5
Centrifugal pump, water pump
-Delivery rate: 10-84 m³/h
-Max. H: 19.9-8.2 mwc
Qlzaomoau
-Motor power: 4.6 kW
-Speed: 2925 rpm
-Pipe connection: inlet DN
-Pipe connection: outlet DN
-Weight: 80 kg
3
excellent wilo centrifugal pumps, 2 pieces still available. both briefly used for rinsing water.
B3sraboy
12
Grundfos CRN 10-05 E-FGJ-G-E-HQQE
Bzhj2yqehh
Vertical, multistage centrifugal pump
Q 10m3 per hour
Hmax 51,1 mtr H 40,7 mtr
2899 rpm
2,2 kW
5
We offer here a SIHI Sterling pump BJ:2013.
Ysenoo
The pump is from unused stock and still in its original packaging.
6
Vertical multistage high-pressure centrifugal pump GRUNDFOS
Pump as good as new, but a part of the magnetic coupling has been dismantled.
Type CRN 10-09 MP-FGJ GI-V
Year of construction approx. 2012
Delivery rate at 7.2 bar: max. 10 m3/h
Delivery head: max. 91.8 metres
Power supply: 400 Volt, 50 Hz
Power: 3 kW
- Pump construction in 9 stages
- made of stainless steel 1.4401
- The new pump was used as a spare part dispenser, but there are several new pump chambers
- part of the magnetic coupling ...
10
Product condition New from old Stock
Case very good, no scratches
Guarantee in months 12
Height 11,8 m
Volume (max) 258 m³
Speed (Pump) 1460 rpm
Frequency 50 / 60 Hz
Rotation Speed 1460 / 1760 rpm
Power 11 kW / 12,6 kW
Voltage 400 / 690 V / 460 V
Bsohhzqh0h
Current 21,5 / 12,4 A / 21 A
Protection Class (IP) 55
Weight 174.2 kg
Stock location Rosenfeld
Stock ground P3B2
5
Centrifugal pump, water pump
-Delivery rate: liters/min
-Max. H: m
-Motor power: 2.0 kW
-Speed: 2870 rpm
Dyfph9d
-Pipe connection inlet: DN 90
-Pipe connection outlet: DN 60
-Dimensions: 350/350/H800 mm
-Weight: 42 kg
1
2 in good condition multistage centrifugal pumps, 45m3/h and 14.4 bar operating pressure. have been used for a test set-up of a RO installation
Bzokza29r7
8
1 piece used, tested block pump
delivery head up to 42 m
capacity up to 60 m³/h
suction flange DN 65
Byw3kkbclz
pressure flange DN 40
three-phase motor 7,5 KW
Year of manufacture 2018
10
Several identically constructed KSB Etanorm-C 65-200 C7
!! Price per piece !
Type/Design
Horizontal volute casing pump, single-stage with
bearing bracket, in process design.
Shaft in the area of the shaft seal with replaceable shaft sleeve/
shaft sleeve.
Volute casing and impeller with replaceable wear rings.
Volute casing with cast-on pump feet.
Bearings:
Deep groove ball bearing grease lubricated.
Shaft seal:
Mechanical seal according to EN 12756
Coupling:
Flexible coupling with/without interm...
2
Height 40 m
Volume (max)Q40,00 m³/h
Clludo2qc
Speed (pump) 1570 rpm
Frequency 50 / 60 Hz
Power 11 kW / 12,6 kW
Voltage 400 / 690 V / 460 V
Weight 170,00 kg
THERE ARE 2 PIECES AVAILABLE
8
Grundfos Vertical multistage centrifugal pump CR1-9 A-A-A-V-HQQV
Product condition New from old Stock
Packaging Originally packed
Gxzvyk
Manufacturer Grundfos
Guarantee in months 12
Pressure (pmax) 16 bar
Flow Head (max) 80,8 m
Volume (max) 2,2 m³/h
Speed (Pump) 3474 rpm
Frequency 50 / 60 Hz
Rotation Speed 2840 - 2870 rpm
Voltage 220 - 240 / 380 - 415 V AC
Temperature max. 90 °C
Weight 26.2 kg
Stock location Rosenfeld
Stock ground P12A1
5
Centrifugal pump, water pump
-Max. Delivery rate: 432 l/h
-max.: 40 m
-Motor power: 200 watts
-Dimensions: 375/95/H95 mm
T9vlbt9xx
-Weight: 4.1 kg
2
ITEM: D-2855-WATER PUMP-GRUNDFOS
Water pumps, Grundfos
NEW-Never used
Q 12,5 M3/H, H 19,9 M, 19/90 BAR
3 PIECES identical
Bpvdtoyczx
5
in mint condition, never used
with included inverter
5,5 kW, 400 l/min, 43mWs,
pump is stable against chemicals
P-111-01 PP Sondermann RM-MF 38/400
Bzosxtffi
MF PP/PVDF-VGKK-38/400-60S(60S)-5,5/3-FU
3 pumps are to be sold
The pumps had been installed in a never installed redox flow research plant. The plant had once tested with di water
No contamination
6
Description: Munsch pump mounted on frame
Type: NP-B 40-25-125 B2,REAI
Manufacturer: Munsch
2inqkkml
Year of manufacture: 2011
Documentation: yes
Inspection: yes
Storage location: Warburg warehouse
Status: used / second hand
flow rate: 3 m³/h
delivery head: 20 m
motor: 380V / 4,88A / 2,2kW
connections: DN50 / DN25 (suction side / pressure side)
Length: 550 / 970 mm (pump / with frame)
Width: 250 /400 mm (pump / with frame)
Height: 260 / 570 mm (pump / with frame)
Weight: approx. 9...
7
Stock item unused, filled with anti-corrosive and anti-freeze protection
Hpzoigu
3
Cooling lubricant pump TA1302-1070 from company Brinkmann
(Submersible pump /Centrifugal pumps)
Technical data:
Type TA1302-1070
Manufacturer Brinkmann Pumpen
Year of manufacture
Power 7,5 kW
rated current 13,6 A
voltage 575 V
Speed 345000 rpm.
Protection class IP55
Frequency 60 Hz
Weight 99 Kg
Jxa90u
Pump body cast iron
Cover cast iron
Impellers Cast steel
Shaft Steel
h = 1070
The pump is fully functional and was last overhauled by Becsi. Since then it is stored with us.
An inspection under po...
5
Centrifugal pump, water pump, multistage vertical centrifugal pump
-Max. Delivery rate: 5.0 m³/h
-Pressure: max. 25 bar
-Motor power: 3 kW
C2p0vzuq
-Speed: 2840 rpm
-Housing and impeller made of: stainless steel
-Weight: 45 kg
4
Centrifugal pump
Manufacturer: Grundfos
Type: CR30-40 A-A-BBUE B500004 P1 9313
Overall dimensions: 980 x 350 x 320 mm
Hi00qask0
Flow capacity: 30 m3/h
Pumping height: 41,3 m
Rotation: 2900 1/min
Maximal pressure: 16 bar (on 110 celsius degree)
9
Art. No. : Pum 149
vertical two-stage centrifugal pump
type : CR45-2-2
Item condition: new
Stock : 1
Available: immediately
Delivery volume: up to 45 m³
Delivery height: up to 41.4 m
Bxjvui0abq
Revolutions: 2919 U / min
Suction and discharge connection DN 80
Motor
Make: Grundfos
Power: 5,5 KW
Voltage: 380-415 V
15
Design: Pumping station with two Munsch chemical centrifugal pumps connected in parallel mounted in the frame.
Piping incl. check valves, butterfly valves, ball valves and pressure gauges.
Without control and switch cabinet.
Type: MUNSCH NP_B 65-50-125
REA-F
Manufacturer: Hager + Elsässer
Year of manufacture: 2015
Documentation: yes
Storage location: Warburg warehouse
Bykthuvsy0
Status: used / second hand
Flow rate: 30 m³/h (per pump)
delivery head: 15 m (per pump)
power: 4,0 kW ( 400 ...
5
CR 45-3-2 A-F-A-E-HQQE
- 11 KW
- H 51 meters
Btwxu70nmi
- H max. 67.2 meters
- 45 m3/h
- max.16 bar
- max. 120 ˋCelsius
Vertical, multistage centrifugal pump with opposite suction and discharge ports (inline design). The wetted parts of the pump are made of grey cast iron (head and foot piece) and stainless steel. The cartridge seal promises high reliability and ease of service. Power is transmitted via a rigid split coupling. The piping connection is made via combined DIN flanges.
The pump is e...
3
Cooling lubricant pump TG50-10/40 840 from Knoll
The offered cooling lubricant pump is a pure medium pump which can convey media with light contamination. This pump is able to supply machines with cleaned cooling lubricant (incl. residual dirt).
Advantages:
Very high efficiency due to aerodynamically favorably shaped impeller.
High load capacity due to solid shaft-hub connection.
Very long service life with robust cast iron casing.
Dry-running safety due to overhung shaft.
Long service life tha...
5
Centrifugal pump, water pump, multistage vertical centrifugal pump
-Max. Delivery rate: 8.0 m³/h
-Max. H: 64 m
G7pqoah
-Motor power: 3 kW
-Speed: 2840 rpm
-Number: 3x pumps available
-Price: per piece
-Weight: 45 kg/piece
4
0,55 kW 230/400 V 50 HZ
Dwgyuu
7
Art. No. : Pum 144
Item condition : unused, newly configured
Stock : 1
Available: immediately
Delivery volume: 15,5 m³/h
Delivery head: 40 m
Revolutions: 2950 rpm
Motor unused new
Make: ABB
Power: 5,5 KW
Bxjuzoqfww
Voltage: 3 x 400 Volt
Revolutions: 2900 u / min
5
Description: Several centrifugal pumps of different types from the company Lowara.
These pumps are untested, partly disassembled.
Single spare parts.
Manufacturer: Lowara
Documentation: no
Status: used - untested
Accessories: Type C0350/11K/A (3pcs.)
Pogfp
: 2007 (year of construction)
flow rate: 27 m³/h
delivery head: 6.8 - 14.3 m
Power: 1.1 kW
Revolutions: 2815 1/min
: 50 Hz
:
Accessories : Type C0500/22K/A (2pcs)
: 2007 (year of construction)
Delivery : 48 m³/h
Head: 7.7 - 17.3...
8
Spiral housing - Centrifugal pump
Manufacturer: KSB
Type: Etanorm-R G 200-250
RPM: 1465 rpm
Lifting height: 8m
Capacity: 520 m3 / h
Brygefclqi
Several pieces for sale!
Without electric motor!
Purchase, Acquisition, asset management of industrial equipment and machinery.
Wide Range of Used Machinery, Industrial Equipment
3
Cooling lubricant pump TG50-42/55 840 by Knoll
The offered cooling lubricant pump is a pure medium pump which can convey media with light contamination. This pump is able to supply machines with cleaned cooling lubricant (incl. residual dirt).
Advantages:
Very high efficiency due to aerodynamically favorably shaped impeller.
High load capacity due to solid shaft-hub connection.
Very long service life with robust cast iron casing.
Dry-running safety due to overhung shaft.
Long service life thank...
5
Centrifugal pump, acid pump, drain pump
-Motor power: 11 kW
-Speed: 1450 rpm
-Output: 40 m³/h
-Pipe connection inlet: DN80
-Pipe connection outlet: DN80
-Dimensions: 1550/550/H550 mm
-Weight: 240 kg
Qlla0glzw
12
The following article is for sale:
- Our offer number: 138/112
- Centrifugal pump with KSB PumpDrive system ( speed control )
- Manufacturer:KSB
- Type:NC 032-250 C11
- Serial number:9971786995
- Year of manufacture :12/2013
- Power :Engine 400/690V 50 HZ 7,5 KW
- Pump: 90m³/h H 9.5 m 2929 1/min
- KSB PumpDrive System
- Type :PumpDrive 5007K50AH0S12
- Serial number : 0410002563
- Year of construction : 12/2013
- Power :3PH 380/480Vac 50-60Hz 17,4 A 7,5 KW
- Dimensions:Total LxHxW 1,00 x 0,64 x 0...
4
Art. No. : Pum 140
Item condition : used
stock: 1
Available: immediately
delivery volume: up to 600 m³/h
Delivery height: up to 90 m
Pkxqr
revolutions: 1500 U / min
Impeller bronze ø 500 mm
Required motor power: 132 KW
7
Type: CN 080-200/3002
Manufacturer: K S B
Year of manufacture: 2011
Documentation: no
Storage location: Warburg warehouse
Status: used - satisfactory
flow rate: 180 m³/h (max.)
Bymhbanj8
Head: 41.55 m (max.)
connections: DN100 / DN80 (suction / pressure side)
Further info: (pump head and impeller made of cast steel (1.4408))
Voltage: 400 / 690 V
Current: 53 / 30.5 A
Power: 30.0 kW
Revolutions: 2950 1/min
Accessories: (butterfly valve with pneumatic actuator in DN150)
dimensions:
...
11
Grundfos TPD pumps are single-stage, tightly connected in-line
centrifugal two-head pumps,
with mechanical shaft seal and primarily for applications
such as heating / cooling / district power.
Type: TPD 80-330 / 2 A-F-A-BAQE
Technical
pump speed: 2930 rpm
Nominal flow: 85.6 m³ / h
Nominal lifting height: 25.9 m
Maximum lifting height: 33 m
Actual impeller diameter: 157 mm
Materials
Pump housing: Cast iron
Impeller: Cast iron
Material code: A
Installation
Ambient temperature range: -30...
15
We offer:
Centrifugal pump Speck TNH-65-LI-VE with motor 6.8kW vertical
It was part of a wallpaper production line. The pump has functioned up to the Stelligung.
4-5 stage centrifugal pump
Manufacturer:Speck Pumpe
Type:TNH-55-LI-VE
No.154915
Weight:ca 50kg
Electric motor: KMR 132 M4
Manufacturer:VEB Elektromotoren Werningerrode
No. 54 18932/23
Year of manufacture:1984
Power:6,8kW
1450 1/min
Voltage: 380V / 690V 3~ delta/star, 50 Hz, IP 44
Current: 14,5/8,4 delta/star
Bxnk8pfwpf
EEx tested
Weight...
4
Centrifugal pump, water pump, immersion pump
Ddd8tob9k
-Delivery rate: liters/min
-Max. H: m
-Motor power: 2.5 kW
-Speed: 2860 rpm
-Pipe connection inlet: DN 85
-Pipe connection outlet: DN 52
-Dimensions: 350/350/H730 mm
-Weight: 50 kg
13
The following article is for sale:
- Our offer number: 139/112
- Centrifugal pump with KSB PumpDrive system ( speed control )
Cvcje0k8
- Manufacturer:KSB
- Type:NC 032-250 C11
- Serial number:9971786995
- Year of manufacture :12/2013
- Power :Engine 400/690V 50 HZ 7,5 KW
- Pump: 90m³/h H 9.5 m 2929 1/min
- KSB PumpDrive System
- Type :PumpDrive 5007K50AH0S12
- Serial number : 0410002573
- Year of construction : 12/2013
- Power :3PH 380/480Vac 50-60Hz 17,4 A 7,5 KW
- Dimensions:Total LxHxW 1,00 x...
6
Art. No. : Pum 141
Ulbpud8r
Item condition : new
Stock : 1
Available: immediately
Delivery volume: 45-90 m³/h
Delivery head: 55-50 m Ws
Revolutions: 1470 rpm
Motor
Make: Stork
Power: 30 KW
Voltage: 3 x 400 Volt
Revolutions: 1470
Required motor power:
2 pieces in stock
Price per piece
4
Description: Pump station with two stainless steel centrifugal pumps connected in parallel and pre-piping on the pressure side, various fittings mounted on stainless steel base plate. The pump station was operated as a clean water pump station with the pressure belt filters #24847 and #24845 in a double filter system.
Type: ETACHROM BC 50 125
Manufacturer: KSB
Year of construction: 2002
Documentation: no
Storage location: Warehouse Warburg
Status: used - very good
Flow rate: 45 m³/h (per ...
7
KSB pump Etaline GN 11 032-160/074
Inline pumps and standard motor, three-phase motor mounted frequency inverter for stepless speed adjustment.
Areas of application:
Heating systems
Air conditioning systems
Domestic hot water systems
Water supply
industrial circulation systems
Conveyed goods
Liquids that are chemically and mechanically not attack the pump materials.
Operating data
Q see data sheet
See data sheet H
The data of this pump refer to the data sheet
(1) the sum of inlet pressure and...
4
Pump: centrifugal pumpManufacturer: VariscoType: J40/J1-110Year of construction: 2002Capacity: 10 m3 / 13m / - 20 m3Engine: SiemensKW: 1.1Voltage: 380 VSpeed: 2850 RPMConnection inlet DN 40Port side: DN 40Machine number: 107921Dimensions: length 700 mmProduct-contacting parts: stainless steel
Mz28b
5
Centrifugal pump, acid pump, drain pump
-Motor power: 11 kW
-Speed: 1440 rpm
-Output: 40 m³/h
-Pipe connection inlet: DN80
-Pipe connection outlet: DN80
-Dimensions: 1550/550/H550 mm
Hirhnlnku
-Weight: 240 kg
