Used Grundfos Upc 50 120 for sale (78)

Condition: used, machine/vehicle number: 98362357, power: 2.2 kW (2.99 HP), input voltage: 500 V, input frequency: 60 Hz, input current: 4 A, type of input current: three-phase, type of cooling: air, rotational speed (max.): 4,000 rpm, protection type (IP code): IP55, Pump from a well-maintained installation, with few operating hours. Nwodpfezb E Axox Abkoh

Condition: used, overall weight: 50 kg, power: 5.5 kW (7.48 HP), input voltage: 480 V, input frequency: 50 Hz, input current: 11 A, type of input current: three-phase, Pump from a well-maintained installation with few operating hours. Njdpfxozb Elge Abkswh

Year of construction: 2023, condition: used, Pump speed 2.924 U/min Nominal delivery flow 21 m³/h Rated head 95,1 m Capacity 11 kw In our assessment, the pumps are in good used condition. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Nsdpfjzbvgujx Abkswh

Condition: good (used), Item: D-1903-Grundfos pump CR8-30 Njdpfx Absirfblokswh Water pump, Grundfos, used! Type P2-140 K Capacity 2.000 l, 90 m. 1,1 kW

Condition: used, Q 33.0 m³/h Nwsdpfx Asikwapebkoh P 15,0 kW max. 20 bar max. 110 C° H 90.0 m Nr. 4932869340 232 kg

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe Njdpsyug R Refx Abkewh handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors Nsdpfxsyug Hxe Abkowh • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.37 kW 2900 rpm -Max. flow rate: 2.0 m³/h -max. H: 14.8 m Nodpfsb A Ni Nox Abkjwh -Dimensions: 200/210/H420 mm -Weight: 15 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump Nwodecxq Atopfx Abksh -Drive: 0.75 kW 2810 rpm -Max. flow rate: 9.0 m³/h -Max. pressure: 18 mWS -Quantity: 1 available -Dimensions: 380/225/H565 mm -Weight: 36 kg

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm Nedpfxshtryxj Abkewh -Weight: 11 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH4-40/4 AWA-AUUV Nwedpoy Tkazefx Abksh -Drive: 1.1 kW 2850 rpm -Max. flow rate: 4 m³/h -Max. delivery head: 36.9 m -Immersion depth: 200 mm -Dimensions: 230/180/H435 mm -Weight: 14.9 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH2-90/7 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 2.5 m³/h -Max. delivery head: 64.6 m -Immersion depth: 250 mm -Dimensions: 230/180/H490 mm -Weight: 13.9 kg Nwodpfxjy Ti I Re Abkeh

Condition: used, power capacity / kW volt / V ampere / A GRUNDFOS MG 90LC2-24FT115-D submersible pump, centrifugal pump The parts were dismantled from functioning systems up until their Nsdpfey S D Suox Abkowh decommissioning or originate from a liquidation of stock.

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Technical data Manufacturer: Grundfos Model: CRN5-11 A-P-A-E-HQQE Motor power: 2.2 kW Frequency: 50 Hz Rotational speed: 2899 rpm Capacity: 5.8 m³/h Nwodpfxsyubcnj Abkeh Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: used, MG160MB2-42FF300-H3, 160BB, Grundfos, 3-phase AC standard motor Nsdpfxeutan Ee Abkswh Model: MG160MB2-42FF300-H3 Type: 160BB Condition: Used

Condition: used, coolant capacity / l/min Nwsdpfjy Sut Nox Abksh Capacity / Watt conveying height / Immersion pump Type: MTH4-60/4 A-W-A-AUUV

Condition: excellent (used), GRUNDFOS PUMP TP80-400/2 Item: D-5490-Grundfos pump USED WATER PUMP, GRUNDFOS Type TP80-400/2, 15,0 kW, Bar/C - 16/120 Q - 114,8 m3/h H - Max 34,7 m O/m- 2940 Nodpfxel I R T No Abkewh Nice condition 3 pieces identical

Condition: ready for operation (used), Centrifugal Pump, Pump, Grundfos 4 kW, Used Machine Nwodpfxev Dr Ice Abkjh Manufacturer: Grundfos Type: CR 10-12 A-A-A-V-HQQV Overall Dimensions: Length: 255 mm Width: 240 mm Height: 1040 mm Flow Rate: 10 m³/h Head: 96.7-122 m Year of Manufacture: 2020 Electrical Data: 400V; 4 kW; 7.9 A

Condition: used, Submersible Pump, Multi-stage Centrifugal Pump, Grundfos SP27-19, Used Machine Manufacturer: Grundfos Type: SP 27-19 Njdpfx Aoyz Tphobkewh Technical Specifications: Nominal Flow Rate (Q): 14–36 m³/h Maximum Head (H max): 172 meters Motor Power: 15 kW Electrical Data: 380V / 50 Hz Weight: 100 kg Dimensions: Overall Dimensions: 2300 mm (Length) x 131 mm (Diameter Ø) Recommended Operating Range: Equipped with a 15 kW motor, this pump is ideal for applications requiring water delivery from depths or to heights between 100 and 140 meters. Within this range, the 15 kW motor operates with optimal efficiency and maximum reliability.

Condition: used, Manufacturer: Grundfos -type: LP 80 125/124 B-F-A-RUUV -model: 48/62941-P1-0250 -volume flow: 50m3/h -lifting height: 15.5m -operating pressure: 16 bar -operating temperature: 80°c Nwjdpfx Aey R Edcjbkjh -stem size: DN80

Condition: as good as new (ex-display), Grundfos CRNE1-9 Vertical multistage pump Nwodpfx Abevw Sqdekeh Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade stainless steel, see plate for full spec, 2 in stock

Condition: used, overall weight: 575 kg, volume flow: 550 m³/h, power: 75 kW (101.97 HP), We offer for sale Grundfos pump Type TP 200-510/4 A-F-A-DBUE. The pump is used, in very good condition. Nwedpfx Aewqnfvobkeh

Condition: good (used), Grundfos PNSNA96513352 Centrifugal pump Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). see plate for full spec, 2 in stock Nwedjx R U E Ajpfx Abkjh

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 1,200 mm, volume flow: 10 m³/h, operating pressure: 25 bar, power: 7.5 kW (10.20 HP), input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, The pumps were used to supply grinding oil for tool production. Nwjdpfx Aboylqbuskoh The pumps were in operation at a central plant until recently. There are 2 units in stock.

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Njdpjhy Nx Eofx Abkewh Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55