Air suspension * Automatic climate control * Trailer hitch * Rearview camera * Cruise control * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 7200 KG * Unladen weight: approx. 3500 KG * Payload: 3700 KG * Trailer load: 3300 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices * Transfer license plates (5-day/customs registration) usually on the same day Lhedpfx Asz Ex Eqebysn * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! The special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone thorough maintenance. Naturally, this includes new fluids, filters, and other expenses that you shouldn't have to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found at: Special equipment: Storage compartment on dashboard with USB connection, front axle load 2.7 t, trailer socket 13-pin, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, audio/telephone controls on the steering wheel, body manufacturer interface, vehicle key with remote control, speed limiter system programmable, cooling compressor 170 ccm, steering column (steering wheel) adjustable in height/length, smoker's package, switch for lighting in the cargo area, front mud flaps, Traction Plus (electronic traction control) with downhill assistance Additional equipment: Airbag driver side, trailer stabilization program (TSM), trailer socket preparation, drive slip control (ASR), design: C-series, exterior mirrors electrically adjustable and heated, exterior mirrors long, for vehicle width 2350 mm, electronic brake force distribution, driving assistance system: emergency brake assistant AEBS + City Brake, tachograph digital, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, speed limiter system 90 km/h, grab handle A-pillar, urea tank (AdBlue): 20 liters, body/structure: flatbed standard, fuel tank: 90 liters, engine 3.0 liters - 154 kW diesel, wheelbase 4100 mm, spare wheel in driving condition, spare wheel holder between floor longitudinal members, low emissions according to emission standard Euro 6d, seats in the cab: passenger double seat, seats in the cab: driver's comfort seat (hydraulically), maintenance indicator, permissible total weight 7.00 t, twin tires on 2nd axle/rear axle

Condition: used, Table Size 72” Machine swing 84” Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” 4 Std jaws Main motor 40hp Lodpfx Abozkkcueyehn Newall 2 Axis Digital Read Out

Condition: as good as new (ex-display), Year of construction: 2025, Compact and flexible in the smallest of spaces. At a length of only 2.13 m, workpieces are finished here. Equipped with a 1.1 KW high-frequency pre-milling unit and diamond-tipped spiral jointing cutter, Teflon-coated glue unit, pre-cut-off unit and HF multifunction milling unit, 2 free spaces for finishing units, such as a glue scraper unit and buffing unit. Easy operation via 3.5" color touch screen. ► Control via 3.5 inch color touch screen ► pre-milling unit with a 1.1 KW high-frequency motor with diamond-tipped spiral milling cutter in the counter-rotation ensures clean and Tear-free joining of the workpieces before the edge is banded ► Teflon-coated glue Pot with automatic stand-by function ► Automatic edge feeding with roller plate D = 600 mm for Edge material as roll goods as well as fixed lengths of 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressure of the Edge material. ► HF multifunction milling unit - suitable for radius and flush milling of the longitudinal edge, as well as for the front and rear edge of the workpiece, incl. vertical rounding of the edge ► 2 free spaces for finishing units such as glue scraper unit or buffing unit ► Workpiece chain feed with rubberized chain plates and Double Roller Upper Pressure ► Pressure bar with central adjustment and SIKO display ► Fixed workpiece support (optionally extendable workpiece support for large workpieces) ► 400 mm long infeed lineal with support ► LED lighting in the cabin (optional) ► Machining of workpieces with a thickness of 10 – 45 mm ► Feed speed 6.5 m/min ► Machine length 2130 mm Lhodporrzklefx Abyjn 67641340f13ce

Year of construction: 2019, condition: like new (used), Operates using the Coriolis effect. Designed to directly measure mass flow, fluid density and temperature and to calculate volumetric flow and concentration. Serial number 14867499. Manufactured in stainless steel, with a twin curved tube configuration, electrical connection via a terminal box and flanged process connections. Flow calibration factor 703.174.29. Constants K1 10696.58, DT 4.42, K2 12680.02 and FD 227.8822. Designed for group 1 fluids, with an allowable temperature range from minus 196 to 204 degrees Celsius, maximum pressure of 40 bar at 25 degrees Celsius and allowable pressure of 34 bar at 204 degrees Celsius. CE marked. Lhodpjz R A S Hsfx Abyon

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's. Lhjdpfx Ajtyy Sfobyon

Condition: good (used), USED DEVLIEG 43H-72 SPIRAMATIC JIG MILL Equipped With: Spindle Diameter - 4" Spindle Nose Taper - No. 50 NMTB Spindle Travel - 20" Table Size - 35" x 72" Horizontal Travel - 72" Retraction of Table - 16" Vertical Travel of Head - 52" Ledpfx Aoimd H Nebyehn Spindle Speeds (16) - 21 to 1000 RPM Spindle Feeds (8) - .002" to .024" Milling Feedrates X & Y (16) - 0.5 to 36 IPM Rapid traverse in all directions Approx Floor Space - 205" x 146" x 126" Weight, Approx – 14.515 kg Dimensions: FB X RL - 11'8" X 16' with sliding gaurds X Height: 10'10" all the tools/microbores from the pictures will be delivered together with the machine and are included in the final price. Price Euro 14.700 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Lsdoxl Hi Topfx Abyshn

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS DATA Nominal pressing force: 400 kN Stroke frequency: 800 min⁻¹ Ram stroke: 5–50 mm Ram adjustment: 50 mm Ledpfx Abs Aduyzeyehn MATERIAL DATA Material thickness: 1.5 mm Material length: 1–50 mm Strip cross-section: 110 mm (?) Material width: 10–75 mm Strip speed: 45 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD 32-720HS Machine type: Punching machine Year of manufacture: 1994 Machine number: 1829697 Operating voltage: 400 V Frequency: 50 Hz Drive power: 19 kW Length: 3,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 4,000 kg EQUIPMENT Feeder GF50

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 4,429 h, fuel type: electric, battery capacity: 620 Ah, battery voltage: 80 V, battery weight: 1,558 kg, TECHNICAL DETAILS Fuel type: electric Front tire size: 21x8-9 (50%) Rear tire size: 7.00-12 (70%) MACHINE DETAILS Battery Lhodpsza Dnkjfx Abyjn Nominal voltage: 80 V Nominal energy: 47.1 kWh Nominal capacity: 620 Ah Weight: 1,558 kg Cell type: 4 TPzS 620 Operating hours: 4,429 h

Condition: used, Year of construction: 2007, Müller Martini Acoro A7 Year: 2007 / 2000 / 1999 Consisting of Gathering machine Müller Martini 3693 Year: 2007 Description: - Chain tensioning station - Hand feeding station - Number of gathering stations: 15 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - PIAB - Reject gate for incomplete products: 3715 - Intermediate element - Book block feeder: 3642 - Transfer into the binder Perfect binder Müller Martini Acoro A7 - 3027 - 22 Year: 2007 Description: - Semi automatic setting - Colour monitor with touch screen - Book measuring table: 3013 - Number of clamps: 22 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - PUR spine gluing unit, interchangeable (nozzle) - PUR premelter for PUR spine glue unit: Meler Micron Pur - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit Ljdpfek H Sfhox Abyehn - Drum cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Müller Martini Description: - Transport system, length (approx): 60 mtr - Escape delivery Three knife trimmer Müller Martini Merit S - 3671 Year: 2000 Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Book stacker Müller Martini CB 16 - 3631 Year: 1999 Description: - Compensating stacker - Turning device - Delivery to the right

Year of construction: 2024, condition: new, Here is a new AD-R 37220 being offered: Bending force: 220 tons Bending length: 3700 Distance between stands: 3100 mm Stroke: 265 mm Installed height: 530 mm Overhang: 410 mm Table height: 900 mm Table width: 104 mm Y-axis rapid traverse: 160 mm/s Y-axis working speed: 10 mm/s Y-axis retraction speed: 120 mm/s X-axis working speed: 250 mm/s R-axis working speed (manual): 250 mm/s R-axis travel: 250 mm/s X-axis distance: 650 Length: 4950 mm Width: 1770 Lhjdpfxod S I R Tj Abysn Height: 2900 Total weight: 14100 kg Options: CE with manual F.AKAS II M -FPSC-B-C + safety guard & switch R-axis X=650mm X,R (AL) European upper tool P97.75.R08 (one of them is a split die) European lower tool M.460R.85 (one of them is a split die) Quick clamping system CNC-controlled motorized crowning Y1, Y2, X, R (4-axis) X=650mm X,R Control unit - CNC DT-15 Graphical control unit S European clamping system S 60mm die holder (only for European dies) S Overhang 410 410 mm Rear gauge: motorized & linear guide & ball screw system Rear gauge finger, height-adjustable Rear gauge motor: AC type Adjustable support arms with linear guide over the entire length The machine can be inspected and demonstrated at any time in our demonstration center in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Year of construction: 2001, condition: good (used), Kaeser BSD 72 compressor Ledpsmnqkiefx Abyjhn

Condition: used, Year of construction: 1998, short loader bar diameter 12-72 mm Ledpjvvuu Nefx Abyehn

Condition: good (used), Year of construction: 1999, Lg 33922 Unwinding and guiding unit SOPREM BRH 7-200-80U-1250 BAP Web width: max. 200 mm Coil weight: max. 1,250 kg Lhsdpfx Ashuwacebyjn Spreading range: approx. 380 to 430 mm Coil outer diameter: max. 1,300 mm Web thickness: approx. 0.8 to 3 mm Working direction: from right to left

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 280127900226, Year of construction: 2008, operating hours: 16,627 h, load capacity: 25,000 kg, fuel type: electric, No minimum price – guaranteed sale to the highest bidder! Comes with a battery from 2024! TECHNICAL DETAILS Load capacity: 25,000 kg Lhsdpsz I Nbnjfx Abyon MACHINE DETAILS Drive: electric Battery voltage: 80 V Battery year: 2024 Unladen weight: 2,390 kg Operating hours: 16,627 h EQUIPMENT Heater Full cab External reference: SL15869SP

Condition: used, UNIMOG 403 flatbed truck with tilting mechanism • Vehicle is fully operational, chassis is clean, minimal rust! • Passenger seat needs repair / reupholstery! • Flatbed does not have a floor! • 4-cylinder engine with 53 kW / 72 hp • Displacement: 3,758 cm³ • Permissible gross vehicle weight: 6,000 kg • Unladen weight: 3,600 kg Lsdpozmfudsfx Abyehn • PTO (power take-off) at the front and rear • Tow hitch – pintle hitch • Towed weight: 18,000 kg with braked trailer / 1,500 kg without • Vehicle dimensions: 4,160 x 2,130 x 2,320 mm (LxWxH) • Tires: 12.5 - 20 MPT 10 PR • Tread depth: 70% • German vehicle! Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CNC machining center Hedelius Forte 7-2600 Magnum Control system: Heidenhain TNC 640 Year of manufacture: 2020 Availability: in transit Lhedpezzl Ugjfx Abyen Internal machine no. 73 Travel distances: X-axis 2,600 mm Y-axis 750 mm Z-axis 800 mm Swinging operation: 2 x 1,000 mm Total clamping area: 2 x 1,490 x 750 mm Table load: approx. 2,500 kg Tool holder: HSK 63 Tool magazine: 50 positions Spindle speed: 50 - 18,000 rpm Drive power: 35 kW Equipment: - Inclined bed coolant system 900 l - Chip conveyor - 2 x flushing guns - Electronic handwheel - Partition wall prepared - High-pressure pump 60 bar - 0-point clamping plates - Vises and tools as required - Prepared for work area partition