Used Gildemeister Gds 65 for sale (247)

Condition: like new (used), Year of construction: 2001, Gildemeister NEF 320 K Cycle-Controlled Lathe Siemens Sinumerik 810 DL Control Year of Manufacture: 2001 Very Good Original Condition Technical Specifications: Year of manufacture: 2001 Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Centre distance: 750 mm Cross travel: 185 mm Feed X: 4 m/min Feed Y: 4 m/min Rapid traverse X: 8 m/min Rapid traverse Y: 10 m/min Spindle nose DIN 55027 size 6 Spindle bore: 52 mm Drive power (100%): 7 kW Speed range: 14–3550 rpm (2 ranges) Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: ISO MK 5 Dimensions: 2600 x 1440 x 1440 mm Machine weight approx.: 2.0 t Ksdpfx Aaowx Rbpsmonc Accessories and Equipment: About the Machine: Offered here is a Gildemeister NEF 320 K cycle-controlled lathe with cycle control, year 2001, in very good original condition. The machine is, of course, fully operational. The slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is very user-friendly and allows for surface finishes similar to grinding. The machine comes from a training workshop of a large industrial company. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: used, Gildemeister italiana GD16 with LNS loading magazine Main spindle & capacities: Kedpsy D Nw Tsfx Aamenc - Max. turning diameter: 16 mm - Max. spindle bore: 16 mm - Max. turning length: 160 mm - Max. spindle speed: 8,000 rpm - Spindle power: 1.5 kW to 2.2 kW Axes & feed rate: - Rapid traverse: 30 m/min - Control system: GE FANUC Series 18i-T Dimensions & connection values: - Total power requirement: approx. 2.2 kW to 5 kW - Machine weight: approx. 1,600 kg to 2,100 kg - Machine dimensions: approx. 1,100 mm (width) × 1,800 mm (height)

Condition: good (used), Year of construction: 2002, Gildemeister NEF 520 K Gildemeister NEF 520 K Cycle-Controlled Lathe with Siemens Sinumerik 810 DL Control, year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Details Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 1,250 mm Control: Siemens Simatic Cross slide travel: 260 mm Distance between centers: 1,500 mm Main Spindle: Speed range – main spindle: 8 - 3,000 rpm Drive power – main spindle: 12 kW Max. torque: 920 Nm Gear stages: 2 Spindle nose: No. 8 DIN55027 Spindle diameter in front bearing: 120 mm Max. bar capacity: 62 mm Spindle mount: ME80 Chuck diameter: 250 mm Tool Turret: Tool system: MultiFIX - C Tailstock: Kjdpfxow Iqd Ij Aamonc Quill diameter: 80 mm Quill taper: MT 5 Quill stroke: 180 mm Feed Rates: Rapid traverse x/z: 4 / 6 m/min Feed force x/z: 5 / 10 kN Total power requirement: 28 kVA Machine weight approx.: 3.0 t Space requirements approx.: 3.5 x 2.5 x 2.0 m Accessories and Equipment: 1 coolant system About the machine: We are offering a Gildemeister NEF 520 K cycle-controlled lathe, year of manufacture 2012, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is extremely user-friendly and can produce surface finishes comparable to grinding. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm - 12-station turret, no driven tools Knedozggahjpfx Aamjc - Tool holder VDI 30 - Tailstock - Chip conveyor

Condition: excellent (used), For sale: GILDEMEISTER CTX 410 V3 CNC LATHE with driven tools Knodezu Dfqopfx Aamsc TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 positions for VDI-30 tool holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Tailstock - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - Coolant system - Hydraulic collet chuck on the main spindle (can be replaced with 3-jaw chuck) - Main spindle with through-hole (bore diameter: 66 mm) - Finished parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection. Fully operational and ready to work—currently connected and available for demonstration. About the company: Stal-Com has been trading, servicing, and providing training on DMG Group CNC machines for over 20 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. Every machine undergoes a thorough technical inspection. We supply not only customers in Poland, but also across Europe and parts of Asia. Each machine can be inspected live in production, as we also provide subcontract machining services. After purchase, we provide operator training and can help set up production at the customer’s facility. We work with many clients under long-term partnerships, supplying additional machines as needed.

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) Ksdpozcd Hlefx Aamjnc - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: ready for operation (used), Year of construction: 1995, Make: GILDEMEISTER Type of machine: NEF Plus 500 Year of manufacture: 1995 Control system: Gründig Machine's weight: 2650 kg Speed range: 8 - 2800 1/ min Cutting diameter: 500 mm Turning length: 1000 mm Overall dimensions: 2500 x 1750 x 1850 mm Kodetpn S Ijpfx Aamenc Spindle opening: 70 mm

Condition: used, Gildemeister CTX 320 Linear V6 with Y axis New 2005. FANUC 18T . Collet chuck Supplied with no collets, the original 3 jaw chuck will be supplied. there is also the option to supply a bar feed unit (Imeca VIP 70CNC, year 2001) which is compatible for the machine, however currently not set up. VDI and Driven Tooling Supplied as per images - Note Filtermist Unit will not be supplied Kjdsztb Tcspfx Aamenc

Condition: used, Year of construction: 2008, chucking diameter 200/250/315 mm bar material dia. 65/90 mm spindle bore 79/100 mm control Siemens 840D powerline weight of the machine ca. 6 t dimensions of the machine ca. 4350x2460x2080 m Working area Circulation dia. above bed slide way cover: 680mm Circulation dia. above cross guide cover: 565 mm Facing traverse: 324 mm Longitudinal path: 600 mm Main spindle Spindle nose dia: 170 h5 / 220 h5 mm Bar dia. Max: 65 / 90 mm Spindle nose dia. in front bearing: 120 / 150 mm Spindle boring: 79 / 110 mm Chuck dia: 200 / 250 / 315 mm Drive rating S1 100% duty cycle: 25 / 33 kW Rotational speed range: 5000 / 4000 r.p.m Max. torque S1 100% duty cycle: 270 / 375 Nm Salient rotational speed: 900 / 850 r.p.m C axis (main spindle) Rotational speed: 250 r.p.m Stopping torque: 200 Nm Division accuracy: 0,025 deg. Compound slide X/Z/Y Facing traverse X: 260 / 1852 mm Longitudinal path Z: 635 / 6202 mm Ball spindle Z (dxh): 40x15 mm Vertical path Y: ±40 mm Ball spindle Y (dxh): 40x5 mm Rapid traverse speed X/Y/Z: 60/15/45 m/min Feed force X/Y/Z: 3,5/7/7 kN Tool holder Number of tool stations: 12 Tool mounting cylinder shaft (DIN 69880): 40 mm Tool disk, axial tool holder pitch circle dia: 370 mm Number of driven tools: 12 Drive rating max. 100% duty cycle: 4,9 kW Torque 100% duty cycle: 10,5 Nm Rotational speed range: 4500 r.p.m Tailstock Tailstock traverse path: 580 mm Tailstock force: 8 kN Tailstock mounting: MT 5 Rapid traverse speed Z2: 6 m/min Part accuracy for positioning: =/< 10 mm Hydraulic Contents: 40 l Pump capacity: 2,2 kW Max. pressure: 80 bar Pressure for clamping unit, tailstock: 10-60 bar Coolant unit Contents: 210 l Pump capacity: 1,7 kW Feed rate at 6 bar: 20 l/min Electrical energy requirement Kedpfxsya Iire Aamonc Connected rating: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuses (slow blow/VDE 0100) perm: 80 A Voltage fluctuations at 400 V: 6% - 10% Machine dimensions Dimensions (LxWxH) with chip conveyor: 4350/2460/2080 mm Weight without chip conveyor/chip bath: ca. 6.000 kg Workplace based constant noise pressure level: - (DIN 45635 part 1-04.85 (ISO 3740-1980), measured as a chip removing cycle as per DIN 45635 part 1601-07.78): 77 db (A) - in idle running as per DIN 45635 part 1601-07.78: 78 db (A)

Condition: used, Multispindle lathe GILDEMEISTER GS 20-6 Knsdozq Hrlepfx Aamoc

Condition: used, Year of construction: 2002, Lathe Gildemeister Gildemeister NEF 320K, year of manufacture 2002. Kedpezu Aqlsfx Aamonc

Condition: used, Pick-up truck pick-up control unit Pietro Cucchi full-body loader Knjdjzi U H Ijpfx Aamjc

Condition: used, Year of construction: 2000, Gildemeister CTX 400 S2 Year of manufacture: 2000 2-axis machine (X and Z) 12-tool turret, VDI30 Fanuc 21iT control system Tailstock Chip conveyor included Knodpfx Aaezgupksmec Very good condition, machine comes from a school Operating hours: 14,000

Condition: good (used), Year of construction: 1990, Maximum height 250 mm Turning length 640 mm Maximum turning diameter over the bed cover 500 mm Maximum turning diameter over the compound slide 290 mm Spindle head according to DIN Size 140 h5 Spindle bore 72 mm Speed range 25 – 5000 rpm Feed rate range, longitudinal and transverse 0.5 – 5000 mm/min Rapid traverse, longitudinal 15 m/min ditto, transverse 10 m/min Main drive 22 kW Dimensions with chip conveyor L x W x H 4527 x 1940 x 1730 mm Knjdpez I Ubmsfx Aamoc Weight with chip conveyor 5140 kg This machine does not have a tailstock! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2000. This Gildemeister CTX 500 S2 features a maximum turning diameter of 455 mm and a turning length of 1097 mm. It includes a robust tool system with a disc turret and a maximum chuck diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 500 S2 machine we have for sale. Contact us for further details. - Max. Swing Over Bed / Slide: 680 mm / 670 mm- Max. Turning Diameter over Face Slide: 455 mm- Max. Turning Length: 1097 mm / 2097 mm- Spindle Head Flange: 220 mm (Size 220h5)- Spindle Bore: 107 mm- Spindle Bearing Front Diameter: 140 mm- Max. Chuck Diameter: 315 mm / 400 mm- Tailstock Quill Taper: MK 5 / MK 6- Tailstock Quill Diameter: 120 mm- Tailstock Quill Stroke: 120 mm- Tool System: Disc Turret- Number of Slide Carriage Sets: 1- Number of Face Slides: 1- Longitudinal Stroke: 1097 mm / 2097 mm- Face Stroke: 320 mm- Max. Torque: 650 Nm / 2000 Nm- Feed Force (Longitudinal / Plan): 1 N / 8000 N- Rapid Feed (Longitudinal / Plan): 30 m/min / 24 m/min- Feed Speed Range: mm/min- Main Drive Motor Type: B3- Feed Drive X-Plan Motor: Siemens 1FK6063-6AF71-1AH0 (1.9 kW, 3000 rpm, IP64)- Feed Drive Z-Longitudinal Motor: Siemens 1FK6101-8AF71-1AG0 (4.9 kW, 3000 rpm, IP64)- Lubrication Motor: Vögele 113.50.000701C (0.13 kW, 2200 rpm, IP44)- Hydraulic Motor: 2.2 kW, 1450 rpm, IP54- Connected Load / Power Requirement: 58 kVA- Voltage: 400 V- Frequency: 50 Hz- Current: 85 A- Fuse Rating: 100 A- Control Voltage: 230 V AC / 24 V DC- Floor Space Required: 8.41 m x 4.3 m x 2.41 m (5607/6657 x 3285 x 2405 mm)- Machine Weight: 8700 kg / 10000 kg- Additional Equipment: Chip conveyor with chip container, coolant system, exhaust filter unit (IFM) Technical Specification Counter Spindle No Knjdpfxez Iqnpj Aamec Driven Tools Yes

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 04780000161, Sales location: Landgrafenstraße 45, 41069 Mönchengladbach Machine: Twin 500 Machine number: 04780000161 Year of manufacture: 2001 Siemens 840 D Main spindle: 45 kW, 3200 rpm, swing: 610 mm, spindle distance: 1850 mm Counter spindle: 45 kW, 320 rpm Travel ranges: Saddle 1 X-axis: 605 mm Knsdpjzn H Dvefx Aamsc Y-axis: 210 mm B-axis: 240° Z-axis: 1470 mm Turning/milling spindle: 10 kW, HSK 63, 12000 rpm Saddle 2 X-axis: 267 mm Z-axis: 1440 mm Turret Saddle 3 Z-axis: 1460 mm Tool magazine: 80 positions

Condition: used, Year of construction: 2005, turning diameter 680 mm Knedpfx Aszgxfvjamec turning length 600-635 mm control Siemens weight of the machine ca. 6500 kg

Condition: good (used), Year of construction: 2001, Machine is in good working condition. Parts shown by hand not come. Knjdpfx Aaez Uvpmomec

Condition: good (used), CNC turning and milling center with bar loader, FMB Turbo 3000 Knsdpfx Aaoz Eayiomsc Turning diameter over machine bed: 400 mm Turning diameter over cross slide: 225 mm Turning length: 640 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), CNC turning and milling center with bar feeder FMB Turbo 3000 Kedpfx Aaez Eaxrjmjnc Turning diameter over the machine bed: 280 mm Turning diameter over the cross slide: 185 mm Turning length: 250 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, spindle motor power: 3,700 W, controller manufacturer: FANUC, controller model: Series 18-i-T, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Gildemeister GP 50 was manufactured in 2004. It features a twin-spindle configuration with independent electrospindles and a continuous C-axis on both spindles. The machine includes two independent Sauter turrets with a total of 24 tool positions, all suitable for driven tools. If you are looking to get high-quality turning capabilities, consider the Gildemeister GP 50 horizontal turning machine we have for sale. Contact us for further details. • Y-axis: No • B-axis: Yes (associated with sub-spindle) • C-axis: Continuous on both spindles • Spindles: • Main spindle: Independent electrospindle with continuous C-axis • Sub-spindle: Independent electrospindle with continuous C-axis • Twin-spindle configuration • Bar passage (main spindle): 50 mm • Turrets / driven tools: • 2 independent Sauter turrets • Tool stations: 12 + 12 (24 total), all positions suitable for driven tools • Driven tools: Yes (both turrets) • Main spindle turret: 12 driven tool positions • Sub-spindle turret: 12 driven tool positions • Machine configuration: • 5-axis configuration Ksdpfx Aasz D E Amomsnc • No Y-axis • B-axis with sub-spindle • Independent main and sub-spindle • Twin independent turret configuration • 24 total tool stations • Driven tooling on both turrets Additional equipment • Bar feeder: Top Automazioni • Bar feeder passage: 70 mm • Automatic bar feeding system • Tooling / accessories included: • 12 tool holders for 20 × 20 mm or 25 × 25 mm square tools • 4 radial driven tool holders • 2 axial driven tool holders, 90° • 10 drill holders, 90° • Approx. 60 spindle collets in various diameters • Collet types: BA60 and BA52 • Collets for Top Automazioni bar feeder Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning-milling center GILDEMEISTER GMX 400 linear with Y-axis and milling spindle Year of manufacture: 2003 Control system: Sinumerik Powerline Technical data: Drive power main spindle ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar diameter: 90 mm Kodpfx Aewzbq Tsamonc Number of magazine slots: 120 pcs. Tool holder for milling spindle: HSK 63 Drive power counter spindle ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar diameter: 90 mm B-axis / milling spindle: Drive power: Speed: Torque: Tool holder: HSK 63 Y-axis: +/- 110 B-axis: +/- 120° Lower turret: X-axis: Z-axis: Speed of driven tools: Number of turret slots: 12 pcs. Tool holder: VDI 40 Accessories: - Chip conveyor - High-pressure system with 20 bar - Preparation for 3D measuring probe - Tailstock function for counter spindle - Automatic sliding doors

Condition: new, Year of construction: 2024, Safety glass window for a Gildemeister CTX Beta 500 V4, item in original packaging, unused and new. Knedpfx Aaeyx U Slemec

Condition: used, Multispindle lathe GILDEMEISTER GM 20 AC Knsdpfx Aaezpzm Uemsc

Condition: excellent (used), Year of construction: 1993, operating hours: 2,859 h, functionality: fully functional, turning length: 600 mm, turning diameter: 290 mm, Universal Lathe – GILDEMEISTER CTX Year of manufacture: 1993 Operating hours: 2,859 h • 12-position turret tool holder • Max. spindle speed: 5,000 rpm • Max. turning diameter (X axis): 290 mm Knodpfx Aasyxgi Njmjc • Max. turning length (Z axis): 600 mm • Hydraulic 3-jaw chuck, Ø 200 mm • Spindle bore: Ø 66 mm • Chip conveyor included The machine is in very good condition and was previously used in a technical training facility.