Used Grundfos Pumps for sale (69)

Condition: used, Grundfos Vertical Water Pump Complete with isolator valve Power isolator switch 1.5 kw Fgsdsz E Nhvepfx Anvsi 5.7 m3/hr H max 60m

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA Fjdpfx Anoyug R Revjgi • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multi-stage centrifugal pump with opposed suction and discharge connections (inline design). The pump components that come into contact with the fluid are made of high-quality stainless steel. The cartridge seal guarantees high reliability and ease of maintenance. Power transmission is achieved via a rigid, split coupling. The pipeline connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer's product group: Vertical centrifugal pumps Manufacturer's product range: Vertical centrifugal pump CRN Manufacturer's article number: 96122358 Connection, inlet side: Flange Connection, outlet side: Flange Connection standard, inlet side: EN 1092-2 Fgedpswbfigsfx Anvoi Nominal diameter, connection, outlet side: DN 65 Design: Vertical Speed: 2924 rpm Motor output power: 11.0 kW Protection class: IP55 Max. delivery head: 90.2 m Max. working pressure: 16 bar Weight: 193.2 kg List price: 14,844.00 € More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Grundfos Circulation Pump TPED 50-160 / 2-S AFA-BAQE 1.1kW, Twin Pump Pump *New Price €6500 *New price €6500 AREAS OF APPLICATION - Heating systems - Local domestic hot water systems - Cooling and air conditioning systems FEATURES AND BENEFITS - Low power consumption - Adjustment according to existing operating conditions - Easy to install Technical data: Fsdpfx Anjfuappovsgi Rotation frequency 2900 rpm Nominal flow rate 17 m³/h Nominal head 12 m Max. hydrostatic head 160 dm Shaft seal BAQE Liquids: Working fluid Water Fluid temperature range 0 .. 120 °C Temperature. Liquids 20 °C Density 998.2 kg/m³ Materials: Pump housing Cast iron EN-JL1040 ASTM A48-40 B Impeller Cast iron EN-JL1030 ASTM A48-30 B Electrical data: Motor type 80B Number of poles 2 Rated power - P2 2 x 1.1 kW Industrial frequency 50 Hz Rated voltage 3 x 380-500 V Rated current 2.15-1.80 A Cos (power factor) 0.91-0.82 Rated speed 360-4000 rpm Energy efficiency 88.5% Protection class (IEC 34-5) IP55 Insulation class (IEC 85) F Motor protection Yes Motor number 98362352 Mounting: Maximum ambient temperature 50 °C Max. operating pressure 16 bar Max. pressure at a given temperature 16 bar / 120 °C Standard flange DIN Connection code F Pipe connection DN 50 Permissible pressure PN 16 Mounting length 340 mm Motor flange size FF165 Net weight 95 kg Data sheet

Condition: new, functionality: unexamined, Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens INDUSTRIAL PUMP GRUNDFOS CR15-5 5.5 kW – VERTICAL MULTISTAGE 400V SIEMENS IE4 The GRUNDFOS CR15-5 K-F-A-E-HQQE is a professional, vertical multistage centrifugal pump designed for industrial installations, pressure boosting systems, water supply systems, and technological systems. Fgodpfx Ae Aibhconvei Equipped with an energy-efficient Siemens / Innomotics IE4 motor with a power of 5.5 kW, it provides high performance and efficient operation in demanding water installations. Original Grundfos pump – catalog number 93138502, manufactured in Denmark. Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Manufacturer code: CR15-5 K-F-A-E-HQQE KEY ADVANTAGES Flow rate: 17 m³/h (17,000 l/h) – suitable for industrial and water installations. Maximum head: 74.6 m – for systems requiring high pressure. Power: 5.5 kW, power supply: 400V – three-phase Siemens IE4 motor. Maximum pressure: 16 bar – robust industrial design. Vertical multistage pump – compact design. Hydraulic components made of stainless steel – durability and corrosion resistance. Mechanical seal: HQQE – professional Grundfos solution. Protection class: IP55 – motor adapted for industrial operation. Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Brand: Grundfos TECHNICAL DATA GRUNDFOS CR15-5 Manufacturer: Grundfos Model: CR15-5 K-F-A-E-HQQE Product number: 93138502 Type: centrifugal pump, vertical, multistage Motor power: 5.5 kW / 5500 W Flow rate (from nameplate): 17.0 m³/h Head H: 61.8 m Maximum head Hmax: 74.6 m Maximum pressure: 16 bar Maximum liquid temperature: 120°C Pump speed: 2919 rpm Frequency: 50 Hz Seal: HQQE Country of manufacture: Denmark Operating mode: S1 – continuous Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Type: other APPLICATION OF THE INDUSTRIAL PUMP The Grundfos CR15-5 pressure pump can be used in: booster sets and pressure boosting systems, water supply and industrial installations, water treatment and filtration systems, cooling installations and technological circuits, industrial washing systems, HVAC installations and circulation systems, production lines and process installations. Pump selection requires consideration of the hydraulic characteristics of the installation and the type of fluid.

Condition: new, Year of construction: 2022, functionality: fully functional, NEW Grundfos Pump CRN 10-12 A-FGJ-G-E-HQQE | Stainless Steel AISI 316 | 4 kW Condition: Brand new, never used. Model: CRN 10-12 A-FGJ-G-E-HQQE Manufacturer: Grundfos (Leading pump solutions provider) DEVICE DESCRIPTION Fgsdpfx Asx Im Ahjnvei The item for sale is a high-performance, vertical multistage centrifugal pump from the CRN series. This is a version made entirely from acid-resistant stainless steel (AISI 316), setting it apart from the standard cast iron models (CR). It is designed for operation in the most demanding industrial conditions, ensuring reliability when handling aggressive and demanding liquids. The pump is an ideal solution for businesses seeking a high-efficiency device, ready for immediate installation in water treatment systems, technological processes, or high-pressure setups. _____ KEY TECHNICAL DATA • Rated flow: 10 m3/h • Rated head: approx. 96.7 m (max up to 122 m) • Motor power: 4 kW • Power supply: 3-phase • Rotational speed: 2900 rpm • Maximum operating pressure: 25 bar • Liquid temperature range: -20°C to +120°C • Number of impellers: 12 • Year of manufacture: 2022 CONSTRUCTION AND MATERIALS • Material configuration (G): All liquid-contacting parts are made from stainless steel EN 1.4401 / AISI 316 (providing maximum corrosion resistance). • Shaft seal (HQQE): Durable cartridge mechanical seal made from silicon carbide (SiC/SiC) with EPDM elastomers. Guarantees longevity and leak-tight operation even with hot water. • Connection (FGJ): Universal flanged system (DIN/ANSI/JIS), allowing easy adaptation in existing installations. _____ APPLICATIONS Thanks to its acid-resistant construction, the CRN pump is suitable for: 1. Chemical and pharmaceutical industries (pumping acids, alkalis, aggressive media). 2. Filtration and water treatment systems (reverse osmosis, ultrafiltration). 3. Industrial washing systems and CIP/SIP cleaning setups. 4. Process water installations in brewing, dairy, and food industry. _____ WHY BUY THIS PUMP? • Premium product: The CRN series is the “Mercedes” among vertical pumps. • Time-saving: Device is available immediately (no long lead times from the manufacturer). • No usage marks: The pump is brand new, properly stored, and ready to operate at full capacity. Important: Please verify that the electrical and hydraulic parameters match your project requirements before purchase.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs Fgedpfx Asyug Hxonvsi • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: good (used), Item: D-1903-Grundfos pump CR8-30 Water pump, Grundfos, used! Type P2-140 K Capacity 2.000 l, 90 m. Fgodpfx Anoirfbljvei 1,1 kW

Condition: used, Submersible Pump, Multi-stage Centrifugal Pump, Grundfos SP27-19, Used Machine Manufacturer: Grundfos Type: SP 27-19 Technical Specifications: Nominal Flow Rate (Q): 14–36 m³/h Maximum Head (H max): 172 meters Motor Power: 15 kW Electrical Data: 380V / 50 Hz Weight: 100 kg Fodpfeyz Tphjx Anvegi Dimensions: Overall Dimensions: 2300 mm (Length) x 131 mm (Diameter Ø) Recommended Operating Range: Equipped with a 15 kW motor, this pump is ideal for applications requiring water delivery from depths or to heights between 100 and 140 meters. Within this range, the 15 kW motor operates with optimal efficiency and maximum reliability.

Condition: like new (used), Grundfos NB65-250/254 Centrifugal volute pump Unused in box, Single stage non self priming centrifugal volute end suction pump, 5.5Kw, 1470 RMP, flow rate 69.5 m3h, 3Ph Fjdo Ad Rgqspfx Anvogi

Condition: like new (used), Grundfos NB65-250/254 Centrifugal volute pump Unused in box, Single stage non self priming centrifugal volute end suction pump, 5.5Kw, 1470 RMP, flow rate 69.5 m3h, 3Ph Fjdpfx Aj Ad Rg Ronvegi

Condition: excellent (used), Grundfos CRIE20-3 Multistage centrifugal pump Unused, Vertical Multistage centrifugal pump, with built in frequency converter enabling continuously variable control of the motor speed, 65mm inlet and outlet, 5.5Kw motor, 3Ph Fedpfs Ad Rf Hjx Anvjgi

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Fedjz Slx Tspfx Anvjgi Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Technical data Manufacturer: Grundfos Model: CRN5-11 A-P-A-E-HQQE Motor power: 2.2 kW Frequency: 50 Hz Fsdez Slq Aopfx Anvsgi Rotational speed: 2899 rpm Capacity: 5.8 m³/h Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: good (used), Grundfos NB65-125/137 Centrifugal volute pump Fedpj Ad Rbzjfx Anvsgi Single stage centrifugal volute pump, 7.5Kw, 2910 RMP, 1916 Ltr/min, 3Ph

Condition: used, Vertical multistage high-pressure centrifugal pump GRUNDFOS Type CR8-80 A-A-A-BUBE Model B4250008 P1 9535 Year of manufacture 1995 Fedpfs Ahzl Sjx Anvogi Nominal flow rate 9.5 m³/h Nominal head 67 meters = 6.7 bar Pump pressure max. 16 bar Operating temperature max. 120 °C Nominal speed 2900 rpm Motor power 3 kW Mains connection 400 volts, 50 Hz - Pump design with 8 stages - Pump components made of stainless steel 1.4301, pump base made of cast iron - Connection flanges DN 40 - Suitable for potable water supply, irrigation and drainage Space requirement pump L x W x H 250 x 200 x 870 mm Weight 50 kg Very good condition, overhauled from stock, not used after overhaul Not a submersible pump or a deep well pump.

Year of construction: 2023, condition: used, Pump unit Manufacturer: Grundfos Type: MTR20-8/8 A-W-I-HQQV Year of manufacture: 2023 Technical data: - Pump speed: 2,924 rpm - Rated flow rate: 21 m³/h - Rated head: 95.1 m - Pump power: 11 kW In our assessment, the pump is in good used condition. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Fsdpfx Ajzbvgujnvsgi Subject to technical changes, errors, and prior sale.

Condition: as good as new (ex-display), Article description: Fedpfxez Ing Ne Anvegi Grundfos block pump NB50-160/167 A-F2-A-BQQV MG160MB2-42FF300-H3 ----- Condition of the article: Very good condition – unused, new stock. Internal number: LS5

Condition: like new (used), Grundfos MGE100LA 2-FF215-JA-300 pump 3.00 kW Speed: 2900 - 4000 rpm Weight: 24 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. Fgjdpjzzmhzefx Anvsi For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: new, functionality: fully functional, overall weight: 260 kg, volume flow: 65.3 m³/h, power: 22 kW (29.91 HP), GRUNDFOS NKE 40-250/255 stainless steel centrifugal pump – 22 kW – integrated VFD – new/unused New, unused Grundfos industrial centrifugal pump with integrated variable frequency drive. Complete assembly with motor, coupling, coupling guard and steel baseplate. Stainless steel pump casing and impeller, suitable for water transfer and various industrial pumping applications. Technical specifications: Fjdj Aaw Rhspfx Anvsgi Type: NKE 40-250/255 A2F2KE-SBQQE Product number: 97701889 Motor: Grundfos MGE, 22 kW Supply: three-phase 380–480 V, 50/60 Hz Nameplate duty point: 65.3 m³/h at 78 m head Speed at stated duty point: 2,940 rpm Nameplate pressure/temperature rating: 16 bar / 120 °C Stainless steel casing and impeller: EN 1.4408 Shaft seal: BQQE Motor efficiency: IE3, 92.7% Protection rating: IP55; insulation class F Control interface: PUMP I/O, GENI/RS485 Condition: new/unused surplus stock. Supplied as pictured.

Condition: used, Year of construction: 2021, Grundfos Dry-Running Pump, electronically controlled TPE3 40-80 S-A-F-A-BQQE-CDB Art. 99272194 Single-stage in-line pumps with speed-controlled MGE motor PN16. 3 x 380-500 V DN100 with MGE90SC 2-56C-IA-150 motor P.C.: 2114 We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but operational. The pump was functioning perfectly up until removal a few weeks ago. Manufacturer: Grundfos Type: TPE3 40-80 S-A-F-A-BQQE-CDB Description: Single-stage in-line pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2970 rpm Rated flow: 12.3 m³/h Rated head: 5.4 m Mechanical seal: BQQE Pump casing: cast iron Impeller: cast iron Gross weight: 41 kg For further technical details, please refer to the nameplate. Scope of delivery as pictured Inspection prior to purchase is possible and expressly encouraged. #Shelf 11-1-9 Fjdpoyf Hf Nofx Anvsgi Shipping possible, but the buyer bears shipping costs. Worldwide shipping available.

Condition: new, Grundfos MTS20-80 R46 DQ – Industrial Screw Pump – 7.5 kW Original Grundfos MTS20-80 R46 DQ industrial screw pump, complete with a 7.5 kW IE3 electric motor. New and unused, supplied in original transport packaging. Technical Specifications: * Manufacturer: Grundfos * Model: MTS20-80 R46-DQ-T Fjde Afn Nrepfx Anvogi * Product number: 99186029 * Pump type: Industrial Screw Pump * Motor power: 7.5 kW / 10 HP * Voltage: 3 × 380–415 V * Frequency: 50 Hz * Motor speed: 2,910–2,920 rpm * Efficiency class: IE3 * Protection class: IP55 * Weight: 102 kg (including packaging) * Condition: New / Unused Suitable for industrial machinery, coolant circulation, metalworking equipment, and lubrication systems. Stock availability: 10 units. Location: Botlek Rotterdam, The Netherlands Delivery terms: EXW (Ex Works) Shipping can be arranged upon request. Please contact us for further information or a quotation.

Condition: used, functionality: unexamined, machine/vehicle number: MTRE 15-9/5 | 10-10/10 | 5-10/10, Used Grundfos MGE112MC2 Centrifugal Water Pumps Manufacturer: Grundfos Fodoxphqtepfx Anvjgi Various configurations: Pump MTRE 15-9/5 | Controller MGE112MC2 Pump MTRE 10-10/10 | Controller MGE132SD2 Pump MTRE 10-10/10 | Controller MGE112SB2 Pump MTRE 5-10/10 | Controller MGE1100LC2 Weight: varies from 42 to 74 kg. Power: ranges from 4.0 to 7.5 kW Voltage: 50/60 Hz, 380-400 Volt.

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Fgsdpehy Nx Ejfx Anvsi Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Fgedpfjyc T Apjx Anvoi Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.